Yamaha DVDS-1800 Service manual
DVD AUDIO/VIDEO SA-CD PLAYER
DVD-S1800
SERVICE MANUAL
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
DVD-S1800
■ CONTENTS
TO SERVICE PERSONNEL ...................................... 2–4
PREVENTION OF ELECTROSTATIC DISCHARGE .... 4
LOCALE MANAGEMENT INFORMATION ................... 4
FRONT PANEL .............................................................. 5
REAR PANELS .......................................................... 5–6
REMOTE CONTROL PANEL ........................................ 6
SPECIFICATIONS.......................................................... 7
INTERNAL VIEW ........................................................... 8
TRADE MODE ................................................................ 8
ERROR MESSAGE ........................................................ 8
101073
2007 All rights reserved.
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
TROUBLESHOOTING ................................................... 8
DISASSEMBLY PROCEDURES ........................... 10–11
DISPLAY DATA ..................................................... 12–13
IC DATA ................................................................. 14–31
BLOCK DIAGRAM ....................................................... 32
WIRING DIAGRAM ...................................................... 33
PRINTED CIRCUIT BOARDS................................ 34–37
SCHEMATIC DIAGRAMS ...................................... 38–44
REPLACEMENT PARTS LIST .............................. 45–47
REMOTE CONTROL.............................................. 48–49
P.O.Box 1, Hamamatsu, Japan
'07.09
DVD-S1800
■ TO SERVICE PERSONNEL
1. Critical Components Information
Components having special characteristics are
marked s and must be replaced with parts having
specifications equal to those originally installed.
2. Leakage Current Measurement (For 120V Models
Only)
When service has been completed, it is imperative to
verify that all exposed conductive surfaces are properly insulated from supply circuits.
● Meter impedance should be equivalent to 1500 ohms
shunted by 0.15µF.
DVD-S1800
WARNING: CHEMICAL CONTENT NOTICE!
This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive
harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
WALL
OUTLET
● Leakage current must not exceed 0.5mA.
● Be sure to test for leakage with the AC plug in both
polarities.
EQUIPMENT
UNDER TEST
INSULATING
TABLE
AC LEAKAGE
TESTER OR
EQUIVALENT
About lead free solder
All of the P.C.B.s installed in this unit and solder joints are soldered using the lead free solder.
Among some types of lead free solder currently available, it is recommended to use one of the following types for the repair
work.
• Sn + Ag + Cu (tin + silver + copper)
• Sn + Cu (tin + copper)
• Sn + Zn + Bi (tin + zinc + bismuth)
Caution:
As the melting point temperature of the lead free solder is about 30°C to 40°C (50°F to 70°F) higher than that of the lead
solder, be sure to use a soldering iron suitable to each solder.
WARNING: Laser Safety
This product contains a laser beam component. This component may emit invisible, as well as visible radiation,
which may cause eye damage. To protect your eyes and skin from laser radiation, the following precautions must be
used during servicing of the unit.
1) When testing and/or repairing any component within the product, keep your eyes and skin more than 30 cm away from
the laser pick-up unit at all times. Do not stare at the laser beam at any time.
2) Do not attempt to readjust, disassemble or repair the laser pick-up, unless noted elsewhere in this manual.
3) CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
2
DVD-S1800
Laser Emitting conditions:
1) When the Top Cover is removed, and the STANDBY/ON SW is turned to the "ON" position, the laser component will emit
a beam for several seconds to detect if a disc is present. During this time (5-10 sec.) the laser may radiate through the
lens of the laser pick-up unit. Do not attempt any servicing during this period!
If no disc is detected, the laser will stop emitting the beam. When a disc is loaded, you will not be exposed to any laser
emissions.
2) The laser power level can be adjusted with the VR on the pick-up PWB, however, this level has been set by the factory
prior to shipping from the factory. Do not adjust this laser level control unless instruction is provided elsewhere in this
manual. Adjustment of this control can increase the laser emission level from the device.
DVD-S1800
Laser Diode Properties
Type: Semiconductor laser GaAlAs
Wave length: 650 nm (DVD)
790 nm (VCD/CD)
Output Power: 1.45 mW (DVD)
1.13 mW (VCD/CD)
Beam divergence: 60 degrees
VARO! : AVATTAESSA JA SUOJALUKITUS
OHITETTAESSA OLET ALTTIINA
NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE. ÄLÄ KATSO
SÄTEESEEN.
VARNING! : OSYNLIG LASERSTRÅLNING NÄR
DENNA DEL ÄR ÖPPNAD OCH
SPÄRREN ÄR URKOPPLAD.
BETRAKTA EJ STRÅLEN.
3
DVD-S1800
Warning for power supply
The primary side of the power supply carries live mains voltage when the player is connected to the mains even when
the player is switched off !
This primary area is not shielded so it is possible to touch copper tracks and/or components when servicing the player.
Service personnel have to take precautions to prevent touching this area or components in this area.
Note:
The screws on the DVD mechanism may never be touched, removed or re-adjusted.
Handle the DVD mechanism with care when the unit has to be exchanged!
The DVD mechanism is very sensitive for dropping or giving shocks.
■ PREVENTION OF ELECTROSTATIC DISCHARGE
DVD-S1800
The laser diode in the DVD mechanism may be damaged due to static electricity from clothes or the human body. Use caution
to prevent electrostatic damage when servicing or handling the DVD-mechanism.
1. Grounding for electrostatic damage prevention
Some devices, such as the DVD player, use an optical pickup (laser diode) that will be damaged by static electricity in the
working environment. Only attempt service after ensuring that all grounding procedures have been completed.
1. Worktable grounding
Put a grounded conductive material (sheet) or iron sheet on the area where the optical pickup is placed.
2. Human body grounding
Use an anti-static wrist strap to discharge the static electricity from your body.
Anti-static wrist strap
1M-ohms
Conductive material
(sheet) or steel sheet
2. Handling Precautions for DVD mechanism
1. Handle the DVD mechanism gently, as it is an extremely high-precision assembly.
2. The flexible cable lines may break if an excessive force is applied to it. Use caution when handling the cable.
3. The semi-fixed resistor for laser power adjustment should not be adjusted. Do not turn the resistor.
■ LOCALE MANAGEMENT INFORMATION
Locale Management Information : This DVD player is designed and manufactured to respond to the Locale
Management Information that is recorded on a DVD disc. If the Locale number described on the DVD disc does not
correspond to the Locale number of this DVD player, this DVD player cannot play this disc.
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other
intellectual property rights owned by
Macrovision Corporation and other rights
owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly
is prohibited.
2
1
4
2
5
5
5
6
3
2
4
4
■ SPECIFICATIONS
DVD-S1800
PLAYBACK SYSTEM
DVD-video
DVD-audio
DVD-R, DVD-RW
DVD+R, DVD+RW, DVD+R DL
Video CD, SVCD
SA-CD multi-channel and SA-CD stereo
CD
Picture CD
CD-R, CD-RW
VIDEO PERFORMANCE
Video (CVBS) output 1 Vpp into 75 ohms
S-video output Y: 1 Vpp into 75 ohms
C: 0.3 Vpp into 75 ohms
Component video output Y: 1 Vpp into 75 ohms
PB/CB, PR/CR: 0.7 Vpp into 75 ohms
RGB (SCART) output (G, F models)
0.7 Vpp into 75 ohms
Black level shift (U model)
On/Off
AUDIO FORMAT
Digital Dolby Digital/DTS/MPEG
Compressed digital
PCM 16, 20, 24 bits
fs 44.1, 48, 88.2, 96 kHz
MP3 (ISO 9660) 32 kbps to 320 kbps
fs 16, 22.05, 24, 32, 44.1, 48 kHz
WMA 64 kbps to 320 kbps
mono, stereo
Full decoding of Dolby Digital and DTS multi-channel sound
Analog stereo sound
Dolby surround compatible downmix from Dolby Digital multichannel sound
AUDIO PERFORMANCE
DA converter 24 bits, 192 kHz
Signal to noise (1 kHz) 115 dB
Dynamic range (1 kHz) 105 dB
DVD fs 96 kHz 2 Hz to 44 kHz
fs 48 kHz 2 Hz to 22 kHz
SVCD fs 48 kHz 2 Hz to 22 kHz
fs 44.1 kHz 2 Hz to 20 kHz
CD/VCD fs 44.1 kHz 2 Hz to 20 kHz
Distortion and noise (1 kHz)
TV STANDARD
Number of lines PAL: 625, NTSC: 525
Vertical frequency PAL: 50 Hz, NTSC: 60 Hz
Playback Multistandard (PAL/NTSC)
0.002 %
CONNECTIONS
Video output Cinch (yellow) x 1
S-video output Mini DIN, 4 pins x 1
Component video output
Y output Cinch (green) x 1
PB/CB output Cinch (blue) x 1
PR/CR output Cinch (red) x 1
SCART (G, F models) Euroconnector x 1
Digital output Coaxial x 1
Optical x 1
IEC60958 for CDDA/LPCM,
IEC61937 for MPEG 1/2,
Dolby Digital and DTS
HDMI (Ver. 1.1) Type A x 1
IEC60958 for CDDA/LPCM,
IEC61937 for MPEG 1/2,
Dolby Digital and DTS, PCM
(PPCM) multi/2ch (DVD-audio)
Audio output
2 channel analog output
MIXED 2CH L/R Cinch (white/red) x 1 pair
Multi channel analog output
FRONT L/R Cinch (white/red) x 1 pair
SURROUND L/R Cinch (white/red) x 1 pair
CENTER Cinch (black) x 1
SUBWOOFER Cinch (black) x 1
GENERAL
Dimensions (W x H x D) 435 x 87 x 284.5 mm
(17-1/8" x 3-7/16" x 11-3/16")
Weight 3.3 Kg (7 lbs. 4 oz)
Finish Gold color (K model)
Black color (U, G, F models)
Titanium color (G, F, L models)
Power supply AC 120 V, 60 Hz (U model)
AC 100-240 V, 50/60 Hz
(K, L models)
AC 230 V, 50 Hz (G, F models)
Power consumption Approx. 21 W
Standby power consumption < 0.5 W
ACCESSORIES
Remote control x 1
Battery (AAA, R03, UM-4) x 2
Power cable (2 m) x 1 (U, G, F, L models)
Power cable (2 m) x 2 (K model)
Video pin cable (1 m) x 1
Audio pin cable (1 m) x 1
* Specifications are subject to change without prior notice.
U ........ U.S.A. model
K ........ Korean model
G ........ European model
F ......... Russian model
L ......... Singapore model
Manufactured under license from
Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of
Dolby Laboratories.
“DTS” and “DTS Digital Surround”
are registered trademarks of Digital
Theater Systems, Inc.
DivX, DivX Certified, and associated logos are trademarks of DivX,
Inc. and are used under license.
“DCDi” is a trademark of Faroudja,
a division of Genesis Microchip, Inc.
“HDMI”, the “HDMI” logo and “High
Definition Multimedia Interface” are
trademarks or registered trademark
of HDMI Licensing LLC.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
• DIMENSIONS
435 (17-1/8")
7
(1/4")
284.5 (11-3/16")
4
(3/16")
87 (3-7/16")
70 (2-3/4") 273.5 (10-3/4")
17
(11/16")
Unit: mm (inch)
7
DVD-S1800
■ INTERNAL VIEW
123 4
1
POWER SUPPLY UNIT
2
DVD MECHANISM UNIT
3
MAIN (1) P.C.B.
4
MAIN (4) P.C.B. (G, F models)
5
FRONT (1) P.C.B.
6
FRONT (2) P.C.B.
56
■ TRADE MODE
In the TRADE mode, the tray open/close function is stopped temporarily.
• Setting TRADE mode
1. Connect the power cable of the main unit to the AC outlet.
2. Press the “STANDBY/ON” key of the main unit or remote controller to turn on the power.
3. Press the “OPEN/CLOSE” key of the main unit to open the tray.
4. Place a disc in the tray and press the “OPEN/CLOSE” key of the main unit to close the tray.
5. While pressing the “SKIP+/SEARCH+” key of the main unit and press the “STOP” key for 3 seconds or longer.
6. When the TRADE mode is set, [TRADE ON] is displayed which then returns to the normal display.
Note: Even after the TRADE mode is set, all functions remain the same as normal except the “OPEN/ CLOSE” key.
Press the “OPEN/CLOSE” key, and [TRAY LOCKED] is displayed.
■ ERROR MESSAGE
Display Cause
NO DISC
UNKNOWN DISC
When no disc is loaded in the tray.
When a disc which cannot be played or recognized is loaded in the tray.
■ TROUBLESHOOTING
• HDMI Reset
When no picture is displayed even though the main unit and TV monitor are connected with the HDMI cable
1. Press the “STOP” key of the main unit or on the remote control twice.
2. While pressing the “STOP” key of the main unit, press the “PLAY/PAUSE” key for 3 seconds or longer.
3. [HDMI RESET] is displayed of the main unit which then returns to the normal display.
• VIDEO Reset
When no picture is displayed or picture is displayed but not properly even though the main unit and TV monitor are
connected with the video pin cable or the like
1. Press the “OPEN/CLOSE” key to open the tray.
2. Press the “CLEAR” key on the remote control.
3. Press the “2”, “5”, “8” and “0” keys on the remote control.
4. Press the “AUDIO” key on the remote control.
Remote control
• Canceling TRADE mode
1. Press the “STOP” key to discontinue reproduction.
2. While pressing the “SKIP+/SEARCH+” key of the main unit and press the “STOP” key for 3 seconds or longer.
3. When the TRADE mode is cancelled, [TRADE OFF] is displayed which then returns to the normal display.
"OPEN/CLOSE" key
"STANDBY/ON" key
8
"SKIP+/SEARCH+" key
Main unit
Tr ay "OPEN/CLOSE" key
"PLAY/PAUSE" key
"STOP" key
MEMO
DVD-S1800
DVD-S1800
MEMO
9
DVD-S1800
■ DISASSEMBLY PROCEDURES
(Remove parts in disassembly order as numbered.)
Disconnect the power cable from the AC outlet.
1. Removal of Top Cabinet
a. Remove 6 screws (1). (Fig. 1)
b. Lift up the rear side of the top cover, then remove rear-
ward. (Fig. 1)
DVD-S1800
DVD mechanism unit
Tray lid
2. Removal of DVD Mechanism Unit
a. Eject the tray. (See “How to manually eject the tray”.)
b. Remove the tray lid upward and close the tray. (Fig. 1)
c. Remove 2 screws (2). (Fig. 1)
d. Turn the traverse gear in the arrow direction until the
P.C.B. of the DVD mechanism unit is seen. (Fig. 2)
e. Solder the lands in the P.C.B. of the DVD mechanism
unit with the anti-static soldering iron. (Fig. 2)
Note
• After you have finished repairing , connect the
flexible flat cable to CN11 in advance and then re-
move the solder from the short-circuit location
with the anti-static soldering iron.
2
1
1
1
Hook
4
3
4
Hook
Front panel ass'y
Top cover
Hook
Front Front
Front panel ass'y
Front panel ass'y
1
Hook
DVD mechanism unit
Fig. 1
10
DVD-S1800
e. Remove CN11, CN12 and CN13. (Fig. 2)
f. Lift up the rear side of the DVD mechanism unit, then
remove 2 hooks and remove rearward. (Fig. 1)
DVD mechanism unit
Traverse gear
DVD mechanism unit
3. Removal of Front Panel Ass’y
a. Remove 4 screws (3). (Fig. 1)
b. Remove 2 screws (4). (Fig. 1)
c. Remove CX41. (Fig. 2)
d. Remove 2 hooks and then remove the front panel ass’y
forward. (Fig. 1)
DVD-S1800
SolderP. C . B .
MAIN (1) P.C.B.
• How to manually eject the tray
a. Turn the loading gear in the direction indicated with a
flatblade screwdriver until the tray is ejected.
b. Gently pull the tray out.
Bottom side
Tr ay
CX41
Fig. 2
CN12
CN13
CN11
CN11
CN11
Locked
Flexible flat cable
Unlocked
Tr ay
Flatblade screwdriver
Loading gear
11
DVD-S1800
■ DISPLAY DATA
● F401 : HCA14SM16 (FRONT P.C.B.)
j1
PATTERN AREA
DVD-S1800
● PIN CONNECTION
Pin No.
Connection50F249F248NP47NP46NX45NX44NX43NX NX NX NX NX NX NX NX NX NX NX NX NX NX NX NX NX NX
Pin No.
Connection25NX
Note : 1) F1, F2 ..... Filament pin 2) NP ..... No pin 3) NC ..... No connection 4) NX ..... No extended pin
24NX23NX22NX21NX20NX19NX18NX17NX161G15NC14
42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26
12
11
10
GR113V
DD
DIN
CLKB
9
CSB
RSTB8OSCO7OSCI
6
V
EE
● GRID ASSIGNMENT
1G
12G13G14G
12345
678910
10G11G
5
GND
4NP3NP2F11
F1
3G 2G4G5G6G7G8G9G
12
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
26 27 28 29 30
31 32 33 34 35
(2G-14G)
● ANODE CONNECTION
GR14
GR13
14G
13G
SG1
SG2
SG3
SG4
SG5
SG6
SG7
SG8
SG9
SG10
SG11
SG12
SG13
SG14
SG15
SG16
SG17
SG18
SG19
SG20
SG21
SG22
SG23
SG24
SG25
SG26
SG27
SG28
SG29
SG30
SG31
SG32
SG33
SG34
SG35
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
GR12
12G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
GR11
11G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
GR10
10G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
GR9
9G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
GR8
8G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
GR7
7G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
GR6
6G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
GR5
5G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
GR4
4G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
GR3
3G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
GR2
2G
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
DVD-S1800
GR1
1G
DVD-S1800
13
DVD-S1800
■ IC DATA
IC11: ZR36778 (MAIN P.C.B.)
MPEG decoder
DVD-S1800
TRAY
SPINDLE
SLED
OPU
Disc loader
vvvvv
v
IR-RC
Receiver
SERVO
AFE
ADP DSP
Audio
ADC
DAC
Front Panel
Concentrator
MICROPROCESSOR
IC11
Vaddis
ZR36778
MCU
SPI/I2C/GPIO/DDC
PLL
VPU
v
v
8/16 Mbits
NOR
Flash
27 MHz
RESET
32/64/128
Mbits
SDRAM
RF amp
Servo amp
S/PDIF
Stereo
Mics
2 to 8
Speakers
TV
Monitor
14
1
2
3
4,5
6
7
8
9
10
11
12
13
14
15
16
17
18-19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
Pin Functions Direction DescriptionNo.
SSCRXD
GPCI/O[17]
PM[15]
MEMCS[1]#
GPCI/O[18]
VDDP
MEMAD
[15,16]
SYSIND[1,0]
MEMAD[14]
GCLKSEL
MEMAD[13]
FCUIF[29]
MEMAD[12]
PLLCFGA
MEMDA[15]
FCUIF[28]
MEMAD[11]
PLLCFGP
MEMDA[7]
FCUIF[9]
GNDP
MEMAD[10]
FCUIF[20]
MEMDA[14]
FCUIF[27]
MEMAD[9]
FCUIF[19]
MEMDA[6]
FCUIF[8]
MEMAD[8]
FCUIF[18]
MEMDA[13,5]
FCUIF[26,7]
MEMAD[20]
MEMCS[2]#
GPCI/O[19]
VDDP
MEMDA[12]
FCUIF[25]
MEMWR#
FCUIF[0]
MEMDA[4]
FCUIF[6]
VDDC
MEMDA[11]
FCUIF[24]
MEMDA[3]
FCUIF[5]
MEMAD[19]
PLLSEL
GNDC
MEMDA[10]
FCUIF[23]
MEMAD[18]
GNDP
MEMDA[2]
FCUIF[4]
MEMAD[17]
MEMDA[9]
FCUIF[22]
MEMAD[7]
FCUIF[17]
MEMDA[1]
FCUIF[3]
MEMAD[6]
I
SSC data input
I/O
General purpose I/O, monitored/controlled by the microprocessor or DSP or FCU SW
O
Probe mux data output
O
PNVM/SRAM chip select (active low) output
I/O
General purpose I/O, monitored/controlled by the microprocessor or DSP SW
S
3.3 V digital periphery power supply
O
PNVM/SRAM address bus outputs
I
General purpose system configuration indication input / Level sampled during RESET
O
PNVM/SRAM address bus output
I
GCLKPOUT or GCLKA function selection / Level sampled during RESET
O
PNVM/SRAM address bus output
O
Flash card interface unit output signal
O
PNVM/SRAM address bus output
I
Audio PLL configuration input / Level sampled during RESET / In normal operation the pin must be low during RESET
I/O
PNVM/SRAM bi-directional data bus
I/O
Flash card interface unit I/O signal
O
PNVM/SRAM address bus output
I
Process PLL configuration input / Level sampled during RESET / In normal operation the pin must be low during RESET
I/O
PNVM/SRAM bi-directional data bus
I/O
Flash card interface unit I/O signals
S
Digital periphery ground of 3.3 V supply
O
PNVM/SRAM address bus output
O
Flash card interface unit output signal
I/O
PNVM/SRAM bi-directional data bus
I/O
Flash card interface unit I/O signal
O
PNVM/SRAM address bus outputs
O
Flash card interface unit output signal
I/O
PNVM/SRAM bi-directional data bus
I/O
Flash card interface unit I/O signals
O
PNVM/SRAM address bus outputs
O
Flash card interface unit output signal
I/O
PNVM/SRAM bi-directional data bus
I/O
Flash card interface unit I/O signals
O
PNVM/SRAM address bus outputs
O
PNVM/SRAM chip select (active low) output
I/O
General purpose I/O, monitored/controlled by the microprocessor or DSP SW
S
3.3 V digital periphery power supply
I/O
PNVM/SRAM bi-directional data bus
I/O
Flash card interface unit I/O signal
O
PNVM/SRAM write enable (active low) output
O
Flash card interface unit output signal
I/O
PNVM/SRAM bi-directional data bus
O
Flash card interface unit output signal
S
1.8 V digital core power supply
I/O
PNVM/SRAM bi-directional data bus
I/O
Flash card interface unit I/O signal
I/O
PNVM/SRAM bi-directional data bus
I/O
Flash card interface unit I/O signals
O
PNVM/SRAM address bus outputs
I
PLL frequency selection -108 MHz (low) or 135 MHz (high) / Level sampled during RESET
S
Digital core ground of 1.8 V supply
I/O
PNVM/SRAM bi-directional data bus
I/O
Flash card interface unit I/O signal
O
PNVM/SRAM address bus output
S
Digital periphery ground of 3.3 V supply
I/O
PNVM/SRAM bi-directional data bus
I/O
Flash card interface unit I/O signals
O
PNVM/SRAM address bus output
I/O
PNVM/SRAM bi-directional data bus
I/O
Flash card interface unit I/O signal
O
PNVM/SRAM address bus outputs
O
Flash card interface unit output signal
I/O
PNVM/SRAM bi-directional data bus
I/O
Flash card interface unit I/O signals
O
PNVM/SRAM address bus outputs
DVD-S1800
DVD-S1800
15
Loading...