Yamaha ATS-2030 Quick Start Manual

ATS-2030 Quick Start Guide

Supplied items

Before assembling and connecting, make sure you have received all of the following items.
If anything is missing, please call 888-892-6242, 8AM to 5PM PST Monday through Friday.

U

Wireless subwoofer

(NS-WSW41)

Placement

Sound bar (ATS-CU2030) Mounting template

Remote control Two AAA batteries

(Install the batteries in

the remote control.)

Optical cable

1.5 m (4.9 ft)

RCA stereo cable

1.5 m (4.9 ft)

(Use when attaching the sound bar to a wall.)

Stand × 2

(For sound bar)

Screw × 2

(For attaching

the stand)

Place the sound bar in front of or below your TV, either with or
without a stand, at least 2'' away from your TV.
Place the subwoofer to the outside of the sound bar. To avoid
echoes from the wall, face the front side of the subwoofer
slightly inward.
The sound bar may also be mounted on a wall, using the
included mounting template and commercially available
screws. Refer to the Owner’s Manual for additional mounting
instructions.

NOTE

•

Be careful not to stack the sound bar/subwoofer with any other components,
as vibration may cause system disruption in other components.

Owner’s Manual

Quick Start Guide

(This sheet)

Continued to the reverse side

© 2014 Yamaha Corporation Printed in Indonesia ZM98660

Connections

Watching TV

1.

Connect the TV and sound bar with the
optical cable (supplied).

Remove the cap of the optical cable and check the
direction of the plug.

2.

Connect the power cable of the sound bar
and subwoofer to AC wall outlets.

Sound bar (rear)

Optical cable
(supplied)

Coaxial digital cable
(commercially available)

3.

Turn on the TV and set the volume to
minimum.

4.

Disable the TV speakers using the TV’s audio
settings menu (if available).

HINT

If a setting to disable the s peaker output is not available on
your TV, you may disable it by co nnecting headphones to the
headphone jack on the TV. For details, refer to the instruction
manual of the TV.

Connect to an AC wall outlet.
Leave the unit powered off until
all connections are complete.

Subwoofer (rear)

For details, refer to the Owner’s Manual.

1. Press to turn on the sound bar.

The subwoofer turns on automatically simultaneously with
the sound bar.

2. Press the TV key to select TV as the input source.

3. Select the desired input source on the TV.

4. Press the VOLUME (+/-) keys to adjust the
volume.

Playback of a Bluetooth® device

You can connect a Bluetooth device, such as a smartphone or
digital music player, with the sound bar wirelessly. For details,
refer to the Owner’s Manual.

TV

OPTICAL OUTPUT

Coaxial digital

audio output

(orange)

Set top box or playback device

(such as a Blu-ray Disc

TM

player)

Connect to an AC wall outlet.

HINT

If your playback device has a coaxial digital audio output,
you can connect it to the BD/DVD input of the sound bar
with a coaxial digital cable (commercially available).

... and more features!

For details about the other useful features, refer to the
Owner’s Manual.

– TV remote control learning function
– TV Remote Repeater
– Clear voice
– UniVolume

The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under
license.

Blu-ray Disc is a trademark of the Blu-ray Disc Association.