Xerox Phaser 3500 Administrator Guide

Office Printers

P h a s e r® 6 3 0 0 / 6 3 5 0 c o l o r l a s e r p r i n t e r

P h a s e r

8 5 0 0 / 8 5 5 0 c o l o r p r i n t e r

System

Administrator

Guide

www.xerox.com/office/support

Copyright © 2005 Xerox Corporation. All Rights Reserved. Unpublished rights reserved under the copyright laws of the United States. Contents of this publication may not be reproduced in any form without permission of Xerox Corporation.

Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc.

XEROX

, The Document Company®, the digital X®, CentreWare®, Phaser®, PhaserShare®, PhaserSMART®, and Walk-Up

™

are trademarks of Xerox Corporation in the United States and/or other countries.

and PostScript® are trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Adobe

Apple

, AppleTalk®, Bonjour™, EtherTalk®, Macintosh®, and Mac OS® are trademarks of Apple Computer, Inc. in the United

States and/or other countries.

is a trademark of Hewlett-Packard Corporation in the United States and/or other countries.

PCL

Windows

, Windows NT®, and Windows Server™ are trademarks of Microsoft Corporation in the United States and/or other

countries.

Sun

, Sun Microsystems™, and Solaris® are trademarks of Sun Microsystems, Incorporated in the United States and/or other

countries.

is a trademark in the United States and other countries, licensed exclusively through X/Open Company Limited.

UNIX

1Overview

Resources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

PrintingScout Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

PhaserSMART Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Using PrintingScout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Using the Web. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Using CentreWare IS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Using a Windows Printer Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Using the Xerox Support Centre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Xerox Support Centre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

2 Network Installation Features

Using a Startup Network Configuration File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

About the Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Configuration File Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Specifying the Location of the Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Printer Driver Installation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Walk-Up Printing Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Walk-Up Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Installation from the Printer’s Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Auto-Configuring Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Discovery Protocols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Multicast DNS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Service Location Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

3 Network Administration Features

Printer Neighborhood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Job Accounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Usage Profile Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Setting Up Usage Profile Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Sending Usage Profile Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Xerox Usage Analysis Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

System Administrator Guide

Contents

Protocol Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

HTTP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

TCP/IP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Port 9100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

LPR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

IPP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Email Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

MaiLinX Remote Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10

MaiLinX Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

EtherTalk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Cloning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

4 Security Features

Basic Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

About Admin and Key User Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

About HTTP, HTTPS, and SSL/TLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

About Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

About Access Control Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Securing the Printer in a High Security Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Setting Up a Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Configuring SSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Configuring Administrator and Key User Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

Configuring the Print Host Access List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Securing the Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

Selecting the Hard Drive Overwrite Security Option . . . . . . . . . . . . . . . . . . . . . . . . 4-10

Selecting the Automatic Removal of Secure, Personal, and Proof Jobs Option. . . . 4-11

Locking the Control Panel Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

Configuring SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

Configuring SNMP for Maximum Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14

Configuring SNMP v1/v2c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15

Configuring SNMP v3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

Configuring the SNMP Access Control List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18

Disabling SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19

System Administrator Guide

Contents

5 Printing Features

Secure, Personal, Proof, and Saved Print Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Specifying Secure, Personal, Proof, and Saved Print Jobs . . . . . . . . . . . . . . . . . . . . . 5-3

Printing or Deleting Secure Print Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Printing or Deleting Personal Print Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Printing or Deleting Proof and Saved Print Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Smart Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Jam Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Paper Tips Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

6Glossary

Terms and Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

A Configuration Card Parameters

General Information Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

PostScript Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-2

PCL Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

USB 2.0 Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-3

Hard Drive Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Network Information Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

PhaserShare Series B Interface for Ethernet Network Parameters . . . . . . . . . . . . . . . . . . . . A-3

EtherTalk Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-4

TCP/IP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-4

DNS Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

SLP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

SSDP Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

NBNS (WINS) Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

Access Control Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

LPR Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

AppSocket (Port 9100) Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

IPP (Internet Printing Protocol) Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

System Administrator Guide

iii

Contents

SNMP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-6

HTTP (CentreWare IS) Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

FTP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

Status Notification Parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

MaiLinX Remote Printing Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7

B Printer Commands

Phaser 6300/6350 PCL Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

Media Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

Media Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3

Input Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4

Phaser 8500/8550 PCL Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5

Media Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5

Media Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6

Input Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-7

Phaser PJL Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8

C Acknowledgements

Index

System Administrator Guide

Overview

This section includes:

■ Resources on page 1-1

■ PrintingScout Alerts on page 1-2

■ PhaserSMART Technical Support on page 1-2

■ Xerox Support Centre on page 1-4

You can obtain information regarding your printer and its capabilities from the following sources.

Resources

Information Source

Setup Guide*

Quick Reference Guide*

User Guide (PDF)*

Advanced Features Guide (PDF)

Videos

Printer Management Tools www.xerox.com/office/pmtools

Knowledge Base www.xerox.com/office/support

PhaserSMART Technical Support. For more information, see PhaserSMART Technical Support on page 1-2.

Technical Support www.xerox.com/office/support

Information about menu selection or error messages on the control panel

Information pages Control panel menu

* Also available on the Support website.

Packaged with printer

Software and Documentation CD-ROM

www.xerox.com/office/support

www.phaserSMART.com

Control panel Help (?) button

System Administrator Guide

1-1

PrintingScout Alerts

PrintingScout is an automated tool that is installed with the Xerox printer driver. It automatically checks the printer status when a print job is sent. If the printer is unable to print a job, PrintingScout automatically displays an alert on the user’s computer screen to let them know that the printer needs attention. The user can click the alert to view instructions explaining how to fix the problem. PrintingScout provides real-time support to users, while eliminating many of the help calls requesting printer support. PrintScouting saves you time for more critical tasks.

PhaserSMART Technical Support

PhaserSMART Technical Support is an automated, internet-based support system that uses the user’s default web browser to send diagnostic information from their printer to the Xerox website for analysis. PhaserSMART Technical Support examines the information, diagnoses the problem, and proposes a solution. If the problem is not resolved with the solution, PhaserSMART Technical Support assists the user in opening a Service Request with Xerox Customer Support.

PhaserSMART provides support to users, while eliminating many of the help calls requesting printer support. PhaserSMART Technical Support saves you time for more critical tasks.

Use one of the following options to access PhaserSMART Technical Support:

■ PrintingScout

■ Web

■ CentreWare IS

■ The printer driver

■ Xerox Support Centre

Using PrintingScout

If PrintingScout displays an alert on your screen, do the following:

1. Click the alert to view instructions explaining how to fix the problem.

2. Follow the instructions on the screen.

Using the Web

To access PhaserSMART Technical Support from the web:

1. Open your browser and go to www.phaserSMART.com

2. Enter your printer’s IP address in the browser window.

3. Follow the instructions on the screen.

System Administrator Guide

1-2

PhaserSMART Technical Support

Using CentreWare IS

To access PhaserSMART Technical Support from CentreWare IS:

1. Launch your web browser.

2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Support.

4. Select the PhaserSMART Diagnostic Tool link.

5. Follow the instructions on the screen.

Using a Windows Printer Driver

To access PhaserSMART Technical Support from your printer driver:

1. Select Start, select Settings, and then select Printers.

2. Right-click the printer name, and then select Properties.

3. Select the Troubleshooting tab.

4. Select the PhaserSMART Technical Support link.

5. Follow the instructions on the screen.

Using the Xerox Support Centre

To access PhaserSMART Technical Support from the Xerox Support Centre:

1. Select one of the following options:

■ Windows: Double-click the Xerox Support Centre icon

on your desktop.

■ Macintosh: Click the Xerox Support Centre icon in the

dock.

2. Select your printer from the Select Printer drop-down list.

3. Select the Troubleshooting tab.

4. Select the Advanced Troubleshooting Resources link.

5. Click the PhaserSMART icon.

See also:

Xerox Support Centre on page 1-4

System Administrator Guide

1-3

Xerox Support Centre

The Xerox Support Centre is a utility that is installed when running the driver installer. It is available for systems with Windows 2000 and later or Mac OS X, version 10.2 and higher.

The Xerox Support Centre appears on the desktop for Windows systems or is placed in the Mac OS X dock. It provides a central location for accessing the following information:

■ User manuals and video tutorials

■ Solutions to troubleshooting problems

■ Printer and supplies status

■ Supplies ordering and recycling

■ Answers to frequently asked questions

■ Default printer driver settings (Windows only)

Note: Xerox recommends that the Xerox driver installer be used to add a printer instead of the

Microsoft Add Printer Wizard. If the Microsoft Add Printer Wizard is used, the Xerox Support Centre is not installed on the PC. Also, the Xerox driver installer installs the Xerox printer driver, enabling users to work more efficiently by accessing printer features and resources to solve simple problems. This eliminates many of the help calls requesting printer support, saving you time for more critical tasks.

To start the Xerox Support Centre utility:

1. Select one of the following options:

■ Windows: Double-click the Xerox Support Centre icon

on your desktop.

■ Macintosh: Click the Xerox Support Centre icon in the

dock.

2. Select your printer from the Select Printer drop-down list.

System Administrator Guide

1-4

Network Installation Features

This chapter includes:

■ Using a Startup Network Configuration File on page 2-2

■ Printer Driver Installation Features on page 2-3

■ Discovery Protocols on page 2-5

See also:

Advanced Features Guide at www.xerox.com/office/support

System Administrator Guide

2-1

Using a Startup Network Configuration File

This section includes:

■ About the Configuration File on page 2-2

■ Configuration File Requirements on page 2-2

■ Specifying the Location of the Configuration File on page 2-2

About the Configuration File

To configure printer settings or to perform other tasks, such as loading fonts, color tables, and job patches, you can create a startup network configuration file. Every time the printer is turned on or reset, the TFTP service on the TFTP server downloads the configuration file once an IP address is acquired and confirmed in the printer. The TFTP service processes the data in the configuration file as if it were a standard print job.

Configuration File Requirements

The configuration file must be:

■ A valid PostScript or PCL file that contains the appropriate PostScript, PCL, or PJL

commands. For a list of the Xerox-unique PCL and PJL commands, see Printer

Commands on page B-1.

■ Stored on a TFTP server that the printer can access over the TCP/IP network.

Specifying the Location of the Configuration File

To specify the location of the configuration file, do one of the following:

■ If the printer is connected to a TCP/IP network in a DHCP/BOOTP environment, use the

DHCP/BOOTP environment.

■ Use DHCP option 66 to specify the TFTP server IP address or hostname.

■ Use DHCP option 67 to specify the pathname of the configuration file.

For information on how to set these parameters, refer to your DHCP or BOOTP server documentation.

■ If the printer is connected to a TCP/IP network in a non-DHCP environment, use

CentreWare Internet Services (IS). On the TCP/IP Settings page, under TFTP Settings, do the following:

■ Enter the TFTP server IP address or hostname in the TFTP Server Name field.

■ Enter the pathname of the configuration file in the Boot File Name field.

For more information, see the CentreWare IS Online Help.

System Administrator Guide

2-2

Printer Driver Installation Features

This section includes:

■ Walk-Up Printing Driver on page 2-3

■ Walk-Up Installation on page 2-3

■ Installation from the Printer’s Hard Drive on page 2-4

■ Auto-Configuring Driver on page 2-4

Walk-Up Printing Driver

The Xerox Walk-Up Printing Driver enables printing from a PC to any Xerox Postscript-enabled printer. This is especially helpful for mobile professionals who travel to multiple locations and need to print to different printers. Instead of installing the printer drivers for each printer, you can download this driver from the web. Although it doesn’t enable access to all printer-specific features, it does enable access to common printing features, such as 2-sided printing.

The driver contains basic features that are common to most of the Postscript-enabled printers, including:

■ Portrait, landscape, and rotated landscape orientations

■ Single-sided or two-sided printing

■ Single or multiple pages per sheet (including booklet printing)

■ Paper or transparency printing

■ Page size selection

Note: For information about Xerox printer driver features that are available with specific

operating systems, see Printer Driver Features in the Advanced Features Guide for your printer at www.xerox/office/support

Walk-Up Installation

The Xerox Installer enables quick and easy installation of the printer driver. The installer is included on the Software and Documentation CD-ROM, supplied with the printer, and is available on the web. When you run the installer, the main screen lists the Xerox printers of that model discovered on the network or connected via USB. You can choose one of the discovered printers, enter the IP address of the desired printer, or use Walk-Up Technology. This technology is especially helpful when there is more than one Xerox printer on the discovered printers list and you don’t know the printer’s IP address. After selecting Walk-Up Techn olog y and clicking the Next button on the main installer screen, you simply walk up to the desired printer and select control panel. The installer connects the computer to the printer, completes the driver installation, and then the printer prints a confirmation page.

Walk-Up Features and then Select for Installation on the

System Administrator Guide

2-3

Printer Driver Installation Features

Installation from the Printer’s Hard Drive

If the printer has an internal hard drive, you can install the printer driver from the hard drive. This is especially useful if you do not have the Software and Documentation CD-ROM.

Note: If the printer doesn’t have a hard drive but is connected to the internet, you can use this

procedure to automatically connect to the web to install the driver.

To install the printer driver either from the hard drive or the web:

1. Launch your web browser.

2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Support.

4. Select Software Installation on the left sidebar.

5. Select the Printer Drivers link.

6. Do one of the following:

■ If you are a Windows user, click Windows Driver Installer to install the driver, and

then click the Install button to install the printer.

■ If you are a Macintosh user, click Macintosh Driver Installer to download the driver.

Auto-Configuring Driver

For a printer connected to a network, the bi-directional communication between the driver and the printer during installation automatically tells the installer the printer’s configuration (N, DN, DX, etc.) and, therefore, whether the printer has certain features, such as duplexing capability, additional trays, or a hard drive. As a result, the controls for settings, such as 2-sided printing, tray selection, and secure printing are displayed or hidden/grayed out, and the mimic shows the correct printer configuration. This driver feature prevents users from making incorrect selections during installation, eliminating many of the help calls requesting printer support.

System Administrator Guide

2-4

Discovery Protocols

This section includes:

■ Multicast DNS on page 2-5

■ Service Location Protocol on page 2-5

Multicast DNS

To change the Multicast DNS (Bonjour) settings:

1. Launch your web browser.

2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Properties.

4. Click the Protocols folder on the left sidebar.

5. Select TCP/IP.

6. If prompted, enter your Admin or Key User name and password.

7. Under DNS Settings, in the Multicast DNS Enable field, select one of the following:

■ On: The printer can respond to Multicast DNS and be automatically discovered on an

IP network by Apple Macintosh OS X technology.

■ Off: The printer cannot be automatically discovered.

8. If you selected On, follow the instructions on the page. For more information, including a

description of the fields, click the Help button in CentreWare IS to view the online help.

9. Click the Save Changes button.

10. If prompted, enter your Admin or Key User name and password.

Service Location Protocol

To change the configuration of the Service Location Protocol (SLP) Service Agent in the printer:

1. Launch your web browser.

2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Properties.

4. Click the Protocols folder on the left sidebar.

5. Select TCP/IP.

6. If prompted, enter your Admin or Key User name and password.

7. Under Service Location Protocol (SLP) Settings, in the SLP Enable field, select On or

Off.

8. If you selected On, follow the instructions on the page. For more information, including a

description of the fields, click the Help button in CentreWare IS to view the online help.

9. Click the Save Changes button.

10. If prompted, enter your Admin or Key User name and password.

System Administrator Guide

2-5

Network Administration Features

This chapter includes:

■ Printer Neighborhood on page 3-2

■ Job Accounting on page 3-3

■ Usage Profile Reports on page 3-4

■ Xerox Usage Analysis Tool on page 3-5

■ Protocol Control on page 3-6

■ Cloning on page 3-13

System Administrator Guide

3-1

Printer Neighborhood

Printer Neighborhood is a tool in CentreWare IS that enables you to search for printers on your network, check their status, and manage them remotely. You can also install, manage, and view printer usage information. Access to the embedded server in each printer enables you to perform other management tasks.

The default printer search mode is Quick Phaser Search, which quickly finds the Phaser printers on your local subnet. To search for all types of printers or to change other defaults, click the Preferences tab.

Note: Javascript is required in order to access and use pages in Printer Neighborhood. If

Javascript is disabled, a warning message is displayed and the pages will not function properly.

To access Printer Neighborhood:

1. Launch your web browser.

2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click the Printer Neighborhood button.

A list of network printers is displayed.

4. To view topics contained in Printer Neighborhood, click Neighborhood Index.

System Administrator Guide

3-2

Job Accounting

The printer stores information about print jobs. This information is stored in a log file, which lists job records. Each job record contains fields such as user name, job name, pages printed, job times, and toner or ink used. Not all fields are supported by all printers. For more information about the fields supported, go to the CentreWare IS Online Help or CentreWare Web Online Help.

The job accounting values reported also vary depending on the protocol and print command used when each job was printed. For example, using Windows via the default standard TCP/IP port with the Xerox recommended PostScript driver specific to your model provides the printer with the most information about the job being printed. When using other drivers with various protocols, the operating system may enter unexpected information in certain fields, such as a job name listed as LST: or LST:BANNER.

The log file is stored either in the printer’s RAM memory or on the hard drive if one is installed in the printer. Xerox recommends that a hard drive be used for job accounting.

■ With a hard drive, the printer can store information about 5000 print jobs. The data in the

log file is saved when the printer is turned off or reset.

■ Without a hard drive, the printer can store information about the most recent 50 to 500

print jobs depending on available RAM. The data in the log file is not saved when the printer is turned off or reset.

Note: Data in job accounting records may be a security risk because the names of users, as

well as the titles, date, time, and length of printed jobs can be exposed. The content of print job pages is not stored in the job accounting system.

Job accounting is available through CentreWare IS and CentreWare Web.

To access job accounting information using CentreWare IS:

1. Launch your web browser.

2. Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Jobs.

The Job Accounting Links page provides links that enable you to browse, download, and clear job accounting records. For complete information on CentreWare IS job accounting, including clearing job information, downloading job information to a file, and job accounting file formats, click the Help button in CentreWare IS to view the online help.

To access CentreWare Web, go to www.xerox.com/office/pmtools

System Administrator Guide

3-3

Usage Profile Reports

The printer generates reports accessible through CentreWare IS that detail device usage. Usage profile reports track multiple items, including:

■ Printer information, such as printer name, date installed, total pages printed, options

installed, and network ID.

■ Supplies usage data, such as toner or ink. By tracking supplies usage, you can order

supplies before they reach their end of life.

■ Media and tray information, such as how often prints are made on paper compared to

transparencies, and how often each tray is used.

■ Job characteristics, such as size and timing of jobs.

Setting Up Usage Profile Reporting

To set up usage profile reporting:

1. Launch your web browser.

2. Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Jobs.

4. Select Usage Profile Reports on the left sidebar.

5. Click the Usage Profile Properties link. Follow the instructions on the page to set up

reports. For more information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

6. Click the Save Changes button.

Sending Usage Profile Reports

To send a usage profile report:

1. Launch your web browser.

2. Enter the printer’s IP address in your browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Jobs.

4. Select Usage Profile Reports on the left sidebar.

5. Enter the desired email address in the Send to Specific Address field.

6. Click the Send Usage Profile Report button.

Note: To send usage profile reports using email, MaiLinX must be properly set up. See

MaiLinX Remote Printing on page 3-10.

System Administrator Guide

3-4

Xerox Usage Analysis Tool

The Xerox Usage Analysis Tool enables you to collect and analyze enterprise-wide Xerox network printer usage data with customizable features:

■ Cost Analysis: Track printing costs by groups of users or by groups of printers.

■ Print Job Analysis: Analyze print jobs to review media type, color coverage, paper

source, and other job specifics. Plan your next consumable order based on prior usage.

■ Printer Usage Analysis: Track printer usage patterns to identify printers that are

underworked or overused.

■ Reports: Collect and present printer data in a number of formats with complete

transaction and summary reports designed for Excel or other custom billing systems.

For complete information about using the Xerox Usage Analysis Tool provided by the application’s online help system, go to www.xerox.com/office/uat

System Requirements

■ IP network

■ Xerox printer with Ethernet interface (optional hard drive recommended)

■ Xerox Usage Analysis Tool client:

■ A PC with an Intel Pentium III processor or higher, at least 128 MB of RAM, and at

least 500 MB of hard drive space recommended.

■ Operating systems supported: Windows 2000 Professional or later and Windows XP

or later.

■ Xerox Usage Analysis Tool server:

■ A PC with an Intel Pentium III processor or higher, at least 256 MB of RAM, and at

least 1 GB of hard drive space recommended.

■ Operating systems supported: Windows 2000 or later, Windows XP or later, and

Windows 2003 server or later.

■ Framework: .NET Framework 1.1 (included with the Xerox Usage Analysis Tool)

System Administrator Guide

3-5

Protocol Control

This section includes:

■ HTTP on page 3-6

■ TCP/IP on page 3-6

■ Port 9100 on page 3-7

■ LPR on page 3-7

■ IPP on page 3-8

■ SNMP on page 3-8

■ Email Server on page 3-9

■ MaiLinX Remote Printing on page 3-10

■ MaiLinX Alerts on page 3-11

See also:

Discovery Protocols on page 2-5

All network protocols, including network printing, printing services, printer discovery, and management protocols can be enabled or disabled on the printer. If a protocol is enabled, you can set configuration parameters.

Note: To secure protocols, disable any protocols you are not using. This prevents

unauthorized access through applications that use these protocols. For example, if you want to use IPP for a secure printing channel, disable the other printing protocols, Port 9100 and LPR.

HTTP

By default, HTTP is enabled. For information on disabling HTTP, contact Xerox Technical Support at www.xerox/office/support

See also:

About HTTP, HTTPS, and SSL/TLS on page 4-3

TCP/IP

To change TCP/IP settings:

1. Launch your web browser.

2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Properties.

4. Select the Protocols folder on the left sidebar.

5. Select TCP/IP.

6. If prompted, enter your Admin or Key User name and password.

7. In the BOOTP/DHCP box, select one of the following:

■ On: The printer issues BOOTP and DHCP requests on startup.

■ Off: The printer does not issue BOOTP or DHCP requests on startup.

System Administrator Guide

3-6

Protocol Control

8. If you selected Off, follow the instructions in the TCP/IP Settings section to manually

enter the printer’s TCP/IP information.

■ Enter the TFTP server IP address or hostname in the TFTP Server Name field.

■ Enter the pathname of the configuration file in the Boot File Name field.

9. Under DDNS/WINS Settings, in the DDNS box, select one of the following:

■ On: The printer registers its IP name and address so other devices on the network can

refer to it by name.

■ Off: The printer does not register its IP name and address. If DDNS is Off, these

values may be set by BOOTP/DHCP if enabled.

10. If you selected On, follow the instructions in DDNS/WINS Settings to manually enter

settings to identify the printer. For more information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

11. Click the Save Changes button.

12. If prompted, enter your Admin or Key User name and password.

Port 9100

To change Port 9100 settings:

1. Launch your web browser.

2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Properties.

4. Select the Protocols folder on the left sidebar.

5. Select Port 9100.

6. If prompted, enter your Admin or Key User name and password.

7. Select On or Off in the Port 9100 box.

8. If you selected On, follow the instructions on the page to select Port 9100 settings. For

more information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

9. Click the Save Changes button.

10. If prompted, enter your Admin or Key User name and password.

LPR

To change LPR settings:

1. Launch your web browser.

2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Properties.

4. Select the Protocols folder on the left sidebar.

5. Select LPR.

6. If prompted, enter your Admin or Key User name and password.

7. Select On or Off in the LPR box.

System Administrator Guide

3-7

Protocol Control

8. If you selected On, follow the instructions on the page to select LPR settings. For more

information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

9. Click the Save Changes button.

10. If prompted, enter your Admin or Key User name and password.

IPP

To change IPP settings:

1. Launch your web browser.

2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Properties.

4. Select the Protocols folder on the left sidebar.

5. Select IPP.

6. If prompted, enter your Admin or Key User name and password.

7. Select On or Off in the IPP (Internet Printing Protocol) box.

8. If you selected On, follow the instructions on the page to select IPP settings. For more

information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

Note: To configure IPP for secure/encrypted printing, specify a username, password, and

digest authentication (for Windows only). Every client that tries to print to the printer over IPP must enter this information. The user name and password are sent in plain text to the printer. If you specify digest authentication, the password is secured before it is sent to the printer.

9. Click the Save Changes button.

10. If prompted, enter your Admin or Key User name and password.

SNMP

For information on configuring SNMP, see Configuring SNMP on page 4-14.

FTP

To change FTP settings:

1. Launch your web browser.

2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Properties.

4. Select the Protocols folder on the left sidebar.

5. Select FTP.

6. If prompted, enter your Admin or Key User name and password.

7. Select On or Off in the FTP box.

System Administrator Guide

3-8

Protocol Control

8. If you selected On, follow the instructions on the page to select FTP settings. For more

information, including a description of the fields, click the Help button in CentreWare IS to view the online help.

9. Click the Save Changes button.

10. If prompted, enter your Admin or Key User name and password.

Email Server

You can configure email server settings in CentreWare IS by either:

■ Automatically identifying the SMTP email server (recommended).

■ Manually specifying the SMTP email server.

You can also specify a return email address for undelivered email, such as MaiLinX alerts and usage profile reports, to your email address.

To configure email server settings:

1. Launch your web browser.

2. Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Properties.

4. Select the Protocols folder on the left sidebar.

5. Select Email Server.

6. If prompted, enter your Admin or Key User name and password.

7. Do one of the following:

■ To automatically identify the SMTP email server, click the Use DNS to Identify

SMTP Server (Automatic) option, and then enter the Primary Name Server IP Address and the Secondary Name Server IP Address using the 4-byte IP address of

the email server.

■ To manually specify the SMTP email server, click the Specify SMTP Server

Manually option, and then enter the information for the email server. Set the 4-byte IP

address of the SMTP Email Server to send alert notifications. If there is no DNS server, then only the IP Address is allowed.

8. (Optional) To specify an email address for returning undelivered email, enter your email

address in the Return Email Address field.

9. Click the Save Changes button.

10. If prompted, enter your Admin or Key User name and password.

See also:

MaiLinX Alerts on page 3-11 Usage Profile Reports on page 3-4

System Administrator Guide

3-9

Protocol Control

MaiLinX Remote Printing

About MaiLinX Remote Printing

MaiLinX Remote Printing provides the following key features:

■ The ability to send print jobs to a group of printers.

■ Print services across firewalls and proxies.

■ Status reporting using email messages.

MaiLinX Remote Printing consists of two parts:

■ Client software installed on each user’s workstation or PC enables users to send print jobs

from Windows applications to Xerox printers over the Internet. The client software enables users to set up their Internet-connected printers and create groups and subgroups of printers for easy distribution of print jobs.

■ A CentreWare IS Printing Service on a Xerox printer processes the print jobs from the

clients.

System Requirements

■ The client software requires an SMTP-capable email server/forwarder through which the

client software on the user’s computer can send email.

■ Each printer requires an account on a POP3-capable email server from which it can

retrieve email.

Setting Up MaiLinX Remote Printing

To set up your printer for remote printing:

1. Launch your web browser.

2. Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Properties.

4. Select the Protocols folder on the left sidebar.

5. Select Remote Printing.

6. If prompted, enter your Admin or Key User name and password.

7. Set the MaiLinX Remote Printing box to On. Follow the instructions on the MaiLinX

Remote Printing page to set up your printer for remote printing. For more information including a description of the fields, click the Help button in CentreWare IS to view the online help.

System Administrator Guide

3-10

Protocol Control

MaiLinX Alerts

About MaiLinX Alerts

MaiLinX alerts enable the printer to automatically send email to you and/or specified users when the following conditions occur:

■ The printer requires attention or when service is needed.

■ The printer displays an error, warning, or alert.

■ A reply to a MaiLinX Remote Printing message is desired.

For more information, click the Help button in CentreWare IS to view the online help.

Setting Up MaiLinX Alerts

To enable MaiLinX alerts:

1. Launch your web browser.

2. Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

3. Click Properties.

4. Select the General folder on the left sidebar.

5. Select Mail Alerts.

6. If prompted, enter your Admin or Key User name and password.

7. Select On in the MaiLinX (and Usage Profile Properties) box.

8. Follow the instructions on the page to specify up to three users to receive messages:

Admin, Key User, and Service. You can also select advanced settings for:

■ Specifying email server settings.

■ Reading or changing default messages.

■ Reading or changing conditions and trigger settings.

9. Click the Save Changes button.

10. If prompted, enter your Admin or Key User name and password.

System Administrator Guide

3-11

+ 60 hidden pages