XPiQ inc PMP110-23, PMP110-31, PMP110-32, PMP110-40, PMP110-41 Datasheet

AC/DC Medical Desktop

110 Watts

PMP110 Series

Specification

All specifications typical at nominal line, full load and 25°C

Input

Input Voltage • 85-264 VAC
Input Frequency • 47 to 440 Hz
Input Current • 3.20 A (rms) for 115 VAC

0.90 A (rms) for 230 VAC
Safety Ground • 50 µA max at 110 VAC 60 Hz
Leakage Current • 100 µA ma. at 240 VAC 50 Hz

Output

Total Output Power • 0-110 watts
Ripple and Noise • 1% pk-pk max
Overvoltage • Provided on output #1 only

Protection set at 112-132% of its nominal

output voltage
Overcurrent • All outputs protected to short
Protection: circuit conditions

Temperature • ±0.04%/°C
Coefficient:

Transient Response • Maximum excursion of 4% or

better on all models. Recovers

to 1% of final value within

500 µs after a 25% step load

change

XPiQ inc.

Intelligent Design Quality Product

•

General

Efficiency • 65% minimum
Hold-up time • 12 msec minimum at 115 VAC
Line Regulation • ±0.5% maximum at full load
Inrush Current • 15 A at 115 VAC or

Withstand Voltage • 4000 VAC from input to output

Environmental

Operating • 0 °C to +70 °C, derate linearly from
Temperature 100% load at +50 °C to 50% load

Storage • -40 °C to +85 °C
Temperature

Relative Humidity • 5% to 95% non-condensing
MTBF • 100,000 hours minimum at full load

EMC & Safety

EMI Requirement • Meets conducted and radiated

Safety Requirements • Approved to: (not for patient contact)

CE Marked - LVD & EMC

•

Universal Input

•

100% Burn-In

•

Low Leakage Current

•

4000 VAC Isolation

•

Input Surge Protection

•

Line & Neutral Fused

30 A at 230 VAC at +25°C
cold start

1500 VAC from input to ground
500 VAC from output to ground

at +70 °C

at +25 °C ambient

limits of EN 55011 (CISPR11) Class B

a) UL 2601
b) CSA C22.2 No. 601.1-M90 per CUL
c) IEC 601-1/EN60601-1

•

www.XPiQ.com

PH: 508 429.9883

FAX: [phone]

Email: [e-mail]

Holliston, MA 01746 USA

•

OUTPUT VOLTAGE & CURRENT RATINGS PMP110

Output #1 Output #2 Output #3 Output #4 Model

Vnom Imin Imax Tol. Vnom Imin Imax Ipeak Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Number

+5 V 0 A 10 A 5% +12 V 0 A 5 A 9.0 A 5% PMP110-23
+5 V 0 A 10 A 5% +12 V 0 A 5 A 9.0 A 5% -12 V 0 A 1 A 5% PMP110-31
+5 V 0 A 10 A 5% +15 V 0 A 4 A 7.5 A 5% -15 V 0 A 1 A 5% PMP110-32
+5 V 0 A 10 A 5% +12 V 0 A 5 A 9.0 A 5% -12 V 0 A 1 A 5% -5 V 0.0 A 1 A 5% PMP110-40
+5 V 0 A 10 A 5% +15 V 0 A 4 A 7.5 A 5% -15 V 0 A 1 A 5% +24 V 0.0 A 1 A 5% PMP110-41
+5 V 0 A 10 A 5% +12 V 0 A 5 A 9.0 A 5% -12 V 0 A 1 A 5% +12 V 0.0 A 1 A 5% PMP110-42
+5 V 0 A 10 A 5% +12 V 0 A 5 A 9.0 A 5% -12 V 0 A 1 A 5% +24 V 0.0 A 1 A 5% PMP110-45
+5 V 2 A 10 A 5% +12 V 0 A 5 A 9.0 A 5% –12 V 0 A 1 A 5% +24 V 1.5 A 3 A 10% PMP110-45-1
+5 V 0 A 10 A 5% +24 V 0 A 3 A 5.0 A 5% –12 V 0 A 1 A 5% +12 V 0.0 A 1 A 5% PMP110-45-2
+5 V 0 A 10 A 5% +15 V 0 A 4 A 7.5 A 5% –15 V 0 A 1 A 5% -5 V 0.0 A 1 A 5% PMP110-46

Note

Peak output current with 10% maximum duty cycle for less than 60 seconds. Total peak power must not exceed 130 Watts.

•

Pin Chart

Model 1 2 3 4 5 6 7 8

PMP110-23 Common N.C. Output#1 N.C. Output#2 Common Output#1 P.F.D.

PMP110-31 PMP110-32 Common Output#3 Output#1 N.C Output#2 Common Output#1 P.F.D.

PMP110-40 PMP110-41 Common Output#3 Output#1 Output#4 Output#2 Common Output#1 P.F.D.
PMP110-42 PMP110-45 Return Return
PMP110-45-1 PMP110-45-2
PMP110-46

Return Return

Return Return

Mechanical Details

DC FAN

48.0 (1219.0)

*

DC OUTPUT
8-PIN DIN PLUG

NOTE:

1. Dimensions shown in inches (mm).

2. Tolerance 0.02 (0.5) maximum.

3. Optional output connectors available.

4. Optional ON/OFF switch available.

5. Weight: 1.35 kg.

10.0 (254.0)

6.5 (165.1)

5.0 (127.01)

2.7 (68.58)

RUBBER FOOT

*AMP Receptacle No. 212047-1 or Equivalent

OPTIONAL
ON/OFF SWITCH

3.75 (95.3)

AC INPUT
IEC 320 INLET

www.XPiQ.com

PH: 508 429.9883

FAX: [phone]

Email: [e-mail]

Holliston, MA 01746 USA