XPiQ inc PMP55-24, PMP55-25, PMP55-31, PMP55-32, PMP55-11 Datasheet
...
XPiQ inc.
Intelligent Design Quality Product
Medical Switching Power Supply
55 Watts
PMP55 Series
Specification
All specifications typical at nominal line, full load and 25°C
Input
Input Voltage • 85-264 VAC
Input Frequency • 47 to 440 Hz
Input Current • 1.50A (rms) for 115 VAC
0.90A (rms) for 230 VAC
Safety Ground • 50µA max. at 110 VAC 60 Hz
Leakage Current • 100µA max. at 240 VAC 50 Hz
Output
Total Output Power • 0-55 watts
Ripple and Noise • 1% peak to peak max.
Overvoltage • Provided on output #1 only
Protection set at 112-132% of its nominal
output voltage
Overcurrent • All outputs protected to short
Protection: circuit conditions
Temperature • All outputs ±0.04%/°C
Coefficient: maximum
Transient Response • Maximum excursion of 4% or
better on all models. Recovers
to 1% of final value within
500µs after a 25% step load
change
•
CE Marked - LVD & EMC
•
Universal Input
•
100% Burn-In
•
Low Leakage Current
•
4000 VAC Isolation
•
Input Surge Protection
•
Line & Neutral Fused
General
Efficiency • 70% minimum, single outputs
Hold-up time • 10 msec minimum at 115 VAC
Line Regulation • ±0.5% maximum at full load
Inrush Current • 15 amps at 115 VAC or
Withstand Voltage • 4000 VAC from input to output
65% minimum, all other models
30 amps at 230 VAC at 25°C
cold start
1500 VAC from input to ground
500 VAC from output to ground
Environmental
Operating • 0°C to +70°C*
Temperature
Storage • -40°C to +85°C
Temperature
Relative Humidity • 5% to 95% non-condensing
MTBF • 100,000 hours minimum at full load
EMI Requirement • Meets conducted and radiated
Safety Requirements • Approved to: (not for patient contact)
at 25°C ambient
limits of EN 55011 (CISPR11) Class B
a) UL 2601
b) CSA C22.2 No. 601.1-M90 per CUL
c) IEC 601-1/EN60601-1
•
www.XP-iQ.com
* Derate linearly from 100% load at 50°C to 50% load at 70°C
•
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xp-iq.com
Holliston, MA 01746 USA
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xp-iq.com
Holliston, MA 01746 USA
www.XP-iQ.com
Mechanical Details
Model Output #1 Output #2 Output #3 Maximum
Output
Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Power
PMP55-10 5V 0A 8.0A 5% 40W
PMP55-10-1 7V 0A 7.5A 5% 45W
PMP55-11 10V 0A 5.0A 5% 50W
PMP55-12 12V 0A 4.6A 5% 55W
PMP55-13 15V 0A 3.7A 3% 55W
PMP55-13-1 18V 0A 3.1A 3% 55W
PMP55-14 24V 0A 2.3A 3% 55W
PMP55-16 30V 0A 1.9A 3% 55W
PMP55-17 36V 0A 1.6A 3% 55W
PMP55-18 48V 0A 1.2A 3% 55W
PMP55-23 +5V 1A 5.0A 5% +12V 0.5A 3.0A 5% 45W
PMP55-24 +5V 1A 5.0A 5% +15V 0.4A 2.5A 5% 45W
PMP55-25 +5V 1A 5.0A 5% +24V 0.3A 2.0A 5% 45W
PMP55-31 +5V 1A 5.0A 5% +12V 0.5A 3.0A 5% –12V 0.1A 0.5A 10% 45W
PMP55-32 +5V 1A 5.0A 5% +15V 0.4A 2.5A 5% –15V 0.1A 0.5A 10% 45W
OUTPUT VOLTAGE & CURRENT RATINGS PMP 55
Model PIN 1 2 3 4 5
PMP55-10 PMP55-10-1
PMP55-11 PMP55-12 Return Return Output#1 Return Output#1
PMP55-13 PMP55-13-1
PMP55-14 PMP55-16
PMP55-17 PMP55-18
PMP55-23 PMP55-24 Common Common Output#1 Common Output#2
PMP55-25 Return Return Return
PMP55-31 PMP55-32 Common Common Output#1 Output#3 Output#2
Return Return
Pin Chart
* AMP Receptacle No. 212044-1 or Equivalent
(alternate connectors available).
Loading...