Yaesu FT3DE, FT3DR User Manual

12/19/19

FT3DR/FT3DE Firmware Update Information

Refer to the Firmware Update Instruction Manual in each ZIP file.

The latest versions are listed below with the release date.

 MAIN and SUB Firmware Version 1.02 (12/19/19)

Currently we have two different destination versions of the FT3DR/FT3DE: US A ( DST: USA/ AUS),
EXP (DST: EU/EXP/CHN).

*The firmware version for Japan is different from USA/AUS, EXP versions. Please check the latest
firmware of the Japanese version on the Japan WEB site:

http://www.yaesu.com/jp/amateur_index/index.html.

Please open the Update Instruction Manual and review the information before starting the update
firmware.
To download the zip file “FT3D_USA_Firmware_Update_2019_12.zip” for USA or the zip file
“FT3D_EXP_Firmware_Update_2019_12.zip” for EXP destination versions from YAESU
website files section:

https://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=249&encProdID=8480
7B1262BFED6AC816544D94D310E3&DivisionID=65&isArchived=0

CAUTION:
Please be sure to confirm the model and the version of your transceiver before starting the update.
Writing incorrect firmware to the transceiver may cause abnormal operation or failure.

FT3DR/FT3DE MAIN and SUB Ver. 1.02

• B band Information edited using ADMS-11 software, is now entered properly.

• 2GB microSD cards are now properly recognized.

• Other improvements and optimizations were made.

If you already have Main and Sub v1.02 firmware versions, it is not necessary to update the
FT3DR/FT3DE again.

We hope this new firmware will increase your enjoyment of the FT3DR/FT3DE. Thank you for
choosing Yaesu radios. If you have any problems or questions, please contact Yaesu Amateur
Tech Support [e-mail]

.

Yaesu USA | 6125 Phyllis Drive | Cypress, CA 90630 | 714.827-7600 | FAX: [phone]

http://www.yaesu.com