XPiQ inc PMP130-12, PMP130-13, PMP130-13-1, PMP130-14, PMP130-16 Datasheet

...
AC/DC Medical Desktop
130 Watts
PMP130 Series
Specification
All specifications typical at nominal line, full load and 25°C
Input
Input Voltage 85-130 VAC or 180 to 264 VAC
auto ranging Input Frequency 47 to 63 Hz Input Current 3.0 A (rms) for 115 VAC
1.7 A (rms) for 230 VAC Safety Ground 50 µA max at 110 VAC 60 Hz Leakage Current 100 µA max at 240 VAC 50 Hz
Output
Total Output Power See Tables Ripple and Noise 1% pk-pk max Overvoltage Set at 112-132% of its nominal
Protection output voltage Overcurrent Output protected to short Protection: circuit conditions
Temperature ±0.04%/°C Coefficient:
Transient Response Maximum excursion of 4% or
better on all models. Recovers to 1% of final value within 500 µs after a 25% step load change
Remote Sense Optional, please consult factory
XPiQ inc.
Intelligent Design Quality Product
General
Efficiency 70% minimum Hold-up time 10 msec minimum at 110 VAC Line Regulation ±0.5% maximum at full load Inrush Current 15 A at 115 VAC or
Withstand Voltage 4000 VAC from input to output
Insulation Resistance • 10 Mohm minimum from
Switching Frequency • 60 kHz to 75 kHz
Environmental
Operating 0 °C to +70 °C, derate linearly from Temperature 100% load at +50 °C to 50% load
Storage -40 °C to +85 °C Temperature
Relative Humidity 5% to 95% non-condensing MTBF 100,000 hours minimum at full load
EMC & Safety
EMI Requirements In compliance with radiated and
Safety Requirements • Approved to: (not for patient contact)
CE Marked - LVD & EMC
Universal Input
100% Burn-In
Low Leakage Current
4000 VAC Isolation
Input Surge Protection
Line & Neutral Fused
30 A at 230 VAC at +25°C cold start
1500 VAC from input to ground 500 VAC from output to ground
output to ground
at +70 °C
at +25 °C ambient
conducted limits of CISPR 11 (EN 55011) Class B
a) UL 2601 b) CSA C22.2 No. 601.1 c) IEC 601-1/EN60601-1
www.XPiQ.com
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xpiq.com
Holliston, MA 01746 USA
OUTPUT VOLTAGE & CURRENT RATINGS PMP130
Maximum Output Model
Output Power Vnom Imin Imax Tol. Number
130 W 12 V 0 A 10.8 A 5% PMP130-12 130 W 15 V 0 A 8.6 A 4% PMP130-13 130 W 18 V 0 A 7.2 A 4% PMP130-13-1 130 W 24 V 0 A 5.4 A 3% PMP130-14 130 W 30 V 0 A 4.3 A 3% PMP130-16 130 W 36 V 0 A 3.6 A 2% PMP130-17 130 W 48 V 0 A 2.7 A 2% PMP130-18
Pin Chart
Model 1 2 3 4 5 6 7 8
All Models Return Return Output Return Output Return Output Output
+V +V +V +V
Mechanical Details
NOTES:
1. Dimensions shown in inches (mm).
2. Tolerance 0.02 (0.5) maximum.
3. Optional output connectors available.
4. Optional ON/OFF switch available.
www.XPiQ.com
*AMP Receptacle No. 212047-1 or Equivalent
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xpiq.com
Holliston, MA 01746 USA
Rev 1.0
Loading...