YEALINK CP930W User Manual
DECT Conference Phone
CP930W-Base&CP930W
Quick Start Guide(V83.10)
For W60B firmware: 77.83.0.20 or later
For CP930W firmware: 87.83.0.10 or later
CP930W-Base Package Contents
CP930W
2 Power Adapters
Note: Yealink CP930W-Base DECT conference phone consists of one W60B base station and one
CP930W.
W60B Base Station Base Stand
Quick Start Guide
Ethernet Cable
Charger Cradle
CP930W Package Contents
CP930W
1
Charger Cradle
Power Adapter
W60B Package Contents
W60B Base Station Base Stand
Power Adapter Ethernet Cable
Quick Start Guide
Assembling the DECT Phone
1. Connect the base station power and the network using method a or method b.
a. AC Power Option b. PoE (Power Over Ethernet) Option
Note:
• If you choose method a, use Yealink-supplied power adapter (5V/600mA). A third-party
power adapter may damage the base station.
• If you choose method b, you do not need to connect the power adapter. Make sure the
hub/switch is PoE-compliant.
2a. (Desktop Installation) Attach and remove the base stand.
Attach the Base Stand Remove the Base Stand
M
M
A
C
S
N
M
A
C
S
N
A
C
S
N
Align the snap-fits with the corresponding holes
and push forward, snapping them into the holes.
Remove the snap-fits from the
holes horizontally.
2
2b. (Wall-Mount Installation) Attach the base station.
MAC
SN
M
A
C
SN
59mm
59mm
4. Connect the charger cradle and charge the CP930W.
Note:
• Use Yealink-supplied power adapter (12V/2A). A third-party power adapter may damage
the DECT conference phone.
• Check the charging status on the top-right corner of the LCD screen.
5. Connect the optional PC.
Micro USB Port
3
Loading...