Yamaha YSP-3000 Owner’s Manual

OWNER'S MANUAL

CAUTION

RISKOFELECTRICSHOCK

DONOTOPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided t_r your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been danmged in any way, such

as power supply cable or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been dropped.

i En

FCC INFORMATION (for US customers)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/or another

product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to t)llow instructions could void your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class "B" digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a

residential environment will not result in harnfful interference with other electronic devices.

This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmfid to the operation

of other electronic devices.

Compliance with FCC regulations does not guarantee that

interference will not occur in all installations. If this product is

found to be the source of interference, which can be determined by turning the unit "OFF" and "ON", please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe

Ave, Buena Park, CA 90620. The above statements apply ONLY to those products distributed

by Yamaha Corporation of America or its subsidiaries.

We Want You Listening For A Lifetime

Yamaha and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your S._,"_

equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying ,_, blaring or distortion - and, most importantly, without affecting your sensitive hearing. ,_)r_ _,

Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries

Association's Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels. L_ST_NllqG

ii En

1 To assure the finest performance, please read this manual

carefidly. Keep it in a sale place t)r future reference.

2 Install this sound system in a well ventilated, cool, dry, clean

place with at least 5 cm (2 in) of space above (or below) this unit

away from direct sunlight, heat sources, vibration, dust,

moisture, and/or cold.

3 Locate this unit away from other electrical appliances, motors, or

transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from cold

to hot, and do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may fall onto this

unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:

Other components, as they may cause damage and/or discoloration on the surface of this unit.

Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury. Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this

unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc.

in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections are

complete.

8 Do not operate this unit upside-down. It may overheat, possibly

causing damage.

9 Do not use t)rce on switches, knobs and/or cords. 10 When disconnecting the power supply cable from the wall outlet,

grasp the plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might damage

the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this unit

with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power supply cable

disconnected from a wall outlet or this unit during a lightning

stornl,

14 Do not attempt to modify or fix this unit. Contact qualified

Yamaha service personnel when any service is needed. The cabinet should never be opened t)r any reasons.

15 When not planning to use this unit for long periods of time (i.e.

vacation), disconnect the power supply cable from the wall outlet.

16 Be sure to read the "Troubleshooting" section on common

operating errors bet)re concluding that this unit is faulty.

17 Bet)re moving this unit, press STANDBY/ON to set this unit in

standby mode, and disconnect the power supply cable from the wall outlet.

18 Condensation will form when the surrounding temperature

changes suddenly. Disconnect the power supply cable t}om the outlet, then leave the unit alone.

19 When using the unit for a long time, the unit may become warm.

Turn the power oft', then leave the unit alone for cooling.

20 Install this unit near the AC outlet and where the AC power plug

can be reached easily.

21 The batteries shall not be exposed to excessive heat such as

sunshine, fire or the like.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

WARNING

THE POWER SUPPLY CABLE OF THIS UNIT MUST BE CONNECTED TO THE MAIN SOCKET OUTLET VIA A

PROTECTIVE EARTHING CONNECTION.

This unit is not disconnected from the AC power source as long as

it is connected to the AC wall outlet, even if this unit itself is

turned off by STANDBY/ON. This state is called the standby

mode. In this state, this unit is designed to consume a very small

quantity of power.

IMPORTANT

Please record the serial number of this unit in the space below. MODEL:

Serial No.:

The serial number is located on the rear of the unit. Retain this

Owner's Manual in a safe place t)r future reference.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot

and tully insert.

This Class B digital apparatus complies with Canadian ICES-003.

FOR U.K. CUSTOMERS

It"the socket outlets in the home are not suitable t)r the plug supplied with this appliance, it should be cut off and an

appropriate 3 pin plug fitted. For details, refer to the instructions

described below. Note that the plug severed from the mains lead

must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE: Blue: NEUTRAL

Brown: LIVE As the colonrs of the wires in the mains lead of this apparatus may

not correspond with the colonred markings identifying the terminals in your ping, proceed as t)llows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Make

sure that neither core is connected to the earth terminal of the three

pin plug.

CAUTION

Danger of explosion it"battery is incorrectly replaced. Replace only with the same or equivalent type.

CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposnre.

III En

Overxiew ................................................................. 2

Features .................................................................. 3

Using this manual .................................................. 5

Supplied accessories .............................................. 6

Controls and functions .......................................... 7

Front panel ................................................................ 7

Front panel display ................................................... 8

Rear panel ................................................................. 9

Remote control

(Europe, Australia, Asia, and Korea models) ..... 10

Remote control (U.S.A. and Canada models) ......... 13

Installation ............................................................ 16

Before installing this unit ........................................ 16

Installing this unit ................................................... 16

Connections .......................................................... 19

Before connecting components ............................... 20

Connections using HDM[ cables ............................ 21

Connecting a TV ..................................................... 22

Connecting a DVD playeffrecorder ........................ 23

Connecting a digital satellite tuner or a cable TV tuner

............................................................................. 24

Connecting a digital airwave tuner ......................... 25

Connecting a portable audio player ........................ 26

Connecting other external components .................. 27

Connecting a subwoofer ......................................... 28

Connecting the FM antenna .................................... 29

About the [R IN terminal

(U.S.A. and Canada models only) ...................... 29

Connecting the AC power supply cable ................. 29

Getting started ..................................................... 30

Installing batteries in the remote control ................ 30

Operation range of the remote control .................... 30

Turning on this unit or setting it to

the standby mode ................................................ 31

Using SET MENU ................................................ 32

Displaying the OSD (on-screen display) ................ 32

The flow chart of SET MENU ................................ 33

Changing OSD language ..................................... 34

AUTO SETUP (IntelliBeam) .............................. 35

The flow chart of AUTO SETUP ........................... 35

Installing the IntelliBeam microphone ................... 36

Using AUTO SETUP (IntelliBeam) ....................... 37

Using the system memory ................................... 42

Convenient usage of the system memory ............... 42

Saving settings ........................................................ 42

Loading settings ...................................................... 43

Manual tuning ......................................................... 49

Automatic preset tuning .......................................... 50

Manual preset tuning .............................................. 51

Selecting a preset station ........................................ 52

Displaying the Radio Data System information

(Europe model only) ........................................... 52

Enjoying surround sound .................................... 54

5 Beam .................................................................... 54

Stereo plus 3 Beam ................................................. 55

3 Beam .................................................................... 55

My Surround ........................................................... 55

Enjoying 2-channel sources in surround sound ...... 57

Enjoying TV in surround sound ............................. 58

Adjusting surround mode parameters ..................... 59

Enjoying stereo sound .......................................... 60

2-channel stereo playback ....................................... 60

5-channel stereo playback ....................................... 60

Playing back sound clearly (My Beam) .............. 61

Using auto-adjust ikmction ...................................... 61

Using manual-adjust ikmction ................................. 62

Using sound field programs ................................. 63

CINEMA DSP programs ........................................ 64

Using the music enhancer .................................... 66

Using the volume mode

(Night listening enhancer/TV volume equal mode)

Using the sleep timer ............................................ 68

Displaying the input source information ............ 70

Using the HDMI control feature ......................... 71

MANUAL SETUP ................................................ 72

Using MANUAL SETUP ....................................... 73

BEAM MENU ........................................................ 74

SOUND MENU ...................................................... 78

INPUT MENU ........................................................ 80

DISPLAY MENU ................................................... 83

Adjusting the audio balance ................................ 84

Using the test tone .................................................. 84

Using the audio output being played back .............. 85

Selecting the input mode ...................................... 87

Adjusting the system parameters ....................... 88

Using the system parameters .................................. 88

Setting the MEMORY PROTECT ......................... 89

Setting the MAX VOLUME ................................... 90

Setting the TURN ON VOLUME .......................... 90

Setting the DEMO MODE ..................................... 91

Setting the PANEL INPUT KEY ........................... 92

Disabling the front panel keys ................................ 93

Setting the FACTORY PRESET ............................ 94

Remote control features ....................................... 96

Setting remote control codes .................................. 96

Controlling other components ................................ 97

Using the TV macro ............................................. 100

Playback ............................................................... 45

Selecting the input source ....................................... 45

Playing back sources ............................................... 46

Adjusting the volume .............................................. 47

FM tuning ............................................................. 48

FM controls and functions ...................................... 48

Automatic tuning .................................................... 49

Troubleshooting .................................................. 102

Glossary ............................................................... 105

Index .................................................................... 107

Specifications ...................................................... 108

I List of remote control codes ........................................... i I

1En

It is generally accepted that in order to fully enjoy the benefits of surround sound at home, you must endure the agony of wiring and installing a great number of speakers in the hope that your listening room will give you the same kind of surround sound experience as your local movie theater. Yamaha YSP-3000 Digital Sound Projector challenges this preconception that complicated speaker setup and troublesome wiring go hand-in-hand with the enjoyment of multi-channel surround sound. This slimline unit does away with the need for complicated wiring and installation worries, leaving you with a unit that is not only easy to set up, but is also capable of reproducing the kind of powerful surround sound you have been waiting for from its built-in 2 woofers and 21 full-range small speakers. You can fine-tune the parameters of this unit to adjust the delay time for separate sound beams, resulting in highly directional sound that comes in on the listening position from all directions. The YSP-3000 projects sound beams containing surround sound information for the front right (R), front left (L), surround right (SR), and surround left (SL) speaker positions, which are reflected off the walls of your listening room before reaching the actual listening position. With the addition of center (C) sound beams, this Digital Sound Projector creates true-to-life 5.1 -channel surround sound that makes you feel as if there are actual speakers around the room. Sit back and enjoy the real sound experience of this simple, yet stylish Digital Sound Projector.

Imaginary

front right

2 En

Imaginary

front left

speaker

Imaginary

center --

speaker

Imaginary

surround right

speaker

Listening position

Imaginary

surround left

speaker

Digital Sound Projector TM

The Digital Sound Projector technology allows one slim unit to control and steer multiple channels of sound to generate multi-channel surround sound, thus eliminates the need for satellite loudspeakers and cabling normally associated with conventional surround sound systems. This unit also employs the beam modes that let you enjoy the surround sound (5 Beam, Stereo plus 3 Beam, 3 Beam, and My Surround), 2-channel and 5-channel stereo playback, and My Beam.

My Surround

In addition to the above mentioned beam modes, this unit is equipped with My Surround beam mode that allows you

to enjoy surround system even in a small listening area. My Surround is a function integrated and optimized with DiMAGIC's Euphony technology and Yamaha's Beam reproduction system.

My Beam

This unit employs My Beam that ensures a clear sound in a noisy environment. You can adjust the beam angle manually or automatically using the supplied remote

control to the maximum of 45 °, rightward and leftward.

Cinema DSP

This unit employs the Cinema DSP technology developed by Yamaha Electronics Corp. that lets you experience movies at home with all the original dramatic sound impact.

HDMI TM (High-Definition Multimedia Interface)

t HDM[ interface for standard, enhanced, or high-definition

video (including 1080p video signal transmission) as well as multi-channel digital audio based on HDCP

€' Simple and easy connections with HDM[ supported external

components

t Functional link with an HDM[ control-compatible TV

Versatile Remote Control The supplied remote control comes with preset remote

control codes used to control the DVD player, VCR, cable TV tuner, and digital satellite tuner connected to this unit. In addition, the remote control is equipped with the macro capability that enables a series of operations with the press of a single button.

AUTO SETUP (IntelliBeam)

This unit employs the automatic sound beam and acoustic optimization technology with the aid of the supplied IntelliBeam microphone. You can avoid troublesome listening-based speaker setup and achieve highly accurate sound beam adjustments that best match your listening

environment.

Compatibility with the Newest Technologies

This unit employs decoders compatible with Dolby Digital, DTS, Dolby Pro Logic, Dolby Pro Logic II, DTS

Neo:6, Music Enhancer, and Neural Surround. €' Dolby Digital

This is the standard audio signal format used on various digital media such as DVD, Blu-ray, and HD DVD. This

surround technology delivers high-quality digital audio for up to 5.1 discrete channels to produce a directional and more realistic effect.

€' DTS

This is the standard audio signal format used on various digital media such as DVD, Blu-ray, and HD DVD. This

surround technology delivers high-quality digital audio for up to 5.1 discrete channels to produce a directional and more realistic effect.

€' Dolby Pro Logic

This sophisticated, matrix decoding technology up-converts any 2-channel source audio to a 5.l-channel ikdl bandwidth

playback, resulting in a surround sound experience.

€' Dolby Pro Logic II

This is a redesigned version of Dolby Pro Logic that employs 2 stereo surround channels, a subwoofer, and a greatly

enhanced steering logic. This improved technology provides an exceptionally stable sound field that simulates 5.1 to a

much greater degree than the original Dolby Pro Logic.

€' DTS Neo:6

This technology decodes the conventional 2-channel sources for 6-channel playback, enabling playback with the fldl-range

channels with higher separation. Music mode and Cinema mode are available to play back music and movie sources

respectively.

€' Music Enhancer to restore the original depth and width of

compression artifacts such as the MP3 format.

€' Neural Surround decoder (U.S.A and Canada models only)

Sophisticated FM tuner

€' 40-station random and direct preset tuning €' Automatic preset tuning €' Radio Data System capability (Europe model only)

XMTM Satellite Radio (U.S.A. and Canada models only)

€' XM Satellite Radio tuning capability (using the XM Mini-

Tuner Dock, and Antenna sold separately by XM Satellite Radio)

€' Neural Surround decoder to play back the XM HD content of

XM Satellite Radio broadcasts in multi-channels, resulting in a ikdl surround sound experience

€' XM Satellite Radio information displaying capability

iPod TM Controlling Capability (U.S.A., Canada, and Australia models only)

€' DOCK terminal to connect a Yamaha iPod universal dock

(such as the YDS-10, sold separately), which supports iPod (Click and Wheel), iPod nano, and iPod mini

€' Playback information displaying capability €' Battery charging capability

3En

Inte\liBeam

The "lnte\liBeam " logo and "IntelliBeam" are trademarks of YAMAHA Corporation.

[ CINEMA _:_ _

The "_" logo and "Cinema DSP" are registered trademarks of YAMAHA Corporation.

Manufactured under license from 1 Ltd. Worldwide patents applied for.

The " " logo and "Digital Sound Projector '_''' are trademarks of 1 Ltd.

SR$(®)

DIGITAL

Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories.

DigitalSurround]Neo:6

"DTS" and "Yeo:6" are registered trademarks of DTS, Inc.

H_::Dm|

"HDMI", the "HDMI" logo and "High-Definition Multimedia Interface" are trademarks or registered trademarks of HDMI Licensing LLC.

TruBass, SRS and the "(O) " symbol are registered trademarks of SRS Labs, Inc. TruBass technology is incorporated under

license fi'om SRS Labs, Inc.

/I_ EUPHONY

,_ EUPHONY IMis a trademark of DiMAGIC Co., Ltd.

4 En

• This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the supplied owner's manual for each component.

• Operations ill this manual use keys on the supplied remote control of this unit unless otherwise specified.

• -"4?- indicates a tip for your operation.

• This manual is printed prior to production. Designs and specifications are subject to change in part as a result of improvements, etc. [n

case of differences between the manual and the product, the product has priority.

1 Install this unit in your listening room.

See "Installation" on page 16.

2 Connect this unit to your TV and other external components.

See "Connections" on page 19.

Prepare the remote control and turn on the power of this unit.

See "Getting started" on page 30.

Run AUTO SETUP.

See "AUTO SETUP (IntelliBeam)" on page 35.

5 Play backa source.

See "Playback" on page 45.

Change the beam modes and/or CINEMA DSP settings.

See "Enjoying surround sound" on page 54.

If you want to make additional settings and adjustments

Run MANUAL SETUP to fine-tune settings and/or set remote control codes.

See "MANUAL SETUP" on page 72 and "Remote control features" on page 96.

SEn

Check that you have received all of the following parts.

Remote control (×1)

STANDBWON POWERPOWER

DOCK

mpUTIWUACnO

_QQQ

AUtO

VOL_ODESETUPIN_O_ SLEEP

SBEAM ST*a_EAr_ a_EAM

MUSIC MOVEE SPORts

E_HANCER E_ MEnU

OWO-

VOLUME CH TVVOL

MUTE TVINPUT TV MUTE

CHLEVEL TEST

(U.S.A. and Canada models)

CODESET

_YAMAHA

Fasteners (x4)

Cable clamp (×1)

IntelliBeam microphone

(×1)

Cardboard microphone

stand (×1)

Optical cable (xl)

Digital audio pin cable (×1)

(Orange)

Audio pin cable (×1)

(White/Red)

REFERENCE GUIDE (iPod/XM Radio) (×1)

YSP-3000

SEn

Batteries (x2)

(AA, R6, UM-3)

Demonstration DVD

(xl)

Indoor FM antenna (×1)

OSD* video pin cable (×1)

(Yellow)

*OSD: On-Screen Display

(U.S.A., Canada, and Australia

models only)

QUICK REFERENCE

GUIDE

'_The nmnber of provided languages

varies depending on the sales area.

L 1iNPUT VOLUME + STANDBY/ON

AUX 3 INTELLIBEAM MIC

@ AUX 3 input jack

Connect your portable audio player (see page 26).

@ INTELLIBEAM MIC jack

Connect the supplied IntelliBeam microphone for AUTO SETUP (see page 36).

@ Remote control sensor

Receives infrared signals from the remote control.

@ Front panel display

Shows information about the operational status of this unit.

@ INPUT

Press repeatedly to switch between input sources (see page 45). Outputs a test tone to experience the sound beam (see page 91 ).

@ VOLUME+/-

Controlsthe volume level of all audio channels (see

page 47). @ STANDBY/ON

Turns on the power of this unit or sets it to the standby mode (see page 31 ).

• When you turn on this unit, you will hear a click sound followed by the 4 to 5-second interval before sound reproducing.

• [n the standby mode, this unit consumes a small amount of power in order to receive infi'ared signals fi'om the remote control or to search for HDM[ signals.

7 En

@ HDMI indicator

Lights up when the signal of the selected input source is input at the HDMI IN jack(s).

@ TUNER indicators

FM: Light up when this unit is receiving an FM broadcast. XM: MEMORY flashes during the XM preset operation

(U.S.A. and Canada models only). @ CINEMA DSP indicator

Lights up when a sound field program is selected (see page 64).

@ PCM indicator Lights up when this unit is reproducing PCM (Pulse Code

Modulation) digital audio signals.

@ Decoder indicators

Light up when the corresponding decoder operates (see page 56).

The neural decoder is available for the U,S,A, and Canada models

only.

@ ENHANCER indicator

Lights up when the Music Enhancer is selected (see page 66).

@ Volume level indicator

Displays the current volume level.

@ DOCK indicator

(U.S.A., Canada, and Australia models only)

Lights up when your iPod (Click and Wheel), iPod nano, or iPod mini is connected to this unit via the DOCK

terminal on this unit.

@ NIGHT indicator

Lights up when one of the night listening enhancers is selected (see page 67).

@ SLEEP indicator

Lights up when the sleep timer is set (see page 68).

@ Radio Data System indicators

(Europe model only)

Show the current Radio Data System status. @ XM indicator

(U.S.A. and Canada models only)

Lights up when XM is selected as the input source. @ Multi-information display

Shows information with alphanumeric characters when you adjust the parameters of this unit.

@ Input channel indicators

Show information when you adjust the parameters of this unit. The channel component of the current digital input

signal is displayed (see page 56).

@@@ @ @

UEN

You can adjust the brightness and display setting of the fi'ont panel display using the F,DISPLAY SET parameter in MANUAL

SETUP (see page 83),

@ SRS TruBass indicator Lights up when TruBass is turned on (see page 79).

@ EQUAL indicator

Lights up when the TV volume equal mode is selected (see page 67).

SEn

The illustration below shows the rear panel of the U.S.A. and Canada models.

"1_'l_t-'Itlll'|l'lll'lff'llt

- AUDIO INPUT

__ANTENNA 1

,%UXI V/STB

OUT=

!IDEO

JBWOOFER

m DIGITAL INPUT 7

AUX 2 DVD]

AUX 1 TV/STII]l___

42)

ANTENNA jack

Connect the FM antenna (see page 29).

DOCK terminal (U.S.A., Canada, and Australia models only)

Connect the Yamaha iPod universal dock (such as YDS-

10, sold separately) (see page 2 in the Reference Guide).

AUX 1 AUDIO INPUT jacks

Connect an external component via an analog connection (see page 23).

TV/STB AUDIO INPUT jacks

Connect your TV, digital satellite tuner, or cable TV tuner via an analog connection (see pages 22 and 24).

VIDEO OUT jack

Connect to the video input jack of your TV to display the OSD of this unit (see page 22).

SUBWOOFER OUT jack

Connect your subwoofer (see page 28).

AUX 2 COAXIAL DIGITAL INPUT jack

Connect an external component via a coaxial digital connection (see page 27).

AUX 1 OPTICAL DIGITAL INPUT jack

Connect an external component via an optical digital connection (see page 27).

TV/STB OPTICAL DIGITAL INPUT jack

Connect your TV, digital satellite tuner, or cable TV tuner via an optical digital connection (see pages 22 and 24).

(U.S.A. and Canada models)

DVD COAXIAL DIGITAL INPUT jack

Connect your DVD player via a coaxial digital connection (see page 23).

XM antenna jack (U.S.A and Canada models only)

Connect your XM Mini-Tuner Dock (sold separately) (see page 5 in the Reference Guide).

IR INterminal

(U.S.A and Canada models only)

This is a control expansion terminal for commercialuse only (see page 29).

AUX 1 HDMI IN jack

Connect your digital satellite tuner, cable TV tuner, digital air wave tuner, or game console via an HDMI connection (see page 21).

DVD HDMI IN jack

Connect your DVD player via an HDMI connection (see page 21).

HDMI OUT jack

Connect to the HDMI IN jack on your HDMI component such as a TV or a projector connected to this unit (see page 21 ).

AC power supply cable

Connect to the AC wall outlet (see page 29).

9 En

This section describes the functions of the remote control used to control this unit. Some buttons marked with an

asterisk (*) share the common functions between the YSP and TV/AV operation modes (@).

_%,_

Youcan also controlother componentsusing the remote control once you set the appropriate remote control codes. See "Controlling other components" on page 97 for details.

Infrared window

Outputs infrared control signals. Aim this window at the component you want to operate.

@ STANDBY/ON

Sets this system to the standby mode (see page 31 ).

@ Transmission indicator

Lights up when infrared control signals are being output.

@ Input selector buttons

Use to select an input source (DVD, AUK l+AUK2+ AUX3, STB, TV, or FM).

@ VOk MODE

Turns on or off the volume modes (see page 67).

@ AUTO SETUP

Enters the AUTO SETUP menu (see page 35).

CINEMA DSP program buttons

Select the CINEMA DSP programs (see page 63).

@ ENHANCER

Turns on or off the Music Enhancer (see page 66).

Cursor buttons A / _ / _ / _, ENTER

Select and adjust SET MENU items.

DISPLAY

Displays information on the selected input signal. @ VOLUME +/-

Increasesor decreases the volume level of this unit (see

page 47).

MUTE

Mutes the sound. Press again to restore the audio output to the previous volume level (see page 47).

@ TV INPUT

Toggles between the input sources on the TV (see page 97).

@ CH LEVEL

Adjusts the volume level of each channel (see page 85).

TEST

Outputs atest tone when adjusting the output level of each channel (see page 84).

10 En

@ DVD playerNCR control buttons Control your DVD player or VCR (see pages 98 and 99).

@ My Beam microphone

Collects the test tones from this unit when using the My Beam auto-adjust function (see page 61).

@ TV POWER

Turns on the power of your TV or sets it to the standby mode (see page 97).

AV POWER

Turns on the power of the selected component or sets it to the standby mode (see pages 98 and 99).

@ INPUT1

Switches the input source on your TV (see page 97).

@ MACRO

Use to set the TV macro (see page 100).

@ WA

Switches the preset station number (1 to 8) when this unit is receiving an FM broadcast (see page 52).

A-E

Switches the preset statkm group (A to E) when this unit is receiving an FM broadcast (see page 52).

@ SLEEP

Sets the sleep timer (see page 68).

@ INPUTMODE

Toggles between input modes (AUTO, DTS, and ANALOG) (see page 87).

Beam mode buttons

Change the beam mode settings (see pages 54, 60, and

61).

@ SUR. DECODE

Selects the surround mode for playback (see page 57).

@ MENU

Displays the setup menu on your TV monitor (see

pages 37 and 73).

@ Operation mode selector

Selects the operation mode of this unit. Select YSP when operating this unit and select TV/AV when operating your

TV or other AV components.

-"i'_'l_l-'It III' |I 'If I"I(lql I"

RETURN

Selects sleep timer settings or returns to the previous SET MENU screen,

TV VOL +/-

Adjusts the volume level of your TV (see page 97).

CH +/-

Changesthe channels of your TV, digital satellite tuner, cable TV tuner, or VCR (see pages 97 and 99).

TV MUTE, CODE SET

Mutes the audio output of your TV (see page 97).

Sets up remote control codes (see page 96).

The flmctions @ and @ are available only when the FM stations are preset.

11 En

This section describes the functions of the remote control used to control FM, Radio Data System, or iPod when the

TV/AV mode is selected with the operation mode selector (@). Note that the Radio Data System controls are available for Europe model only, and the iPod controls are available for Australia model only.

423-----

432---

443_

PRESET/TUNE

FM: Switches between the preset search mode and the frequency search mode (see pages 49 to 52).

@ Numeric buttons

FM: Enter numbers.

Cursor buttons _ / _ / <I/ _, ENTER

FM: Use ENTRY # (_/_") to change the preset station number (1 to 8) or frequency level (see pages 49 to 52). Use A-E 4_,(<_/D) to change the preset station group (A to E) (see pages 51 and 52). Use ENTER toconfirm the input

above.

These functions arealso available when this unit is receivingthe Radio Data System (see page 52)or playing back your iPod (see page 3 ill the Reference Guide).

DISPLAY

Radio Data System and iPod: Displays information when this unit is receiving the Radio Data System (see page 52) or playing back your iPod (see page 3 in the Reference Guide).

MEMORY

FM: Stores the preset stations (see pages 50 and 51 ).

-4'--

This function isalso available when this unit is receiving the Radio Data System (see page 52).

FM: Switches between automatic and manual tuning (see page 49).

Operation mode selector

Selects the operation mode of this unit. Select YSP when operating this unit and select TV/AV when operating your

TV or other AV components.

12 En

-"i'_'J[i_t-'It II|' |I 'IfI"I( I'll I"

This section describes the functions of the remote control used to control this unit. Some buttons marked with an

asterisk (*) share the common functions between the YSP and TV/AV operation modes (@).

Youcan also controlother componentsusing the remote control once you set theappropriate remote control codes. See "Controlling other components" on page 97 for details.

L_ 49

SUR.D_COD_;

Infrared window

Outputs infrared control signals. Aim this window at the component you want to operate.

@ STANDBY/ON

Sets this system to the standby mode (see page 31 ).

@ Transmission indicator

Lights up when infrared control signals are being output.

@ Input selector buttons

Use to select an input source (DVD, AUXI, AUX2, AUX31DOCK, STB, TV, or FM/XM).

@ VOk MODE

Turns on or off the volume modes (see page 67).

@ AUTO SETUP

Enters the AUTO SETUP menu (see page 35).

Sound field program buttons

Select the sound field programs (see page 63).

@ ENHANCER

Turns on or off the Music Enhancer (see page 66).

Cursor buttons A / _ / _ / _, ENTER

Select and adjust SET MENU items.

DISPLAY

Displays information on the selected input signal.

@ VOLUME +/- Increasesor decreases the volume level of this unit (see

page 47).

MUTE

Mutes the sound. Press again to restore the audio output to the previous volume level (see page 47).

@ TV INPUT

Toggles between the input source on your TV (see page 97).

@ CH LEVEL

Adjusts the volume level of each channel (see page 85).

TEST

Outputs a test tone when adjusting the output level of each channel (see page 84).

13 En

@ DVD playerNCR control buttons Control your DVD player or VCR (see pages 98 and 99).

@ My Beam microphone

Collects the test tones from this unit when using the My Beam auto-adjust function (see page 61).

@ TV POWER

Turns on the power of your TV or sets it to the standby mode (see page 97).

AV POWER

Turns on the power of the selected component or sets it to the standby mode (see pages 98 and 99).

@ INPUT1

Switches the input source on your TV (see page 97).

@ MACRO

Use to set the TV macro (see page 100).

@ WA

Switches the preset station number (1 to 8) when this unit is receiving an FM broadcast or XM channel (see page 52).

CAT

Switches the preset station group (A to E) when this unit is receiving an FM broadcast or XM channel (see page 52).

@ SLEEP

Sets the sleep timer (see page 68).

@ INPUTMODE

Toggles between input modes (AUTO, DTS, and ANALOG) (see page 87).

Beam mode buttons

Change the beam mode settings (see pages 54, 60, and

61).

@ SUR. DECODE

Selects the surround mode for playback (see page 57).

Displays the setup menu on your TV monitor (see

pages 37 and 73).

@ Operation mode selector

Selects the operation mode of this unit. Select YSP when operating this unit and select TV/AV when operating your

TV or other AV components.

RETURN

Selects sleep timer settings or returns to the previous SET MENU screen,

TV VOL +/-

Adjusts the volume level of your TV (see page 97). @ CH +/-

Changesthe channels of your TV, digital satellite tuner, cable TV tuner, or VCR (see pages 97 and 99).

@ TV MUTE, CODE SET

Mutes the audio output of your TV (see page 97).

Sets up remote control codes (see page 96).

The functions @ and @ are available only when the FM/XM stations are preset.

14 En

This section describes the functions of the remote control used to control FM, XM Satellite Radio, or iPod when the

TV/AV mode is selected with the operation mode selector

(_).

(23_

-"i'_'J_t-'It II|' |I 'If I"Iif'If I"

PRESET/TUNE

FM: Switches between the preset search mode and the frequency search mode (see pages 49 to 52).

@ Numeric buttons

FM, XM: Enter numbers.

Cursor buttons _ / _ / <1/ _, ENTER

FM: Use ENTRY # (_/_") to change the preset station number (1 to 8) or frequency level (see pages 49 to 52). Use CAT/A-E _ (<_/_>)to change the preset station group (A to E) (see pages 51 and 52). Use ENTER to confirm the input above. XM: Use ENTRY # (_/_) to select XM channels in All Channel Search mode/Category Search mode, and to select the preset channel number (1 to 8) in Preset Search mode. Use CAT/A-E 4_ (<]/D) to select XM categories in All Channel Search mode/Category Search mode, and to select the preset channel group (A to E) in Preset Search mode. Use ENTER to confirm the input above (see pages 7 and 8 in the Reference Guide).

These ikmctionsare also available when this unitis playing back your iPod (see page 3 illthe ReferenceGuide).

DISPLAY

XM and iPod: Displays information when this unit is receiving an XM channel (see page 10 in the Reference Guide) or playing back your iPod (see page 3 in the Reference Guide).

MEMORY

FM: Stores the preset stations (see pages 50 and 51). XM: Use to store the preset stations (see page 9 in the

Reference Guide).

FM: Switches between automatic and manual tuning (see page 49). XM: Switches between search modes (All Channel

Search, Category Search, and Preset Search) (see pages 7 and 8 in the Reference Guide).

Operation mode selector

Selects the operation mode of this unit. Select YSP when operating this unit and select TV/AV when operating your TV or other AV components.

15 En

This section describes a suitable installation location to install this unit using a metal wall bracket, a rack or a stand. Depending on your installation environment, connections with external components can be done before installing this unit. We recommend that you temporarily place and arrange all components, including this unit, in order to decide which procedure should come first. Especially when you make a connection over HDMI, we recommend that you make a connection first before installation (see page 21).

ill

This unit creates surround sound by reflecting projected sound beams off the walls of your listening room. The surround sound effects produced by this unit may not be sufficient when this unit is installed in the following

locations.

• Rooms with walls inadequate for reflecting sound beams

• Rooms with acoustically absorbent walls

• Rooms with measurements outside the following

range: W (3 to 7 m (10 to 23 ft)) x H (2 to 3.5 m (7 to

11.5 ft)) x D (3 to 7 m (10 to 23 ft))

• Rooms with less than 1.8 m (6 ft) from the listening

position to this unit

• Rooms where objects such as furniture are likely to

obstruct the path of sound beams

• Rooms where the listening position is close to the walls

• Rooms where the listening position is not in front of

this unit

• Youcan enjoy surround sound by selecting My Surround(see

page 55) as thebeam )nodeeven if your listening room may not fulfill theabove conditions (except when the listening position is not directly facing toward the front ofthis unit).

• Youcan alsoenjoy surround sound by selecting 2-channel or 5-

channel stereo playback (see page 60) or My Beam (see page 61) as thebeam )nodeeven if your listening room )nay not

fulfill theabove conditions.

Make sure you leave an adequate amount of ventilation space so that heat can escape. Make at least 5 cm (2 in) of space above or below this unit.

Side view

• We do not recommend putting this unit directly on the floor of your listening room. Please install this unit using a metal wall

bracket, a rack, or a stand.

• This unit weighs 11.5 kg (25 lbs 6 oz). Be sure to install this unit where it will not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.

• When using a cathode-ray robe (CRT) TV, do not install this unit directly above your TV.

• This unit is shielded against magnetic rays. However, if the picture on your TV screen becomes blurred or distorted, we recommend moving this unit away from your TV.

Install this unit where there are no obstacles such as furniture obstructing the path of sound beams. Otherwise,

the desired surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the

corner.

Parallel installation

Install this unit in the exact center of the wall when it is measured from the left and right corners.

An object, such as furniture

16 En

I 5cm(2in)ormore

Front Rear

Corner installation

Install this unit in the corner at a 40° to 50° angle from the adjacent walls.

40 ° to 50 °

An object, such as furniture

• Installation examples Example 1

Install this unit as close to the exact center of the wall as possible.

Example 2

Install this unit so that the sound beams can be reflected off the walls.

{ }

Example 3

Install this unit as close to the exact front of your normal listening position as possible.

17 En

|/iFi_/_'lfl.li

• Using a metal wall bracket

You can use the optional metal wall bracket to mount this unit on the wall in your listening room.

Metal wall bracket

This unit

YSP-3000

SPM-K30 (Option) (mm)

-_,._

Refer to tile instructions supplied with tile metal bracket for details on how to attach the metal bracket to the wall or how to

attach this unit to the metal bracket.

• Using astand

You can mount your TV on a stand placed on a commercially available rack and install this unit under your TV.

Stand

• Using a rack

You can install this unit either above or under your TV in a commercially available rack.

When this unit is installed above your TV

When this unit is installed under your TV

Make sure that the rack is large enough to allow adequate ventilation space around this unit (see page 16) and that it is strong enough to support the weight of both this unit and your TV.

• Affixing this unit

Peel off the film from each of the four supplied fasteners and then secure them to the bottom four corners of this

unit and the top of the rack, etc.

This unit

,n! i:¸!¸¸i¸(2¸¸i

This unit

Refer to the instructions supplied with the stand for details oil

how to install tile stand or how to ltlOl.lnt and tile TV Oil tile stand.

18 En

Fasteners

• Do not install this unit oil top of a slanted surface. This unit may fall over and cause injury.

• Make sure you wipe the surface of the rack, etc. before securing the fasteners. Applying the tape to a dirty or wet surface will weaken the sticking power of the tape, and this unit )nay fall as

a result.

This unit is equipped with the following types of audio/video input/output jacks/terminal:

For audio input

• 2 optical digital input jacks

• 2 coaxial digital input jacks

• 2 sets of analog input jacks

• 1 universal dock terminal (U.S.A., Canada, and Australia models only)

For audio/video input

For audio output

• l subwoofer output jack

For audio/video output

• 1 HDMI output jack

For video output

• 1 analog output jack

• 2 HDMI input jacks

Use these jacks/terminal to connect external components such as your TV, DVD player, VCR, digital satellite tuner, cable TV tuner, digital air wave tuner, portable audio player, game console, and iPod. Further, by connecting a subwoofer to this unit, you can enjoy reinforced low-bass sounds. For details on how to connect various types of external components to this unit, see pages 21 to 28.

[__'l#JifelA't

• Do not connect this unit or other components to the mains power until all connections between components are complete.

• Unplug the AC power supply cable before changing connections, moving or cleaning this unit.

Audio connection

......................................................................................................................Video connection

This unit

i_i_i_i_i_ ii _i i_ _iii_ii_i_i_ii

I _ _ D 1_7_7_7_7_7_7_7_7_7_7_7_7_7i7i7i7i7i7i7i7i7i7i7i7i_1 I

DVD player Subwoofer portable audio Digital satellite tuner

player or cable TV tuner

VCR or game console

19 En

|PI,IIIII:I,'I(I,III _

• Cables used for connections

O HDMIcable

Audio pin cable (supplied)

(Red) (Red)

Optical cable (supplied)

Digital audio pin cable (supplied)

(Orange) (Orange)

3.5 mm stereo mini plug cable

Subwoofer pin cable

• Affixing cables

To prevent cables from becoming unplugged, place the supplied cable clamp with the open side facing upward, attach it to the rear panel of this unit in a suitable position, and then affix cables in the cable clamp.

__ Optical cable

F Attach to this unit

• Information on HDMI TM

Audio Signals

DVD video Dolby Digital, DTS, PCM

DVD audio

Blu-ray Disc

HD DVD Dolby Digital, DTS, PCM

• When CPPM copy-protected DVD audio is played back, video and audio signals may not be output depending on the type of DVD player.

• This unit is not compatible with HDCP-incompatible HDM[ or DVI components.

2-channel stereo

(up to 96 kHz/24 bit)

--'4'--

• We recommend that you use an HDM[ cable shorter than 5 m (16 ft) with the HDM[ logo printed on it.

• Use a conversion cable (HDM[jack _ DVI-D jack) to connect this unit to other DVI components.

O OSD video pin cable (supplied)

(Yellow) (Yellow)

• Notes on connecting the optical cable

• Pull out the cap before connecting the optical cable.

When you are not using the optical cable, be sure to put the cap back in place.

• When inserting the cable into the optical digital jack, make sure the direction is correct.

Cap

20 en

• Priority order for audio input signals

When multiple types of audio signals are simultaneously being input from a single source component, this unit plays back the audio signals in the following priority order: HDMI --+Digital --+Analog As default settings, the following input jacks are assigned to the corresponding input sources:

TV/STB t/ t/

DVD i/ _/ AUX 1 _/ t/ _/ AUX 2 _/ AUX 3 t,/

"1'lllll:i"l(l'lll"

This unit is equipped with 2 HDMI input jacks and 1 HDMI output jack. If your TV and other components have HDMI

jacks, use HDMI cables for simpler and easier connections, and you can skip the connection procedures from page 22 to

25. If your TV has a built-in digital satellite tuner and an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB OPTICAL DIGITAL INPUT jack on this unit.

• Even if you connect your TV and this unit via the HDM[ jack, you need to connect the video input jack on your TV to the VIDEO OUT jack on this unit in order to display the OSD of this unit.

• When HDM[ CONTROL is set to OFF (see page 82) and this unit is in the standby mode, the signals input at the HDM[ IN jacks are

not output at the HDM[ OUT jack.

_.,_,._

We recommend that you secure the HDM[ cable(s) with adhesive tape, etc. once you have connected the HDM[ cable(s) to the HDM[

jack(s) of this unit.

Rear panel of this unit

OUT7

IDEO I

DIGITAL INPUT =I

UX 2 DVD|

COAXIAL_I

AUX1

oPT,OALI

Video digital HDMI

input input

HDMI cable

I I

Optical

L,TrL=It'_'AV_L=_I'_

O O

DVD player/recorder

O OSD video pin cable

This connection (except for a game console) is not necessary if your TV has a built=in digital satellite tuner, cable TV tuner, or digital

airwave tuner.

Digital satellite tuner,

cable TV tuner,

digital airwave tuner,

or game console

Optical cable

21 En

|PI,IIIII_'I(I,III _

For audio connection, connect the analog audio output jacks on your TV to the TV/STB AUDIO INPUT jacks on this unit. If your TV has an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB OPTICAL DIGITAL INPUT jack on this unit. For video connection, connect the video input jack on your TV to the VIDEO OUT jack on this unit to display the OSD for easy viewing when you adjust the system parameters in SET MENU.

To prevent the optical cable from being unplugged, affix the optical cable ill the supplied cable clamp (see page 20).

• If you make analog and optical digital audio connections at the same time as shown in the illustration below, the digital audio signals input at the TV/STB OPTICAL DIGITAL INPUT jack take priority over the analog audio signals input at the TV/STB AUDIO INPUT jacks.

• Even if you connect your TV and this unit via the HDM[jack, you need to connect the video input jack on your TV to the VIDEO OUT jack on this unit in order to display the OSD of this unit.

Rear panel of this unit

(U.S.A. and Canada models'

ANTENNA =1r' AUDIO INPUT "-i"=OUT"=I

0 I

DOCK |AUX! ITV/STBI!!!W!O!!!I

I I

.®,®

Analog Video

audio input

output

DIGITAL INPUT7

UX 2 DVD|

COAXIAL®/ OPTICA[_ I

I ox,

h--

Optical

digital output

[] ®

XM IR IN

0SD video pin cable Audio pin cable

Optical cable

22 En

"I'lllll:i"l(l'lll"

Connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL DIGITAL INPUT jack on this unit. When you connect this unit to your DVD/VCR combo playeffrecorder, connect the analog audio output jacks on your DVD/VCR combo player/recorder to the AUX 1 AUDIO INPUT jacks on this unit in addition to the coaxial digital

audio connection.

To prevent the optical cable from being unplugged, affix the optical cable ill the supplied cable clamp (see page 20).

• Check that your DVD playeffrecorder is properly set to output Dolby Digital and DTS digital audio signals, ff not, adjust the system settings of your DVD playeffrecorder. For details, refer to the operation manual supplied with your DVD playeffrecorder.

• If your DVD player/recorder does not have a coaxial digital output jack, make all optical digital audio connection instead (see

page 27).

Rear panel of this unit

(U.S.A. and Canada models)

,,_ANTE NNA ]

DOCK

= AUDmO mNPUT T" OUT,=,_

Aux1 ITV!STB!S!!W!!!N

player/ ....... "der

collnectioll

L For lhe DVD/VCR combo

I I

.®,®

Analog

audio

output

m DIGITAL INPUT =

AUX 2 DVD

® COAXIAL@"_

_ OPTICAL_

AUX 1 TV/STB

Video signal to the TV

Audio pin cable

Digital audio pin cable

DVD player/recorder

23 En

|_'l,lllll_,'l(l,lll _

Connect the optical digital output jack on your digital satellite tuner or cable TV tuner to the TV/STB OPTICAL DIGITAL INPUT jack on this unit. Connect the analog audio output jacks on your digital satellite tuner or cable TV tuner to the TV/STB AUDIO INPUT jacks on this unit.

-"4"- Toprevent the optical cable fi'om being unplugged, affix the optical cable ill the supplied cable clamp (see page 20),

Rear panel of this unit

(U.S.A. and Canada models)

ANTENNA AUDIO INPUT

DOCK I AUX1 ITV/STB

- OUT1

!UBWOOFERI

DIGITAL iNPUT =I

UX 2 DVD|

COAXIAL_/ OPTICAL_ I

Analog

output

Video signal to the TV

Tiffs connectioi1 (except f_r a game console) is not

necessary if your TV has a built-in digital satellite

tuner, cable TV tuner, or digital airwave tuner.

Audio pin cable

Optical cable

audio

Digital satellite tuner

or cable TV tuner

Optical

digital

output

24 En

"1'lllll:i"l(l'lll"

Connect the TV/STB AUDIO INPUT jacks on this unit to the analog audio output jacks on your TV. Connect the optical digital output jack on your digital airwave tuner to the TV/STB OPTICAL DIGITAL INPUT jack on this unit in addition to the analog audio connection. By doing so, you can enjoy both analog and digital broadcasts.

_%,._

To prevent the optical cable fi'om being unplugged, affix the optical cable ill the supplied cable clamp (see page 20).

Rear panel of this unit

(U.S.A. and Canada models)

__ r AUDIO INPUT,

Connect to the analog audio output jacks on the TV.

rOUT1 m DIGITAL iNPUT =I

AUX 2 DVD|

® c0,x,AL®|

O ®

XM IB IN

AU_X10PTICAkT__

* This connection (except 12_ra game console) is not

Audio pin cable Optical cable

Video signal to the TV

necessary il your TV has a built-in digital satellile tuner, cable TV luner, or digital airwave luner.

Digital airwave tuner

25 En

iPI,IIIII:I"I(I,IIF

Connect the analog audio output jack on your portable audio player to the AUX 3 input jack on the front panel of this unit.

Front panel of this unit

3.5 mm stereo mini plug cable

Portable audio player

26 E_

+ 104 hidden pages