Yamaha 01V96I Upgrade Guide

Upgrade Guide

This document explains how to upgrade the 01V96i system software to the latest version.

 Precautions (please be sure to read these precautions)

• The user assumes full responsibility for the upgrade.

• Back up important data before upgrading.

• If you fail to follow these instructions properly, or turn off the 01V96i or disconnect the

USB cable while the upgrade is in progress, the 01V96i may be damaged.

• This software is for upgrading the 01V96i system software from a computer via USB.

MIDI drivers other than the Yamaha Steinberg USB driver cannot be used.

• If the upgrade fails while the new system software is being transferred to the 01V96i

due the power being turned off, the USB cable disconnected, etc., when the 01V96i is

turned back on again it will startup in download mode, not normal mode. In this case

you should reconnect the cable and perform the upgrade again.

• If the 01V96i does not work properly after upgrading, and you’ve tried upgrading

several times, please contact your Yamaha dealer.

• This software and its documentation is copyright Yamaha Corporation.

• Reproducing or modifying all or part of this software or its documentation without

permission is strictly prohibited.

• The screen shots in this guide are for use with this upgrade procedure only and may

be different to the actual screen shots.

• Windows is a registered trademark of Microsoft Corporation.

• Apple and Mac are trademarks of Apple Inc., registered in the U.S. and other

countries.

• All other trademarks are the property of their respective holders and are hereby

acknowledged.

01V96i Upgrade Guide

EN

1

Contents of the folder

System software installer

Other files are necessary for installer. (Keep all files on the folder.)

System software installer

Other files are necessary for installer. (Keep all files on the folder.)

 Windows

DMUpgrade.exe

Other files

 Mac

DMUpgrade

Other files

Upgrading the System Software

1. Start the Computer and check to see if the following steps are

complete.

･ Installing the Yamaha Steinberg USB Driver in the computer

･ Connecting the computer and the 01V96i using a USB cable

･ Backing up the data in the user memories in the 01V96i

NOTE: Before starting the upgrade program, quit all other programs. While the upgrade is in progress, do

not start any other programs or switch between windows.

NOTE: If your computer enters Sleep or Energy Save mode, data transfer to the 01V96i may stop, so

disable these functions to prevent this from happening.

NOTE:

Do not connect any USB devices other than the 01V96i, USB mouse or USB keyboard. Connect the

01V96i directly to a USB port on your PC, not via a USB hub

.

2. While pressing and holding down the [CLEAR] button on the

01V96i, turn on the power.

･Continue holding down the [CLEAR] button until “FLASH UPDATE” appears on the

display.

01V96i Upgrade Guide

2