Yealink CPE860 Quick Start Up Manual

TPG BizPhone

P a g e | 1 of 2

CPE860 IP Conference Phone
Quick Startup Guide

Packaging Contents

The following contents are included in your CPE860 package:

Assembling the Phone

1. Connect the network and power, as shown below:

You have two options for network and power connections:
AC Power option or PoE option.

2. Connect the optional USB flash drive, as shown below:

3. Connect the optional expansion microphone, as shown

below:

4. Connect the optional PC or mobile device, as shown

below:

Note: The above packaging content is only applicable if
you order a BizPhone Conference Plan.
If you order a BizPhone Conference Plus Plan, it will also
come with 2 x expansion microphones (CPE80).

Note: Up to two expansion microphones can
be connected to an IP conference phone.

P a g e | 2 of 2

Startup the Phone

After the IP Phone is connected to the network and supplied with
power, it automatically begins the initialisation process. After
startup, the phone is ready to use (pre-configured).

HANDSET SETTINGS

Add a Contact

 Press the Directory soft key when the phone is idle, and then

select the All Contacts.

 Press the Add soft key to add a contact.
 Enter a unique contact name in the Name field and contact

numbers in the corresponding fields.

 Press the Add soft key to accept the change.

Delete a Contact

 Press the Directory soft key when the phone is idle, and then

select All Contacts.

 Press or to select the desired contact, press the

Option soft key and then select Delete.

 Press the Ok soft key when the LCD screen prompts “Delete

Selected Items?”

Edit a Contact

 Press the Directory soft key when the phone is idle, and then

select All Contacts.

 Press or to select the desired contact, press the

Option soft key and then select Detail.

 Edit the contact information.
 Press the Save soft key to accept the change.

Volume Adjustment

 Press during a call to adjust the receiver

volume of the speaker.

 Press when the handset is idle to adjust the

ringer volume.

BASIC CALL FEATURES

Placing Calls

Do one of the following:

- Press .
Enter the number, and then press , , or the Send soft

key.

- Enter the number.
Press , , or the Send soft key.

Answering Calls

Press , , or the Answer soft key.

Ending Calls

Press or the End Call soft key.

Call Hold

Press the Hold soft key during an active call.

Call Resume

 If there is only a call on hold, press the Resume soft key.
 If there are two calls on hold, press or to select the

desired call , and then press the Resume soft key.

Call Mute and Un-Mute

 Press to mute the microphone during a call.
 Press again to un-mute the call.

Local Conference

CPE860 can host up to five-way conference call with other
parties.

To create a three-way local conference:

 Press the Conf soft key during an active call. The call is

placed on hold.

 Enter the number of the second party, and then press the

Send soft key.

 Press the Conf soft key again when the second party

answers.

To join more parties in an established conference call:

 Press the Manage soft key after the conference call is

established.

 Press the NewCall soft key to place a new call.
 Enter the number of the new party, and then press , ,

or the Send soft key.

 Press the Conf soft key when the party answers:
 Repeat above steps to join more parties in the established

conference call.

During the conference call, you can do the following:

- Press the Hold soft key to place the conference on hold.

- Press the Split soft key to split the conference call into
individual calls on hold.

- Press the Manage soft key, and then press or to
select the desired party:

o Press the Far Mute soft key to forbid the selected party

from speaking. The muted party can hear everyone,
but no one can hear the muted party.

o Press the Remove soft key to remove the selected

party from the conference call.

Press the NewCall soft key to place a new call.
o Press the Back soft key to return to the previous

screen.

- Press to mute the conference call.

- Press or the EndCall soft key to drop the conference
call.

NOTE: For more information about other IP Conference Phone features, refer to the BizPhone CPE860 IP Conference Phone User Guide

(contact your Administrator)