The following accessories are supplied with this product.
English
for Canada
PU
SH
Remote control
Batteries (2)
(AAA, R03, UM-4)
Preparing the remote control
1
3
2
Items necessary for connection
■
Take off the battery compartment cover.
1
Insert the two supplied AAA batteries
2
into the battery case, following the
polarity markings.
Snap the battery compartment cover
3
back into place.
Speakers
AM loop antenna
Indoor FM antennaVIDEO AUX input cover
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
YPAO microphone
within 6 m
Ex.Ex.
Front speaker
• Use speakers with an impedance of at least 6Ω. 4Ω speakers can also be used as the front speakers. For more information on speaker
impedance, refer to page 3.
• If you are using a CRT monitor, we recommend that you use magnetically shielded speakers.
• Prepare at least two front speakers. The priority of the other speakers is as follows:
1 Two surround speakers
2 One center speaker
3 One (or two) surround back speaker (s)/presence speakers
Center speaker
External components
TV
Playback device such as
BD (Blu-ray Disc)/DVD players
Ex.Ex.
Surround speaker, surround back
speaker, and presence speaker
Cable
• Cables for connecting external components
(may differ depending on the components you are connecting)
• Speaker cables
(a quantity to match the number of speakers you are connecting)
• Audio pin cable
(for subwoofer)
- 1 -
Active subwoofer
Page 2
Connect and install as follows the rst time you use this unit.
1
2
3
4
5
1
1
2
3
4
See the following explanations for the connections for each number.
2
4
TV
This unit
3
BD/DVD player
(recorder)
Front
speaker L
Center speaker
1
1
Connect the speakers
Surround
speaker L
Front
speaker R
Subwoofer
Surround back
speaker L
1
6.1
Surround back
speaker
7.1
Surround
speaker R
7.1
Surround back
speaker R
7.1
Connect when using with 7.1-channel speaker
layout. Place the surround back speakers
(L/R) 30 cm or more away from each other.
6.1
Connect when using with 6.1-channel speaker
layout. Place the surround back speaker
behind the listening position.
2
Connect a TV
3
Connect playback device such as BD/DVD players and recorders
4
Connect the AC power cable
5
Set up the speaker parameters automatically (YPAO)
- 2 -
Page 3
I
C
HIN
PUT
35SUO
O
SUC
O
U
0
C
O
T
E
U
O
O
UOO
U
SUOUSUC
O
U
O
O
CSG
1
2
4
1
Connect the speakers
Front speaker
R L
CENTER
SUBWOOFER
HDMI 4HDMI 5
CENTER
FRONT
AUDIO
ZONE2
OUT
OUT
HDMI 2HDMI 3
OTE
+12V
0.1A MAX.
ER OUT
SUR.BACK
D
I
C
H
I
N
P
U
T
Connecting speakers
7.1
Surround
speaker
R L
Surround back
speaker
R L
Connect when using with 7.1-channel speaker layout.
6.1
Connect when using with 6.1-channel speaker layout.
7.17.1
6.1
Caution:
• Remove the AC power cable of this unit from the power outlet
before connecting the speakers.
• Generally speaker cables consist of two parallel insulated
cables. One of these cables is a different color, or has a line
running along it, to indicate different polarity. Insert the different
SPEAKERS
colored (or lined) cable into the “+” (positive, red) terminal
on this unit and the speakers, and the other cable into the “-”
(minus, black) terminal.
SINGLE
• Be careful that the core of the speaker cable does not touch
anything or come into contact with the metal areas of this unit.
This may damage this unit or the speakers. If the speaker cables
short circuit, “CHECK SP WIRES!” will appear on the front panel
SURROUND
SURROUND
CENTERSINGLE
BACK/
BI-AMP
display when this unit is switched on.
• This unit is con gured for 8Ω speakers at the factory setting.
When connecting 6Ω speakers, con gure the speaker impedance
setting of this unit to 6Ω. When this unit is con gured for 6Ω
SURROUND
SUR.BACK
PRE OUT
SUBWOOFER12
FRONT
speakers, 4Ω speakers can also be used as the front speakers.
For more information on setting the speaker impedance, refer to
“Changing speaker impedance” in the Owner’s Manual.
• When connecting the presence speakers, refer to “Presence speaker
connection” in the Owner’s Manual.
• This unit can connect speakers that support Bi-amp connection for front
speakers. Refer to “Bi-amp connection” in the Owner’s Manual for the
SubwooferCenter speaker
details.
3
2
1
4
F
R
O
N
T
Remove approximately 10 mm of insulation from
1
the ends of the speaker cables, and twist the bare
wires of the cables together rmly so that they will
not cause short circuits.
Loosen the speaker terminals.
2
Insert the bare wire of the speaker cable into the
3
gap on the side of the terminal.
Tighten the terminal.
4
Connecting the subwoofer
Connect the subwoofer input jack to the SUBWOOFER
1
1 or 2 jack on this unit with an audio pin cable.
S
U
R
R
O
U
N
D
B
B
I
A
-
A
C
MP
K
/
Connecting the banana plug
Tighten the knob, and then insert the banana plug
into the end of the terminal.
Banana plug
F
R
ON
T
Set the subwoofer volume as follows.
2
Volume: Set to approximately half volume (or slightly less than half).
Crossover frequency (if available): Set to maximum.
CROSSOVER/
VOLUME
HIGH CUT
MINMAX
MINMAX
Subwoofer examples
- 3 -
Page 4
N
H
A
O
C
O
C
(
)
A
V3A
V1AV2AV4A
V5A
V
6
AUD
IO1
AUD
I
O
2
M
U
L
T
I
C
H
I
N
C
O
(C)
C
O
O
C
O
(/)
COO
VID
E
O
O
U
T
SUSUOUGGO
U
0
.1AMA
O
O
O
U
G
5
2
T
O
C
OIC
A
V3A
V1A
V2A
V
5
C
O
(
C
D
)
C
O
O
COO
O
O
U
C
2
Connect a TV
If your TV has multiple inputs, connect with the following priority (A to C).
ARC
DOCK
P
P
COMPONENT
VIDEO
R
B
Y
OPTICAL
AV
HDMI
OUT
HDMI
ANTENNA
FM
GND
AM
P
R
75
P
VIDEO
COAXIAL
COAXIAL
OPTICAL
(CD)
(
)
TV
AV
AV
AV
AV
3
2
1
5
4
B
Y
AV
OUT
AUDIO
AV
6
COMPONENT
P
R
P
B
Y
1
VIDEO
MONITOR OUT
AUDIO
2
FRONT
VIDEO
(
BD/DVD
HDMI 1
)
REMOTE
IN
OUT
TRIGGER OUT
M
ULTI C
+12V
V
0.1A M
SUSURROUND
H
I
Video input to this unit is output to a TV using output jacks of the
same kind.
When connecting to an HDMI compatible TV
Video signal such as component video and video received by this unit
is converted to HDMI and output to the TV. Just select HDMI input on
the TV to view video from any external source connected to this unit.
You can change the resolution and aspect ratio used when converting
to HDMI to suit your requirements.
InputOutput
HDMI
COMPONENT
VIDEO
HDMI
COMPONENT
VIDEO
TV
HDMI input
Component
video input
VIDEO
VIDEO
Video input
Through
Converted
HDMI
P
P
V
When connecting to a non-HDMI compatible TV
Connect to the TV using the same type of connection that you used to
connect to the playback device, and change the inputs on your TV to
match that of the playback device you are using for playback.
If the playback device and TV are equipped with different types
of analog video jacks, this unit will convert the video signal to
component video signal, or vice-versa, according to the type of video
input jacks used by the TV. For more information on video signal
conversion, refer to “Connecting a TV monitor” in the Owner’s Manual.
A When using an HDMI
HDMI
compatible TV.
COMPONENT
VIDEO
R
B
B When using a component
Y
video input-compatible TV.
VIDEO
VIDEO
C
When using a TV compatible
with video input only.
InputOutput
COMPONENT
VIDEO
VIDEO
Through
Converted
COMPONENT
VIDEO
VIDEO
TV
Component
video input
Video input
Listening to TV audio
To playback TV audio on this unit, connect the TV audio output to this unit.
Connect the following input jacks, matching the audio output jacks on your TV.
When viewing your TV, select the appropriate input source on this unit.
OPTICAL
Audio
output
O
DOCK
COMPONENT
P
R
P
B
Y
VIDEO
COAXIAL
OPTICAL
A
A
V 1
Audio output from TVInput jack on this unit
Optical digital outputAV1 or AV4
Coaxial digital outputAV2 or AV3
Analog output
HDMI Audio Return Channel
(Described in the right column)
One of AV5, AV6, AUDIO1, AUDIO2,
and VIDEO-AUX
HDMI OUT
✽ Connecting to AV4 allows you to playback TV audio just by pressing the
TV under SCENE key.
ARC
OU
HDMI
VIDEO
O
COAXIAL
OPTICAL
(CD)
(
)
TV
A
A
A
V 5
V 4
V 3
V 2
When using an HDMI compatible TV that supports
Audio Return Channel functions and / or HDMI Control functions
(e.g., Panasonic VIERA Link), you can enjoy the TV sound on this
unit as follows:
When using a TV that supports the Audio Return Channel
function and HDMI Control function
The audio / video output from the unit to the TV and audio output
from the TV to the unit are possible using a single HDMI cable.
The input source is switched automatically to match operations
carried out on the TV, and that makes TV sound control easier to
use.
For the connections and settings, refer to “Using the HDMI Control
function” in the Owner’s Manual.
When using a TV that supports HDMI Control functions
When HDMI Control functions are enabled on the unit, input source
can be switched automatically to match operations carried out on
the TV.
For the connections and settings, refer to “Using the HDMI Control
function” in the Owner’s Manual.
- 4 -
Page 5
U
D
O
C
K
(
)
A
V3A
V4A
V
6AU
D
IO1
A
U
D
I
O
2
MUL
T
I
C
HIN
P
U
T
(C)
COO
C
O
O
U
O
U
S
U
SUCSUOUGGOU
+12
V
0
O
C
O
O
U
T
COO
O
O
OOO
U
G
5
P
R
P
B
Y
O
S
O
/
S
C
SUC
O
U
SUO
O
C
ENTERSI
NGL
E
S
S
S
U
R
R
O
U
NDB
ACK/BIAMP
S
G
3
4
3
Connect playback device such as BD/DVD players and recorders
If your playback device has multiple audio/video outputs, connect with the following priority
(A to D) to enjoy a higher quality sounds and images.
A When playback device is capable
of HDMI output
B When playback device is capable
of component video output (with
optical digital audio output)
C When playback device is capable
of component video output (with
coaxial digital audio output)
D When playback device is capable
of video output (with analog audio
output) only
HDMI
COMPONENT
VIDEO
OPTICAL
COMPONENT
VIDEO
COAXIAL
VIDEO
AUDIO
HDMI
P
P
P
P
C
V
HDMI
R
B
Y
O
R
B
Y
DOCK
COMPONENT
VIDEO
P
R
P
R
P
B
P
B
Y
Y
O
COAXIAL
OPTICAL
A
A
V
V
1
2
VIDEO
COAXIAL
ARC
OUT
HDMI
ANTENNA
FM
GND
P
R
P
B
Y
AM
75
V
COMPONENT
VIDEO
P
R
P
B
Y
MONITOR OUT
VIDEO
(
BD/DVD
)
HDMI 2
HDMI 1
REMOTE
IN
OUT
+12V
0.1A MAX.
TRIGGER OUT
L
OPTICAL
(CD)
A
V
3
R
(
)
TV
A
V
4
AV
OUT
A
A
UD
A
V
5
UD
A
V
6
I
I
O 2
O 1
FRONT
SURROUND
M
SUR.BACK
U
LT
I
CH I
N
C
L
R
D
S
PU
T
• When playback, select the corresponding input source to which the jack is connected.
• At the default settings, input sources and sound programs are preset on the SCENE keys. When a playback device is connected to HDMI 1,
pressing BD/DVD under SCENE key selects the HDMI 1 input. When a playback device is connected to AV3, pressing CD under SCENE selects
the AV3 input. The input source and sound program preset on the SCENE key can be changed. For more information on the SCENE function,
refer to “Changing input settings with a single key (SCENE function)” in the Owner’s Manual.
• If necessary, you can connect components that cannot be connected using the above methods, such as devices that output video from
component video output jacks and audio from analog output jacks. Refer to “Connecting external components” in the Owner’s Manual for
details.
4
Connect the AC power cable
SPEAKERS
SINGLE
EXTRA SP
ZONE2/PRESENCE
SURROUND
BACK/
BI-AMP
CENTERSINGLE
SUR.BACK
SUBWOOFER12
PRE OUT
To the power outlet
AC power cable
- 5 -
Page 6
5
5
Set up the speaker parameters automatically (YPAO)
When all connections are complete, adjust the con guration, sizes, and volume
balance of the speakers to provide an optimal sound eld. This unit is equipped with a
Yamaha Parametric Room Acoustic Optimizer (YPAO) function that adjusts the speaker
balance automatically with a simple procedure.
When using YPAO, a test tone will be output from the speakers for approximately 3 minutes to measure acoustics. Be aware of the following when
using YPAO.
• The test tone is output at high volume. Refrain from using this function at night when it may be a nuisance to others.
• Take care that the test tone does not frighten small children.
YPAO operations can be viewed on the front panel display or TV screen. TV display is used here to explain operation.
Check the following before using YPAO.
1
This unit
• The headphones are removed.
TV
• This unit is connected to the TV correctly.
• The power is turned on.
• The video input to which the video output
from this unit has been selected.
Subwoofer
• The power is turned on.
• Volume is set to approximately half, and the
cross-over frequency (if present) is set to
maximum.
VOLUME
MINMAX
Subwoofer examples
CROSSOVER/
HIGH CUT
MINMAX
Place the supplied YPAO microphone at ear height in your listening
2
position.
When positioning the microphone, we recommend that you use equipment that allows you to
adjust the height (such as a tripod) as a microphone stand. When using a tripod, use the tripod
screws to x the microphone in place.
Press RECEIVER A on the remote control to switch this unit on.
3
Connect the YPAO microphone to the YPAO MIC jack on the front panel.
4
“Mic On. View ON SCREEN” appears on
MAIN ZONE
YPAO MIC
ZONE2 ZONE CONTROL
YPAO microphone
the front panel display, and then the display
at right appears on the TV screen.
YPAO microphone
This completes preparation. To achieve more accurate results, take note of the following when measuring acoustics.
• It takes approximately 3 minutes to accurately measure acoustics. Keep the room as quiet as possible while acoustics are measured.
• Wait in a corner of the room, or leave it entirely, while acoustics are measured to avoid creating an obstruction between the speakers and
the YPAO microphone.
Continues to
the next page
- 6 -
Page 7
SCU
O
U
CSUCO
SGSUCOUSCCO
MUT
E
856
900
1
234
C
TVVOLTVCH
OUO
U
USSOUCO
C
COS
U
U
O
PTION
O
OYSDO
CKUUO
3
5
U
5
3
6
[
]
U
U
G
Use the cursor B/C to select the “Measure” and
5
press ENTER to start measurement.
The following display appears if measurement nishes without any problems.
Result
Displays the results of automatic acoustics measurement and sets
the equalizer (parametric equalizer) to provide a uni ed sound
eld. For details, refer to “Reviewing and reloading the automatic
setup parameters” in the Owner’s Manual.
Save/Exit
Applies the result to the speaker setup and nishes the automatic
measurement.
Note
If a problem occurs, an error message or report is displayed either during or after acoustic
measurement. Refer to “When an error message is displayed during measurement,” or “When a
warning message is displayed after measurement” in the Owner’s Manual to resolve the problem
and measure acoustics with YPAO again.
Use the cursor B/C to select “Save/Exit” and press ENTER.
6
Use the cursor D/E to select “SAVE” and press ENTER.
7
When the display at left appears, the YPAO setup is complete.
MAIN
ZONE 2
RECEIVER
SOURCE
HDMI
1234
1234
5
TUNER
FM
INFO
MOVIEMUSIC
BDDVD
ON SCREEN
RETURN
TOP
MENU
REC
1234
90
INPUT
MUTE
V-AUX
AV
6
AM
MEMORY
SCENE
TV
ENTER
TV
TV VOLTV CH
AUDIO
125
MULTI
[ A ]
PRESET
ENHANCER
STRAIGHTSLEEPPURE DIRECT
CD
OPTION
DISPLAY
POP-UP
MENU
7856
10
CODE SET
DOCK
TUNING
SUR. DECODE
RADIO
VOLUME
MUTE
ENT
RECEIVER A
ON SCREEN
ENTER, Cursor
Press ENTER.
8
YPAO is automatically terminated. Disconnect the YPAO
microphone.
You can use the following functions with this unit. For details on the
operations, refer to the Owner’s Manual on the supplied CD-ROM.
Adjustment for various parameters to match your listening environment
- Sound quality control with a parametric equalizer <PEQ Select>
- Easy listening at low volumes <Adaptive DRC>
- Adjusting volume between input sources <Volume Trim>
External device connection and playback
- Connections and playback from BD/DVD players (recorders), TV audio, and other devices
- Playback from an iPod/iPhone
- Playback from a Bluetooth device
FM/AM tuner
- Manual preset tuning
MAIN ZONE
YPAO MIC
ZONE2 ZONE CONTROL
etc.
- 7 -
Page 8
Operation guide
ABC
MAIN ZONE
YPAO MIC
PHONES
SILENT
CINEMA
ZONE2 ZONE CONTROL
INPUT
MEMORY
INFO
PRESET
SCENE
BD
TV
DVD
TONE
CONTROL
CD
PROGRAM
G
A
Switches this unit between on and standby mode
This unit switches between on and standby mode every time you press this key.
B
Choose an input source to listen to
The name of the selected input source appears on the front panel display.
HDMI1
C
Switches between input settings
You can switch input sources and sound eld programs with a single key.