Yamaha FX10A, FX10RTRSA, FX10XTA, FX10M53SA, FX10M62SA User Manual

OWNER’S MANUAL MANUEL DU PROPRIÉTAIRE USO E MANUTENZIONE INSTRUKTIONSBOK OMISTAJAN KÄSIKIRJA EIERHÅNDBOK

E Read this manual carefully before operating this vehicle.

F Il convient de lire attentivement ce manuel avant la première utilisation du véhicule.

I	Leggere attentamente questo manuale prima di utilizzare questo veicolo.
S	Läs den här instruktionsboken noga innan snöskotern används.
SF	Lue tämä käsikirja huolellisesti ennen moottorikelkan käyttöä.
N	Les denne håndboken nøye før du tar kjøretøyet i bruk.

FX10A

FX10RTRSA

FX10XTA

FX10M53SA

FX10M62SA

8HK-28199-S2

	PRINTED ON RECYCLED PAPER
	IMPRIMÉ SUR PAPIER RECYCLÉ
	STAMPATO SU CARTA RICICLATA
YAMAHA MOTOR CO., LTD.	TRYCKT PÅ ÅTERVUNNET PAPPER
PRINTED IN JAPAN	PAINETTU UUSIOPAPERILLE
2010.05-0.3×1 CR	TRYKKET PÅ RESIRKULERT PAPIR

OWNER’S MANUAL

Read this manual carefully before operating this vehicle.

FX10A

FX10RTRSA

FX10XTA

FX10M53SA

FX10M62SA

8HK-28199-S2-E0

ESU13164

Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.

EC Declaration of Conformity

conforming to Directive 2006/42/EC

We,YAMAHA MOTOR CO., LTD. 2500 Shingai, Iwata, Japan,

declare in sole responsibility, that the product

RFX10RSS (FX10RTRS) (JYE8HK00 BA002009- )

RFX10ST2 (FX10XT) (JYE8HL00 BA010635- )

RFX10RMS (FX10M62S) (JYE8HR00 BA002752- )

(Make, model)

to which this declaration applies, conforms to the essential health and safety requirements of Directive 2006/42/EC

(If applicable)

and to the other relevant Directives of EEC 2004/108/EC

(Title and/or number and date of issue of the other Directives of EEC)

(If applicable)

To effect correct application of the essential health and safety requirements stated in the Directives of EEC, the following-standards and/or technical specifications were consulted:

– – – – – –

(Title and/or number and date of issue of standards and/or specifications)

Authorized Representative

YAMAHA MOTOR EUROPE N.V.

Koolhovenlaan 101, 1119 NC Schiphol-Rijk, The Netherlands

Signature

Shinya Shimada

General Manager

RV Engineering Division

MC Operations

Date of Issue 17 December, 2009

Introduction

ESU10131

Congratulations on your purchase of a Yamaha snowmobile. This model is the result of Yamaha’s vast experience in the production of fine sporting and touring snowmobiles. It represents the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields.

This manual will give you an understanding of the operation, inspection, and basic maintenance of this snowmobile. If you have any questions concerning the operation or maintenance of your snowmobile, please consult a Yamaha dealer.

Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most current product information available at the time of printing, there may be minor discrepancies between your snowmobile and this manual. If there is any question concerning this manual, please consult a Yamaha dealer.

EWS00670

WARNING

Please read this manual carefully before operating this snowmobile. Do not attempt to operate this snowmobile until you have attained adequate knowledge of its controls and operating features.

Regular inspections and careful maintenance, along with good operating techniques, will help ensure that you safely enjoy the capabilities and reliability of this snowmobile.

FX10A

FX10RTRSA

FX10XTA

FX10M53SA

FX10M62SA

Any reprinting or unauthorized use without the written permission of Yamaha Motor Co., Ltd.

is expressly prohibited. Printed in Japan.

Important manual information

ESU10151

Particularly important information is distinguished in this manual by the following notations.

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

EWS00021

WARNING

A WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

ECS00011

NOTICE

A NOTICE indicates special precautions that must be taken to avoid damage to the snowmobile or other property.

TIP

A TIP provides key information to make procedures easier or clearer.

Location of the important labels .....	1
Safety information ..........................	16
Description ......................................	18
Control functions ............................	20
Main switch ..................................	20
Throttle lever ................................	20
Throttle override system
(T.O.R.S.) ..................................	20
Multi-function meter unit ...............	21
High beam indicator light ..............	22
Low coolant temperature indicator
light ............................................	22
Fuel meter and grip/thumb warmer
level indicator ............................	22
Fuel level warning indicator ..........	23
Oil level warning indicator ............	24
Coolant temperature warning
indicator .....................................	24
Self-diagnosis device ...................	24
Engine stop switch .......................	25
Headlight beam switch
“LIGHTS” ...................................	25
Grip/thumb warmer adjusting
switch ........................................	25
Auxiliary DC jack
(FX10M53S/FX10M62S) ...........	26
Brake lever ...................................	26
Parking brake lever ......................	27
Shift lever .....................................	27
Drive guard ...................................	28
Storage pouch ..............................	29
Fuel ..............................................	30
Suspension ..................................	31
Pre-operation checks......................	46
Pre-operation check list ................	46
Operation .........................................	48
Starting the engine .......................	48

Break-in ........................................	49
Riding your snowmobile ...............	49
Maximizing drive track life ............	53
Strap (FX10M53S/FX10M62S) ....	54
Driving ..........................................	54
Stopping the engine .....................	55
Transporting .................................	56
Periodic maintenance and
adjustment.......................................	57
Periodic maintenance chart for
the emission control system ..... 57
General maintenance and
lubrication chart ........................	59
Tool kit .........................................	61
Removing and installing
the shroud and covers ..............	61
Checking the spark plugs .............	62
Adjusting the throttle lever free
play ...........................................	63
Checking the throttle override
system (T.O.R.S.) .....................	64
Checking the air filter ...................	65
High-altitude settings ...................	67
Valve clearance ...........................	67
Engine oil and oil filter cartridge ...	67
Cooling system ............................	72
V-belt ............................................	74
Drive chain housing .....................	77
Brake and parking brake ..............	78
Extrovert drive sprocket
(FX10RTRS/FX10M53S/
FX10M62S) ...............................	80
Skis and ski runners .....................	80
Steering system ...........................	81
Drive track and slide runners .......	82
High-profile pattern drive track .....	85
Lubrication ...................................	85
Replacing a headlight bulb ...........	86
Adjusting the headlight beams .....	87
Fittings and fasteners ...................	87
Battery ..........................................	87

Contents

Replacing a fuse ..........................	88
Troubleshooting .............................	90
Storage ............................................	93
Specifications .................................	95
Consumer information....................	98
Identification number records .......	98
Vehicle Emission Control
Information label (CANADA) .....	99
WARRANTY..................................	99

Location of the important labels

ESU12678

Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of your vehicle. Never remove any labels from your vehicle. If a label becomes difficult to read or comes off, a replacement label is available from your Yamaha dealer.

For CANADA

6 7

		8
5		9
4		9
4
3
	2	1
10	11	12

Location of the important labels

1 FX10M53S/FX10M62S

4 FX10/FX10XT

TUNE-UP SPECIFICATIONS

DRIVE

1. CHAIN CASE OIL Q’TY		200 cm³ (6.8 oz)
2. CHAIN CASE OIL TYPE		GL-3 75W or 80W

3. TRACK TENSION

25 ~ 30 mm (0.98 ~ 1.18 in)/100 N (10 kg, 22 lb)

*FOR MORE INFO: SEE SERVICE MANUAL FOR THIS MODEL.

*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

SPECIFICATIONS DE LA MISE AU POINT

ENTRAÎNEMENT

1. CAPACITÉ D’HUILE DU CARTER DE CHAÎNE

200 cm³

2. TYPE D’HUILE DU CARTER DE CHAÎNE

GL-3 75W or 80W

3. FLÈCHE DE LA CHENILLE	25 ~ 30 mm/100 N (10 kg)

*POUR PLUS DE DÉTAIL: VOIR LE MANUEL D’ATELIER POUR CE MODÈLE.

*LES CARACTÉRISTIQUE TECHNIQUES SONT SUSCEPTIBLES DE CHANGER SANS NOTIFICATION

PRÉALABLE.

8GL-47578-00

4 FX10RTRS

TUNE-UP SPECIFICATIONS

DRIVE

1. CHAIN CASE OIL Q’TY		200 cm³ (6.8 oz)
2. CHAIN CASE OIL TYPE		GL-3 75W or 80W

3. TRACK TENSION

30 ~ 35 mm (1.18 ~ 1.38 in)/100 N (10 kg, 22 lb)

*FOR MORE INFO: SEE SERVICE MANUAL FOR THIS MODEL.

*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

SPECIFICATIONS DE LA MISE AU POINT

ENTRAÎNEMENT

1. CAPACITÉ D’HUILE DU CARTER DE CHAÎNE

200 cm³

2. TYPE D’HUILE DU CARTER DE CHAÎNE

GL-3 75W or 80W

3. FLÈCHE DE LA CHENILLE

30 ~ 35 mm/100 N (10 kg)

*POUR PLUS DE DÉTAIL: VOIR LE MANUEL D’ATELIER POUR CE MODÈLE.

*LES CARACTÉRISTIQUE TECHNIQUES SONT SUSCEPTIBLES DE CHANGER SANS NOTIFICATION

PRÉALABLE.

8HA-47578-00

4 FX10M53S/FX10M62S

TUNE-UP SPECIFICATIONS

DRIVE

1. CHAIN CASE OIL Q’TY		200 cm³ (6.8 oz)
2. CHAIN CASE OIL TYPE		GL-3 75W or 80W

3. TRACK TENSION

40 ~ 45 mm (1.57 ~ 1.77 in)/100 N (10 kg, 22 lb)

*FOR MORE INFO: SEE SERVICE MANUAL FOR THIS MODEL.

*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

SPECIFICATIONS DE LA MISE AU POINT

ENTRAÎNEMENT

1. CAPACITÉ D’HUILE DU CARTER DE CHAÎNE

200 cm³

2. TYPE D’HUILE DU CARTER DE CHAÎNE

GL-3 75W or 80W

3. FLÈCHE DE LA CHENILLE

40 ~ 45 mm/100 N (10 kg)

*POUR PLUS DE DÉTAIL: VOIR LE MANUEL D’ATELIER POUR CE MODÈLE.

*LES CARACTÉRISTIQUE TECHNIQUES SONT SUSCEPTIBLES DE CHANGER SANS NOTIFICATION

PRÉALABLE.

8HR-47578-00

8HR-2815M-E0

Location of the important labels

TUNE-UP SPECIFICATIONS		SPECIFICATIONS DE LA MISE AU POINT 8GL
ENGINE		MOTEUR
1.SPARK PLUG	CR9E(NGK)	1.TYPE DE BOUGIE		CR9E(NGK)
2.SPARK PLUG GAP	0.7 ~ 0.8 mm (0.028 ~ 0.031 in)	2.ECARTEMENT DES ÉLECTRODES		0.7 ~ 0.8 mm
3.IDLE SPEED		3.RÉGIME DE RALENTI
3.IDLE SPEED	1500 ± 50 r/min	3.RÉGIME DE RALENTI	1500 ± 50 r/min
6		7		8GL-1417E-00
6		7
ATTENTION		NOTICE
	8ET-2815K-10			8ET-2815K-00
8 FX10M53S/FX10M62S
NOTICE	ATTENTION

This snowmobile is originally equipped with a 57mm (2.25in.) high-profile pattern track for deep snow riding conditions.

Operation on light snowfall, ice, hard-packed snow, dirt, etc., will result in rapid wear or damage to track and slide runners.

Cette motoneige est équipée d’une chenille

à relief de 57 mm (2,25 po) pour la neige profonde. La conduite sur de la neige peu profonde,

de la glace, de la neige tassée, de la saleté, etc. provoquera une usure rapide ou l’endommagement de la chenille et des patins.

8GL-77763-E1

10 FX10XT/FX10M53S/FX10M62S

88C-77769-00

Location of the important labels

				NA
			A D
		C			A
	S	•				•
S		•				N
						S
							V
V				506			A
C				506			C
M
•							•
	T					R	T
		R				R
					O
			ANSP

This spark ignition system meets all requirements of the Canadian Interference Causing Equipment Regulations.

Ce système d’allumage par étincelle de véhicule respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

3JK-82377-10

FX10RTRS

WARNING

This unit contains high pressure nitrogen gas. Mishandling can cause explosion.

•Read owner’s manual for instructions.

•Do not incinerate, puncture or open.

AVERTISSEMENT

Cette unité contient de I’azote à haute pression.

Une mauvaise manipulation peut entraîner d’explosion.

• Voir le manuel d’utilisateur pour les instructions.

• Ne pas brûler ni perforer ni ouvrir.

8GT-F2259-50

FX10M53S/FX10M62S

WARNING

This unit contains high pressure nitrogen gas. Mishandling can cause explosion.

•Read owner’s manual for instructions.

•Do not incinerate, puncture or open.

AVERTISSEMENT

Cette unité contient de I’azote à haute pression.

Une mauvaise manipulation peut entraîner d’explosion.

• Voir le manuel d’utilisateur pour les instructions.

• Ne pas brûler ni perforer ni ouvrir.

8HR-22259-00

	•Nepasbrûlerniperforerni.ouvrir
	•Voirlemanueldutilisateurpourles.instructions
	Unemauvaisemanipulationpeut’entraînerd.explosion
	CetteunitcontientàdeIazotehaute.pression	’

	AVERTISSEMENT

WARNING

This unit contains high pressure nitrogen gas.

Mishandling can cause explosion.

•Read owner’s manual for instructions.

•Do not incinerate, puncture or open.

8HR-F2259-10

WARNING

This unit contains high pressure nitrogen gas.

Mishandling can cause explosion.

•Read owner’s manual for instructions.

•Do not incinerate, puncture or open.

•Nepasbrûlerniperforerni.ouvrir •Voirlemanueldutilisateurpourles.instructions Unemauvaisemanipulationpeutentraînerune.explosion CetteunitcontientdeI’azotesoushaute.pression

AVERTISSEMENT 8HR-22259-40

FX10/FX10XT

13,14

’

Location of the important labels

For EUROPE

		6
5		7
4		7
4
3
	2	1
8	9	10

Location of the important labels

1 FX10M62S

4 FX10RTRS

TUNE-UP SPECIFICATIONS

DRIVE

1. CHAIN CASE OIL Q’TY		200 cm³ (6.8 oz)
2. CHAIN CASE OIL TYPE		GL-3 75W or 80W

3. TRACK TENSION

30 ~ 35 mm (1.18 ~ 1.38 in)/100 N (10 kg, 22 lb)

*FOR MORE INFO: SEE SERVICE MANUAL FOR THIS MODEL.

*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

SPECIFICATIONS DE LA MISE AU POINT

ENTRAÎNEMENT

1. CAPACITÉ D’HUILE DU CARTER DE CHAÎNE

200 cm³

2. TYPE D’HUILE DU CARTER DE CHAÎNE

GL-3 75W or 80W

3. FLÈCHE DE LA CHENILLE

30 ~ 35 mm/100 N (10 kg)

*POUR PLUS DE DÉTAIL: VOIR LE MANUEL D’ATELIER POUR CE MODÈLE.

*LES CARACTÉRISTIQUE TECHNIQUES SONT SUSCEPTIBLES DE CHANGER SANS NOTIFICATION

PRÉALABLE.

8HA-47578-00

4 FX10XT

TUNE-UP SPECIFICATIONS

DRIVE

1. CHAIN CASE OIL Q’TY		200 cm³ (6.8 oz)
2. CHAIN CASE OIL TYPE		GL-3 75W or 80W

3. TRACK TENSION

25 ~ 30 mm (0.98 ~ 1.18 in)/100 N (10 kg, 22 lb)

*FOR MORE INFO: SEE SERVICE MANUAL FOR THIS MODEL.

*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

SPECIFICATIONS DE LA MISE AU POINT

ENTRAÎNEMENT

1. CAPACITÉ D’HUILE DU CARTER DE CHAÎNE

200 cm³

2. TYPE D’HUILE DU CARTER DE CHAÎNE

GL-3 75W or 80W

3. FLÈCHE DE LA CHENILLE	25 ~ 30 mm/100 N (10 kg)

*POUR PLUS DE DÉTAIL: VOIR LE MANUEL D’ATELIER POUR CE MODÈLE.

*LES CARACTÉRISTIQUE TECHNIQUES SONT SUSCEPTIBLES DE CHANGER SANS NOTIFICATION

PRÉALABLE.

8GL-47578-00

4 FX10M62S

TUNE-UP SPECIFICATIONS

DRIVE

1. CHAIN CASE OIL Q’TY		200 cm³ (6.8 oz)
2. CHAIN CASE OIL TYPE		GL-3 75W or 80W

3. TRACK TENSION

40 ~ 45 mm (1.57 ~ 1.77 in)/100 N (10 kg, 22 lb)

*FOR MORE INFO: SEE SERVICE MANUAL FOR THIS MODEL.

*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

SPECIFICATIONS DE LA MISE AU POINT

ENTRAÎNEMENT

1. CAPACITÉ D’HUILE DU CARTER DE CHAÎNE

200 cm³

2. TYPE D’HUILE DU CARTER DE CHAÎNE

GL-3 75W or 80W

3. FLÈCHE DE LA CHENILLE	40 ~ 45 mm/100 N (10 kg)

*POUR PLUS DE DÉTAIL: VOIR LE MANUEL D’ATELIER POUR CE MODÈLE.

*LES CARACTÉRISTIQUE TECHNIQUES SONT SUSCEPTIBLES DE CHANGER SANS NOTIFICATION

PRÉALABLE.

8HR-47578-00

Location of the important labels

TUNE-UP SPECIFICATIONS

ENGINE

1.SPARK PLUG	CR9E(NGK)
2.SPARK PLUG GAP	0.7 ~ 0.8 mm (0.028 ~ 0.031 in)
3.IDLE SPEED	1500 ± 50 r/min

SPECIFICATIONS DE LA MISE AU POINT 8GL MOTEUR

1.TYPE DE BOUGIE		CR9E(NGK)
2.ECARTEMENT DES ÉLECTRODES		0.7 ~ 0.8 mm
3.RÉGIME DE RALENTI	1500 ± 50 r/min
		8GL-1417E-00

6 FX10M62S
VIKTIGT	MUISTA

8HR-2815M-S0

8GL-77763-S1

8 FX10XT/FX10M62S

2010

YAMAHA MOTOR CO., LTD. 2500 SHINGAI, IWATA, JAPAN

8AC-2817L-00

Location of the important labels

10 FX10RTRS	10 FX10XT
MODEL : RFX10RSS	MODEL : RFX10ST2
MAX.POWER : 94.2 kW	MAX.POWER : 94.2 kW
MASS IN RUNNING ORDER : 268 kg	MASS IN RUNNING ORDER : 274 kg
8HK-2156A-10	8HL-2156A-20
10 FX10M62S
MODEL : RFX10RMS
MAX.POWER : 94.2 kW
MASS IN RUNNING ORDER : 276 kg
8HR-2156A-10
FX10RTRS
11	12
WARNING

This unit contains high pressure nitrogen gas.

Mishandling can cause explosion.

•Read owner’s manual for instructions.

•Do not incinerate, puncture or open.

AVERTISSEMENT

Cette unité contient de I’azote à haute pression.

Une mauvaise manipulation peut entraîner d’explosion.

• Voir le manuel d’utilisateur pour les instructions.

• Ne pas brûler ni perforer ni ouvrir.

8GT-22259-50

4AA-22259-40

FX10XT

11,12

4AA-22259-40

Location of the important labels

FX10M62S

WARNING

This unit contains high pressure nitrogen gas. Mishandling can cause explosion.

•Read owner’s manual for instructions.

•Do not incinerate, puncture or open.

AVERTISSEMENT

Cette unité contient de I’azote à haute pression.

Une mauvaise manipulation peut entraîner d’explosion.

• Voir le manuel d’utilisateur pour les instructions.

• Ne pas brûler ni perforer ni ouvrir.

8HR-22259-00

•Nepasbrûlerniperforerni.ouvrir
•Voirlemanueldutilisateurpourles.instructions		’
Unemauvaisemanipulationpeut’entraînerd.explosion
CetteunitcontientàdeIazotehaute.pression	’	é

AVERTISSEMENT

WARNING

This unit contains high pressure nitrogen gas.

Mishandling can cause explosion.

•Read owner’s manual for instructions.

•Do not incinerate, puncture or open.

8HR-22259-10

WARNING

This unit contains high pressure nitrogen gas.

Mishandling can cause explosion.

•Read owner’s manual for instructions.

•Do not incinerate, puncture or open.

	•Nepasbrûlerniperforerni.ouvrir
	•Voirlemanueldutilisateurpourles.instructions		’
	Unemauvaisemanipulationpeutentraînerune.explosion
	CetteunitcontientdeI’azotesoushaute.pression		é

	AVERTISSEMENT
	8HR-22259-40

Location of the important labels

Familiarize yourself with the following pictograms and read the explanatory text.

Read the Owner’s manual.

This unit contains high-pressure nitrogen gas. Mishandling can cause an explosion. Do not incinerate, puncture or open.

This pictogram shows the sled hitch tow weight limit (combined weight of the sled and all cargo in the sled). Overloading can cause loss of control.

Loss of control can result in severe injury or death.

This pictogram shows the sled hitch tongue weight limit (weight on the sled tongue).

Overloading can cause loss of control.

Loss of control can result in severe injury or death.

1 Model Name

******

2 Max. Power

*** kW *** kg

3 Mass In Running Order

		1 Year of construction
****

YAMAHA MOTOR CO., LTD. 2500 SHINGAI, IWATA, JAPAN

Location of the important labels

For RUSSIA

	5	7
	4	7
	4
	3
	2	1

8	9 10 11
	12
	13

Location of the important labels

1 FX10M62S

4 FX10RTRS

8FN-77761-R1

8GL-77761-R0

TUNE-UP SPECIFICATIONS			SPECIFICATIONS DE LA MISE AU POINT
DRIVE			ENTRAÎNEMENT
1. CHAIN CASE OIL Q’TY		200 cm³ (6.8 oz)	1. CAPACITÉ D’HUILE DU CARTER DE CHAÎNE
2. CHAIN CASE OIL TYPE					200 cm³
		GL-3 75W or 80W	2. TYPE D’HUILE DU CARTER DE CHAÎNE
3. TRACK TENSION				GL-3 75W or 80W
	30 ~ 35 mm (1.18 ~ 1.38 in)/100 N (10 kg, 22 lb)		3. FLÈCHE DE LA CHENILLE	30 ~ 35 mm/100 N (10 kg)

*FOR MORE INFO: SEE SERVICE MANUAL FOR THIS MODEL.

*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

*POUR PLUS DE DÉTAIL: VOIR LE MANUEL D’ATELIER POUR CE MODÈLE.

*LES CARACTÉRISTIQUE TECHNIQUES SONT SUSCEPTIBLES DE CHANGER SANS NOTIFICATION

PRÉALABLE.

8HA-47578-00

4 FX10XT

TUNE-UP SPECIFICATIONS

DRIVE

1. CHAIN CASE OIL Q’TY		200 cm³ (6.8 oz)
2. CHAIN CASE OIL TYPE		GL-3 75W or 80W

3. TRACK TENSION

25 ~ 30 mm (0.98 ~ 1.18 in)/100 N (10 kg, 22 lb)

*FOR MORE INFO: SEE SERVICE MANUAL FOR THIS MODEL.

*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

SPECIFICATIONS DE LA MISE AU POINT

ENTRAÎNEMENT

1. CAPACITÉ D’HUILE DU CARTER DE CHAÎNE

200 cm³

2. TYPE D’HUILE DU CARTER DE CHAÎNE

GL-3 75W or 80W

3. FLÈCHE DE LA CHENILLE

25 ~ 30 mm/100 N (10 kg)

*POUR PLUS DE DÉTAIL: VOIR LE MANUEL D’ATELIER POUR CE MODÈLE.

*LES CARACTÉRISTIQUE TECHNIQUES SONT SUSCEPTIBLES DE CHANGER SANS NOTIFICATION

PRÉALABLE.

8GL-47578-00

4 FX10M62S

TUNE-UP SPECIFICATIONS

DRIVE

1. CHAIN CASE OIL Q’TY		200 cm³ (6.8 oz)
2. CHAIN CASE OIL TYPE		GL-3 75W or 80W

3. TRACK TENSION

40 ~ 45 mm (1.57 ~ 1.77 in)/100 N (10 kg, 22 lb)

*FOR MORE INFO: SEE SERVICE MANUAL FOR THIS MODEL.

*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

SPECIFICATIONS DE LA MISE AU POINT

ENTRAÎNEMENT

1. CAPACITÉ D’HUILE DU CARTER DE CHAÎNE

200 cm³

2. TYPE D’HUILE DU CARTER DE CHAÎNE

GL-3 75W or 80W

3. FLÈCHE DE LA CHENILLE

40 ~ 45 mm/100 N (10 kg)

*POUR PLUS DE DÉTAIL: VOIR LE MANUEL D’ATELIER POUR CE MODÈLE.

*LES CARACTÉRISTIQUE TECHNIQUES SONT SUSCEPTIBLES DE CHANGER SANS NOTIFICATION

PRÉALABLE.

8HR-47578-00

Location of the important labels

TUNE-UP SPECIFICATIONS

ENGINE

1.SPARK PLUG	CR9E(NGK)
2.SPARK PLUG GAP	0.7 ~ 0.8 mm (0.028 ~ 0.031 in)
4.IDLE SPEED	1500 ± 50 r/min

SPECIFICATIONS DE LA MISE AU POINT 8GL MOTEUR

1.TYPE DE BOUGIE		CR9E(NGK)
2.ECARTEMENT DES ÉLECTRODES		0.7 ~ 0.8 mm
3.RÉGIME DE RALENTI	1500 ± 50 r/min
		8GL-1417E-00

6 FX10M62S
VIKTIGT	MUISTA

8HR-2815M-S0

8GL-77763-S1

8 FX10XT/FX10M62S

8HA-77762-R0

2010

YAMAHA MOTOR CO., LTD. 2500 SHINGAI, IWATA, JAPAN

8AC-2817L-00

Location of the important labels

10 FX10RTRS	10 FX10XT
MODEL : RFX10RSS	MODEL : RFX10ST2
MAX.POWER : 94.2 kW	MAX.POWER : 94.2 kW
MASS IN RUNNING ORDER : 268 kg	MASS IN RUNNING ORDER : 274 kg
8HK-2156A-10	8HL-2156A-20
10 FX10M62S	11
MODEL : RFX10RMS
MAX.POWER : 94.2 kW
MASS IN RUNNING ORDER : 276 kg
8HR-2156A-10

FX10RTRS
12	13
WARNING

This unit contains high pressure nitrogen gas.

Mishandling can cause explosion.

•Read owner’s manual for instructions.

•Do not incinerate, puncture or open.

AVERTISSEMENT

Cette unité contient de I’azote à haute pression.

Une mauvaise manipulation peut entraîner d’explosion.

• Voir le manuel d’utilisateur pour les instructions.

• Ne pas brûler ni perforer ni ouvrir.

8GT-22259-50

4AA-22259-40

FX10XT

12,13

4AA-22259-40

Location of the important labels

FX10M62S

WARNING

This unit contains high pressure nitrogen gas. Mishandling can cause explosion.

•Read owner’s manual for instructions.

•Do not incinerate, puncture or open.

AVERTISSEMENT

Cette unité contient de I’azote à haute pression.

Une mauvaise manipulation peut entraîner d’explosion.

• Voir le manuel d’utilisateur pour les instructions.

• Ne pas brûler ni perforer ni ouvrir.

8HR-22259-00

•Nepasbrûlerniperforerni.ouvrir
•Voirlemanueldutilisateurpourles.instructions		’
Unemauvaisemanipulationpeut’entraînerd.explosion
CetteunitcontientàdeIazotehaute.pression	’	é

AVERTISSEMENT

WARNING

This unit contains high pressure nitrogen gas.

Mishandling can cause explosion.

•Read owner’s manual for instructions.

•Do not incinerate, puncture or open.

8HR-22259-10

WARNING

This unit contains high pressure nitrogen gas.

Mishandling can cause explosion.

•Read owner’s manual for instructions.

•Do not incinerate, puncture or open.

	•Nepasbrûlerniperforerni.ouvrir
	•Voirlemanueldutilisateurpourles.instructions		’
	Unemauvaisemanipulationpeutentraînerune.explosion
	CetteunitcontientdeI’azotesoushaute.pression		é

	AVERTISSEMENT
	8HR-22259-40

Safety information

ESU10183

As the vehicle’s owner, you are responsible for the safe and proper operation of your snowmobile. When you ride your snowmobile, you must know and use the following for your safety. Severe injury or death may result if you ignore any of the following.

Before you operate your snowmobile

●Read the Owner’s Manual and all labels. Become familiar with all of the operating controls and their function. Consult a Yamaha dealer about any control or function you do not understand.

●Wear protective clothing. Wear an approved helmet, and a face shield or goggles. Also, wear a good quality snowmobile suit, boots, and a pair of gloves or mittens that will permit use of your thumbs and fingers for operation of the controls.

●Do not operate the snowmobile after or while drinking alcohol or taking drugs. Your ability to operate the snowmobile is reduced by the influence of alcohol or drugs.

Prepare your snowmobile

●Perform the pre-operation checks each time you use the vehicle to make sure it is in safe operating condition. Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equipment damage. See page 46 for a list of pre-operation checks.

●Apply the parking brake before starting the engine. Never drive the snowmobile with the parking brake applied. This may overheat the brake disc and reduce braking ability.

While using your snowmobile

●This snowmobile was not manufactured for use on public streets, roads, or highways. Such use is prohibited by law, and you could collide with another vehicle.

●This snowmobile is designed to carry the OPERATOR ONLY. Passengers are prohibited. Carrying a passenger can cause loss of control.

●Be careful where you ride. There may be obstacles hidden beneath the snow. Stay on established trails to minimize your exposure to hazards. Ride slowly and cautiously when you ride off of established trails. Hitting a rock or stump, or running into wires could cause an accident and injury.

●This snowmobile is not designed for use on surfaces other than snow or ice. Use on dirt, sand, grass, rocks, or bare pavement may cause loss of control and may damage the snowmobile.

●Always ride with other snowmobilers when going on a ride. You may need help if you run out of fuel, have an accident, or damage your snowmobile.

Safety information

●Many surfaces such as ice and hardpacked snow require much longer stopping distances. Be alert, plan ahead and begin decelerating early. The best braking method on most surfaces is to release the throttle and apply the brake gently—not suddenly.

Avoid carbon monoxide poisoning

All engine exhaust contains carbon monoxide, a deadly gas. Breathing carbon monoxide can cause headaches, dizziness, drowsiness, nausea, confusion, and eventually death. Carbon monoxide is a colorless, odorless, tasteless gas which may be present even if you do not see or smell any engine exhaust. Deadly levels of carbon monoxide can collect rapidly and you can quickly be overcome and be unable to save yourself. Also, deadly levels of carbon monoxide can linger for hours or days in enclosed or poorly-ventilated areas. If you experience any symptoms of carbon monoxide poisoning, leave the area immediately, get fresh air, and SEEK MEDICAL TREATMENT.

●Do not run the engine indoors. Even if you try to ventilate engine exhaust with fans or open windows and doors, carbon monoxide can rapidly reach dangerous levels.

●Do not run the engine in poorly ventilated or partially enclosed areas such as barns, garages, or carports.

●Do not run the engine outdoors where engine exhaust can be drawn into a building through openings such as windows and doors.

Genuine Yamaha Accessories

Choosing accessories for your snowmobile is an important decision. Genuine Yamaha Accessories, which are available only from a Yamaha dealer, have been designed, tested, and approved by Yamaha for use on your snowmobile. Many companies with no connection to Yamaha manufacture parts and ac-

cessories or offer other modifications for Yamaha vehicles. Yamaha is not in a position to test the products that these aftermarket companies produce. Therefore, Yamaha can neither endorse nor recommend the use of accessories not sold by Yamaha or modifications not specifically recommended by Yamaha, even if sold and installed by a Yamaha dealer.

Maintenance and storage

●When laying the snowmobile on its side for maintenance, use a suitable stand to keep it in a stable and level position.

●Do not leave the snowmobile on its left side for an extended period of time. Fuel may leak out from the fuel breather hose.

●Do not allow anyone to stand behind the snowmobile when starting, inspecting, or adjusting the snowmobile. A broken track, track fittings, or debris thrown by the track could be dangerous to the operator or bystanders.

●Modifications made to the snowmobile not approved by Yamaha, or the removal of original equipment may render your snowmobile unsafe for use, which may cause severe personal injury. Modifications may also make the snowmobile illegal to use.

●Never store the snowmobile with fuel in the fuel tank inside a building where ignition sources are present such as hot water and space heaters, an open flame, sparks, clothes dryers, and the like. Allow the engine to cool off before storing the snowmobile in an enclosed space.

Yamaha FX10A, FX10RTRSA, FX10XTA, FX10M53SA, FX10M62SA User Manual

Description

ESU10261

FX10				FX10RTRS
1,2,3	4	5,6,7,8,9	11	1,2,3	4	5,6,7,8,9	11

	13	12			13	12
FX10M53S/FX10M62S				FX10XT
1,2,3 4	5,6,7,8,9	10	11	1,2,3 4	5,6,7,8,9	11

1.	Storage pouch	10. Strap (FX10M53S/FX10M62S)
2.	Tool kit	11. Tail/brake light
3.	Coolant reservoir	12. Slide rail suspension
4.	Air filter	13. Drive track

5.Battery

6.Main fuse

7.Fuel injection system fuse

8.Oil filler cap

9.Fuse box

Description

6 7

1.	Brake lever	6.	Engine stop switch
2.	Parking brake lever	7.	Throttle lever
3.	Grip/thumb warmer adjusting switch	8.	Shift lever
4.	Auxiliary DC jack (FX10M53S/FX10M62S)	9.	Headlight beam switch
5.	Main switch

TIP

●The snowmobile you have purchased may differ slightly from those shown in the figures of this manual.

●Design and specifications are subjected to change without notice.

Control functions

ESU10292

Main switch

The main switch controls the ignition and lighting systems. The various positions are described below.

1.Off

2.On

3.Start

Off

The ignition circuit is switched off.

The key can be removed only in this position.

The ignition circuit is switched on.

Start

The starting circuit is switched on.

The starter motor cranks the engine.

NOTICE: Release the switch immediately after the engine starts. [ECS00021]

TIP

The headlights and taillight come on after the engine is started.

ESU10312

Throttle lever

Once the engine is running cleanly, squeezing the throttle lever will increase the engine speed and cause engagement of the drive train. Regulate the speed of the snowmobile by varying the throttle position. Because the throttle is spring-loaded, the snowmobile will decelerate, and the engine will return to idle when it is released.

1. Throttle lever

ESU10347

Throttle override system (T.O.R.S.)

EWS00041

WARNING

If the T.O.R.S. is activated, make sure that the cause of the malfunction has been corrected and that the engine can be operated without a problem before restarting the engine. Continuing to operate with a malfunction could cause loss of control or damage.

If the throttle valves or throttle cable malfunctions during operation, the T.O.R.S. will be activated when the throttle lever is released.

The T.O.R.S. is designed to override the fuel injection and limit the engine speed to less than the clutch engagement speed if the throttle valves fail to return to the idle position when the throttle lever is released. (See page 95 for the clutch engagement speed.)

	Idling	Riding	Malfunc-
	Idling	Riding	tion
			tion

Throttle	Released	Squeezed	Released
lever	Released	Squeezed	Released
lever

Throttle	Closed	Open	Open
valve	Closed	Open	Open
valve

T.O.R.S.	Engine	Engine	T.O.R.S.
T.O.R.S.	runs	runs	will be ac-
	properly.	properly.	tivated.

Control functions

TIP

If the T.O.R.S. is activated, the warning light and engine trouble warning indicator will flash, and the two-digit code “84” will flash in the meter display. If this occurs, have a Yamaha dealer check the system as soon as possible.

When the key is turned to the on position, the warning light, the low coolant temperature indicator light, and all segments of the meter display come on and go off.

The grip warmer level is initially displayed for 5 seconds, then the display switches to the fuel meter.

1.Warning light “”

2.Engine trouble warning indicator “”

3.Two-digit code “84”

ESU12725

Multi-function meter unit

The multi-function meter unit is equipped with the following:

●a digital speedometer

●an odometer

●a tripmeter (which shows the distance traveled since it was last set to zero)

●an engine speed meter (which shows the engine speed; not for use while riding)

●warning indicators (which show engine trouble, coolant temperature, fuel level, and oil level warnings)

●indicator lights (which show high beam and low coolant temperature conditions)

●a warning light (which shows warnings together with the warning indicators)

●a fuel meter (which shows the fuel remaining in the fuel tank)

●a grip/thumb warmer level indicator (which shows the grip warmer or the thumb warmer level)

5 4 3

1.Meter display

2.Warning indicators

3.High beam indicator light “ ”

4.Low coolant temperature indicator light “ ”

5.Warning light “”

6.“RESET” button

7.“SELECT” button

Odometer, tripmeter, and engine speed meter modes

1. Odometer/tripmeter/engine speed meter

Pushing the “SELECT” button switches the display between the odometer mode “ODO”, tripmeter mode “TRIP”, and engine speed meter mode “r/min” in the following order:

ODO → TRIP → r/min → ODO

Control functions

To reset the tripmeter, push the “RESET” button for at least 1 second while the tripmeter is displayed.

TIP

●To switch the speedometer, odometer, and tripmeter displays between kilometers and miles, select the odometer mode “ODO”, and then push the “SELECT” button for at least 10 seconds while the snowmobile is stopped.

●Use the engine speed meter only when checking the snowmobile and performing basic maintenance. The engine speed meter should not be used while riding the snowmobile since the reading will vary from the actual engine speed.

ESU10411

High beam indicator light “ ”

The high beam indicator light comes on when the high beams of the headlights are switched on. (See page 25 for headlight beam switch operation.)

1. High beam indicator light “ ”

ESU10473

Low coolant temperature indicator light “”

The low coolant temperature indicator light comes on when the coolant temperature is low and informs the rider that the snowmobile should be warmed up. After the engine is started, warm it up until the indicator light goes off.

The snowmobile can be operated normally after the indicator light goes off.

1.Low coolant temperature indicator light “ ”

TIP

Drive the snowmobile at low speeds when the low coolant temperature indicator light is on. If the engine speed is too high, maximum engine speed is reduced to protect the engine.

ESU10434

Fuel meter and grip/thumb warmer level indicator

The fuel meter and grip/thumb warmer level indicator have eight segments which show the amount of fuel remaining in the fuel tank, the grip warmer level, or the thumb warmer level.

1.Fuel meter and grip/thumb warmer level indicator

+ 80 hidden pages