Yamaha SHS-500 User Manual
Owner’s Manual
Before using the instrument,
be sure to read “PRECAUTIONS” on pages 5–7.
EN
For SHS-500
SPECIAL MESSAGE SECTION
This product utilizes batteries or an external power supply
(adapter). DO NOT connect this product to any power supply or
adapter other than one described in the manual, on the name
plate, or specifically recommended by Yamaha.
WARNING: Do not place this product in a position where any-
one could walk on, trip over, or roll anything over power or connecting cords of any kind. The use of an extension cord is not
recommended! If you must use an extension cord, the minimum
wire size for a 25’ cord (or less) is 18 AWG. NOTE: The smaller
the AWG number, the larger the current handling capacity. For
longer extension cords, consult a local electrician.
This product should be used only with the components supplied
or; a cart, rack, or stand that is recommended by Yamaha. If a
cart, etc., is used, please observe all safety markings and instructions that accompany the accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be correct
at the time of printing. However, Yamaha reserves the right to
change or modify any of the specifications without notice or obligation to update existing units.
This product, either alone or in combination with an amplifier and
headphones or speaker/s, may be capable of producing sound
levels that could cause permanent hearing loss. DO NOT operate
for long periods of time at a high volume level or at a level that is
uncomfortable. If you experience any hearing loss or ringing in
the ears, you should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period
before damage occurs.
Some Yamaha products may have benches and / or accessory
mounting fixtures that are either supplied with the product or as
optional accessories. Some of these items are designed to be
dealer assembled or installed. Please make sure that benches
are stable and any optional fixtures (where applicable) are well
secured BEFORE using.
Benches supplied by Yamaha are designed for seating only. No
other uses are recommended.
NOTICE:
Service charges incurred due to a lack of knowledge relating to
how a function or effect works (when the unit is operating as
designed) are not covered by the manufacturer’s warranty, and
are therefore the owners responsibility. Please study this manual
carefully and consult your dealer before requesting service.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are both user safe and
environmentally friendly. We sincerely believe that our products
and the production methods used to produce them, meet these
goals. In keeping with both the letter and the spirit of the law, w e
want you to be aware of the following:
92-BP (bottom)
PLEASE KEEP THIS MANUAL
Battery Notice:
This product MAY contain a small non-rechargeable battery
which (if applicable) is soldered in place. The average life span of
this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement.
This product may also use “household” type batteries. Some of
these may be rechargeable. Make sure that the battery being
charged is a rechargeable type and that the charger is intended
for the battery being charged.
When installing batteries, never mix old batteries with new ones,
and never mix different types of batteries. Batteries MUST be
installed correctly. Mismatches or incorrect installation may result
in overheating and battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep all
batteries away from children. Dispose of used batteries promptly
and as regulated by the laws in your area. Note: Check with any
retailer of household type batteries in your area for battery disposal information.
Disposal Notice:
Should this product become damaged beyond repair, or for some
reason its useful life is considered to be at an end, please
observe all local, state, and federal regulations that relate to the
disposal of products that contain lead, batteries, plastics, etc. If
your dealer is unable to assist you, please contact Yamaha
directly.
NAME PLATE LOCATION:
The name plate is located on the bottom of the product. The
model number, serial number, power requirements, etc., are
located on this plate. You should record the model number, serial
number, and the date of purchase in the spaces provided below
and retain this manual as a permanent record of your purchase.
Model
Serial No.
Purchase Date
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620
Telephone : 714-522-9011
Type of Equipment : Digital Keyboard
Model Name : SHS-500
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference that may cause undesired operation.
See user manual instructions if interference to radio reception is suspected.
* This applies only to products distributed by Yamaha Corporation of America.
2 SHS-500 Owner’s Manual
(FCC DoC)
For AC adaptor and SHS-500
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your
authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories
and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all
installation instructions. Failure to follow instructions could
void your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15 for
Class “B” digital devices. Compliance with these requirements
provides a reasonable level of assurance that your use of this
product in a residential environment will not result in harmful
interference with other electronic devices. This equipment
generates/uses radio frequencies and, if not installed and
used according to the instructions found in the users manual,
may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not
* This applies only to products distributed by Yamaha Corporation of America. (class B)
guarantee that interference will not occur in all installations. If
this product is found to be the source of interference, which
can be determined by turning the unit “OFF” and “ON”, please
try to eliminate the problem by using one of the following measures:
Rel ocate eithe r this pr oduct or the device t hat is being affec ted
by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to distribute
this type of product. If you can not locate the appropriate
retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park,
CA90620
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
SHS-500 Owner’s Manual 3
For AC adaptor
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer’s
instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9 Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart,
stand, tripod, bracket, or
table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid
injury from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
4 SHS-500 Owner’s Manual
(UL60065_03)
PRECAUTIONS
For AC adaptor
For the instrument
PLEASE READ CAREFULLY
BEFORE PROCEEDING
Please keep this manual in a safe and
handy place for future reference.
WARNING
• This AC adaptor is designed for use with only
Yamaha electronic instruments. Do not use for
any other purpose.
• Indoor use only. Do not use in any wet
environments.
CAUTION
• When setting up, make sure that the AC outlet
is easily accessible. If some trouble or
malfunction occurs, immediately turn off the
power switch of the instrument and disconnect
the AC adaptor from the outlet. When the AC
adaptor is connected to the AC outlet, keep in
mind that electricity is flowing at the minimum
level, even if the power switch is turned off.
When you are not using the instrument for a
long time, make sure to unplug the power cord
from the wall AC outlet.
Power supply/AC adaptor
• Do not place the power cord near heat
sources such as heaters or radiators. Also, do
not excessively bend or otherwise damage the
cord, or place heavy objects on it.
• Only use the voltage specified as correct for
the instrument. The required voltage is printed
on the name plate of the instrument.
• Use the specified adaptor (page 35) only.
Using the wrong adaptor can result in damage
to the instrument or overheating.
• Check the electric plug periodically and
remove any dirt or dust which may have
accumulated on it.
Do not open
• This instrument contains no user-serviceable
parts. Do not open the instrument or attempt to
disassemble or modify the internal
components in any way. If it should appear to
be malfunctioning, discontinue use
immediately and have it inspected by qualified
Yamaha service personnel.
Location (if Bluetooth
functionality is included)
(For information on whether Bluetooth
functionality is included or not, refer to page 9.)
• Radio waves may affect electro-medical
devices.
- Do not use this product near medical
devices or inside areas in which the use of
radio waves is restricted.
- Do not use this product within 15 cm (6 in.) of
persons with a heart pacemaker implant.
WARNING
Always follow the basic precautions listed
below to avoid the possibility of serious
injury or even death from electrical shock,
short-circuiting, damages, fire or other
hazards. These precautions include, but
are not limited to, the following:
Water warning
• Do not expose the instrument to rain, use it
near water or in damp or wet conditions, or
place on it any containers (such as vases,
bottles or glasses) containing liquids which
might spill into any openings. If any liquid such
as water seeps into the instrument, turn off the
power immediately and unplug the power cord
from the AC outlet. Then have the instrument
DMI-5 1/3
SHS-500 Owner’s Manual 5
inspected by qualified Yamaha service
personnel.
• Never insert or remove an electric plug with
wet hands.
Fire warning
• Do not put burning items, such as candles, on
the unit.
A burning item may fall over and cause a fire.
Battery
• Follow the precautions below. Failure to do so
might result in explosion, fire, overheating or
battery fluid leakage.
- Do not tamper with or disassemble batteries.
- Do not dispose of batteries in fire.
- Do not attempt to recharge batteries that are
not designed to be charged.
- Keep the batteries separate from metallic
objects such as necklaces, hairpins, coins,
and keys.
- Use the specified battery type (page 35)
only.
- Use new batteries, all of which are the same
type, same model, and made by the same
manufacturer.
- Always make sure all batteries are inserted in
conformity with the +/- polarity markings.
- When the batteries run out, or if the
instrument is not to be used for a long time,
remove the batteries from the instrument.
- When using Ni-MH batteries, follow the
instructions that came with the batteries. Use
only the specified charger device when
charging.
• Keep batteries away from small children who
might accidentally swallow them.
• If the batteries do leak, avoid contact with the
leaked fluid. If the battery fluid should come in
contact with your eyes, mouth, or skin, wash
immediately with water and consult a doctor.
Battery fluid is corrosive and may possibly
cause loss of sight or chemical burns.
If you notice any abnormality
• When one of the following problems occur,
immediately turn off the power switch and
disconnect the electric plug from the outlet. (If
you are using batteries, remove all batteries
from the instrument.) Then have the device
inspected by Yamaha service personnel.
- The power cord or plug becomes frayed or
damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the
instrument.
- There is a sudden loss of sound during use
of the instrument.
CAUTION
Always follow the basic precautions listed
below to avoid the possibility of physical
injury to you or others, or damage to the
instrument or other property. These
precautions include, but are not limited to,
the following:
Power supply/AC adaptor
• Do not connect the instrument to an electrical
outlet using a multiple-connector. Doing so
can result in lower sound quality, or possibly
cause overheating in the outlet.
• When removing the electric plug from the
instrument or an outlet, always hold the plug
itself and not the cord. Pulling by the cord can
damage it.
• Remove the electric plug from the outlet when
the instrument is not to be used for extended
periods of time, or during electrical storms.
Location
• Do not place the instrument in an unstable
position where it might accidentally fall over.
• Before moving the instrument, remove all
connected cables, to prevent damage to the
cables or injury to anyone who might trip over
them.
6 SHS-500 Owner’s Manual
DMI-5 2/3
• When setting up the product, make sure that
the AC outlet you are using is easily
accessible. If some trouble or malfunction
occurs, immediately turn off the power switch
and disconnect the plug from the outlet. Even
when the power switch is turned off, electricity
is still flowing to the product at the minimum
level. When you are not using the product for a
long time, make sure to unplug the power cord
from the wall AC outlet.
Connections
• Before connecting the instrument to other
electronic components, turn off the power for
all components. Before turning the power on
or off for all components, set all volume levels
to minimum.
• Be sure to set the volumes of all components
at their minimum levels and gradually raise the
volume controls while playing the instrument to
set the desired listening level.
• Do not use the instrument/device or
headphones for a long period of time at a high
or uncomfortable volume level, since this can
cause permanent hearing loss. If you
experience any hearing loss or ringing in the
ears, consult a physician.
• When using a strap, make sure the strap is
securely attached to the instrument.
• Do not lift the instrument by the strap. It can
cause serious injury or damage to the
instrument.
• Do not treat the instrument in a rough manner
such as swinging it about, etc. The strap on
the instrument may detach causing
unexpected accidents such as the instrument
dropping, etc., or injuring persons close by.
Yamaha cannot be held responsible for
damage caused by improper use or
modifications to the instrument, or data that
is lost or destroyed.
Handling caution
• Do not insert a finger or hand in any gaps on
the instrument.
• Never insert or drop paper, metallic, or other
objects into the gaps on the panel or
keyboard. This could cause physical injury to
you or others, damage to the instrument or
other property, or operational failure.
• Do not rest your weight on, or place heavy
objects on the instrument, and do not use
excessive force on the buttons, switches or
connectors.
The model number, serial number, power requirements, etc., may be found on or near the name
plate, which is at the bottom of the unit. You should note this serial number in the space provided
below and retain this manual as a permanent record of your purchase to aid identification in the
event of theft.
Model No.
Serial No.
Always turn the power off when the instrument is
not in use.
Even when the [ ] (Standby/On) switch is in
standby status (display is off), electricity is still
flowing to the instrument at the minimum level.
When you are not using the instrument for a long
time, make sure you unplug the power cord from
the wall AC outlet.
Make sure to discard used batteries according to
local regulations.
(bottom_en_01)
DMI-5 3/3
SHS-500 Owner’s Manual 7
NOTICE
To avoid the possibility of malfunction/ damage
to the product, damage to data, or damage to
other property, follow the notices below.
Handling
• Do not use the instrument in the vicinity of a
TV, radio, stereo equipment, mobile phone, or
other electric devices. Otherwise, the
instrument, TV, or radio may generate noise.
When you use the instrument along with an
application on your iPad, iPhone or iPod
touch, we recommend that you set “Airplane
Mode” to “ON” on the device and then the
Bluetooth
noise caused by communication.
• Do not expose the instrument to excessive
dust or vibrations, or extreme cold or heat
(such as in direct sunlight, near a heater, or in
a car during the day) to prevent the possibility
of panel disfiguration, damage to the internal
components or unstable operation. (Verified
operating temperature range: 5° – 40°C, or
41° – 104°F.)
• Do not place vinyl, plastic or rubber objects
on the instrument, since this might discolor
the panel or keyboard.
Maintenance
• When cleaning the instrument, use a soft and
dry cloth. Do not use paint thinners, solvents,
alcohol, cleaning fluids, or chemicalimpregnated wiping cloths.
Saving data
• Some of the data of this instrument (page 32)
are retained when the power is turned off.
However, the saved data may be lost due to
some failure, an operation mistake, etc.
®
setting to “ON” in order to avoid
• This product incorporates and bundles
contents in which Yamaha owns copyrights or
with respect to which Yamaha has license to
use others’ copyrights. Due to copyright laws
and other relevant laws, you are NOT allowed
to distribute media in which these contents
are saved or recorded and remain virtually
the same or very similar to those in the
product.
* The contents described above include a
computer program, Accompaniment Style
data, MIDI data, WAVE data, voice
recording data, a score, score data, etc.
* You are allowed to distribute medium in
which your performance or music
production using these contents is
recorded, and the permission of Yamaha
Corporation is not required in such cases.
About this manual
• The illustrations and LCD screens as shown
in this manual are for instructional purposes
only, and may appear somewhat different
from those on your instrument.
• The letters at the end of the model name (“B”
or “RD”) are color information of the
instrument. For example, “B” indicates
“black,” and “RD” indicates “red.” Since they
simply indicate the color, these letters are
omitted in this manual.
• iPhone, iPad, iPod touch and Lightning are
trademarks of Apple Inc., registered in the
U.S. and other countries.
• Android™ is a trademark of Google LLC.
• IOS is a trademark or registered trademark of
Cisco in the U.S. and other countries and is
used under license.
• The Bluetooth
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by
Yamaha Corporation is under license.
®
word mark and logos are
Information
About copyrights
• Copying of the commercially available
musical data including but not limited to MIDI
data and/or audio data is strictly prohibited
except for your personal use.
8 SHS-500 Owner’s Manual
• The company names and product names in
this manual are the trademarks or registered
trademarks of their respective companies.
About Bluetooth
• For information on handling Bluetooth
communications, refer to “About Bluetooth”
on pages 9 and 37.
Compatible Formats
[FUNCTION] button
[SELECT] knob
Display
Function menu
Val ue
Bluetooth icon
Display
GM System Level 1
“GM System Level 1” is an addition to the MIDI standard which ensures that any GMcompatible music data can be accurately played by any GM-compatible tone generator,
regardless of manufacturer.
About Bluetooth
Bluetooth capability
Depending on the country in which you purchased the product, the instrument may not have
Bluetooth capability. If the Bluetooth icon is displayed in the upper right corner of the display as
illustrated above, or the value “BLE MIDI” (Bluetooth MIDI) is selectable in the lower of the display,
this means that the product is equipped with Bluetooth functionality.
To confirm that the value “BLE MIDI” is selectable or not, press the [FUNCTION] button repeatedly
to call up the Function menu “MIDI Select” in the upper of the display, then rotate the [SELECT]
knob to select the value in the bottom of the display.
Keep in mind that it is only MIDI data, and not audio data, that can be received and transmitted by
this instrument via Bluetooth.
SHS-500 Owner’s Manual 9
Thank you for purchasing the keytar Yamaha Digital Keyboard!
The keytar not only lets you enjoy playing the keyboard—even strapped around your
shoulder like a guitar—but also gives you powerful tools for effortlessly playing along with
your favorite music, by connecting to the smart device app “Chord Tracker.”
We recommend that you read this manual carefully so that you can fully take advantage of
the advanced and convenient functions of the instrument.
We also recommend that you keep this manual in a safe and handy place for future
reference.
About the Manuals
This instrument has the following documents and instructional materials.
Owner’s Manual (this book)
Explains how to get started with the instrument and how to use main feature
Jam function. For more detailed information, refer to online manual “Reference
Manual” below.
Reference Manual (Online Manual)
Provides more detailed information.
To obtain online manual (PDF), access the Yamaha Downloads website, then enter the
model name for searching the desired files.
Yamaha Downloads
https://download.yamaha.com/
Included Accessories
• Owner’s Manual x1
•AC Adaptor* x1
•Strap x1
• MIDI breakout cable x1
• Online Member Product Registration x1
* May not be included depending on your particular area. Please check with your Yamaha dealer.
10 SHS-500 Owner’s Manual
Contents
Features .............................................................................................................. 11
Functions of Panel Components ..................................................................... 12
Setting Up ........................................................................................................... 16
Try Playing a Variety of Instrument Voices ..................................................... 21
Enjoy Playing with the Jam Function............................................................... 23
Backup and Initialization ................................................................................... 32
Troubleshooting ................................................................................................. 33
Specifications ..................................................................................................... 34
Index .................................................................................................................... 36
Features
Amazingly easy and powerful performance functions .......................... page 23
With the Jam Function, you can instantly enjoy playing along with your favorite songs. Simply connect
the instrument with the free app “Chord Tracker” and play along with songs stored to your smart
device. No matter which keys you press, the notes automatically match the song, so you don’t have to
worry about fingering or even knowing the proper scales and chords. You can simply lose yourself in
the performance, just as if you were jamming with your favorite artist.
For information on devices that are compatible with “Chord Tracker,” check the Yamaha website.
Control interface for authentic playing ........................................... pages 15, 22
In addition to a Pitch Bend wheel and Modulation wheel, the instrument also features knobs that let
you control a wide range of effects, giving you extraordinarily expressive, dynamic performance
power.
Slim and ultra-lightweight body
An ultralight body weighing only 1.5 kg and slim form make the instrument easily portable. It can also
be used on battery power, letting you enjoy playing anywhere you want.
SHS-500 Owner’s Manual 11
Functions of Panel Components
8
7
5
4
3
2
1
9
)
6
(Bottom of the unit)
1 DC IN jack (page 17)
For connecting the AC adaptor.
2 [VOLUME] dial (page 19)
For adjusting the overall volume.
3 [P] (Standby/On) switch (page 19)
For turning the power on or setting it to standby.
4 [LINE OUT] jack (1/4" mono phone)
For connecting a powered speaker or a mixing console for playing in larger venues at higher
volumes (with 1/4" mono phone plug). To control the LINE OUT volume, adjust the volume of the
connected audio equipment.
NOTICE
To avoid possible damage, first turn on the power to the instrument, then to the external device. When
turning off the power, first turn off the power to the external device, then to the instrument.
5 [AUX IN] jack (3.5 mm, mini stereo phone)
For inputting the sound of an audio player and listening to it through the built-in speaker of the
instrument (with 3.5 mm, mini stereo phone plug). To adjust the input volume from [AUX IN] jack,
adjust the audio playback volume on the audio device.
NOTICE
To avoid damage to the devices, first turn on the power to the external device, then to the instrument.
When turning off the power, first turn off the power to the instrument, then to the external device.
12 SHS-500 Owner’s Manual
6 [TO HOST] terminal (page 28)
SHS-500
PHONES
MIDI
MIDI IN
MIDI OUT
TO HOST
LINE OUT
AUX IN
Smart device
Headphones
Audio player
Powered speaker
MIDI device
MIDI breakout cable
PC
MIDI OUT
terminal
MIDI IN
terminal
For connecting a computer or a smart device by using a USB cable, in order to transmit/receive
MIDI data or audio data (using the USB audio interface function). For details on the USB audio
interface function, refer to the “Reference Manual.” When transmitting/receiving MIDI data, you
may need to call up the Function settings (see “MIDI transmission/reception” below).
7 [MIDI] terminal
For connecting other MIDI devices via the included MIDI breakout cable and standard MIDI
cables (sold separately). When transmitting/receiving MIDI data, you may need to call up the
Function settings (see “MIDI transmission/reception” below).
8 [SELECT] knob (page 21)
For selecting a Voice to play on the keyboard. The selected Voice name will be shown in the
display.
While the [FUNCTION] button indicator is lit, this knob works as a value selector for the Function.
9 [EFFECT] selector (page 22)
For selecting the effect which is applied to the Voice. This selector is used in conjunction with the
[EFFECT CONTROL] knob.
) [EFFECT CONTROL] knob (page 22)
For setting the value of the effect which is selected by [EFFECT] selector. Turning the knob
clockwise increases the depth of the effect.
Connection example
Connect to your smart device by Bluetooth or by the USB cable. Confirm Bluetooth availability on
page 9, and then refer to pages 27 and 28.
MIDI transmission/reception
Make sure to match the MIDI transmit/receive port as well as the value of the Function “MIDI Select” setting. Press the
[FUNCTION] button repeatedly to call up “MIDI Select” at the top of the display, then rotate the [SELECT] knob to
select an appropriate value at the bottom: “BLE MIDI” (Bluetooth), “USB MIDI” (TO HOST) or “MiniMIDI” (MIDI).
SHS-500 Owner’s Manual 13
! Display
B
!
^
(
A
*
&
#
$
%
@
Normally indicates the Voice name
Transpose
T-1: down in semitone units
T±0: no change in pitch
T+1: up in semitone units
Octave
O-1: 1 octave down
O±0: no change in pitch
O+1: 1 octave up
MIDI Select
USB connection
MIDI connection
Power
(Adaptor or remaining battery
power indication)
Bluetooth connection
Current settings are shown in the display.
@ [PHONES] jack
For connecting a pair of stereo headphones with a mini stereo phone plug (3.5 mm). The
instrument’s built-in speakers automatically stop producing sound when headphones are
connected to this jack. However, the [LINE OUT] jack will continue to output the same sound as
the [PHONES] jack.
CAUTION
To prevent hearing loss, avoid using headphones at high volumes for extended periods of time.
# [OCTAVE] buttons [-][+]
For shifting the pitch of the keyboard up or down by one octave. Pressing simultaneously resets to
the default setting. The current setting is shown in the display.
$ [TRANSPOSE] buttons [-][+]
For transposing the pitch of the keyboard up or down (in semitones). Pressing simultaneously
resets to the default setting. The current setting is shown in the display.
14 SHS-500 Owner’s Manual
Loading...