Yamaha ATS-1030 Quick Start Manual
ATS-1030 Quick Start Guide
Supplied items
Before assembling and connecting, make sure you have received all of the following items.
If anything is missing, please call 888-892-6242, 8AM to 5PM PST Monday through Friday.
Sound bar (ATS-1030)
Remote control Two AAA batteries
(Install the batteries in
the remote control.)
Placement
Optical cable
1.5 m (4.9 ft)
RCA stereo cable
1.5 m (4.9 ft)
(Use when attaching the sound bar to a wall.)
Mounting template
Spacer × 2
(Use when attaching the
sound bar to a wall.)
Place the sound bar in front of or below your TV, either with or
without a stand, at least 2'' away from your TV.
The sound bar may also be mounted on a wall, using the
included mounting template and commercially available
screws. Refer to the Owner’s Manual for additional mounting
instructions.
NOTE
• Becarefulnottostackthisunitwithanyothercomponents,asvibration
may cause system disruptio n in other c ompon ents.
Owner’s Manual
Continued to the reverse side
© 2013 Yamaha Corporation Printed in Malaysia ZK08370
Connections
Watching TV
1.
Connect the TV and sound bar with the
optical cable (supplied).
Remove the cap of the optical cable and check the
direction of the plug.
2.
Connect the power cable of the sound bar to
an AC wall outlet.
Sound bar
Optical cable
(supplied)
TV
OPTICAL OUTPUT
Optical cable
(commercially available)
3.
Turn on the TV and set the volume to
minimum.
4.
Disable the TV’s built-in speaker output
(if available).
HINT
If a setting to disable the s peaker output is not available on
your TV, you may disable it by c onnec ting headphon es to the
headphone jack on the TV. For details, refer to the instruct ion
manual of the TV.
HINT
If your TV is not equipped with an
optical audio output jack, conne ct your
TV to the ANALOG jack with the RCA
stereo cable (supp lied).
OPTICAL OUTPUT
Set top box or playback device
(such as a Blu-ray Disc
TM
player)
Connect to an AC wall outlet.
Leave the unit powered off until
all connections are complete.
HINT
In the foll owing cases, connect the
optical output of the playback device
to the BD/DVD input of th e sound bar
with an optical c able (com mercially
available), then select the BD/DVD
key on the rem ote control for the input
source.
− The TV does not have an optical
output.
− The TV does not output audio (or
outputs low volum e audio) from the
connected playback device.
− The audio from the playback d evice
connected to the TV cannot be
heard as surround sound.
For details, refer to the Owner’s Manual.
1. Press to turn on the sound bar.
2. Press the TV key to select TV as the input
source.
3. Select the desired input source on the TV.
4. Press the VOLUME (+/-) keys to adjust the
volume.
Playback of a Bluetooth® device
You can connect a Bluetooth device, such as a smartphone or
digital music player, with the sound bar wirelessly. For details,
refer to the Owner’s Manual.
... and more features!
For details about the other useful features, refer to the
Owner’s Manual.
– TV remote control learning function
– TV Remote Repeater
– Clear voice
– UniVolume
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under
license.
Blu-ray Disc is a trademark of the Blu-ray Disc Association.
Loading...