Yamaha HTR-6150 User Manual

HTR-6150

AV Receiver Ampli-tuner audio-vidéo

OWNER’S MANUAL

MODE D’EMPLOI

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1 Read Instructions – All the safety and operating instructions

should be read before the product is operated.

2 Retain Instructions – The safety and operating instructions

should be retained for future reference.

3 Heed Warnings – All warnings on the product and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and use instructions

should be followed.

5 Cleaning – Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners.

6 Attachments – Do not use attachments not recommended by

the product manufacturer as they may cause hazards.

7 Water and Moisture – Do not use this product near water –

for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8 Accessories – Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

9 A product and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10 Ventilation – Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11 Power Sources – This product should be operated only from

the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

12 Grounding or Polarization – This product may be equipped

with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

13 Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

14 Lightning – For added protection for this product during a

lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

15 Power Lines – An outside antenna system should not be

located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16 Overloading – Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17 Object and Liquid Entry – Never push objects of any kind

into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

18 Servicing – Do not attempt to service this product yourself

as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19 Damage Requiring Service – Unplug this product from the

wall outlet and refer servicing to qualified service personnel under the following conditions:

a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the

product,

c) If the product has been exposed to rain or water,

Caution-i En

IMPORTANT SAFETY INSTRUCTIONS

d) If the product does not operate normally by following

the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation,

e) If the product has been dropped or damaged in any

way, and

f) When the product exhibits a distinct change in perfor-

mance - this indicates a need for service.

20 Replacement Parts – When replacement parts are required,

be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

21 Safety Check – Upon completion of any service or repairs to

this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

22 Wall or Ceiling Mounting – The unit should be mounted

to a wall or ceiling only as recommended by the manufacturer.

23 Heat – The product should be situated away from heat

sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

24 Outdoor Antenna Grounding – If an outside antenna or

cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810–20)

GROUNDING CONDUCTORS (NEC SECTION 810–21)

GROUND CLAMPS

ELECTRIC SERVICE EQUIPMENT

NEC – NATIONAL ELECTRICAL CODE

MAST

GROUND CLAMP

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H)

FCC INFORMATION (for US customers)

1 IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2 IMPORTANT: When connecting this product to

accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3 NOTE: This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave., Buena Park, CA

90620.

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

Caution-ii En

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

Caution: Read this before operating your unit.

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this sound system in a well ventilated, cool, dry, clean

place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.

3 Locate this unit away from other electrical appliances, motors,

or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from

cold to hot, and do not locate this unit in a environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may fall onto

this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: – other components, as they may cause damage and/or

discoloration on the surface of this unit.

– burning objects (i.e. candles), as they may cause fire,

damage to this unit, and/or personal injury.

– containers with liquid in them, as they may fall and liquid

may cause electrical shock to the user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain,

etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections

are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use force on switches, knobs and/or cords. 10 When disconnecting the power cable from the wall outlet,

grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this

unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power cord and

outdoor antennas disconnected from a wall outlet or the unit during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified

Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time

(i.e. vacation), disconnect the AC power plug from the wall outlet.

16 Install this unit near the AC outlet and where the AC power

plug can be reached easily.

17 Be sure to read the “Troubleshooting” section on common

operating errors before concluding that this unit is faulty.

18 Before moving this unit, press CSYSTEM OFF to set this

unit in the standby mode, and disconnect the AC power plug from the wall outlet.

19 VOLTAGE SELECTOR (Asia and General models only)

The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC wall outlet. Voltages are 110–120/220–240 V AC, 50/60 Hz.

20 The batteries shall not be exposed to excessive heat such as

sunshine, fire or like.

21 Excessive sound pressure from earphones and headphones can

cause hearing loss.

WAR NING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off by

CSYSTEM OFF.

This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003.

IMPORTANT

Please record the serial number of this unit in the space below. MODEL: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.

Caution-iii En

Contents

INTRODUCTION

Features ................................................................... 2

Getting started ........................................................ 3

Quick start guide .................................................... 4

Preparation: Check the items ..................................... 4

Step 1: Set up your speakers ...................................... 5

Step 2: Connect your DVD player and other

components............................................................ 6

Step 3: Press SCENE 1 button................................... 7

What do you want to do with this unit? ..................... 8

PREPARATION

Connections ............................................................. 9

Rear panel .................................................................. 9

Placing speakers....................................................... 10

Connecting speakers ................................................ 11

Information on jacks and cable plugs ...................... 13

Information on HDMI™.......................................... 14

Audio and video signal flow.................................... 15

Connecting video components................................. 16

Connecting other components ................................. 17

Connecting audio components................................. 19

Connecting a Yamaha iPod™ universal dock or

Bluetooth™ adapter............................................. 20

Using REMOTE IN/OUT jacks............................... 20

Using the VIDEO AUX jacks on the front panel .... 21

Connecting the FM and AM antennas ..................... 21

Connecting the power cable..................................... 22

Setting the speaker impedance................................. 23

Turning on and off the power .................................. 23

Front panel display .................................................. 24

Optimizing the speaker setting

for your listening room .................................... 26

Using AUTO SETUP .............................................. 26

XM Satellite Radio tuning ....................................48

Connecting the XM Mini-Tuner Dock .................... 48

Activating XM Satellite Radio ................................ 49

Basic XM Satellite Radio operations....................... 49

Setting XM Satellite Radio preset channels ............ 51

Displaying the XM Satellite Radio information...... 52

SIRIUS Satellite Radio™ tuning .........................53

Connecting the SiriusConnect™ tuner .................... 53

Activating SIRIUS Satellite Radio™ subscription.. 54

Basic SIRIUS Satellite Radio™ operations ............ 54

Setting the SIRIUS Satellite Radio™ preset

channels ............................................................... 56

Setting the Parental Lock......................................... 56

Displaying the SIRIUS Satellite Radio™

information .......................................................... 58

Using iPod™ ..........................................................59

Controlling iPod™................................................... 59

Using Bluetooth™ components ............................61

Pairing the Bluetooth™ adapter and your Bluetooth™

component ........................................................... 61

Playback of the Bluetooth™ component ................. 61

Recording ...............................................................62

ADVANCED OPERATION

SET MENU ............................................................ 63

Using SET MENU................................................... 64

1 SOUND MENU.................................................... 65

2 INPUT MENU...................................................... 71

3 OPTION MENU................................................... 73

Remote control features........................................76

Controlling this unit, a TV, or other components.... 76

Setting remote control codes ................................... 78

Using multi-zone configuration............................79

Connecting Zone 2................................................... 79

Controlling Zone 2................................................... 80

Advanced setup......................................................82

PREPARATIONINTRODUCTION

OPERATION

BASIC

OPERATION

ADVANCED

BASIC OPERATION

Selecting the SCENE templates........................... 30

Selecting the desired SCENE template.................... 30

Creating your original SCENE templates ................ 33

Using remote control on the SCENE feature........... 34

Playback ................................................................ 35

Basic operations....................................................... 35

Selecting audio input jacks

(AUDIO SELECT).............................................. 36

Selecting the MULTI CH INPUT component ......... 36

Displaying the current status of this unit on a video

monitor ................................................................ 37

Using your headphones............................................ 37

Muting the audio output........................................... 37

Playing video sources in the background of an audio

source................................................................... 38

Displaying the input source information ................. 38

Using the sleep timer ............................................... 39

Sound field programs ........................................... 40

Sound field program descriptions ............................ 40

Using audio features ............................................. 43

Enjoying high quality sound.................................... 43

Adjusting the tonal quality....................................... 43

Adjusting the speaker level...................................... 43

Selecting the night listening mode........................... 44

FM/AM tuning ...................................................... 45

Automatic tuning ..................................................... 45

Manual tuning.......................................................... 45

Automatic preset tuning........................................... 46

Manual preset tuning ............................................... 46

Selecting preset stations........................................... 47

Exchanging preset station ........................................ 47

ADDITIONAL INFORMATION

Troubleshooting.....................................................84

Glossary..................................................................94

Specifications .........................................................97

Index .......................................................................98

APPENDIX

(at the end of this manual)

Front panel................................................................i

Remote control ....................................................... ii

List of remote control codes ................................. iii

About this manual

• y indicates a tip for your operation.

• Some operations can be performed by using either the buttons on the front panel or the ones on the remote control. In case the button names differ between the front panel and the remote control, the button name on the remote control is given in parentheses.

• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority.

•“MSPEAKERS” or “4DVD” (example) indicates the name of the parts on the front panel or the remote control. Refer to the attached sheet or the pages at the end of this manual for the information about each position of the parts.

• The symbol “☞ ” with page number(s) indicates the corresponding reference page(s).

INFORMATION

ADDITIONAL

APPENDIX

English

1 En

Features

Built-in 7-channel power amplifier

◆ Minimum RMS output power [U.S.A. and Canada models] (1 kHz, 0.9% THD, 8 Ω) 90 W/ch [Other models] (1 kHz, 0.9% THD, 6 Ω) 90 W/ch

SCENE select function

◆ Preset SCENE templates for various situations

◆ SCENE template customizing capability

Decoders and DSP circuits

◆ Proprietary Yamaha technology for the creation of multichannel surround sound

◆ Compressed Music Enhancer mode

◆ Dolby Digital/Dolby Digital EX decoder

◆ DTS/DTS-ES Matrix, Discrete, DTS Neo:6,

DTS 96/24 decoder

◆ Dolby Pro Logic/Dolby Pro Logic II/Dolby Pro Logic IIx decoder

◆ Neural Surround decoder (U.S.A. and Canada models only)

◆ Virtual CINEMA DSP

◆ SILENT CINEMA

™

Radio tuners

◆ FM/AM tuning capability

◆ XM Satellite Radio tuning capability (using XM Mini-Tuner

and Home Dock, sold separately)

◆ SIRIUS Satellite Radio™ tuning capability (using SIRIUS Connect tuner, sold separately)

HDMI (High-Definition Multimedia Interface)

◆ HDMI interface for standard, enhanced or high-definition video (includes 1080p video signal transmission) as well as multi-channel digital audio

DOCK terminal

◆ DOCK terminal to connect a Yamaha iPod universal dock (such as YDS-10, sold separately) or Bluetooth adapter (such as YBA-10, sold separately).

Other features

◆ YPAO (Yamaha Parametric Room Acoustic Optimizer) for automatic speaker setup

◆ 192-kHz/24-bit D/A converter

◆ DIRECT mode for high quality sound for all sources

◆ 6 additional input jacks for discrete multi-channel input

◆ OSD (on-screen display) menus that allow you to optimize

this unit to suit your individual audiovisual system

◆ Component video input/output capability (3 COMPONENT VIDEO INs and 1 MONITOR OUT)

◆ S-video signal input/output capability

◆ Optical and coaxial digital audio signal jacks

◆ Sleep timer

◆ Cinema and music night listening modes

◆ iPod controlling capability

◆ Remote control with preset remote control codes

◆ Zone 2 custom installation facility

◆ Bi-amplification connection capability

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

“SILENT CINEMA” is a trademark of YAMAHA CORPORATION.

iPod™

“iPod” is a trademark of Apple, Inc., registered in the U.S. and other countries.

Bluetooth™

Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a license agreement.

“HDMI”, the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks or registered trademarks of HDMI Licensing LLC.

2 En

DTS-ES | NEO:6 | 96/24. Product “DTS” and “DTS-ES | NEO:6” are registered trademarks of DTS, Inc. “96/24” is a trademark of DTS, Inc.

The XM name and related logos are registered trademarks of XM Satellite Radio Inc.

Neural Surround by Neural Audio Corporation.

™

name and related logos are trademarks owned

Getting started

■ Supplied accessories

Check that you received all of the following parts.

❏ Remote control ❏ Batteries (2) (AAA, R03, UM-4) ❏ Optimizer microphone ❏ AM loop antenna ❏ Indoor FM antenna

■ VOLTAGE SELECTOR

(Asia and General models only)

Caution

The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local voltage BEFORE plugging the power cable into the AC wall outlet. Improper setting of the VOLTAGE SELECTOR may cause damage to this unit and create a potential fire hazard.

Rotate the VOLTAGE SELECTOR clockwise or counterclockwise to the correct position using a straight slot screwdriver. Voltages are as follows:

Asia model ................... 220/230–240 V AC, 50/60 Hz

General model

...................... 110/120/220/230–240 V AC, 50/60 Hz

VOLTAGE

SELECTOR

230240V

Voltage indication

■ Installing batteries in the remote control

1 Take off the battery compartment cover.

2 Insert the two supplied batteries

(AAA, R03, UM-4) according to the polarity markings (+ and –) on the inside of the battery compartment.

3 Snap the battery compartment cover back

into place.

Notes

• Change all of the batteries if you notice that the operation range of the remote control decreases.

• Do not use an old battery and a new one together.

• Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.

• If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

• Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations.

• If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries and set up the remote control code.

INTRODUCTION

We Want You Listening For A Lifetime

Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing.

Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

English

3 En

Quick start guide

The following steps describe the easiest way to enjoy DVD movie playback in your home theater.

Front right

Video monitor

Front left

speaker

Center speaker

DVD player

Step 1: Set up your speakers

Step 2: Connect your DVD player

speaker

Surround left

speaker

Subwoofer

Surround back left

speaker

Surround right

speaker

Surround back

right speaker

☞

P. 5

and other components

☞

P. 6

Preparation: Check the items

Prepare the following items.

❏ Speakers

❏ Front speaker .....................................x 2

❏ Center speaker ...................................x 1

❏ Surround speaker ..............................x 4

Select magnetically shielded speakers. The minimum required speakers are two front speakers. The priority of the requirement of other speakers is as follows:

1. Two surround speakers

2. Center speaker

3. One (or two) surround back speaker(s)

❏ Active subwoofer ...................................x 1

Select an active subwoofer equipped with an RCA input jack.

❏ Speaker cable .........................................x 7

❏ Subwoofer cable .....................................x 1

Select a monaural RCA cable.

❏ DVD player ..............................................x 1

Select DVD player equipped with coaxial digital audio output jack and composite video output jack.

❏ Video monitor ..........................................x 1

Select a TV monitor, video monitor or projector equipped with a composite video input jack.

❏ Video cable .............................................x 2

Select an RCA composite video cable.

❏ Digital coaxial audio cable ....................x 1

Step 3: Press SCENE 1 button

Enjoy DVD playback!

4 En

☞

P. 7

Step 1: Set up your speakers

Place your speakers in the room and connect them to this unit.

SPEAKERS

COAXIAL

OPTICAL

DTV/CBL CD

DVD

VIDEO

OUT

DIGITAL INPUT

DVD

RPBYPRPB

MONITOR OUT

MONITOR

OUT

XM SIRIUS DOCK

COMPONENT VIDEO ANTENNA

DTV/CBL

DVR

MONITOR

OUT S VIDEOIN

DTV/CBL DVRDVD

OUT

CENTER

SUB

FRONT(6CH)

SB(8CH)

SUB

WOOFER

SUB

SURROUND

WOOFER

ZONE 2

OUTPUT

MULTI CH INPUTAUDIO

OUTPUT

OUT

DTV/CBL

OUT

DVD

IN1 IN2

HDMI

REMOTE

OUT

+12V

VIDEO

15mA MAX.

TRIGGER

DTV/CBL DVRDVD

OUT

MD/

OUT

CD-R

(REC)

(PLAY)

DTV/CBL DVRDVD

1 Place your speakers and subwoofer in the

room.

SPEAKERS

SURROUND BACK/BI-AMP

SURROUND

GND

UNBAL.

SURROUND

SINGLE

FRONT B

FRONT ACENTER

FRONT B

FRONT ACENTER

AC OUTLETS

SWITCHED

Quick start guide

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly.

Front and center speakers

Loosen Insert Tighten

INTRODUCTION

2 Connect speaker cables to each speaker.

Cables are colored or shaped differently, perhaps with a stripe, groove or ridge. Connect the striped (grooved, etc.) cable to the “+” (red) terminals of your speaker. Connect the plain cable to the “–” (black) terminals.

3 Connect each speaker cable to the

corresponding speaker terminal of this unit.

12 3 4

1 Make sure that this unit and the subwoofer are

unplugged from the AC wall outlets.

2 Twist the exposed wires of the speaker cables

together to prevent short circuits.

3 Do not let the bare speaker wires touch each other. 4 Do not let the bare speaker wires touch any metal

part of this unit.

To the center

speaker

To the front

right speaker

To the front left speaker

Surround and surround back speakers

To the surround

back right

speaker

To the surround back left speaker

To the surround right speaker

To the surround left speaker

4 Connect the subwoofer cable to the input

jack of the subwoofer and the SUBWOOFER OUTPUT jack of this unit.

Subwoofer

AV receiver

Input jack

Subwoofer cable

SUBWOOFER OUTPUT jack

English

5 En

Quick start guide

Step 2: Connect your DVD player

and other components

COAXIAL

OPTICAL

DTV/CBL CD

DVD

DTV/CBL CDDVD

DTV/CBL

OUT

DVD

IN1 IN2

HDMI

REMOTE

OUT

+12V

VIDEO

15mA MAX.

TRIGGER

OUT

MD/

OUT

CD-R

(REC)

(PLAY)

DIGITAL INPUT

DVD

MONITOR OUT

VIDEO

MONITOR

OUT

OUTIN

DTV/CBL DVRDVD

OUT

DTV/CBL DVRDVD

XM SIRIUS DOCK

COMPONENT VIDEO ANTENNA

RPBYPRPB

DTV/CBL Y

MONITOR

OUT S VIDEOIN

DTV/CBL DVRDVD

OUT

CENTER

SUB

FRONT(6CH)

SURROUND

WOOFER

SB(8CH)

ZONE 2

MULTI CH INPUTAUDIO

OUT

DVR

SUB

WOOFER

OUTPUT

Make sure that this unit and the DVD player are unplugged from the AC wall outlets.

1 Connect the digital coaxial audio cable to the

digital coaxial audio output jack of your DVD player and the DVD DIGITAL INPUT COAXIAL jack of this unit.

DVD player

Digital coaxial

audio output jack

Digital coaxial audio

cable

2 Connect the video cable to the composite

video output jack of your DVD player and the DVD VIDEO jack of this unit.

DVD player

SPEAKERS

SURROUND BACK/BI-AMP

GND

75 UNBAL.

SURROUND

SINGLE

FRONT B

FRONT ACENTER

AC OUTLETS

SWITCHED

AV receiver

DVD DIGITAL INPUT

COAXIAL jack

AV receiver

3 Connect the video cable to the video input

jack of your video monitor and the VIDEO MONITOR OUT jack of this unit.

AV receiver

VIDEO MONITOR OUT

jack

Video input

jack

Video monitor

Video cable

4 Connect the power plug of this unit and other

components into the AC wall outlet.

This unit is equipped with AC OUTLET(S) for the power supply of the other components (except Korea model). See page 22 for details.

■ For further connections

• Using the other kind of speaker combinations ☞ P. 11

• Connecting video components ☞ P. 16

• Connecting a DVD player ☞ P. 17

• Connecting a DVD recorder ☞ P. 18

• Connecting a set-top box ☞ P. 18

• Connecting a CD player and a CD recorder/ MD recorder ☞ P. 19

• Connecting a multi-format player or an external decoder ☞ P. 19

• Connecting a Yamaha iPod/Bluetooth dock

☞ P. 20

• Connecting the REMOTE IN/OUT jacks

☞ P. 20

• Using the VIDEO AUX jacks on the front panel ☞ P. 21

• Connecting an FM/AM antenna ☞ P. 21

• Connecting the XM Mini-Tuner Dock

☞ P. 48

• Connecting the SIRIUS Connect tuner

☞ P. 53

Composite video

output jack

6 En

Video cable

DVD VIDEO jack

Step 3: Press SCENE 1 button

Check the type of the connected speakers.

If the speakers are 6 ohm speakers, set “SP IMP.” to “6Ω MIN” before using this unit (see page 23).

1 Turn on the video monitor and then set the

input source selector of the video monitor to this unit.

Quick start guide

■ About SCENE function

Just by pressing one SCENE button, you can turn on this unit and recall your favorite input source and sound field program according to the SCENE template that has been assigned to the SCENE button. The SCENE templates are built combinations of input sources and sound field programs.

If you connect a Yamaha product that has capability of the SCENE control signals, this unit can automatically activate the component and start playback. Refer to the instruction manual of the DVD player for further information.

INTRODUCTION

2 Press

SCENE 1.

This unit is turned on. “DVD Viewing” appears in the front panel display, and this unit automatically optimize own status for the DVD playback.

The indicator on the selected SCENE button lights up while this unit is in the SCENE mode.

3 Start playback of the desired DVD on your

player.

4 Rotate

VOLUME to adjust the volume.

■ Using the other SCENE buttons

Default SCENE

button

SCENE 1DVD Viewing

SCENE 2Disc Listening

SCENE

Notes

You must connect a cable TV or a satellite tuner to this unit in advance. See page 18 for details.

You need to connect the supplied FM and AM antennas to this unit in advance. See page 21 for details.

You must tune into the desired radio station. See pages 45 to 47 for the tuning information.

To achieve the best possible reception, orient the connected AM loop antenna, or adjust the position of the end of the indoor FM antenna.

If you cannot find the desired situation, you can select and change the assigned SCENE template for the SCENE buttons. See page 30 for details.

The name of the SCENE template

and its description

– input source: DVD – sound field program: STRAIGHT

For when you want to enjoy a DVD playback.

– input source: DVD

– sound field program: 7ch Stereo For when you want to listen to a music disc from the connected DVD player as the background music for this room.

TV Viewing

– input source: DTV/CBL

– sound field program: STRAIGHT For when you want to watch a TV program.

Radio Listening

– input source: TUNER

– sound field program: 7ch Enhancer For when you want to listen to a music program from the FM radio station.

*2, *3, *4

Note

When you change the input source or sound field program, the SCENE mode is deactivated, and the indicator on the selected SCENE button turns off.

English

7 En

Quick start guide

■ After using this unit...

Press AMAIN ZONE ON/OFF on the front panel to set this unit to the standby mode.

This unit is set to the standby mode. In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control. To turn on this unit from the standby mode, press AMAIN ZONE ON/OFF (or HPOWER). See page 23 for details.

What do you want to do with this unit?

■ Customizing the SCENE templates

• Using various SCENE templates ☞ P. 30

• Creating your original SCENE templates

☞ P. 33

■ Using various input sources

• Basic controls of this unit ☞ P. 35

• Enjoying FM/AM radio programs ☞ P. 45

• Enjoying XM Satellite Radio programs ☞ P. 48

• Enjoying SIRIUS Satellite Radio programs ☞ P. 53

• Using your iPod with this unit ☞ P. 59

• Using your Bluetooth components

with this unit ☞ P. 61

■ Using various sound features

• Using various sound field programs ☞ P. 40

• Using the direct mode for

the high quality sound ☞ P. 43

• Customizing the sound field programs ☞ P. 42

8 En

■ Adjusting the parameters of this unit

• Automatically optimizing the speaker

parameters for your listening room (AUTO SETUP) ☞ P. 26

• Manually adjusting various parameters of

this unit ☞ P. 63

• Setting the remote control ☞ P. 76

• Adjusting the advanced parameters☞ P. 82

■ Additional features

Automatically turning off this unit ☞ P. 39

Rear panel

Connections

(PLAY)

REMOTE

OUT

+12V 15mA MAX.

TRIGGER

DVD

IN1 IN2

HDMI

VIDEO

OUT

MD/

OUT

CD-R

(REC)

DTV/CBL

OUT

VIDEO

DTV/CBL DVRDVD

2 43 5 6 7 8

COAXIAL

DVD

MONITOR

OUT

OPTICAL

DTV/CBL CD

DIGITAL INPUT

MONITOR OUT

OUT

SURROUND

XM SIRIUS DOCK

MONITOR

OUT S VIDEOIN

CENTER

SUB

WOOFER

ZONE 2

OUT

COMPONENT VIDEO ANTENNA

RPB

YPRPBY

DTV/CBL DVRDVD

FRONT(6CH)

SB(8CH)

MULTI CH INPUTAUDIO

Name Page

1 HDMI jacks 14

2 DIGITAL INPUT jacks 13

3 COMPONENT VIDEO jacks 13

4 XM jack (U.S.A. and Canada models only) 48

5 SIRIUS jack

(U.S.A. and Canada models only)

6 DOCK terminal 20

7 Speaker terminals 11

8 VOLTAGE SELECTOR

(Asia and General models only)

9 REMOTE IN/OUT jacks 20

TRIGGER OUT jack

This is a control expansion jack for custom installation.

A AUDIO jacks 13

B VIDEO jacks 13

C MULTI CH INPUT jacks 19

D ZONE 2 OUT jacks 79

E SUBWOOFER OUTPUT jack 11

F ANTENNA terminals 21

G AC OUTLET(S) 22

DTV/CBL

DVR

OUTPUT

WOOFER

SPEAKERS

SURROUND BACK/BI-AMP

GND

UNBAL.

SUB

SINGLE

FRONT ACENTER

SURROUND

FRONT B

AC OUTLETS

SWITCHED

GFB EDCA9 0

(U.S.A. model)

PREPARATION

—

English

9 En

Connections

Placing speakers

The speaker layout below shows the speaker setting we recommend. You can use it to enjoy CINEMA DSP and multichannel audio sources.

30˚

30 cm (12 in) or more

80˚

SBL

60˚

SBR

SBL

Front left and right speakers (FL and FR)

The front speakers are used for the main source sound plus effect sounds. Place these speakers at an equal distance from the ideal listening position. The distance of each speaker from each side of the video monitor should be the same.

Center speaker (C)

The center speaker is for the center channel sounds (dialog, vocals, etc.). If for some reason it is not practical to use a center speaker, you can do without it. Best results, however, are obtained with the full system.

Surround left and right speakers (SL and SR)

The surround speakers are used for effect and surround sounds.

Surround back left and right speakers (SBL and SBR)

The surround back speakers supplement the surround speakers and provide more realistic front-to-back transitions.

Subwoofer (SW)

The use of a subwoofer with a built-in amplifier, such as the Yamaha Active Servo Processing Subwoofer System, is effective not only for reinforcing bass frequencies from any or all channels, but also for high fidelity sound reproduction of the LFE (low-frequency effect) channel included in Dolby Digital and DTS sources. The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce wall reflections.

10 En

Connections

Connecting speakers

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, this unit cannot reproduce the input sources accurately.

Caution

• Before connecting the speakers, make sure that the AC power plug is disconnected from the AC wall outlet.

• Do not let the bare speaker wires touch each other or let them touch any metal part of this unit. This could damage this unit and/or the speakers. If the speaker wires are short-circuited, “CHECK SP WIRES” appears in the front panel display when you turn on this unit.

• Use the magnetically shielded speakers. If this type of speaker still creates interference with the monitor, place the speakers away from the monitor.

• If you are to use 6 ohm speakers, be sure to set “SP IMP.” to “6Ω MIN” before using this unit. For details about the speaker impedance setting, see page 23.

When you use single surround back speaker, connect the speaker to the left SURROUND BACK terminal (SINGLE).

Surround back speakers

Right

Left

Surround speakers

Right

Left

PREPARATION

(PLAY)

OUT

+12V 15mA MAX.

DVD

IN1 IN2

REMOTE

TRIGGER

OUT

MD/

CD-R

(REC)

SURROUND BACK/BI-AMP

SINGLE

FRONT ACENTER

SPEAKERS

SURROUND

FRONT B

AC OUTLET S

SWITCHED

COAXIAL

DVD

DTV/CBL

HDMI

VIDEO

DTV/CBL DVRDVD

OUT

DTV/CBL DVRDVD

OUT

DVD

VIDEO

MONITOR

OUT

OPTICAL

DTV/CBL CD

DIGITAL INPUT

MONITOR OUT

OUT

SURROUND

XM SIRIUS DOCK

MONITOR

OUT S VIDEOIN

CENTER

SUB

WOOFER

ZONE 2

OUT

COMPONENT VIDEO ANTENNA

RPB

YPRPBY

DTV/CBL DVRDVD

FRONT(6CH)

SB(8CH)

MULTI CH INPUTAUDIO

DTV/CBL

DVR

OUTPUT

SUB

WOOFER

GND

UNBAL.

FRONT B terminals

Connect the alternative front speaker system

Center

(FRONT B).

speaker

Subwoofer

Right

Left

Front speakers

(FRONT A)

English

11 En

Connections

■ Before connecting to the SPEAKERS terminal

A speaker cord is actually a pair of insulated cables running side by side. Cables are colored or shaped differently, perhaps with a stripe, groove or ridges. Connect the striped (grooved, etc.) cable to the “+” (red) terminals of this unit and your speaker. Connect the plain cable to the “–” (black) terminals.

Remove approximately 10 mm (3/8”) of insulation from the end of each speaker cable and then twist the bare wires of the cable together to prevent short circuits.

10 mm (3/8”)

■ Connecting to the FRONT A terminals

Red: positive (+) Black: negative (–)

■ Using bi-amplification connections

Caution

Remove the shorting bars or bridges to separate the LPF (low pass filter) and HPF (high pass filter) crossovers.

This unit allows you to make bi-amplification connections to one speaker system. Check if your speakers support biamplification. To make the bi-amplification connections, use the FRONT and SURROUND BACK terminals as shown below. To activate the bi-amplification connections, set “BI-AMP” to “ON” in “Advanced setup” (see page 82).

Front speakers

Right

Left

1 Loosen the knob.

2 Insert the bare end of the speaker wire into

the hole on the terminal.

3 Tighten the knob to secure the wire.

Connecting the banana plug (except Europe, Russia, Korea, and Asia models)

The banana plug is a single-pole electrical connector widely used to terminate speaker cables. First, tighten the knob and then insert the banana plug connector into the end of the corresponding terminal.

Banana plug

FRONT A

This unit

SINGLE

SURROUND BACK/BI-AMP

Notes

• When you make the conventional connection, make sure that the shorting bars are put into the terminals appropriately. Refer to the instruction manuals of the speakers for details.

• When you use bi-amplification connections, you can not use surround back speakers.

12 En

Connections

Information on jacks and cable plugs

Connect one of the type of the audio jack(s) and/or video jack(s) that your input components are equipped with.

Audio jacks and cable plugs Video jacks and cable plugs

AUDIO

Left and right analog audio

cable plugs

(Red)(White) (Orange) (Yellow) (Red) (Blue) (Green)

DIGITAL AUDIO

COAXIAL

Coaxial

digital audio

cable plug

DIGITAL AUDIO

OPTICAL

Optical

digital

audio cable

plug

■ Audio jacks

This unit has three types of audio jacks. Connection depends on the availability of audio jacks on your other components.

AUDIO jacks

For conventional analog audio signals transmitted via left and right analog audio cables. Connect red plugs to the right jacks and white plugs to the left jacks.

DIGITAL AUDIO COAXIAL jacks

For digital audio signals transmitted via coaxial digital audio cables.

DIGITAL AUDIO OPTICAL jacks

For digital audio signals transmitted via optical digital audio cables.

Notes

• You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. Optical input jacks are compatible with digital signals with up to 96 kHz of sampling frequency.

• This unit handles digital and analog signals independently. Thus audio signals input at the digital jacks are not output at the analog AUDIO OUT (REC) jacks.

VIDEO S VIDEO

Composite

video cable

plug

S-video

cable plug

COMPONENT VIDEO

Component video cable

plugs

■ Video jacks

This unit has three types of video jacks. Connection depends on the availability of input jacks on your video monitor.

VIDEO jacks

For conventional composite video signals transmitted via composite video cables.

S VIDEO jacks

For S-video signals, separated into the luminance (Y) and chrominance (C) video signals transmitted on separate wires of S-video cables.

COMPONENT VIDEO jacks

For component signals, separated into the luminance (Y) and chrominance (P separate wires of component video cables.

Video signal flow for MONITOR OUT

COMPONENT VIDEO

S VIDEO

B, PR) video signals transmitted on

Input

PR PB Y PR PB Y

Output

(MONITOR OUT)

PREPARATION

VIDEO

Through

Video conversion ON (see page 73)

Note

The OSD signal is not output at the DVR OUT (REC) jacks.

13 En

English

Connections

Information on HDMI™

■ HDMI compatibility with this unit

Audio signal

types

2ch Linear PCM 2ch, 32-192 kHz,

Multi-ch Linear

PCM

Bitstream Dolby Digital, DTS DVD-Video, etc.

Audio signal

formats

16/20/24 bit

8ch, 32-192 kHz,

16/20/24 bit

This unit’s HDMI interface is based on the following standards:

• HDMI Version 1.2a (High-Definition Multimedia Interface Specification Version 1.2a) licensed by HDMI Licensing, LLC.

• HDCP (High-bandwidth Digital Content Protection System) licensed by Digital Content Protection, LLC.

Notes

• When CPPM copy-protected DVD audio is played back, video and audio signals may not be output depending on the type of the DVD player.

• This unit is not compatible with HDCP-incompatible HDMI or DVI components.

• You can check the potential problem about the HDMI connection (see page 38).

Compatible

HDMI

components

CD, DVD-Video, DVD-Audio, etc.

DVD-Audio, etc.

■ HDMI jack and cable plug

HDMI

HDMI cable plug

• We recommend using an HDMI cable shorter than 5 meters (16 feet) with the HDMI logo printed on it.

• Use a conversion cable (HDMI jack this unit to other DVI components.

Notes

• Do not disconnect or connect the cable or turn off the power of the HDMI components connected to the HDMI OUT jack of this unit while data is being transferred. Doing so may disrupt playback or cause noise.

• Audio signals input at input jacks other than the HDMI IN DVD or HDMI IN DTV/CBL jack of this unit cannot be digitally output at the HDMI OUT jack.

• If you turn off the power of the video monitor connected to the HDMI OUT jack via a DVI connection, this unit may fail to establish the connection to the component.

↔ DVI-D jack) to connect

14 En

Audio and video signal flow

Connections

■ Audio signal flow

OutputInput

HDMI

AUDI O

Digital output

Analog output

Notes

• 2-channel as well as multi-channel PCM, Dolby Digital and DTS signals input at the HDMI IN DVD or HDMI IN DTV/ CBL jack can be output at the HDMI OUT jack only when “SUPPORT AUDIO” is set to “Other” (see page 70).

• Audio signals input at the HDMI IN jacks are not output at the AUDIO output jacks.

■ Video signal flow

OutputInput

HDMI

COMPONENT

VIDEO

S VIDEO

VIDEO

Through

Video conversion ON (see page 73)

Notes

• When the all video signals are input at the HDMI, COMPONENT VIDEO, S VIDEO and VIDEO jacks, the priority order of the input signals is as follows:

1. HDMI

2. COMPONENT VIDEO

3. S VIDEO

4. VIDEO

• When some digital video signals are input at the HDMI IN DVD or HDMI IN DTV/CBL jack, the video conversion function does not work.

• Digital video signals input at the HDMI IN DVD or HDMI IN DTV/CBL jack cannot be output from analog video output jacks.

PREPARATION

15 En

English

Connections

Connecting video components

Connect your TV (or projector) to the HDMI OUT jack, the COMPONENT VIDEO MONITOR OUT jacks, the S VIDEO MONITOR OUT jack or the VIDEO MONITOR OUT jack of this unit.

Make sure that this unit and other components are unplugged from the AC wall outlets.

You can choose to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack of this unit. Use the “SUPPORT AUDIO” parameter in “SOUND MENU” to select the component to play back HDMI audio signals (see page 70).

Notes

• Some video monitors connected to this unit via a DVI connection fail to recognize the HDMI audio/video signals being input if they are in the standby mode. In this case, the HDMI indicator flashes irregularly.

• When you connect your TV monitor or projector via HDMI connection, the OSD does not appear. In such cases, connect the TV monitor or projector via component, S-video or video connection.

• Connect the input source components to the HDMI IN DVD or HDMI IN DTV/CBL jack to display the video images on the video monitor connected to the HDMI OUT jack.

IN1 IN2

VIDEO

AX.

/ -ROUT

(REC)

HDMI in

HDMI

VIDEO

DTV/CBL

OUT

VIDEO

DTV/CBL DVRDVD

PR PB

Component

video in

TV (or projector)

COAXIAL

DVD

MONITOR OUT

MONITOR

OUT

OUTIN

DIGITAL INPUT

RPB

OPTICAL

DTV/CBL CD

COMPONENT VIDEO

YPRPBY

DTV/CBL DVRDVD

FRONT(6CH)

SURROUND

SB(8CH)

MULTI CH INPUTAUDIO

CENTER

SUB

WOOFER

OUT S VIDEOIN

XM SIRIUS

MONITOR

ZONE 2

DTV/CBL

DVR

S VIDEO

OUT

OUTPUT

OUT

Video in

S-video in

16 En

indicates recommended connections

indicates alternative connections (One for the video connection, and one for the audio connection)

Connecting other components

Make sure that this unit and other components are unplugged from the AC wall outlets.

Notes

• When “VIDEO CONV.” is set to “OFF” (see page 73), be sure to make the same type of video connections as those made for your TV (see page 16). For example, if you connected your TV to the VIDEO MONITOR OUT jack of this unit, connect your other components to the VIDEO jacks.

■ Connecting a DVD player

DVD player

HDMI out

Connections

• When “VIDEO CONV.” is set to “ON” (see page 73), the converted video signals are output only at the MONITOR OUT jacks. To record a source, make the same type of video connections between each component.

• To make a digital connection to a component other than the default component assigned to DIGITAL INPUT jack, select the corresponding setting for “OPTICAL IN” or “COAXIAL IN” in “INPUT ASSIGNMENT” (see page 71).

• If you connect your DVD player to both the DIGITAL INPUT (OPTICAL) and the DIGITAL INPUT (COAXIAL) jacks, priority is given to the signals input at the DIGITAL INPUT (COAXIAL) jack.

S-video out

PREPARATION

Video out

DTV/CBL

DVD

IN1 IN2

DVD

IN1

HDMI

HDMI DIGITAL INPUT

REMOTE

OUT

+12V

VIDEO

15mA MAX.

TRIGGER

OUT

MD/

CD-R

(PLAY)

DTV/CBL DVRDVD

DVD DVD

OUT

(REC)

DTV/CBL DVRDVD

DVD

AUDIO

Component

video out

Audio out

Coaxial out

OUT S VIDEOIN

CENTER

SUB

WOOFER

XM SIRIUS

DTV/CBL

MONITOR

S VIDEO

OUT

ZONE 2

OUT

DVR

OUTPUT

OUT

VIDEO

COAXIAL

DVD

DIGITAL INPUT

DVD

RPB

MONITOR OUT

MONITOR

OUT

PR PB Y

OPTICAL

DTV/CBL CD

COMPONENT VIDEO

YPRPBY

DTV/CBL DVRDVD

FRONT(6CH)

SURROUND

SB(8CH)

MULTI CH INPUTAUDIO

indicates recommended connections

indicates alternative connections (One for the video connection, and one for the audio connection)

English

17 En

Connections

DTV/CBL CD

DVD

■ Connecting a DVD recorder, PVR or VCR

DTV/CBL

DVD

IN1 IN2

HDMI

REMOTE

OUT

+12V

VIDEO

15mA MAX.

TRIGGER

OUT

MD/

CD-R

(PLAY)

DTV/CBL DVRDVD

OUT

(REC)

DTV/CBL DVRDVD

AUDIO

Audio out

■ Connecting a set-top box

Satellite receiver, cable TV

receiver or HDTV decoder

DIGITAL INPUT

RPB

MONITOR OUT

OUT

COMPONENT VIDEO

FRONT(6CH)

Video in

SB(8CH)

YPRPBY

RPB

DTV/CBL DVRDVD

DVR

SURROUND

MULTI CH INPUTAUDIO

S-video out

OUT S VIDEOIN

CENTER

SUB

WOOFER

XM SIRIUS

DTV/CBL

MONITOR

OUT

ZONE 2

OUT

S-video in

DVR

OUTPUT

PR PB Y

OUT

DVD

VIDEO

MONITOR

OUT

OUTIN

DVR

OUT

DVR

Audio in

Component video out

Video out

DVD recorder, PVR or VCR

HDMI out Component video out

Video out

DTV/CBL

(PLAY)

REMOTE

OUT

+12V 15mA MAX.

TRIGGER

DVD

OUT

MD/

CD-R

IN1 IN2

(REC)

IN2

HDMI DIGITAL INPUT

HDMI

VIDEO

DTV/CBL DTV/CBL

DTV/CBL DVRDVD

OUT

DTV/CBL

DTV/CBL DVRDVD

AUDIO

Audio out

S-video out

Optical out

L R

OUT

VIDEO

COAXIAL

DVD

OUT

MONITOR OUT

MONITOR

OUT

DIGITAL INPUT

RPB

OPTICAL

DTV/CBL CD

DTV/CBL

COMPONENT VIDEO

YPRPBY

DTV/CBL DVRDVD

FRONT(6CH)

SB(8CH)

MULTI CH INPUTAUDIO

SURROUND

RPB

OUT S VIDEOIN

CENTER

SUB

WOOFER

XM SIRIUS

DTV/CBL

MONITOR

S VIDEO

OUT

ZONE 2

OUT

PR PB Y

DVR

OUTPUT

indicates recommended connections

indicates alternative connections (One for the video connection, and one for the audio connection)

18 En

Connecting audio components

Connect the audio components as follows.

■ Connecting a CD player and a CD recorder/MD recorder

Notes

• When you connect your CD player via analog and digital

connection, priority is given to the signal input at the DIGITAL INPUT jack.

• To make a digital connection to a component other than the

default component assigned to each DIGITAL INPUT jack, select the corresponding setting in “INPUT ASSIGNMENT” (see page 71).

Connections

Make sure that this unit and other components are unplugged from the AC wall outlets.

indicates recommended connections

PREPARATION

indicates alternative connections

Audio in

MD recorder

Audio out

(PLAY)

REMOTE

OUT

+12V 15mA MAX.

TRIGGER

IN1 IN2

HDMI

VIDEO

OUT

MD/

OUT

MD/

OUT

CD-R

(REC)

CD-R

(REC)

DTV/CBL

AUDIO

COAXIAL

DVD

OUTDVD

DTV/CBL DVRDVD

VIDEO

DIGITAL INPUT

DVD

MONITOR OUT

MONITOR

OUT

RPB

DVD

OPTICAL

DTV/CBL CD

COMPONENT VIDEO

DTV/CBL DV

FRONT(6CH)

SB(8CH)

MULTI CH INP

SURROUND

Audio out

Optical out

CD playerCD recorder or

■ Connecting a multi-format player or an external decoder

This unit is equipped with 6 additional input jacks (left and right FRONT, CENTER, left and right SURROUND and SUBWOOFER) for discrete multi-channel input from a multi-format player, external decoder, sound processor or preamplifier. If you set “INPUT CH” to “8ch” in “MULTI CH SET” (see page 72), you can use the input jacks assigned as “FRONT” in “MULTI CH SET” (see page 72) together with the MULTI CH INPUT jacks to input 8-channel signals. Connect the output jacks on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to match the left and right outputs to the left and right input jacks for the front and surround channels.

Notes

• When you select the component connected to the MULTI CH INPUT jacks as the input source (see page 36), this unit automatically

turns off the digital sound field processor, and you cannot select sound field programs.

• This unit does not redirect signals input at the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that

you connect at least a 5.1-channel speaker system before using this feature.

SB(8CH)

Surround out

SURROUND

MULTI CH INPUT

CENTER

WOOFER

SUB

Subwoofer out

Center out

L R LR

Front out

FRONT(6CH)

SB(8CH)

Surround out

SURROUND

MULTI CH INPUT

CENTER

WOOFER

SUB

Subwoofer out

Center out

FRONT(6CH)

Surround back out

L R LRL R

Front out

Multi-format player/External decoder (5.1-channel output)

The analog audio input jacks assigned as “FRONT” in “MULTI CH SET” (see page 72).

English

Multi-format player/External decoder (7.1-channel output)

19 En

Connections

DVD

IN1

Connecting a Yamaha iPod™ universal dock or Bluetooth

™

adapter

Make sure that this unit and other components are unplugged from the AC wall outlets.

This unit is equipped with the DOCK terminal on the rear panel that allows you to connect a Yamaha iPod universal dock (such as YDS-10, sold separately) or Bluetooth adapter (such as YBA-10, sold separately). Connect a Yamaha iPod universal dock or Bluetooth adapter to the DOCK terminal on the rear panel of this unit using its dedicated cable.

DTV/CBL Y

DOCK

ANTENNA

DVR

GND

SURROUND BA

XM SIRIUS

Yamaha iPod universal dock

or Bluetooth adapter

Using REMOTE IN/OUT jacks

When the components are the Yamaha products and have the capability of the transmission of the remote control signals, connect the REMOTE IN jack and REMOTE OUT jack to the remote control input and output jack with the monaural analog mini cable as follows.

REMOTE

OUT

+12V 15mA MAX.

Remote

control out

Infrared signal

receiver or

Yam ah a

component

• If the components have the capability of the SCENE control signals, this unit can automatically activate the corresponding components and start the playback when you use one of the SCENE buttons. Refer to the owner’s manuals for details about the capability of the SCENE control signals of the components.

• If the component connected to the REMOTE OUT jack is not the Yamaha product, set “SCENE IR” in the advanced setup menu to “OFF” (see page 83).

Remote control in

Yamah a component (CD or DVD player, etc.)

20 En

Connections

Using the VIDEO AUX jacks on the front panel

Use the VIDEO AUX jacks on the front panel to connect a game console or a video camera to this unit.

Caution

Be sure to turn down the volume of this unit and other components before making connections.

Notes

• To reproduce the source signals input at these jacks, select “V-AUX” as the input source.

• When audio signals are input at the AUDIO jacks, PORTABLE jack and the DOCK terminal on the rear panel, the priority order of the input signal is as follows:

1. DOCK

2. PORTABLE

3. AUDIO

VOLUME

ZONE

CONTROL

VIDEO AUX

VIDEO L AUDIO R

PORTABLE

SILENT CINEMA

MAIN ZONE

ON/OFF

PHONES

SYSTEM OFF

EDIT ZONE 2 ON/OFF

SPEAKERS

A/B/OFF

TONE CONTROL

SEARCH MODE PRESET/TUNING

Connecting the FM and AM antennas

Both FM and AM indoor antennas are supplied with this unit. Connect each antenna correctly to the designated terminals. In general, these antennas should provide sufficient signal strength.

See page 22 for connection information of the supplied AM loop antenna.

Notes

• The AM loop antenna should be placed away from this unit.

• The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.

• A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized Yamaha dealer or service center about outdoor antennas.

Outdoor AM antenna

Use a 5 to 10 m (16 to 33 ft) vinyl-covered wire extended outdoors from a window.

AM loop antenna (supplied)

Indoor FM antenna (supplied)

PREPARATION

VIDEO AUX

VIDEO L AUDIO R PORTABLE

Vid eo

output

Game console or

video camera

Audio output

3.5 mm stereo mini plug

Audio output

Portable audio

player

DOCK

ANTENNA

GND

UNBAL.

SUB

WOOFER

CENTE

PUT

(U.S.A. model)

Ground (GND terminal)

For maximum safety and minimum interference, connect the

GND terminal to a good earth ground. A good earth

antenna ground is a metal stake driven into moist earth.

English

21 En

Connections

Connecting the wire of the AM loop antenna

Open the lever

Insert

Close the lever

The wire of the AM loop antenna does not have any polarity and you can connect either end of the wire to AM or GND terminal.

Assembling the supplied AM loop antenna

Note

The types of the supplied AM loop antenna is different depending on the models.

Connecting the power cable

Once all connections are complete, plug the power cable into the AC wall outlet.

(U.S.A. model)

AC OUTLETS

SWITCHED

Power cable

■ AC OUTLET(S) (SWITCHED)

Australia model...................................................... 1 outlet

Korea model............................................................... None

Other models......................................................... 2 outlets

Use these outlet(s) to supply power to any connected components. Connect the power cable of your other components to these outlet(s). Power to these outlet(s) is supplied when this unit is turned on. However, power to these outlet(s) is cut off when this unit is set to the standby mode. For information on the maximum power or the total power consumption of the components that can be connected to these outlet(s), see “Specifications” on page 97.

22 En

Connections

Setting the speaker impedance

Caution

If you are to use 6 ohm speakers, set “SP IMP.” to “6Ω MIN” as follows BEFORE using this unit.

1 Press

2 Press and hold

3 Press

SYSTEM OFF on the front panel to

set this unit to the standby mode.

Refer to the right column for details.

TONE CONTROL and then press AMAIN ZONE ON/OFF to turn on this unit.

This unit turns on, and the advanced setup menu appears in the front panel display.

TONE CONTROL

IMP.”.

“SP IMP.” and the current speaker impedance setting (“8Ω MIN”) appear in the front panel display.

While holding

down

PROGRAM l / h to select “SP

MAIN ZONE

ON/OFF

Turning on and off the power

■ Turning on this unit

Press AMAIN ZONE ON/OFF (or HPOWER) to turn on this unit.

When you turn on this unit, there will be a 4 to 5-second delay before this unit can reproduce sound.

■ Set this unit to the standby mode

Press AMAIN ZONE ON/OFF (or

STANDBY) to set this unit to the standby

mode.

In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control.

You can set the main zone and zone 2 to the standby mode simultaneously by pressing CSYSTEM OFF.

PREPARATION

4 Press

5 Press

Note

The setting you made is reflected next time you turn on this unit.

STRAIGHT repeatedly to select “6Ω

MIN”.

MAIN ZONE ON/OFF to save the

new setting and turn off this unit.

English

23 En

Connections

Front panel display

Note

The XM and SIRIUS indicator is only applicable to the U.S.A. and Canada models and the cursor on the left of the XM indicator or SIRIUS indicator lights up only when “XM” or “SIRIUS” is selected as the input source.

12345678

MULTI CH

96 24

MATRIX DISCRETE

neural

PCM

DIGITAL

PL x

DVR

V-A UX

DOCK ENHANCER

SP A B

DTV/CBL

SILENT

ZONE 2

CINEMA

1 HDMI indicator

Lights up when the signal of the selected input source is input at the HDMI IN jacks (see page 14).

2 DOCK indicator

• Lights up when you station your iPod in a Yamaha iPod universal dock (such as the YDS-10, sold separately) connected to the DOCK terminal of this unit (see page 20) and V-AUX is selected as the input source. The DOCK indicator also lights up when this unit is charging the battery of the stationed iPod in the standby mode.

• Flashes while the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) and the Bluetooth component is in the paring (see page 61) or the Bluetooth adapter is searching the Bluetooth component (see page 61).

• Lights up while the connected Yamaha Bluetooth adapter is connected to the Bluetooth component (see page 20).

3 ENHANCER indicator

Lights up when the Compressed Music Enhancer mode is selected (see page 40).

4 Input source indicators

The corresponding cursor lights up to show the currently selected input source.

5 YPAO indicator

Lights up when you run “AUTO SETUP” and when the speaker settings set in “AUTO SETUP” are used without any modifications (see page 26).

DVD CD

MD/CD-R

SLEEP

YPAO VIRTUAL

TUNER SIRIUS

MEMORY

AUTO

TUNED

HOLD

STEREO

VOL.

MUTE

96/24

LFE

LL C R SL SB SR

GFECB DA09

6 Tuner indicators

Lights up when this unit is in the FM, AM, XM Satellite Radio or SIRIUS Satellite Radio tuning mode (see pages 45 to 58).

7 96/24 indicator

Lights up when a DTS 96/24 signal is input to this unit.

8 MUTE indicator and VOLUME level indicator

• The MUTE indicator flashes while the MUTE function is on (see page 37).

• Indicates the current volume level.

9 PCM indicator

Lights up when this unit is reproducing PCM (Pulse Code Modulation) digital audio signals.

0 Decoder indicators

The respective indicator lights up when any of the decoders of this unit function.

A Headphone indicator

Lights up when headphones are connected (see page 37).

B SP A B indicators

Light up according to the set of front speakers activated (see page 35). SP A: The FRONT A speakers are activated. SP B: The FRONT B speakers are activated.

C ZONE2 indicator

Lights up when Zone 2 is turned on (see page 80).

SBRSBL

24 En

Connections

D CINEMA DSP indicator

Lights up when you select a sound field program (see page 41).

VIRTUAL indicator

Lights up when Virtual CINEMA DSP is active (see page 41).

SILENT CINEMA indicator

Lights up when headphones are connected and a sound field program is selected (see page 41).

E Multi-information display

Shows the name of the current sound field program and other information when adjusting or changing settings.

F SLEEP indicator

Lights up while the sleep timer is on (see page 39).

G Input channel and speaker indicators

LFE

LFE indicator

LL C R SL SB SR

Input channel indicators

SBRSBL

Input channel indicators

• Indicate the channel components of the current digital input signal.

• Light up or flash according to the settings of the speakers when this unit is in the automatic setup procedure (see page 26) or the speaker level setting procedure in the “SP LEVEL” (see page 67).

■ Using the remote control

The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation.

Approximately

6 m (20 ft)

1Infrared window

Outputs infrared control signals. Aim this window at the component you want to operate.

To set the remote control codes for other components, see page 78.

Notes

• Do not spill water or other liquids on the remote control.

• Do not drop the remote control.

• Do not leave or store the remote control in the following types of conditions: – places of high humidity, such as near a bath – places of high temperature, such as near a heater or stove – places of extremely low temperatures – dusty places

30º 30º

PREPARATION

25 En

English

Optimizing the speaker setting for your listening room

This unit employs the YPAO (Yamaha Parametric Room Acoustic Optimizer) technology which lets you avoid troublesome listening-based speaker setup and achieves highly accurate sound adjustments automatically. The supplied optimizer microphone collects and this unit analyzes the sound your speakers produce in your actual listening environment.

Using AUTO SETUP

Notes

• Be advised that it is normal for loud test tones to be output during the “AUTO SETUP” procedure.

• To achieve the best results, make sure the room is as quiet as possible while the “AUTO SETUP” procedure is in progress. If there is too much ambient noise, the results may not be satisfactory.

You can run “AUTO SETUP” using the system menu that appears in the OSD or in the front panel display. This manual uses the OSD illustrations to explain the “AUTO SETUP” procedure.

1 Make sure of the following check points.

Note

Before starting the automatic setup, check the following check points.

❏ Speakers are connected appropriately. ❏ Headphones are disconnected from this unit. ❏ This unit and the video monitor are turned on. ❏ This unit is selected as the video input source of

the video monitor.

❏ The connected subwoofer is turned on and the

volume level is set to about half way (or slightly less).

❏ The crossover frequency controls of the

connected subwoofer is set to the maximum.

VOLUME

CROSSOVER

HIGH CUT

2 Connect the supplied optimizer microphone

to the OPTIMIZER MIC jack on the front panel.

OPTIMIZER MIC

ZONE

CONTROL

/MAN'L

VIDEO AUX

AUDIO SELECT

VIDEO L AUDIO R PORTABLE

Optimizer microphone

The following display appears in the OSD.

AUTO SETUP

SETUP;;;;;;;AUTO

. START

Automatic Processing of all item

[ ]/[ ]:Up/Down

[ ]/[ ]:Select

[

3 Place the optimizer microphone at your

normal listening position on a flat level surface with the microphone heading upward.

Optimizer microphone

MIN

MAX

Controls of a subwoofer (example)

MIN MAX

❏ FRONT A speakers are selected as the front

speaker system (see page 35).

❏ The room is sufficiently quiet.

26 En

It is recommended that you use a tripod (etc.) to affix the optimizer microphone at the same height as your ears would be when you are seated in your listening position. You can use the attached screw of a tripod (etc.) to fix the optimizer microphone to the tripod (etc.).

+ 84 hidden pages