Yamaha 02R96 V2.2 Supplementary Manual
❏
❏
02R96 V2.2 Supplementary Manual
The 02R96 System Software Version 2.20 features the following changes and additions (including the changes made
up to Version 2.11).
Changes and additions in Version 2.20
More Add-On Effects Packages available (pages 155 and 158)
The following Add-On Effects Packages are now available:
• AE041 Surround Post Package
• AE051 Vintage Stomp Package
Due to this addition, effect memories #53 through 67 in the Effects library are now designated as preset effects programs. These preset programs are dedicated to Add-On Effects. The numbers of effects programs that do not have
Add-On Effects installed are grayed out and cannot be used. The following effects programs in the Effects library
have been dedicated to the new Add-On Effects Packages.
No. Preset name Type
62 Room ER ROOM ER
63 Auto Doppler AUTO DOPPLER
64 Field Rotation FLD ROTATION
65 Max100 MAX100
66 Vintage Phaser VNTG PHASER
67 Dual Phaser DUAL PHASER
Please refer to the following Yamaha website for the latest information on the Add-On Effects Packages:
http://www.yamahaproaudio.com
Additional trigger sources in the GPI OUTPUT section (pages 225 and 254)
The following parameters have been added as the trigger signal source in the GPI OUTPUT section.
xxx ON TALLY: The trigger signal is active only while the corresponding channel is turned ON.
The following parameters have been added in the OUTPUT list of the “GPI Trigger Source & Target List” on
❏
page 254.
# Source
254 CH1 ON TALLY
:
309 CH56 ON TALLY
310 BUS1 ON TALLY
:
317 BUS8 ON TALLY
318 AUX1 ON TALLY
:
325 AUX8 ON TALLY
326 ST ON TALLY
About the 02R96 Editor version
If you use the 02R96 Editor (Studio Manager) to control the 02R96, update the 02R96 Editor to version 2.1.2 or
higher (Studio Manager version 2.1 or higher).
If your Studio Manager CD-ROM version is not X5401 B0 , download the latest version from the following Yamaha
website:
http://www.yamahaproaudio.com
EN
Changes in V2.11
Y96K card and MY16-mLAN card support (pages 59 and 299)
The Waves Y96K Plug-in DSP card (supported by Version 2.10) and the MY16-mLAN interface card are now supported. Also, in accordance with the mLAN MIDI specifications, multiple MIDI ports on SLOT 1 have been
changed to a single port. (Now you do not need to select Ports 1-8.)
Please refer to the following website for the latest information on compatible cards, and on the number of cards
that can be installed in combination with other cards.
http://www.yamahaproaudio.com
Changes in V2.10
MIX C-R SOURCES parameter added to
Control Room Monitor (page 137)
A “MIX C-R SOURCES” parameter has been added in the
CONTROL ROOM SETUP page. In V2.0, you could
choose one item from 2TR D1, D2, D3, A1, or A2 as a
monitor source, plus other sources (STEREO, ASSIGN1,
or ASSIGN2). In V2.1, you can turn the MIX C-R
SOURCES parameter off to disable this simultaneous
selection.
MIX MONITOR SOURCES parameter
added to Surround Monitor (page 138)
A “MIX MONITOR SOURCES” parameter has been
added to the SURROUND MONITOR page. In V2.0, you
could simultaneously choose a BUS and SLOT as the
monitor source, but in V2.1 you can turn this parameter
off to disable this simultaneous selection.
❏
❏
❏
Loading...