Xerox Phaser 3200MFP/B, Phaser 3200MFP/N User Manual

Phaser 3200MFP

User Guide

604E39320

©2007 by Xerox Corporation. All rights reserved.

Copyright protection claimed includes all forms and matters of copyrighted material and information now allowed by
statutory or judicial law or hereinafter granted, including without limitations, material generated from the software
programs which are displayed on the screen, such as icons, screen displays, looks etc.
All Xerox products mentioned in this publication are trademarks of Xerox Corporation. Product names and trademarks of
other companies are hereby acknowled

ged.

The information in this document is correct at the time of publication. Xerox reserves the right at any time to change the
information without notice. Changes and technical updates will be added in subsequent editions of the documentation.
For the latest information go to www.xerox.com.

Table of Contents

Xerox Phaser 3200MFP Table of Contents-1

1 Welcome

About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2

Getting to know your machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3

Component location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3

Control Panel Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5

Special Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7

Customer Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-9

Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-10

WARNING - Electrical Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-11

Laser Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-12

Operational Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-12

Maintenance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-13

Ozone Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-13

For Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-14

Radio Frequency Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-14

Product Safety Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-14

Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-15

CE Mark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-15

For Fax Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-15

Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-19

Illegal Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-20

Product Recycling and Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-23

2 Getting Started

Unpacking the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2

Selecting a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3

Clearance Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3

Installing the Print Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4

Loading Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6

Making Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-8

Switching On the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11

Installing Printer Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-13

Printer Driver Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-14

Changing the Display Language and Country . . . . . . . . . . . . . . . . . . . . . . . .2-15

Setting the Machine ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-15

Entering Characters Using the Number Keypad . . . . . . . . . . . . . . . . . . . . . . .2-16

Setting the Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-17

Changing the Clock Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-18

Changing the Dial Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-19

Setting the Paper Size and Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-19

Setting Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-20

Using the Save Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-21

Using ControlCentre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-22

The Scan Settings Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-23

The Phonebook Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-24

The Printer Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-25

The Firmware Update Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-25

1 Table of Contents

Table of Contents-2 Xerox Phaser 3200MFP

3 Network Setup

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2

Via the control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2

Supported operating systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2

Configuring TCP/IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Dynamic addressing (BOOTP/DHCP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3

Static addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3

Configuring EtherTalk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Restoring the network configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4

Printing a network configuration page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4

Resetting the network interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4

4 Paper Handling

Selecting Print Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

Paper Type, Input Sources, and Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2

Guidelines for Paper and Special Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5

Using the Paper Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Using the Manual Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5

Copy Output Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

5 Copying

Making Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-2

Loading Paper for Copying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-2

Preparing a Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Making Copies on the Document Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Making Copies from the Automatic Document Feeder . . . . . . . . . . . . . . . . . . .5-4

Selecting Copy Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-5

Basic Copy Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Special Copy Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7

Copy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

Changing the Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

Setting the Time Out Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

6 Printing

Installing Printer Software in Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2

Installing Printer Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

Printing a Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-6

Basic Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

Printer Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

Canceling a Print Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-15

Advanced Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-16

Printing Multiple Pages on One Sheet of Paper (N-Up Printing) . . . . . . . . . .6-16

Printing Posters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-17

Printing a Reduced or Enlarged Document . . . . . . . . . . . . . . . . . . . . . . . . . .6-18

Fitting Your Document to a Selected Paper Size . . . . . . . . . . . . . . . . . . . . . .6-19

Table of Contents

Xerox Phaser 3200MFP Table of Contents-3

Using Watermarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-20

Using Overlays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-23

Sharing the Printer Locally . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-27

Setting Up a Host Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-27

Setting Up a Client Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-27

Using Windows PostScript Driver (Phaser 3200MFP/N Only) . . . . . . . . . . . . . . . . . .6-28

Printer Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-28

Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-29

Using Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-29

Using Status Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-30

Opening the Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-31

Changing the Status Monitor Program Setting . . . . . . . . . . . . . . . . . . . . . . . .6-31

Using Your Printer in Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-32

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-32

Installing the Unified Linux Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-32

Using the Unified Driver Configurator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-35

Configuring Printer Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-39

Printing a Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-40

Scanning a Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-42

Using Your Machine with a Macintosh (Phaser 3200MFP/N only) . . . . . . . . . . . . . . .6-46

Installing Software for Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-46

Setting Up the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-48

Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-49

Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-52

7 Scanning

Scanning Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2

Scanning From the Control Panel to an Application . . . . . . . . . . . . . . . . . . . . .7-2

Scanning Process with TWAIN-enabled Software . . . . . . . . . . . . . . . . . . . . . .7-3

Scanning Using the WIA Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-4

Scanning using a network connection

(Phaser 3200MFP/N only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-5

Changing the settings for each scan job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-9

Changing the default scan settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-9

Enabling network scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-10

Setting up Address Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-10

8 Faxing

Setting Up the Fax System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-2

Changing the Fax Setup options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-2

Available Fax Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-2

Sending a Fax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-4

Loading a Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-4

Adjusting the Document Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-5

Sending a Fax Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-6

Sending a Fax Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-7

Redialing the Last Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-7

Confirming Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-8

Automatic Redialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-8

1 Table of Contents

Table of Contents-4 Xerox Phaser 3200MFP

Receiving a Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9

About Receiving Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9

Loading Paper for Receiving Faxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9

Receiving Automatically in Fax Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-10

Receiving Manually in Tel Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-10

Receiving Automatically in Ans/Fax Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

Receiving Manually Using an Extension Telephone . . . . . . . . . . . . . . . . . . . .8-11

Receiving Faxes Using the DRPD Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11

Receiving Faxes in the Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-12

Automatic Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-13

Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-13

Group Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-14

Searching for a Number in Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16

Printing a Phonebook List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-17

Other Ways to Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-18

Sending Broadcast Faxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-18

Sending a Delayed Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-19

Sending a Priority Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-20

Adding Documents To a Scheduled Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-21

Canceling a Scheduled Fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-22

Additional Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-22

Using Secure Receiving Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-22

Printing Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-23

Using Advanced Fax Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-25

Forwarding faxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-26

Sending a fax from a PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-28

Installing PC-Fax Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-28

9 Maintenance

Clearing the Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-2

Cleaning Your Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3

Cleaning the Outside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-3

Cleaning the Inside . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-3

Cleaning the Scan Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-5

Maintaining the Print Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-6

Print Cartridge Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-6

Expected Cartridge Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-6

Redistributing Print Cartridge Toner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-6

Replacing the Print Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-7

Printing continuously when the Toner Empty Replace Toner message appears 9-8

Setting the Notify Toner Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-8

Cleaning the Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-9

Consumables Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10

Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10

Replacing the ADF Rubber Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11

Table of Contents

Xerox Phaser 3200MFP Table of Contents-5

10 Troubleshooting

Clearing Document Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-2

Input Misfeed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-2

Exit Misfeed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-3

Clearing Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-4

In the Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-4

In the Manual Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-5

In the Fuser Area or Around the Print Cartridge . . . . . . . . . . . . . . . . . . . . . . .10-5

In the Paper Exit Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-6

Tips for Avoiding Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-8

Clearing LCD Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-9

Toner cartridge-related messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-13

Solving Other Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-14

Paper Feeding Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-14

Printing Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-15

Printing Quality Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-18

Copying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-22

Scanning Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-23

Network Scan Problems (Phaser 3200MFP/N Only) . . . . . . . . . . . . . . . . . .10-23

Fax Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-24

Common Windows Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-25

Common PostScript Problems (Phaser 3200MFP/N Only) . . . . . . . . . . . . . .10-26

Common Linux Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-27

Common Macintosh Problems (Phaser 3200MFP/N Only) . . . . . . . . . . . . . .10-30

11 Specifications

General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-2

Scanner and Copier Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-3

Printer Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-4

Facsimile Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-5

Paper Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-6

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6

Supported Sizes of Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-7

Guidelines for Using Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-8

Paper Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-9

Paper Output Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-10

Paper Storage Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-10

Envelopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-11

Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-13

Transparencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-13

1 Table of Contents

Table of Contents-6 Xerox Phaser 3200MFP

1Welcome

Xerox Phaser 3200MFP 1-1

1 Welcome

Thank you for choosing the Xerox Phaser 3200MFP. This product has been
designed for ease of use, but to use your machine to its fullest potential take
some time to read this User Guide.

• About This Guide – page 1-2

• Getting to know your machine – page 1-3

• Control Panel Functions – page 1-5

• Special Features – page 1-7

• Customer Support – page 1-9

• Safety Notes – page 1-10

• Regulatory Information – page 1-15

1Welcome

1-2 Xerox Phaser 3200MFP

About This Guide

This User Guide provides information you need for setting up your machine. It
also provides all the detailed instructions for using your machine as a printer,
scanner, copier and facsimile and information for maintaining and
troubleshooting the machine.

Throughout this User Guide some terms are used interchangeably:

• Paper is synonymous with media.

• Document is synonymous with original.

• Page is synonymous with sheet.

• Xerox Phaser 3200MFP is synonymous with the machine.

The following table offers further information about the conventions used
within this Guide.

Related Information Sources

Information available for the product consists of:

-This User Guide

-The

Quick Install Guide

- The Xerox website http://www.xerox.com

Convention Description Example

Italic Typeface Used to emphasize a word or

phrase. In addition,
references to other
publications are displayed in
Italic typeface.

Xerox Phaser 3200MFP.

Bold Typeface Used to emphasize the

selection of a feature mode or
button.

Select the resolution
required by pressing
Resolution.

Notes Provides additional

information relating to the
procedure.

NOTE: For instructions on

loading paper, refer to
Loading Paper on page 2-6.

Caution Cautions are statements that

may cause mechanical
damage to the machine as a
result of an action.

CAUTION: DO NOT use

organic or strong
chemical solvents or
aerosol cleaners.

Warning Used to alert users to the

possibility of personal injury.

WARNING: This product

must be connected to a
protective earthing
circuit.

1Welcome

Xerox Phaser 3200MFP 1-3

Getting to know your machine

Component location

These are the main components of your machine:

Front View

Document
Guide

Document
Input Tray

Document
Cover

Automatic
Document Feeder

Paper Output
Extension

Document
Output Tray

Manual Tray

Control Panel

Document Glass

Paper Input
Tray

Front Door

Output Tray
(Face Down)

Print Cartridge

1Welcome

1-4 Xerox Phaser 3200MFP

Rear View

EXT. Jack

USB port

NOTE: If your country has a different telephone connection

system, this socket may be blocked.

Power
Switch

AC Power Cord
Connector

Line Jack

Rear Cover

Network port*

* Phaser 3200MFP/N Only

1Welcome

Xerox Phaser 3200MFP 1-5

Control Panel Functions

12 34 5 6 7 8

910

Feature Description

1

Lighten/Darken Adjusts the brightness of the image for the current copy and

e-mail job.

2

Original Type

Selects the document type for the current copy and e-mail job.

3

Reduce/Enlarge Makes the image on the copy smaller or larger than the

original.

Favorite Copy Allows you to use one of the special copy features, such as

Clone, Collation, Auto Fit, ID Card Copy, 2/4 Up (multiple
pages on a sheet), and Poster copying after assigning it. For
details, refer to

Special Copy Features on page 5-7.

Resolution Adjusts the resolution of the documents for the current fax

job.

4

Copy Select to Activate the Copy Mode.

Scan Allows you to access a list of your PC software programs

that an image can be scanned to. You must create the scan
list using the Xerox software (ControlCentre) provided with
this machine. For details see

Using ControlCentre on

page 2-22

Fax Select to Activate the Fax Mode.

5

Displays the special features, current status and prompts
during an operation.

1Welcome

1-6 Xerox Phaser 3200MFP

6

Phone Book Allows you to store frequently-dialed fax numbers and e-mail

addresses in memory or search for stored fax numbers and
e-mail addresses.

Manual Dial Engages the telephone line.

Broadcasting Allows you to send a fax to multiple destinations.

Redial/Pause In Standby mode, redials the last number or in Edit mode,

inserts a pause into a fax number.

7

Number Keypad Dials a number or enters alphanumeric characters for Fax

and Copy functions. Also allows you to edit e-mail
addresses.

8

Stop/Clear Stops an operation at any time.

In Standby mode, clears/cancels the copy options, such as
the brightness, the document type setting, the copy size,
and the number of copies.

9

Start Starts a job.

10

Used to scroll through the available options for the selected
menu items on the display.

Enter Confirms the selection on the display.

Menu Enters Menu mode and scrolls through the menus available.

Exit Sends you back to the upper menu level. Used to Exit menu

functions.

Feature Description

1Welcome

Xerox Phaser 3200MFP 1-7

Special Features

Your new machine is equipped with special features that improve the print
quality. You can:

Print with excellent quality and high speed

• You can print up to

1200 dots per inch

(dpi).

•Up to

24 pages per minute in A4, Letter

.

Paper tray capacity and media recommendations

•

Manual tray

supports one sheet of envelopes, labels, transparencies,

custom-sized materials, postcards and heavy paper.

•

Standard 250-sheet tray

supports standard type and size of paper. Also,

standard tray supports one sheet of special materials.

• 100-sheet output tray supports convenient access.

Create professional documents

•Print

Watermarks

. You can customize your documents with words, such

as “Confidential”. For details, see

Chapter 6, Printing

.

•Print

Posters

. The text and pictures of each page of your document are
enlarged and printed across the sheet of paper and taped together to form
a poster. For details, see

Chapter 6, Printing

.

Save time and money

• Allows you to use the Toner Save mode to save the toner. For details, see
Chapter 6, Printing.

• You can print multiple pages on one single sheet of paper to save paper.

• You can use preprinted forms and letterhead on plain paper.

• This machine automatically

conserves electricity

by substantially

reducing power consumption when not printing.

• This machine meets

Energy Star

guidelines for energy efficiency.

250

1Welcome

1-8 Xerox Phaser 3200MFP

Print in various environments

• You can print in

Windows 98/Me/2000/XP(32/64bit)/2003(32/64bit)/Vista

.

• Compatible with

Linux

and

Macintosh (

Phaser 3200MFP/N only).

• Zoran IPS Emulation* is compatible with PostScript 3 (PS) and enables
PS printing (Phaser 3200MFP/N only).

* Zoran IPS Emulation is compatible with PostScript 3

• © Copyright 1995-2005, Zoran Corporation.
All rights reserved. Zoran, the Zoran logo,
IPS/PS3 and OneImage are trademarks of

Zoran Corporation.

* 136 PS3 fonts

Contains UFST and MicroType from Monotype Imaging Inc.

1Welcome

Xerox Phaser 3200MFP 1-9

Customer Support

If you need assistance during or after product installation, please visit the
Xerox website for online solutions and support:

http://www.xerox.com

If you require further assistance, call our experts at the Xerox Welcome
Center, or contact your local representative. When telephoning please quote

the machine serial number. Use the space below to make a note of the
machine serial number:

# ____________________________________________

The Xerox Welcome Center or local representative telephone number is
provided when the machine is installed. For convenience and future
reference, please record the telephone number in the space below:

Xerox Welcome Center or local representative telephone number:

# __________________________________________________

Xerox US Welcome Center:1-800-821-2797

Xerox Canada Welcome Center:1-800-93-XEROX (1-800-939-3769)

Serial Number

1Welcome

1-10 Xerox Phaser 3200MFP

Safety Notes

Read these safety notes carefully before using this product to ensure you
operate the equipment safely.

Your Xerox product and recommended supplies have been designed and
tested to meet strict safety requirements. These include safety agency
approval, and compliance to established environmental standards. Please
read the following instructions carefully before operating the product and refer
to them as needed to ensure the continued safe operation of your product.

The safety and environment testing and performance of this product have
been verified using Xerox materials only.

WARNING: Any unauthorized alteration, which may include the

addition of new functions or connection of external devices, may impact
the product certification. Please contact your authorized local dealer for
more information

Warning Markings

All warning instructions marked on or supplied with the product should be
followed.

WARNING: This WARNING alerts users to areas of the

product where there is the possibility of personal injury.

WARNING: This WARNING alerts users to areas of the

product where there are heated surfaces, which should not be
touched.

Electrical Supply

This product shall be operated from the type of electrical supply indicted on
the product’s data plate label. If you are not sure that your electrical supply
meets the requirements, please consult your local power company for advice.

WARNING: This product must be connected to a protective

earth circuit.

This product is supplied with a plug that has a protective earth pin.
This plug will fit only into an earthed electrical outlet. This is a safety feature.
To avoid risk of electric shock, contact your electrician to replace the electrical
outlet if you are unable to insert the plug into it. Never use an earthed adapter
plug to connect the product to an electrical outlet that lacks an earth
connection terminal.

1Welcome

Xerox Phaser 3200MFP 1-11

Operator Accessible Areas

This equipment has been designed to restrict operator access to safe areas
only. Operator access to hazardous areas is restricted with covers or guards,
which would require a tool to remove. Never remove these covers or guards.

Maintenance

Any operator product maintenance procedures will be described in the user
documentation supplied with the product. Do not carry out any maintenance
on this product which is not described in the customer documentation.

Cleaning Your Product

Before cleaning this product, unplug the product from the electrical outlet.
Always use materials specifically designated for this product. The use of other
materials may result in poor performance and may create a hazardous
situation. Do not use aerosol cleaners, they may be explosive and flammable
under certain circumstances.

WARNING - Electrical Safety Information

• Only Use the power cord supplied with this equipment.

• Plug the power cord directly into a grounded electrical outlet. Do not use

an extension cord. If you do not know whether or not an outlet is
grounded, consult a qualified electrician.

• Improper connection of the equipment-grounding conductor can result in

electrical shock.

• Do not place this equipment where people might step on or trip on the

power cord.

• Do not override or disable electrical or mechanical interlocks.

• Do not obstruct the ventilation openings.

• Never push objects of any kind into slots or openings on this equipment

• If any of the following conditions occur, switch off the power to the

machine immediately and disconnect the power cord from the electrical
outlet. Call an authorized local service representative to correct the
problem.

– The equipment emits unusual noise or odors.
– The power cord is damaged or frayed.
– A wall panel circuit breaker, fuse, or other safety device has been

tripped.
– Liquid is spilled into the copier/printer.
– The equipment is exposed to water.
– Any part of the equipment is damaged.

1Welcome

1-12 Xerox Phaser 3200MFP

Disconnect Device

The power cable is the disconnect device for this equipment. It is attached to
the back of the machine as a plug-in device. To remove all electrical power
from the equipment, disconnect the power cable from the electrical outlet.

Laser Safety Information

CAUTION: Use of controls, adjustments or performance of procedure

other than those specified herein may result in hazardous light
exposure.

With specific regard to laser safety, the equipment complies with performance
standards for laser product set by government, national and international
agencies as a Class 1 laser product. It does not emit hazardous light, as the
beam is totally enclosed during all phases of customer operation and
maintenance.

Operational Safety Information

To ensure the continued safe operation of your Xerox equipment, follow these
safety guidelines at all times.

Do These:

• Always connect equipment to a correctly grounded power outlet. If in
doubt, have the outlet checked by a qualified electrician.

• This equipment must be connected to a protective earth circuit.

This equipment is supplied with a plug that has a protective earth pin. This
plug will fit only into an earthed electrical outlet. This is a safety feature.
To avoid risk of electric shock, contact your electrician to replace the
electrical outlet if you are unable to insert the plug into it. Never use a plug
that lacks an earth connection terminal to connect the product to an
electrical outlet.

• Always follow all warnings and instructions that are marked on or supplied
with the equipment.

• Always locate the equipment in an area that has adequate ventilation, and
the room for servicing. For minimum dimensions see Clearance Space on
page 2-3.

• Always use materials and supplies specifically designed for your Xerox
equipment. Use of unsuitable materials may result in poor performance.

• Always unplug this equipment from the electrical outlet before cleaning.

Do Not Do These:

• Never use a plug that lacks an earth connection terminal to connect the
product to an electrical outlet.

1Welcome

Xerox Phaser 3200MFP 1-13

• Never attempt any maintenance function that is not specifically described
in this documentation.

• This equipment should not be placed in a built-in installation unless proper
ventilation is provided. Please contact your Authorized local dealer for
further information.

• Never remove covers or guards that are fastened with screws. There are
no operator serviceable areas within these covers.

• Never locate the equipment near a radiator or any other heat source.

• Never push objects of any kind into the ventilation openings.

• Never override or "cheat" any of the electrical or mechanical interlock
devices.

• Never operate the equipment if you notice unusual noises or odors.
Disconnect the power cord from the electrical outlet and contact your local
Xerox Service Representative or Service Provider immediately.

Maintenance Information

Do not attempt any maintenance procedure that is not specifically described
in the documentation that is supplied with your printer.

• Do not use aerosol cleaners. The use of cleaners that are not approved
may cause poor performance of the equipment, and could create a
dangerous condition.

• Use supplies and cleaning materials only as directed in this manual. Keep
all of these materials out of the reach of children.

• Do not remove covers or guards that are fastened with screws. There are
no parts behind these covers that you can maintain or service.

• Do not perform any maintenance procedures unless you have been
trained to do them by an authorized local dealer or unless a procedure is
specifically described in the user manuals.

Ozone Safety Information

This product will produce ozone during normal operation. The ozone
produced is heavier than air and is dependent on copy volume. Providing the
correct environmental parameters as specified in the Xerox installation
procedure will ensure that the concentration levels meet safe limits.

If you need additional information about ozone, please request the Xerox
publication Ozone by calling 1-800-828-6571 in the United States and
Canada. In other markets please contact your authorized local dealer or
Service Provider.

1Welcome

1-14 Xerox Phaser 3200MFP

For Consumables

Store all consumables in accordance with the instructions given on the
package or container.

• Keep all consumables away from the reach of children.

• Never throw toner, print cartridges or toner containers into an open flame.

Radio Frequency Emissions

FCC Information to the User

This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:

– This device may not cause harmful interference, and
– This device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

– Consult the dealer or experienced radio TV technician for help.

NOTE: Change or modifications not expressly approved by the

manufacturer responsible for compliance could void the user's authority to
operate the equipment.

Product Safety Certification

This product is certified by the following Agency using the Safety standards
listed.

This product was manufactured under a registered ISO9001 Quality system.

Agency Standard

Underwriters Laboratories Inc. UL60950-1 1st (2003) (USA/

Canada)

Intertek ETL Semko IEC60950-1 Edition 1 (2001)

1Welcome

Xerox Phaser 3200MFP 1-15

Regulatory Information

CE Mark

The CE mark applied to this product symbolizes Xerox's declaration of
conformity with the following applicable Directives of the European Union as
of the dates indicated:

December 12, 2006: Council Directive 2006/95/EEC amended by Council
Directive 93/68/EEC, approximation of the laws of the member states related
to low voltage equipment.

January 1, 1996: Council Directive 89/336/EEC, approximation of the laws of
the member states related to electromagnetic compatibility.

March 9, 1999: Council Directive 99/5/EC, on radio equipment and
telecommunications terminal equipment and the mutual recognition of their
conformity.

A full declaration of conformity, defining the relevant directives and referenced
standards, can be obtained from your Authorized local dealer.

WARNING: In order to allow this equipment to operate in proximity to

Industrial Scientific and Medical (ISM) equipment, the external radiation
from the ISM equipment may have to be limited or special mitigation
measures taken.

WARNING: Shielded interface cables must be used with this product to

maintain compliance with Council Directive 89/336/EEC.

For Fax Function

USA

FAX Send Header Requirements:

The telephone Consumer Protection Act of 1991 makes it unlawful for any
person to use a computer or other electronic device, including a Fax machine,
to send any message unless such message clearly contains in a margin at the
top or bottom of each transmitted page or on the first page of the transmission,
the date and time it is sent and an identification of the business or other entity,
or other individual sending the message and the telephone number of the
sending machine or such business, other entity or individual. (The telephone
number provided may not be a 900 number or any other number for which
charges exceed local or long distance transmission charges.)

In order to program this information into your FAX machine refer to Setting the
Machine ID – page 2-15 and follow the steps provided. To enter the date and
time, please refer Setting the Date and Time – page 2-17.

1Welcome

1-16 Xerox Phaser 3200MFP

Data Coupler Information:

This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the Administrative Council for Terminal Attachments (ACTA). On
the rear of this equipment is a label that contains, among other information, a
product identifier in the format US:AAAEQ##TXXXX. If requested, this
number must be provided to the Telephone Company.

A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular
plug is provided with this product. It is designed to be connected to a
compatible modular jack that is also compliant. See installation instructions
for details.

You may safely connect the machine to the following standard modular jack:
USOC RJ-11C using the compliant telephone line cord (with modular plugs)
provided with the installation kit. See installation instructions for details.

The Ringer Equivalence Number (or REN) is used to determine the number of
devices that may be connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response to an incoming
call. In most but not all areas, the sum of RENs should not exceed five (5.0).
To be certain of the number of devices that may be connected to a line, as
determined by the total RENs, contact the local Telephone Company. For
products approved after July 23, 2001, the REN for this product is part of the
product identifier that has the format US:AAAEQ##TXXXX. The digits
represented by ## are the REN without a decimal point (e.g., 03 is a REN of

0.3). For earlier products, the REN is separately shown on the label.

If this Xerox equipment causes harm to the telephone network, the Telephone
Company will notify you in advance that temporary discontinuance of service
may be required. But if advance notice isn't practical, the Telephone Company
will notify the customer as soon as possible. Also, you will be advised of your
right to file a complaint with the FCC if you believe it is necessary.

The Telephone Company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of the equipment. If
this happens the Telephone Company will provide advance notice in order for
you to make necessary modifications to maintain uninterrupted service.

If trouble is experienced with this Xerox equipment, for repair or warranty
information, please contact the appropriate service center; details of which are
displayed either on the machine or contained within the user guide. If the
equipment is causing harm to the telephone network, the Telephone
Company may request that you disconnect the equipment until the problem is
resolved.

Repairs to the machine should be made only by a Xerox representative or an
authorized Xerox service agency. This applies at any time during or after the
service warranty period. If unauthorized repair is performed, the remainder of
the warranty period is null and void. This equipment must not be used on party
lines. Connection to party line service is subject to state tariffs. Contact the
state public utility commission, public service commission or corporation
commission for information.

1Welcome

Xerox Phaser 3200MFP 1-17

If your office has specially wired alarm equipment connected to the telephone
line, ensure the installation of this Xerox equipment does not disable your
alarm equipment. If you have questions about what will disable alarm
equipment, consult your Telephone Company or a qualified installer.

CANADA

NOTE: The Industry Canada label identifies certified equipment. This

certification means that the equipment meets certain telecommunications
network protective, operational and safety requirements as prescribed in the
appropriate Terminal Equipment Technical Requirements document(s). The
Department does not guarantee the equipment will operate to the users
satisfaction.

Before installing this equipment, users should ensure that it is permissible to
be connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection.
The customer should be aware that compliance with the above conditions may
not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative
designated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic water
pipe systems, if present, are connected together. This precaution may be
particularly important in rural areas.

CAUTION: Users should not attempt to make such connections

themselves, but should contact the appropriate electric inspection
authority, or electrician, as appropriate.

NOTE: The Ringer Equivalence Number (REN) assigned to each terminal

device provides an indication of the maximum number of terminals allowed to
be connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirement that the
sum of the Ringer Equivalent Numbers of all of the devices does not exceed

5.

1Welcome

1-18 Xerox Phaser 3200MFP

Europe

Certification to 1999/5/EC Radio Equipment &
Telecommunications Terminal Equipment Directive

This Xerox product has been self-certified by Xerox for pan-European single
terminal connection to the analogue public switched telephone network
(PSTN) in accordance with Directive 1999/5/EC.

The product has been designed to work with the national PSTNs and
compatible PBXs of the following countries:

In the event of problems, you should contact your local Xerox representative
in the first instance.

This product has been tested to and is compliant with TBR21, a technical
specification for terminal equipment for use on analogue-switched telephone
networks in the European Economic Area.

The product may be configured to be compatible with other country networks.
Please contact your Xerox representative if it needs to be reconnected to
another country's network.

NOTE: Although this product can use either loop disconnect (pulse) or

DTMF (tone) signaling it is recommended that it is set to use DTMF signaling.
DTMF signaling provides reliable and faster call setup.

Modification, connection to external control software or to external control
apparatus not authorized by Xerox, will invalidate its certification.

Austria

Germany Luxembourg Sweden

Belgium Greece Netherlands Switzerland

Denmark Iceland Norway United Kingdom

France Ireland Portugal

Finland

Italy Spain Czech Republic Poland

Bulgaria Romania Hungary

1Welcome

Xerox Phaser 3200MFP 1-19

Environmental Compliance

USA

ENERGY STAR

As an ENERGY STAR® partner, Xerox Corporation has determined that (the
basic configuration of) this product meets the ENERGY STAR guidelines for
energy efficiency.

The ENERGY STAR and ENERGY STAR MARK are registered United States
trademarks.

The ENERGY STAR Imaging Equipment Program is a team effort between
U.S., European Union and Japanese governments and the office equipment
industry to promote energy-efficient copiers, printers, fax, multifunction
machine, personal computers, and monitors. Reducing product energy
consumption helps combat smog, acid rain and long-term changes to the
climate by decreasing the emissions that result from generating electricity.

Xerox ENERGY STAR equipment is preset at the factory. Your machine will
be delivered with the timer for switching to Power Save Mode from the last
copy/print out, set at 15 minutes. A more detailed description of this feature
together with instructions on changing the default time to suit your work
pattern can be found in the Machine Setup Section of this guide.

Canada

Environmental Choice

Terra Choice Environmental Serviced, Inc. of Canada has verified that this
product conforms to all applicable Environmental Choice EcoLogo
requirements for minimized impact to the environment.

As a participant in the Environmental Choice program, Xerox Corporation has
determined that this product meets the Environmental Choice guidelines for
energy efficiency.

Environment Canada established the Environmental Choice program in 1988
to help consumers identify environmentally responsible products and
services. Copier, printer, digital press and fax products must meet energy
efficiency and emissions criteria, and exhibit compatibility with recycled
supplies. Currently, Environmental Choice has more than 1600 approved
products and 140 licensees. Xerox has been a leader in offering EcoLogo
approved products.

1Welcome

1-20 Xerox Phaser 3200MFP

Illegal Copies

USA

Congress, by statute, has forbidden the reproduction of the following subjects
under certain circumstances. Penalties of fine or imprisonment may be
imposed on those guilty of making such reproductions.

1. Obligations or Securities of the United States Government, such as:

2. Adjusted Compensation Certificates for Veterans of the World Wars.

3. Obligations or Securities of any Foreign Government, Bank, or

Corporation.

4. Copyrighted materials, unless permission of the copyright owner has

been obtained or the reproduction falls within the "fair use" or library
reproduction rights provisions of the copyright law. Further information of
these provisions may be obtained from the Copyright Office, Library of
Congress, Washington, D.C. 20559. Ask for Circular R21.

5. Certificates of Citizenship or Naturalization. (Foreign Naturalization

Certificates may be photographed.)

6. Passports. (Foreign Passports may be photographed.)

Certificates of Indebtedness National Bank Currency

Coupons from Bonds Federal Reserve Bank Notes

Silver Certificates Gold Certificates

United States Bonds Treasury Notes

Federal Reserve Notes Fractional Notes

Certificates of Deposit Paper Money

Bonds and Obligations of certain agencies of the government, such as
FHA, etc

Bonds. (U.S. Savings Bonds may be photographed only for publicity
purposes in connection with the campaign for the sale of such bonds.)

Internal Revenue Stamps. (If it is necessary to reproduce a legal
document on which there is a canceled revenue stamp, this may be done
provided the reproduction of the document is performed for lawful
purposes.)

Postage Stamps, canceled or uncanceled. (For philatelic purposes,
Postage Stamps may be photographed, provided the reproduction is in
black and white and is less than 75% or more than 150% of the linear
dimensions of the original.)

Postal money Orders.

Bills, Checks, or Draft of money drawn by or upon authorized officers of the
United States.

Stamps and other representatives of value, of whatever denomination,
which have been or may be issued under any Act of Congress.

1Welcome

Xerox Phaser 3200MFP 1-21

7. Immigration Papers.

8. Draft Registration Cards.

9. Selective Service Induction Papers that bear any of the following

Registrant's information:

Earnings or Income

Dependency Status

Court Record

Previous military service

Physical or mental condition

Exception: United States military discharge certificates may be
photographed.

10. Badges, Identification Cards, Passes, or Insignia carried by military

personnel, or by members of the various Federal Departments, such as
FBI, Treasury, etc. (unless photograph is ordered by the head or such
department or bureau.)

Reproducing the following is also prohibited in certain states:

Automobile Licenses - Drivers' Licenses - Automobile Certificates of Title.

The above list is not all-inclusive, and no liability is assumed for its
completeness or accuracy. In case of doubt, consult your attorney.

Canada

Parliament, by statute, has forbidden the reproduction of the following
subjects under certain circumstances. Penalties of fine or imprisonment may
be imposed on those guilty of making such reproductions.

1. Current bank notes or current paper money.

2. Obligations or securities of a government or bank.

3. Exchequer bill paper or revenue paper.

4. The public seal of Canada or of a province, or the seal of a public body or

authority in Canada, or of a court of law.

5. Proclamations, orders, regulations or appointments, or notices thereof

(with intent to falsely cause same to purport to have been printed by the
Queen's Printer for Canada, or the equivalent printer for a province).

6. Marks, brands, seals, wrappers or designs used by or on behalf of the

Government of Canada or of a province, the government of a state other
than Canada or a department, board, Commission or agency established
by the Government of Canada or of a province or of a government of a
state other than Canada.

7. Impressed or adhesive stamps used for the purpose of revenue by the

Government of Canada or of a province or by the government of a state
other than Canada.

1Welcome

1-22 Xerox Phaser 3200MFP

8. Documents, registers or records kept by public officials charged with the

duty of making or issuing certified copies thereof, where the copy falsely
purports to be a certified copy thereof.

9. Copyrighted material or trademarks of any manner or kind without the

consent of the copyright or trademark owner.

The above list is provided for your convenience and assistance, but it is not
all-inclusive, and no liability is assumed for its completeness accuracy. In
case of doubt, consult your solicitor.

Other countries

Copying certain documents may be illegal in your country. Penalties of fine or
imprisonment may be imposed on those found guilty of making such
reproductions.

Currency notes

Bank notes and cheques

Bank and government bonds and securities

Passports and identification cards

Copyright material or trademarks without the consent of the owner

Postage stamps and other negotiable instruments

This list is not inclusive and no liability is assumed for either its completeness
or accuracy. In case of doubt, contact your legal counsel.

1Welcome

Xerox Phaser 3200MFP 1-23

Product Recycling and Disposal

If you are managing the disposal of your Xerox product, please note that the
product may contain lead, mercury, perchlorate and other materials whose
disposal may be regulated due to environmental considerations. The presence
of lead, mercury and perchlorate is fully consistent with regulations applicable
at the time that the product was placed on the market. For disposal information,
contact your local authorities. Perchlorate Material - This product may contain
one or more Perchlorate-containing devices, such as batteries. Special
handling may apply.
Please see www.dtxc.ca.gov/hazardouswasteperchlorate

for more information.

Xerox operates an equipment takeback and reuse/recycle program. Contact
your Xerox sales representative ( 1-800-ASK-XEROX ) to determine whether
this Xerox product is part of the program. For more information about Xerox
environmental programs, visit www.xerox.com/environment

or for recycling and
disposal information, contact your local authorities. In the United States, you
may also refer to the Electronic Industries Alliance web site: www.eiae.org

.

European Union

WEEE Directive 2002/96/EC

Some equipment may be used in both a domestic/household and a
professional/business application.

Domestic/Household Environment

Application of this symbol on your equipment is confirmation that you should
not dispose of the equipment in the normal household waste stream.

In accordance with European legislation, end of life electrical and electronic
equipment subject to disposal must be segregated from household waste.

Private households within EU member states may return used electrical and
electronic equipment to designated collection facilities free of charge. Please
contact your local disposal authority for information.

In some member states, when you purchase new equipment, your local
retailer may be required to take back your old equipment free of charge.
Please ask you retailer for information.

Professional/Business Environment

Application of this symbol on your equipment is confirmation that you must
dispose of this equipment in compliance with agreed national procedures.

In accordance with European legislation, end of life electrical and electronic
equipment subject to disposal must be managed within agreed procedures.

Prior to disposal, please contact your local dealer or Xerox representative for
end of life takeback information.

1Welcome

1-24 Xerox Phaser 3200MFP

2 Getting Started

Xerox Phaser 3200MFP 2-1

2 Getting Started

Before you start to use your machine, there are a number of tasks to perform.
Using the instructions provided in this chapter, unpack and setup your
machine.

This chapter includes:

• Unpacking the machine – page 2-2

• Selecting a Location – page 2-3

• Loading Paper – page 2-6

• Making Connections – page 2-8

• Switching On the Machine – page 2-11

• Installing Printer Software – page 2-12

• Using ControlCentre – page 2-22

2 Getting Started

2-2 Xerox Phaser 3200MFP

Unpacking the machine

1. Remove the machine and all accessories from the packing carton. Make

sure that the machine has been packed with the following items:

NOTE: The appearance of the power cord and the telephone line cord may

differ depending on your country’s specifications. The Power Cord must be
plugged into a grounded power socket.

NOTE: The CD-ROMs contain the Xerox printer driver, scan drivers,

software, Network Scan, User Guide, Status Monitor and ControlCentre.

NOTE: Components may differ from country to country. You should use the

telephone line cord which is supplied with your machine. If you are replacing
it with another vendor’s, it should be AWG #26 or larger telephone line cord.

2 Getting Started

Xerox Phaser 3200MFP 2-3

2. Remove the packing tape from the front, back, and sides of the machine.

Selecting a Location

Select a level, stable place with adequate space for air circulation around the
machine. Allow extra space for opening doors and trays.

The area should be well-ventilated and away from direct sunlight or sources
of heat, cold, and humidity. Do not set the machine close to the edge of a desk
or table.

Clearance Space

The diagram shows the space that
should be left around the machine for
access and ventilation.

Tape

2 Getting Started

2-4 Xerox Phaser 3200MFP

Installing the Print Cartridge

1. Open the front door.

2. Remove the Print Cartridge

from its bag and remove the paper
protecting the cartridge by pulling the
packing tape.

3. Thoroughly rock the cartridge 5 or 6

times to distribute the toner. This will
loosen the toner and make sure that
you get the maximum copies from the
cartridge.

NOTE: If toner gets on your clothing, wipe it

off with a dry cloth and wash clothing in cold
water. Hot water sets toner into fabric.

CAUTION: To prevent damage, do not expose the Print Cartridge to

light for more than a few minutes. Cover it with a piece of paper if left
exposed for more than a few minutes.

CAUTION: Do not touch the green underside of the Print Cartridge. Use

the handle on the cartridge when lifting the cartridge to avoid touching
this area.

2 Getting Started

Xerox Phaser 3200MFP 2-5

4. Unfold the Print Cartridge

handle. Hold the handle and
insert the cartridge into the
machine until it snaps into
place.

NOTE: When inserting or

removing the Print Cartridge
take care not to scratch it
against the machine frame. This
will damage the cartridge and
may produce marks on the
copies.

5. Close the front door. If the

door is not firmly closed,
printing errors may occur.

NOTE: When printing text at 5%

coverage, you can expect a print
cartridge life of approximately
2,000/3,000 pages. (1,500
pages for the print cartridge that
is shipped with the machine.)

2 Getting Started

2-6 Xerox Phaser 3200MFP

Loading Paper

The tray can hold a maximum of 250 sheets of 20 lb (75 g/m2) plain paper.

1. Pull the tray toward you to open.

2. Squeeze the rear guide and pull

it out to extend the tray.

3. Fan the edges of the paper stack

to separate the pages. Gently tap
the stack on a flat surface to
even up the edges.

4. Load paper into the tray to

register at the rear, left corner of
the tray. Make sure that all four
corners lay flat in the tray.

NOTE: Do not put too much paper in

the tray. Over filling the tray may
cause paper jams.

2 Getting Started

Xerox Phaser 3200MFP 2-7

5. Squeeze the rear guide and side guide and move them so that they just

touch the edge of the paper stack.

NOTE: Do not push the guides hard

against the paper stack to cause the
stack to bend. If you do not adjust the
paper side guide correctly, paper jams
may occur.

2 Getting Started

2-8 Xerox Phaser 3200MFP

Making Connections

1. Plug one end of the supplied

telephone line cord into the LINE
jack on the machine and the
other end into the telephone wall
socket.

2. Plug the cord of your extension

phone or answering machine into
the EXT. jack.

NOTE: If you want to use your

machine to receive both faxes and
voice calls, you will need to connect
a telephone and/or answering
machine to your machine.

For Users in the UK:

UK users should plug the cord of
the extension phone into the
supplied TAM lead and plug the
cord of the TAM lead into the
EXT. jack on the back of the
machine.

NOTE: Use the TAM lead and the

telephone line cord supplied with
your machine.

In the United Kingdom, if a three-wire
type (SHUNT-wire, older equipment)
telephone or answering machine is

To the wall socket

To an extension phone or
answering machine

TAM lead

2 Getting Started

Xerox Phaser 3200MFP 2-9

connected to the EXT. jack on the machine, the external equipment will fail to
ring when receiving an incoming call as the machine is designed to operate
with the latest technology. To prevent this incompatibility, use two-wire (newer
equipment) telephones or answering machines.

For Users in Germany

For Users in France

2 Getting Started

2-10 Xerox Phaser 3200MFP

3. Connect a USB cable to the USB port on your machine. Connect to the

USB port on your computer.

4. If you want to use a LAN cable, purchase LAN cable and connect it to the

LAN connector on your machine.(Phaser 3200MFP/N only)

2 Getting Started

Xerox Phaser 3200MFP 2-11

Switching On the Machine

1. Plug one end of the supplied

power cord into the AC socket
on the machine and the other
end into a properly grounded AC
outlet.

2. Press the power switch to turn

the machine on. “Warming Up
Please Wait” appears on the
display indicating that the
machine is now on.

To view your display text in
another language, see Changing
the Display Language and
Country – page 2-15.

WARNING: The fusing area

inside the machine is hot. Be careful not to touch hot surfaces when
accessing this area.

CAUTION: Do not disassemble the machine with power on. If you do,

you may receive an electric shock.

To the AC outlet

2 Getting Started

2-12 Xerox Phaser 3200MFP

Installing Printer Software

NOTE: You must install software using the supplied CD-ROM after you have

set up your machine and connected it to your computer. For details, see
Chapter 6, Printing.

The CD-ROM provides you with the following software:

Programs for Windows

To use your machine as a printer and scanner in Windows, you must install
the MFP driver. You can install some or all the following components:

•

Printer driver

- Use this driver to take full advantage of your printer’s

features.

•

Scan driver

- TWAIN and Windows Image Acquisition (WIA) driver is

available for scanning documents on your machine.

•

ControlCentre- Use this program to create phonebook entries and configure

the destination of the scan button. You can also update the firmware of the
machine.

• Status Monitor- This program appears when printing error occurs.

•

Network Scan

: This program allows you to scan a document on your
machine and save it to a network-connected computer
(Phaser 3200MFP/N only).

Macintosh Driver (Phaser 3200MFP/N only)

You can print and scan to and from Macintosh operating systems using your
machine.

Linux Driver

You can print and scan to and from Linux operating systems using your
machine. (Direct and Network)

2 Getting Started

Xerox Phaser 3200MFP 2-13

System Requirements

Your machine supports following operating system.

Windows

98/Me/2000/XP

(32/64bit)/2003(32/64bit)/Vista

The following table shows Windows requirements.

Macintosh 10.3 ~ 10.4 - See Installing Software for Macintosh – page 6-46

Various Linux - See Installing the Unified Linux Driver – page 6-32.

Item Requirements Recommended

CPU Windows 98/Me/2000 Pentium II 400 MHz

or higher

Pentium III 933
MHz

Windows XP(32/64bit)/
2003(32/64bit)/Vista

Pentium III 933 MHz
or higher

Pentium IV 1
GHz

RAM Windows 98/Me/2000 64 MB or higher 128 MB

Windows XP(32/64bit)/
2003(32/64bit)

128 MB or higher 256 MB

Windows Vista 512 MB or higher 1 GB

Free disk
space

Windows 98/Me/2000 300 MB or higher 1 GB

Windows XP(32/64bit)/
2003(32/64bit)

1 GB or higher 5 GB

Windows Vista 15 GB 15 GB or more

Internet
Explorer

Windows 98/Me/2000/
XP(32/64bit)/2003(32/64bit)

5.0 or higher

Windows Vista

7.0 or higher

2 Getting Started

2-14 Xerox Phaser 3200MFP

Printer Driver Features

Your printer drivers support the following standard features:

• Paper source selection

• Paper size, orientation and media type

• Number of copies

The following table lists the features supported by your printer drivers.

NOTE: For details about installing software and using its features, see

Chapter 6, Printing.

Feature

PCL6

PostScript

(Phaser 3200MPF/N only)

Windows Windows Macintosh Linux

Toner Save Y Y N Y

Print quality option Y Y Y Y

Poster printing Y N N N

Multiple pages per
sheet (N-up)

YYYY(2,4)

Fit to page printing Y Y Y N

Scale printing Y Y Y N

Watermark Y N N N

Overlay Y N N N

2 Getting Started

Xerox Phaser 3200MFP 2-15

Changing the Display Language and Country

Setting Language

To change the language that displays on the control panel, follow these steps:

1. Press Menu until “Machine Setup” appears on the top line of the display.

2. Press

the scroll button ( or ) until “Language” appears on the bottom

line of the display.

3. Press Enter. The current setting appears on the bottom line of the

display.

4. Press

the scroll button ( or ) until the language you want appears on

the display.

5. Press Enter to save the selection.

6. To return to Standby mode, press Stop/Clear.

Setting the Machine ID

In some countries, you are required by law to indicate your fax number on any
fax you send. The Machine ID, containing your telephone number and name
(or company name), will be printed at the top of each page sent from your
machine.

1. Press Menu until “Machine Setup” appears on the top line of the display.

The first available menu item, “Machine ID”, displays on the bottom line.

2. Press Enter. The display asks you to enter the fax number.

3. If there is a number already set, the number appears.

4. Enter your fax number using the number keypad.

NOTE: If you make a mistake while entering numbers, press the button to

delete the last digit.

5. Press Enter when the number on the display is correct. The display asks

you to enter an ID.

6. Enter your name or the company name using the number keypad.

7. You can enter alphanumeric characters using the number keypad, and

include special symbols by pressing the 0 button.

8. For details on how to use the number keypad to enter alphanumeric

characters, see Entering Characters Using the Number Keypad – page
2-16.

9. If you want to enter the same letter or number in succession (e.g. SS,

AA, 777), enter one digit, move the cursor by pressing the

button and

enter the next digit.

2 Getting Started

2-16 Xerox Phaser 3200MFP

10. If you want to insert a space in the name, you can also use the button

to move the cursor to skip the position.

11. Press Enter when the name on the display is correct.

12. To return to Standby mode, press Stop/Clear.

Entering Characters Using the Number Keypad

As you perform various tasks, you need to enter names and numbers. For
example, when you set up your machine, you enter your name (or your
company’s name) and telephone number. When you store one or two digit
speed dial or group dial numbers, you may also enter the corresponding
names.

To enter alphanumeric characters:

1. When you are prompted to enter a letter, locate the button

labeled with the character you want. Press the button until
the correct letter appears on the display.

For example, to enter the letter O, press 6, labeled with
“MNO”.

Each time you press 6, the display shows a different letter,
M, N, O, and finally 6.

You can enter special characters, such as space, plus sign, and etc. For
details, see Keypad Letters and Numbers on page 17.

2. To enter additional letters, repeat step 1.

If the next letter is printed on the same button, move the cursor by
pressing the

button and then press the button labeled with the letter you

want. The cursor will move to the right and the next letter will appear on
the display.

You can enter a space by pressing 1 once, and by using the cursor button.

3. When you finish entering letters, press Enter.

2 Getting Started

Xerox Phaser 3200MFP 2-17

Keypad Letters and Numbers

Changing Numbers or Names

If you make a mistake while entering a number or name, press the button to
delete the last digit or character. Then enter the correct number or character.

Inserting a Pause

With some telephone systems, you must dial an access code (9, for example)
and listen for a second dial tone. In such cases, you must insert a pause in the
telephone number.

To insert a pause, press Redial/Pause at the appropriate place while entering
the telephone number. A “−” appears on the display at the corresponding
location.

Setting the Date and Time

When you turn the machine on for the first time, the display prompts you to
enter the current date and time. After entering, it will not appear again.

NOTE: When turning on the machine after it has been off for a long time

(Approx. 72 hours), you need to reset date and time.

1. Press Menu until “Machine Setup” appears on the top line of the display.

2. Press the scroll button ( or ) to display “Date & Time” on the bottom

line and press Enter.

Key Assigned numbers, letters, or characters

1 Space 1

2 A B C 2

3 D E F 3

4 G H I 4

5 J K L 5

6 M N O 6

7 P Q R S 7

8 T U V 8

9 W X Y Z 9

0 . @ _ - + , ‘ / * # & 0

2 Getting Started

2-18 Xerox Phaser 3200MFP

3. Enter the correct time and date using the number keypad.

NOTE: The date format may differ from country to country.

You can also use the scroll button ( or ) to move the cursor under the
digit you want to correct and enter a new number.

4. To select “AM” or “PM” for 12-hour format, press the or button.

5. When the cursor is not under the AM or PM indicator, pressing the or

button immediately moves the cursor to the indicator.

6. You can change the clock mode to 24-hour format (e.g. 01:00 PM as

13:00). For details, see Changing the Clock Mode – page 2-18.

7. Press Enter when the time and date on the display is correct.

8. To return to Standby mode, press Stop/Clear.

Changing the Clock Mode

You can set your machine to display the current time using either a 12-hour or
24-hour format.

1. Press Menu until “Machine Setup” appears on the top line of the display.

2. Press the scroll button ( or ) until you see “Clock Mode” on the bottom

line and press Enter.

3. The clock mode currently set for the machine displays.

4. Press the scroll button ( or ) to select the other mode and then press

Enter to save the selection.

5. To return to Standby mode, press Stop/Clear.

Unit Range

Month 01 - 12

Day 01 - 31

Year Required four digits

Hour 01 - 12 (12 hour mode)

00 - 23 (24 hour mode)

Minute 00 - 59

2 Getting Started

Xerox Phaser 3200MFP 2-19

Changing the Dial Mode

This setting may not be available depending on your country. If you cannot
reach this option, your machine does not support this feature.

You can set the dial mode for your machine to either tone dialling or pulse
dialling. If you have a public telephone system or a private branch exchange
(PBX) system, you may need to select Pulse. Contact your local telephone
company if you are not sure which dial mode to use. If you select Pulse, some
phone system features might not be available. It can also take longer to dial a
fax or phone number.

1. Press Menu until “Machine Setup” appears on the top line of the display.

1. Press the scroll button ( or ) until you see “Dial Mode” on the bottom

line and press Enter.

2. The dial mode currently set for the machine displays.

3. Press the scroll button ( or ) until the desired status appears and press

Enter.

To return to Standby mode, press Stop/Clear.

Setting the Paper Size and Type

After loading paper in the tray, you need to set the paper size and type using
the control panel buttons. These settings will apply to copy and fax modes. For
PC-printing, you need to select the paper size and type in the print driver you
use on your PC.

1. Press Menu. The display shows “Paper Setting” on the top line of the

display.

2. Press the scroll button ( or )

to display “Paper Size” on the bottom line

and press Enter to access the menu item.

3. Use

the scroll button ( or ) to find the paper size you are using and

press Enter to save it.

4. Press the button to scroll to “Paper Type” and press Enter to access

the menu item.

5. Use

the scroll button ( or ) to find the paper type you are using and

press Enter to save it.

6. To return to Standby mode, press Stop/Clear.

2 Getting Started

2-20 Xerox Phaser 3200MFP

Setting Sounds

You can control the following sounds:

• Speaker: You can turn on or off the

sounds from the telephone line through

the speaker, such as the dial tone or a fax tone

. With this option set to

“Comm.” the speaker is on until the remote machine answers.

• Ringer: You can adjust the ringer volume.

• Key Sound: With this option set to “On” a key tone sounds each time a
key is pressed.

• Alarm Sound: You can turn the alarm sound on or off. With this option set
to “On” an alarm tone sounds when an error occurs or fax communication
ends.

• You can adjust the volume level using the Manual Dial button.

Speaker, Ringer, Key Sound, and Alarm Sound

1. Press Menu until “Sound/Volume” appears on the top line of the display.

2. Press the scroll button ( or ) to scroll through the options. Press Enter

when you see the desired sound option.

3. Press the scroll button ( or ) to display the desired status or volume for

the option you have selected.

You will see the selection on the bottom line of the display.

For the ringer volume, you can select “Off”, “Low”, “Med”, and “High”.
Setting “Off” means that the ringer does not sound. The machine works
normally even if the ringer is turned off.

4. Press Enter to save the selection. The next sound option appears.

5. If necessary, repeat steps 2 through 4.

6. To return to Standby mode, press Stop/Clear.

Speaker Volume

1. Press Manual Dial. A dial tone sounds from the speaker.

2. Press the scroll button ( or ) until you hear the volume you want. The

display shows the current volume level.

3. Press Manual Dial to save the change and return to Standby mode.

NOTE: You can adjust the speaker volume only when the telephone line is

connected.

2 Getting Started

Xerox Phaser 3200MFP 2-21

Using the Save Modes

Toner Save Mode

Toner Save mode allows your machine to use less toner on each page.
Activating this mode extends the life of the Print Cartridge beyond what one
would experience in the normal mode, but it reduces print quality.

NOTE: When PC-printing, you can also turn on or off the toner save mode in

the printer properties. For details, see Chapter 6, Printing.

Power Save Mode

Power Save mode allows your machine to reduce power consumption when it
is not in use. You can turn this mode on and select a length of time for which
the machine waits after a job is printed before it switches to a reduced power
state.

1. Press Menu until “Machine Setup” appears on top line of the display.

2. Press the scroll button ( or )

until “Power Save” appears on the bottom

line. Press Enter.

3. Press the scroll button ( or ) to display “On” on the bottom line and

press Enter.

Selecting “Off” means that the power save mode is deactivated.

4. Press the scroll button ( or ) until the time setting you want appears.

The available options are 5, 10, 15, 30, 60 and 120 (minutes).

5. Press Enter to save the selection.

6. To return to Standby mode, press Stop/Clear.

2 Getting Started

2-22 Xerox Phaser 3200MFP

Using ControlCentre

Using ControlCentre, you can create and edit Phonebook entries from your
computer and configure the destination launches when you use the
corresponding button on the control panel. You can also update the firmware
of the machine.

1. To install the Xerox ControlCentre, insert the supplied Xerox Drivers CD.

2. The CD-ROM should automatically run, and an installation window

appears.
If the installation window does not appear, click Start and then Run. Type
X:\Setup.exe, replacing "X" with the letter of your CD-ROM drive and
click OK.

3. When the language selection window appears, select the appropriate

language and then click Continue.

4. Choose ControlCentre (if not already selected) and then click Continue.

5.

At the next screen accept your choice by clicking Continue and then click

Finish

. ControlCentre is now installed.

2 Getting Started

Xerox Phaser 3200MFP 2-23

To open ControlCentre:

1. Start your Windows.

2. Click the Start button on your desktop computer.

3. From the Programs or All Pro-

grams, select your printer driver

name and then ControlCentre.
The ControlCentre window opens.

The ControlCentre window
provides the following tabs: Scan
Settings, Phonebook, Printer,
and Firmware Update.

4. To exit, click the Exit button at the

bottom of each tab.

NOTE: Use the help feature by

referring to the window which appears when you click the Help button.

The Scan Settings Tab

Click the Scan Settings tab to configure the scan destination list. Scan the
image to any of the software programs in the destination list.

You can also configure the scan
settings, such as the output type and
resolution.

Select the program from the

Available Scan Destinations and click

to add it to the Front Panel
Destination List. To delete the selected
program, click .

Restore Defaults

Click to restore the default settings.

Send

Downloads the settings made in the
ControlCentre to your machine.

1

2

3

1

2

3

2 Getting Started

2-24 Xerox Phaser 3200MFP

The Phonebook Tab

Click the tab to configure print system settings.

Read.

Reads the Phonebook entries from the machine for use in the ControlCentre.

Write

Downloads the Phonebook entries from the ControlCentre to the machine.

Phonebook entries.

Edit

Allows you to edit a selected Phonebook entry in a separate Edit window.

Delete

Deletes a selected Phonebook entry.

Delete All

Deletes all Phonebook entries.

Group dial...

Allows you to set up group dial numbers.

When you click Group dial, the following
window opens.

Enter a name for the group

.

Shows the numbers included in the group.
To remove a number, select it and click
Remove.

Shows the Phonebook entries you can
include in the group. Select a number and
click Add to move it to the Included numbers
list.

OK

Click to save the group dial number after adding or removing numbers for the
group.

1

2

3

4

5

6

7

1

2

3

4

5

6

7

1

2

3

4

1

2

3

4

2 Getting Started

Xerox Phaser 3200MFP 2-25

The Printer Tab

Click the tab to configure print system settings.

Orientation

Allows you to select the default orientation of print image on the page.

Margins

Allows you to set the margin of print materials.

PCL Settings

Allows you to set the PCL emulation configuration.

Apply

Downloads the settings made in the ControlCentre to your machine.

The Firmware Update Tab

Click the Firmware Update tab to
update the firmware of your machine.

1

2

3

4

1

2

3

4

2 Getting Started

2-26 Xerox Phaser 3200MFP

3 Network Setup

Xerox Phaser 3200MFP 3-1

3 Network Setup

Connecting your machine to a network is available only on the
Phaser 3200MFP/N. This chapter gives you step-by-step instructions for
setting up your machine for network connections.

This chapter includes:

• Introduction – page 3-2

• Supported operating systems – page 3-2

• Configuring TCP/IP – page 3-3

3 Network Setup

3-2 Xerox Phaser 3200MFP

Introduction

Once you have connected your machine to a network with an RJ-45 Ethernet
cable, you can share the machine with other network users.

You need to set up the network protocols on the machine to use it as your
network printer. Protocols can be set up by the following method:

Via the control panel

You can set up the following basic network parameters through the machine’s
control panel:

• Configure TCP/IP

• Configure EtherTalk

Supported operating systems

The following table shows the network environments supported by the
machine:

• TCP/IP: Transmission Control Protocol/Internet Protocol

• DHCP: Dynamic Host Configuration Protocol

• BOOTP: Bootstrap Protocol

Item Requirements

Network interface • 10/100 Base-TX

Network
operating system

• Windows 98/Me/NT 4.0/2000/XP(32/64bit)/2003(32/
64bit)/Vista

• Various Linux OS (refer to Installing the Unified Linux
Driver on page 32)

• Macintosh OS 10.3~10.4

Network
protocols

• TCP/IP on Windows

• EtherTalk

Dynamic
addressing server

• DHCP, BOOTP

3 Network Setup

Xerox Phaser 3200MFP 3-3

Configuring TCP/IP

Your machine can be set up with a variety of TCP/IP network information, such
as an IP address, a subnet mask, and a gateway. There are several ways in
which your machine can be assigned a TCP/IP address, depending on your
network.

• Dynamic addressing via BOOTP/DHCP (default): A TCP/IP address is
assigned automatically by the server.

• Static addressing: A TCP/IP address is assigned manually by the system
administrator.

NOTE: Before configuring TCP/IP, you need to set the network protocol to

TCP/IP.

Dynamic addressing (BOOTP/DHCP)

To have a TCP/IP address assigned automatically by the server, take the
following steps:

1. Press Menu until Network Setup appears on the top line of the display.

2. Press the scroll button ( or ) until "Config Network" appears and press

Enter.

3. Press Enter when "TCP/IP" appears.

4. Press the scroll button ( or ) until "DHCP" or "BOOTP" appears and

press Enter.

5. Press Stop/Clear to return to Standby mode.

Static addressing

To enter a TCP/IP address from your machine’s control panel, take the
following steps:

1. Press Menu until "Network Setup" appears on the top line of the display.

2. Press the scroll button ( or ) until "Config Network" appears and press

Enter.

3. Press Enter when "TCP/IP" appears.

4. Press Enter when "Manual" appears.

5. Press Enter when "IP Address" appears.

6. Enter a byte between 0 and 255 using the number keypad and press the

scroll button ( or ) to move between bytes.

7. Repeat this to complete the address from the 1st byte to the 4th byte.

8. When you have finished, press Enter.

3 Network Setup

3-4 Xerox Phaser 3200MFP

9. Repeat steps 6 and 7 to configure the other TCP/IP parameters: subnet

mask and gateway address.

10. Press Stop/Clear to return to Standby mode.

Configuring EtherTalk

EtherTalk is AppleTalk used in an Ethernet network. This protocol is widely
used in Macintosh network environments. To use EtherTalk, take the following
steps:

1. Press Menu until "Network Setup" appears on the top line of the display.

2. Press the scroll button ( or ) until "Config Network" appears and press

Enter.

3. Press the scroll button ( or ) until "EtherTalk" appears and press

Enter.

4. Press the scroll button ( or ) until "On" appears and press Enter.

5. Press Stop/Clear to return to Standby mode.

Restoring the network configuration

You can return the network configuration to its default settings.

1. Press Menu until "Network Setup" appears on the top line of the display.

2. Press the scroll button ( or ) until "Set To Default" appears and press

Enter.

3. Press Enter when "Yes" appears to restore the network configuration.

4. Power the machine off and back on.

Printing a network configuration page

The network configuration page shows how the network interface on your
machine is configured.

1. Press Menu until "Network Setup" appears on the top line of the display.

2. Press the scroll button ( or ) until "Print Net CFG" appears and press

Enter.

3. Press Enter when "Yes" appears.

The network configuration page prints out.

Resetting the network interface

You can reset the embedded network interface when a network problem
occurs.

1. Press Menu until "Network Setup" appears on the top line of the display.

2. Press Enter when "Reset Network" appears.

3. The machine resets the network interface.

4 Paper Handling

Xerox Phaser 3200MFP 4-1

4 Paper Handling

This chapter explains how to select print materials and load them into your
machine.

This chapter includes:

• Selecting Print Materials – page 4-2

• Loading Paper – page 4-5

• Copy Output Tray – page 4-6

4 Paper Handling

4-2 Xerox Phaser 3200MFP

Selecting Print Materials

You can print on a variety of print materials, such as plain paper, envelopes,
labels, and transparencies. Always use print materials that meet the
guidelines for use with this machine. See Paper Specifications on page 11-9.
To get the best possible print quality, use only high-quality copier-grade paper.

When you choose print materials, consider the following:

• Size: See Supported Sizes of Paper on page 11-7 for paper size
specifications.

• Weight: 16 ~ 24 lb (60 to 90 g/m

2

) for the tray when feeding multiple

pages, and 16 ~ 43 lb (60 to 165 g/m

2

) for the manual tray and the tray

when feeding a single page.

• Brightness: Some papers are whiter than others and produce sharper,
more vibrant images.

• Surface smoothness: The smoothness of the paper affects how crisp the
printing looks on the paper.

CAUTION: Using print materials that do not conform to the

specifications listed on page 11-9 may cause problems that may require
service. This service is not covered by the warranty or service
agreements.

Paper Type, Input Sources, and Capacities

NOTE: If you experience excessive jamming, load one sheet at a time

through the tray or manual tray.

NOTE: Maximum capacity may differ depending on media weight, thickness,

and environmental conditions.

Paper Type

Input Tray/Capacity

Tray Manual Tray

Plain paper 250 1

Envelopes 1 1

Labels 1 1

Transparencies 1 1

Card stock 1 1

4 Paper Handling

Xerox Phaser 3200MFP 4-3

Guidelines for Paper and Special Materials

When selecting or loading paper, envelopes, or other special material, keep
these guidelines in mind:

• Always use paper and other materials that conform with the specifications
listed under Paper Specifications on page 11-9.

• Attempting to print on damp, curled, wrinkled, or torn paper can cause
paper jams and poor print quality.

• Use only high quality copier grade paper for the best print quality.

• Avoid paper with embossed lettering, perforations, or a texture that is too
smooth or too rough. Paper jams may occur.

• Store paper in its wrapper until you are ready to use it. Place cartons on
pallets or shelves, not on the floor. Do not place heavy objects on top of
the paper, whether it is packaged or unpackaged. Keep it away from
moisture, or other conditions that can cause it to wrinkle or curl.

• Store unused materials at temperatures between 59

o

F to 86 oF (15 oC

and 30

o

C). The relative humidity should be between 10 % and 70 %.

• During storage, you should use a moisture-proof wrap, such as a plastic
container or bag, to prevent dust and moisture from contaminating your
paper.

• Load special paper types one sheet at a time through the manual tray or
the paper tray to avoid paper jams.

• Only use materials specifically recommended for use in laser printers.

• To prevent special materials, such as transparencies and label sheets
from sticking together, remove them as they print out.

• For envelopes:

– Use only well-constructed envelopes with sharp and well creased folds.
– Do not use envelopes with clasps and snaps.
– Do not use envelopes with windows, coated lining, self-adhesive seals,

or other synthetic materials.
– Do not use damaged or poorly made envelopes.
– Only use envelopes recommended for laser printers.
– Do not feed stamped envelopes.

• For transparencies:

– Place them on a flat surface after removing them from the machine.
– Do not leave a transparency in the tray for long periods of time. Dust and

dirt may accumulate, resulting in spotty printing.
– To avoid smudging caused by fingerprints, handle them carefully.
– To avoid fading, do not expose printed transparencies to prolonged

sunlight.
– Only use transparencies recommended for use in laser printers.
– Ensure that transparencies are not wrinkled, curled, or have any torn

edges.

4 Paper Handling

4-4 Xerox Phaser 3200MFP

• For labels:

– Verify that their adhesive material can tolerate a fusing temperature of

392

o

F (200 oC) for 0.1 second.

– Make sure that there is no exposed adhesive material between them.

Exposed areas can cause labels to peel off during printing, which can

cause paper jams. Exposed adhesive can also cause damage to

machine components.
– Do not load a sheet of labels through the machine more than once. The

adhesive backing is designed for one pass through the machine.
– Do not use labels that are separating from the backing sheet or are

wrinkled, bubbled or otherwise damaged.
– Only use labels recommended for laser printers.

• For Card Stock or Custom-sized materials:

– Postcards, 3.5 x 5.8 in. (89 x 148 mm) cards and other custom-sized

materials can be printed with this printer. The minimum size is 3 x 5 in.

(76 x 127 mm) and the maximum size is 8.5 x 14 in. (216 x 356 mm)
– Always insert the short-edge into the tray first. If you want to print in

landscape mode, make this selection through your software. Inserting

paper long-edge first may cause a paper jam.
– Do not print on media smaller than 3 in. (76 mm) wide or 5 in. (127 mm)

long.

• For preprinted paper:

– Letterheads must be printed with heat-resistant ink that will not melt,

vaporize, or release hazardous emissions when subjected to the

printer’s fusing temperature of 392 °F (200 °C) for 0.1 second.
– Ink on letterheads must be non-flammable and should not adversely

affect any printer rollers.
– Forms and letterheads should be sealed in a moisture-proof wrapping to

prevent changes during storage.
– Before you load preprinted paper as forms and letterheads, verify that

the ink on the paper is dry. During the fusing process, wet ink can come

off preprinted paper.

• Do not use

Carbonless

paper and

Tracing

paper. Use of these types of

paper could result in chemical smells and could damage your machine.

4 Paper Handling

Xerox Phaser 3200MFP 4-5

Loading Paper

Proper paper loading helps prevent paper jams and ensure trouble-free
printing. Do not remove the paper in the tray while a job is printing. Doing so
may cause a paper jam. See Paper Type, Input Sources, and Capacities on
page 4-2 for acceptable paper size and capacity for the tray.

Using the Paper Tray

The paper tray holds 250 sheets of paper.

For details about loading paper in the tray, see Loading Paper on page 2-6.

To use the special material like envelope, label or card, remove the stack of
plain paper and load one sheet of special material into the tray.

Using the Manual Tray

When you print a document using your PC and want to check the print quality
after each page is printed, load the paper in the manual tray and select

Manual Feeder for Source from the print driver.

1. Load the print material into the

tray. If there is a print side to the
paper it should be face up.

Push the print material firmly into
the manual tray.

2. Adjust the paper guide against

the print material without bending
the material.

3. Select Manual Feeder for

Source from the software

application, and then select the
correct paper size and type. For
details, see Printing a Document
on page 6-6.

4. Send the job to the printer.

5. On the machine the display shows “Add Paper & Press Start”. Press

Start on the machine to start feeding. Printing is started.

6. If you have multiple pages to be printed, the display shows “Add Paper &

Press Start” again. Load the next sheet and press Start.

Repeat this step for every page to be printed.

4 Paper Handling

4-6 Xerox Phaser 3200MFP

NOTE:

• If you experience jams with card stock feeding, turn the paper over and try
again.

• Manually loading paper and pressing Start to start feeding is only
available with PC printing.

• Because the Manual Feed mode does not print jobs automatically and
continuously, incoming faxes are stored in memory instead of printing
immediately.

• When you press Stop/Clear in the Manual Feed mode, the print job in
progress is canceled.

Copy Output Tray

The machine has a paper output tray
that holds 100 sheets of 20lb (

75 g/m

2

)
paper. The output tray collects printed
paper face down, in the order in which
the sheets were printed.

NOTE: Pull the paper output

extension out so that the output does
not drop out of the tray.

Paper

output extension

5 Copying

Xerox Phaser 3200MFP 5-1

5 Copying

This chapter gives you step-by-step instructions for copying documents.

This chapter includes:

NOTE: The machine defaults to Copy mode.

• Making Copies – page 5-2

• Selecting Copy Options – page 5-5

• Copy Setup – page 5-11

5 Copying

5-2 Xerox Phaser 3200MFP

Making Copies

Loading Paper for Copying

The instructions for loading copy materials are the same whether you are
printing, faxing, or copying. For further details, see Loading Paper on page 2-6

NOTE: For copying, you can only use Letter, A4, Legal, Folio, Executive, B5,

A5, or A6 sized print materials.

Preparing a Document

You can use the document glass or the Automatic Document Feeder (ADF) to
load an original document for copying, scanning, and sending a fax. Using the
ADF, you can load up to 30 sheets (20 lb, 75 g/m

2

) for one job. You can, of

course, place only one sheet at a time on the document glass.

NOTE:

Only letter, A4 sized print materials can be placed in the Document Glass.

When you use the ADF:

• Do not load documents smaller than 5.6 x 5.8 inches (142 x 148 mm) or

larger than 8.5 x 14 inches (216 x 356 mm).

• Do not attempt to feed the following types of documents:

– carbon-paper or carbon-backed paper
– coated paper
– onion skin or thin paper
– wrinkled or creased paper
– curled or rolled paper
– torn paper

• Remove all staples and paper clips before loading documents.

• Make sure any glue, ink, or correction fluid on the paper is completely dry

before loading documents.

• Do not load documents that include different sizes or weights of paper.

• Do not load booklets, pamphlets, transparencies, or documents having

other unusual characteristics.

If you wish to copy any of the documents listed here, use the Document Glass.

5 Copying

Xerox Phaser 3200MFP 5-3

Making Copies on the Document Glass

1. Lift and open the document cover.

2. Place the document face down

on the document glass and align it
at the top left corner of the glass.

NOTE:

• Make sure that no documents are

in the ADF (Automatic Document
Feeder). If a document is detected
in the ADF, the machine gives it
priority over the document on the
document glass.

• Only letter, A4 sized print materials

can be placed in the Document
Glass.

3. Close the document cover.

NOTE:

• Lower the document cover gently to avoid damage to the machine or

personal injury.

• If you leave the cover open while copying you may affect copy quality and

toner consumption.

• If you are copying a page from a book or magazine, leave the cover open.

4. Press the Copy button to enter the copy mode.

5. Select the copy settings including number of copies, copy size,

brightness, and original type, by using the control panel buttons. See
Selecting Copy Options on page 5-5.

To clear the settings, use the Stop/Clear button.

6. If necessary, you can use special copy features, such as Poster, Auto Fit,

Clone, and ID Card copying. See Special Copy Features on page 5-7

7. Press Start to begin copying. The display shows the copy processing.

5 Copying

5-4 Xerox Phaser 3200MFP

NOTE:

• You can cancel the copy job during an operation. Press Stop/Clear, and

the copying will stop.

• Dust on the document glass may cause black spots on the printout.

Always keep it clean. See Cleaning the Scan Unit on page 9-5.

• To get the best scan quality, especially for colored or gray-scaled images,

use the document glass.

Making Copies from the Automatic Document Feeder

1. Load the document face up

into the ADF (Automatic
Document Feeder). You can
insert up to 30 sheets at a
time. Make sure that the
bottom of the document
stack matches the paper
size marked on the
document tray.

NOTE: Copies up to 8.5 x 14

can be made from the ADF
(Automatic Document Feeder)

2. Adjust the document guides

to the document size.

3. Select the copy settings

including number of copies,
copy size, brightness, and
original type, by using the
control panel buttons. See

Selecting Copy Options on
page 5-5.

4. To clear the settings, use

the Stop/Clear button.

5. If necessary, you can use

special copy features, such
as Collate and 2 or 4 Up
copying.

6. Press Start to begin copying.

The display shows the copy processing.

NOTE: Dust on the ADF glass may cause black lines on the printout. Always

keep the ADF glass clean. See Cleaning the Scan Unit on page 9-5.

5 Copying

Xerox Phaser 3200MFP 5-5

Selecting Copy Options

Basic Copy Features

The buttons on the control panel let you select all basic copy options:
brightness, document type, copy size, and copy quantity. Set the following
options for the current copy job before pressing Start to make copies.

NOTE: If you press Stop/Clear while setting the copy options, all of the

options you have set for the current copy job will be canceled and returned to
their default status. The settings will automatically return to their default
status after the machine completes the copy job in progress.

Lighten/Darken

If you have an original document containing faint markings or dark images,
you can adjust the brightness to make a copy that is easier to read.

To adjust the brightness, press Lighten/Darken.

You can choose from the following contrast modes:

• Lighten: will make the copies lighter than the original document. This

works well with dark print.

• Normal: will make the copies look the same as the original document.

This works well with standard typed or printed documents.

• Darken: will make the copies darker than the original document. This

works well with light print or faint pencil markings.

Original Type

The Original Type setting is used to improve the copy quality by selecting the
document type for the current copy job.

To select the document type, press Original Type.

You can choose from the following image modes:

• Text: Use for documents containing mostly text.

• Photo & Text: Use for documents with mixed text and photographs.

• Photo: Use when the originals are photographs.

NOTE: When you copy a document containing color on the background,

such as a newspaper or a catalog, the background will appear on your copy.
If you want to reduce the background, change the Lighten/Darken setting to
Lighten and/or the Original Type setting to Text.

5 Copying

5-6 Xerox Phaser 3200MFP

Reduce/Enlarge

Using the Reduce/Enlarge button will reduce or enlarge the size of a copied
image from 25% to 400% when you copying from the document glass or from
25% to 100% from the ADF.

To select from the predefined copy sizes:

1. Press Reduce/Enlarge.

The default setting appears on the bottom line of the display.

2. Press Reduce/Enlarge or the scroll buttons ( or ) to find the size

setting you want.

3. Press Enter to save the selection.

To fine-tune the size of copies:

1. Press Reduce/Enlarge.

2. Press Reduce/Enlarge or the scroll buttons ( or )

until “Custom:25-100%” or “Custom:25-400%” displays on the bottom
line. Press Enter.

3. Press the scroll button ( or ) until the copy size you want appears on

the display.

Pressing and holding the button allows you to quickly scroll to the number
you want.

You can also enter the value using the number keypad.

4. Press Enter to save the selection.

NOTE: When you make a reduced copy, black lines may appear at the

bottom of your copy.

Copy Quantity

You can select the number of copies from 1 to 99.

1. Press Menu on the control panel until “Copy Setup” appears on the top

line of the display.

The first menu item, “Default-Change”, appears on the bottom line.

2. Press Enter.

3. Press the scroll button ( or ) to access the menu item, "Copy

Quantity". It appears on the bottom line, then press Enter.

4. Press the number you want to enter on the display:

You can press and hold the button to quickly scroll the number you want
to enter.

You can also enter the value using the number keypad.

5. Press Enter to save the selection.

5 Copying

Xerox Phaser 3200MFP 5-7

Special Copy Features

You can use the following copy features by pressing Favorite Copy button:

• Off: Prints in normal mode.

• Clone:

Prints multiple image copies from the original document on a single
page. The number of images is automatically determined by the original image
and paper size. See Clone Copying on page 5-7.

• Copy Collate:

Sorts the copy job. For example, if you make 2 copies of a 3
page document, one complete 3 page document will print followed by the
second complete document. See Collation Copying on page 5-8.

• Auto Fit: A

utomatically reduces or enlarges the original image to fit on the

paper currently loaded in the machine. See Auto Fit Copying on page 5-8.

• ID Card Copy:

Prints 2-sided ID cards on one sheet of paper. See ID Card

Copying on page 5-9.

•

2/4 Up

: Prints 2 or 4 original images reduced to fit onto one sheet of paper.

See 2 Up or 4 Up Copying on page 5-9.

• Poster: Prints an image onto 9 sheets of paper (3x3). You can paste the
printed pages together to make one poster-sized document. See Poster
Copying on page 5-10.

NOTE: Some features may not be available depending on where you loaded

the document, on the document glass or in the Automatic Document Feeder.

Clone Copying

This special copy feature can be applied only when you place a document on
the document glass. If a document is detected in the ADF, Clone copying
feature does not work.

1. Place the document to be copied on the document glass, and close the

cover.

2. Press Favorite Copy until “Clone” appears on the bottom line of the

display and press Enter.

3. If necessary, customize the copy settings, including Lighten/Darken and

original type, by using the control panel buttons. See “Selecting Copy
Options” on page 5-5.

4. Press Start to begin copying.

NOTE: You cannot adjust the copy size using the Reduce/Enlarge button

while making a clone copy.

5 Copying

5-8 Xerox Phaser 3200MFP

Collation Copying

This special copy feature is available only when you load documents in the
ADF.

1. Load the documents to be copied in the ADF.

2. Press Favorite Copy until “Copy Collate” appears on the bottom line of

the display and press Enter.

3. If necessary, customize the copy settings, including Lighten/Darken and

original type, by using the control panel buttons. See “Selecting Copy
Options” on page 5-5.

4. Press Start to begin copying.

Auto Fit Copying

This special copy feature can be applied only when you place a document on
the document glass. If a document is detected in the ADF, Auto Fit copying
does not work.

1. Place the document to be copied on the document glass, and close the

cover.

2. Press Favorite Copy until “Auto Fit” appears on the bottom line of the

display and press Enter.

3. If necessary, customize the copy settings, including Lighten/Darken and

original type, by using the control panel buttons. See “Selecting Copy
Options” on page 5-5.

4. Press Start to begin copying.

NOTE: You cannot adjust the copy size using the Reduce/Enlarge button

while Auto Fit copying is enabled.

1

2

3

1

2

3

A

5 Copying

Xerox Phaser 3200MFP 5-9

ID Card Copying

You can copy both sides of the ID Card to a single side of paper.

When you copy using this feature, the machine prints one side of the card on
the upper half of the paper and the other side on the lower half without
reducing the size of the original.

If the original is larger than the printable area, some portions may not be
printed.

This special copy feature can be applied only when you place a document on
the document glass. If a document is detected in the ADF, ID Card copying
feature does not work.

1. Place the ID Card to be copied on the document glass and close the

cover.

2. Press Favorite Copy until “ID Card Copy” appears on the bottom line of

the display and press Enter.

3. If necessary, customize the copy settings, including Lighten/Darken and

original type, by using the control panel buttons. See “Selecting Copy
Options” on page 5-5.

4. Press Start to begin copying.

Your machine begins scanning the front side.

5. When “Set Backside” displays on the bottom line, open the document

cover and turn the card over. Close the cover.

6. Press Start again.

NOTE: If you press the Stop/Clear button or if no buttons are pressed for

approximately 30 seconds, the machine cancels the copy job and returns to
Standby mode.

2 Up or 4 Up Copying

This copy feature is available only when you load documents in the ADF.

1. Load the documents to be copied in the ADF.

2. Press Favorite Copy until “2 UP” or “4 UP” appears on the bottom line of

the display and press Enter.

3. If necessary, customize the copy settings, including Lighten/Darken and

original type, by using the control panel buttons. See “Selecting Copy
Options” on page 5-5.

4. Press Start to begin copying.

NOTE: You cannot adjust the copy size using the Reduce/Enlarge button

for making a 2 or 4 Up copy.

1 2

3 4

1 2

2-up copying

4-up copying

5 Copying

5-10 Xerox Phaser 3200MFP

Poster Copying

This special copy feature can be applied only when you place a document on
the document glass. If a document is detected in the ADF, the Poster copying
feature does not work.

1. Place the document to be copied on the document glass and close the

cover.

2. Press Favorite Copy until “Poster” appears on the bottom line of the

display and press Enter.

3. If necessary, customize the copy settings, including Lighten/Darken and

original type, by using the control panel buttons. See “Selecting Copy
Options” on page 5-5.

4. Press Start to begin copying.

Your original document is divided into 9 portions. Each
portion is scanned and printed one by one in the following
order:

NOTE: You cannot adjust the copy size using the Reduce/

Enlarge button when making a poster.

5 Copying

Xerox Phaser 3200MFP 5-11

Copy Setup

The copy settings on the machine can be customized to suit your copying
requirements.

Changing the Default Settings

The copy options, including lighten/darken, original type, copy size and copy
quantity, can be set to the most frequently used modes. When you copy a
document, the default settings are used unless they are changed by using the
corresponding buttons on the control panel.

To c

reate your own default settings:

1.

Press

Menu

on the control panel until “Copy Setup” appears on the top line of the

display.

The first menu item, “Default-Change”, appears on the bottom line.

2.

Press

Enter

to access the menu item. The first setup option, “Lighten/Darken”,

appears on the bottom line.

3.

Press the scroll button ( or ) to scroll through the setup options.

4.

When the option you want to set appears, press

Enter

to access the option.

5.

Change the setting using the scroll button ( or ).

Values can be entered using the number keypad.

6.

Press

Enter

to save the selection.

7.

Repeat steps 3 through 6, as needed.

8.

To return to Standby mode, press

Stop/Clear

.

NOTE:

While you are setting copy options, pressing

Stop/Clear

cancels the

changed settings and restores their default status.

Setting the Time Out Option

You can set th

e time the machine waits before it restores the default copy settings

after a selection has been made.

1.

Press

Menu

on the control panel until “Copy Setup” appears on the top line of the

display.

2.

Press the scroll button ( or ) to display “Timeout” on the bottom line.

3.

Press

Enter

to access the menu item.

4.

Press the scroll button ( or ) until the status you want appears on the display.

You can select from 15, 30, 60, 120 and 180 (seconds). Selecting “Off” means that
the machine does not restore the default settings until you press

Start

to begin

copying, or

Stop/Clear

to cancel.

5.

Press

Enter

to make your selection.

6.

To return to Standby mode, press

Stop/Clear

.

5 Copying

5-12 Xerox Phaser 3200MFP

6Printing

Xerox Phaser 3200MFP 6-1

6 Printing

This chapter includes:

• Installing Printer Software in Windows – page 6-2

• Printing a Document – page 6-6

• Advanced Printing – page 6-16

• Sharing the Printer Locally – page 6-27

• Using Windows PostScript Driver (Phaser 3200MFP/N Only) – page 6-28

• Using Your Printer in Linux – page 6-32

• Using Your Machine with a Macintosh (Phaser 3200MFP/N only) – page 6-46

6Printing

6-2 Xerox Phaser 3200MFP

Installing Printer Software in Windows

This chapter includes:

• Installing Printer Software – page 6-2

NOTE: For Windows 2000/XP(32/64bit)/2003(32/64bit)/Vista, the system

administrator should install the software.

Installing Printer Software

All applications should be closed on your PC before beginning installation.

Installing Xerox Drivers using the USB port

1. Plug the USB cable into the Printer and connect it to your Personal

Computer (PC). Start your PC and turn on the Printer.

2. Insert the Xerox Drivers CD into the CD-ROM drive.

If you use Windows Vista, when you are asked to allow the installation,
click Continue.
The CD-ROM should automatically run, and an installation window
appears.
If the installation window does not appear, click Start and then Run. Type
X:\Setup.exe, replacing "X" with the letter of your CD-ROM drive and
click OK.
If you use Windows Vista, click Start All Programs Accessories

Run, and type X:\Setup.exe

NOTE: If the "New Hardware Wizard" window appears during the installation

procedure, click

in the upper right corner of the box to close the window,

or click Cancel.

3. When the language selection window appears, select the appropriate

language and then click Next.

6Printing

Xerox Phaser 3200MFP 6-3

4. Choose the components you want to install and then click Next.

5. Click Next.

6. Click Finish. The driver installation is now complete.

Installing Xerox Drivers using the Network

(Phaser

3200MFP/N only)

When you connect your printer to a network, you must first configure the TCP/
IP settings for the printer. See Configuring TCP/IP on page 3-3

After you have assigned and verified the TCP/IP settings, you are ready to
install the software on each computer on the network.

1. Make sure that the printer is connected to your network and powered on.

For details about connecting to the network, see Making Connections on
page 2-8

2. Insert the Xerox Drivers CD into the CD-ROM drive.

If you use Windows Vista, when you are asked to allow the installation,
click Next.
The CD-ROM should automatically run, and an installation window
appears.
If the installation window does not appear, click Start and then Run. Type
X:\Setup.exe, replacing "X" with the letter of your CD-ROM drive and
click OK.
If you use Windows Vista, click Start All Programs Accessories

Run, and type X:\Setup.exe

NOTE: If the "New Hardware Wizard" window appears during the installation

procedure, click

in the upper right corner of the box to close the window,

or click Cancel.

6Printing

6-4 Xerox Phaser 3200MFP

3. When the language selection window appears, select the appropriate

language and then click Next.

4. Choose the components you want to install and then click Next.

5. Click Next.

Click Finish. The driver installation is now complete.

6Printing

Xerox Phaser 3200MFP 6-5

Selecting the Xerox Network Printer Port

To print to the Xerox Network Printer port, you need to select it in the printer
driver.

1. From the Windows Start menu, selecting Settings and then Printer to

open the Printer folder.
In Windows XP(32/64bit)/2003(32/64bit), select Start and then Printers
and Faxes.
For Windows Vista, select Start Control Panel Hardware and

Sound Printers.

2. Right-click on the your printer name icon and select Properties from

the pop-up menu.

3. In Windows 98/Me, click the Details tab.

In Windows 2000/XP(32/64bit)/2003(32/64bit)/Vista, click the Ports tab.

4. Click Add Port.

5. In Windows 98/Me, click Other, and select Standard TCP/IP Port. Click

OK.

In Windows 2000/XP(32/64bit)/2003(32/64bit)/Vista, select Standard
TCP/IP Port and click New Port.

6. The Network Printer Port Wizard window appears. Select the method for

detecting the network interface card of your machine and enter the asso­ciated address, if necessary. Click Next.

You can find a print server by entering the printer’s IP address, MAC
address, or IPX/SPX address. To search through all of the interface cards
connected to the network, select Auto Detection on the network.

7. If you selected Auto Detection on the network, the system detects all of

the print servers and displays a list. Select your printer you want to use
then click Next.

8. Type a port name to identify the new printer and click Finish.

9. The selected port displays on the print port list. Click OK or Close.

10. You are finished. To send a job to the network printer, select the printer

from the application programme.

NOTE: The printer that has been installed will become the default printer.

6Printing

6-6 Xerox Phaser 3200MFP

Printing a Document

This machine allows you to print in various Windows applications, a Macintosh
computer, or a Linux system. The exact steps for printing a document may
vary depending on the application you use.

Basic Printing

NOTE: Your printer driver Properties window that appears in this User

Guide may differ depending on the printer in use. However the composition of
the printer properties window is similar.

NOTE: Check the Operating System(s) that are compatible with your printer.

Please refer to the OS Compatibility section of Printer Specifications in your
Printer User Guide.

NOTE: If you need to know the exact name of your printer, you can check

the supplied CD-ROM.

The following procedure describes the general steps required for printing from
various Windows applications. The exact steps for printing a document may
vary depending on the application program you are using. Refer to the User
Guide of your software application for the exact printing procedure.

1. Open the document you want to print.

2. Select Print from the File menu. The Print window is displayed. It may

look slightly different depending on your application.

The basic print settings
are selected within the
Print window. These
settings include the
number of copies and
print range.

3. Select your printer

driver from the Name

drop-down list.

Make sure that
your printer is
selected.

6Printing

Xerox Phaser 3200MFP 6-7

4. To take advantage of the printer features provided by your printer driver,

click Properties or Preferences in the application’s Print window. For
details, see Printer Settings on page 6-7.

If you do not have Properties or Preferences, select either Setup,
Printer, or Options in your Print window. Then click Properties on the
next screen.

5. Click OK to close the printer properties window.

6. To start the print job, click OK or Print in the Print window.

Printer Settings

You can use the printer properties window, which allows you to access all of
the printer options you need when using your printer. When the printer
properties are displayed, you can review and change the settings needed for
your print job.

Your printer properties window may differ, depending on your operating
system. This User Guide shows the Properties window for Windows XP.

Your printer driver Properties window that appears in this User Guide may
differ depending on the printer in use.

If you access printer properties through the Printers folder, you can view
additional Windows-based tabs (refer to your Windows User Guide).

NOTE: Most Windows applications will override settings you specify in the

printer driver. Change all print settings available in the software application
first, and change any remaining settings using the printer driver.

NOTE: The settings you change remain in effect only while you are using the

current program. To make your changes permanent, make them in the
Printers folder.

NOTE: The following procedure is for Windows XP. For other Windows OS,

refer to the corresponding Windows User's Guide or online help.

1. Click the Windows Start button.

2. Select Printers and Faxes.

3. Select your printer driver icon.

4. Right-click on the printer driver icon and select

Printing Preferences.

5. Change the settings on each tab, click OK.

6Printing

6-8 Xerox Phaser 3200MFP

Layout Tab

The Layout tab provides
options to adjust how the
document appears on the
printed page. The Layout

Options includes Multiple
Pages per Side and Poster
Printing. See Basic Printing

on page 6-6 for more
information on accessing
printer properties.

Paper Orientation

Paper Orientation

allows you
to select the direction in
which information is printed
on a page.

Portrait prints across the width of the page, letter style.

Landscape prints across the length of the page, spreadsheet style.

Rotate allows you to rotate the page

the selected degrees.

Layout Options allows you to select
advanced printing options. You can
choose Multiple Pages per Side and
Poster Printing.

For details, see

Printing Multiple Pages on One Sheet of Paper (N-Up Printing)

on page 6-16.

For details, see

Printing Posters on page 6-17.

1

2

1

Landscape

Portrait

2

6Printing

Xerox Phaser 3200MFP 6-9

Paper Tab

Use the following options to set the basic paper handling specifications when
you access the printer properties. See Basic Printing on page 6-6 for more
information on accessing printer properties.

Click the Paper tab to access various paper properties.

Copies

Copies

allows you to choose the number of copies to be printed. You can

select 1 to 999 copies.

Size

Size allows you to set the size of paper you loaded in the tray.If the required
size is not listed in the Size box, click Custom. When the Custom Paper
Setting window appears, set the paper size and click OK. The setting appears

in the list so that you can select it.

1

2

3

4

5

1

2

Enter the custom name
you want to use.

Enter the paper size.

6Printing

6-10 Xerox Phaser 3200MFP

Source

Make sure that Source is set to the corresponding paper tray.

Use the Manual Feeder

source when printing to special material. You need to

load one sheet at a time into the manual tray.

If the paper source is set to Auto Selection, the machine automatically picks
up print material in the following order: the manual tray and the paper tray.

Layout Type

Make sure that Type is set to Printer Default. If you load a different type of
print material, select the corresponding paper type. If you use cotton paper,
set the paper type to Thick Paper for best printing. To use recycled paper,
with weighs from 20lb to 24lb (75~90g/m

2

), or colored paper, select Color

Paper.

Scaling Printing

Scaling Printing

allows you to automatically or manually scale your print job

on a page. You can choose from None, Reduce/Enlarge, and Fit to Page.

•

For details, see

Printing a Reduced or Enlarged Document on page 6-18.

•

For details, see

Fitting Your Document to a Selected Paper Size on

page 6-19.

3

4

5

6Printing

Xerox Phaser 3200MFP 6-11

Graphics Tab

Use the following Graphic options to adjust the print quality for your specific
printing needs. See Basic Printing on page 6-6 for more information on
accessing printer properties.

Click the Graphics tab to display the properties shown below.

Resolution

The Resolution options you
can select may vary
depending on your printer
model. The higher the setting,
the sharper the clarity of
printed characters and
graphics. The higher setting
also may increase the time it
takes to print a document.

Toner Save Mode

Image Mode

The available options are
Normal and Text Enhancement.

Printer Setting: This setting is for normal documents.

Normal: This setting is for bolder line widths or darker gray-scale images.

Text Enhancement: This setting is for finer line width, higher definition in

graphics, and lighter gray-scale images.

Toner Save Mode

Selecting this option extends the life of your print cartridge and reduces your
cost per page without a significant reduction in print quality.

Printer Setting: If you select this option, this feature is determined by the
setting you’ve made on the control panel of the printer.

On: Select this option to allow the printer to use less toner on each page.

Off: If you don’t need to save toner when printing a document, select this

option.

1

2

3

4

1

2

3

6Printing

6-12 Xerox Phaser 3200MFP

Advanced Options

You can set advanced settings by
clicking the Advanced Options button.

TrueType Options: This option
determines what the driver tells the
printer about how to image the text in
your document. Select the appropriate
setting according to the status of your
document. This option is available only
when you use Windows 9x.

Download as Outline

: When this option is
selected, the driver will download any TrueType fonts that are used in your document
not already stored (resident) on your printer. If, after printing a document, you find that
the fonts did not print correctly, choose Download as bit image and resubmit your print
job. The Download as bit image setting is often useful when printing Adobe.

This

feature is available only when you use the PCL printer driver.

Download as Bitmap: When this option is selected, the driver will download
the font data as bitmap images. Documents with complicated fonts, such as
Korean or Chinese, or various other fonts, will print faster in this setting.

Print as Graphics:

When this option is selected, the driver will download any

fonts as graphics. When printing documents with high graphic content and
relatively few TrueType fonts, printing performance (speed) may be enhanced
in this setting.

Print All Text Black: When the

Print All Text Black

option is selected, all text
in your document prints solid black, regardless of the color it appears on the
screen.

4

6Printing

Xerox Phaser 3200MFP 6-13

Extras Tab

You can select output options for your document. See Basic Printing on
page 6-6 for more information about accessing the printer properties.

Click the Extras tab to access the following feature:

Watermark

You can create a background text image to be printed on each page of your
document.

For details, see

Using Watermarks on page 6-20

Overlay

Overlays are often used to take the place of preprinted forms and letterhead
paper.

For details, see

Using Overlays on page 6-23

Output Options

Print Sebset: You can set the sequence in which the pages print. Select the

print order from the drop-down list.

Normal (1,2,3): Your printer prints all pages from the first page to the last
page.

Reverse All Pages (3,2,1): Your printer prints all pages from the last page to
the first page.

Print Odd Pages: Your printer prints only the odd numbered pages of the
document.

Print Even Pages: Your printer prints only the even numbered pages of the
document.

1

2

3

1

2

3

6Printing

6-14 Xerox Phaser 3200MFP

Use Printer Fonts

: When Use Printer Fonts is checked, the printer uses the fonts that
are stored in its memory (resident fonts) to print your document, rather than
downloading the fonts used in your document. Because downloading fonts takes time,
selecting this option can speed up your printing time. When using Printer fonts, the
printer will try to match the fonts used in your document to those stored in its memory.
If, however, you use fonts in your document that are very different from those resident
in the printer, your printed output will appear very different from what it looks like on the
screen.

This feature is available only when you use the PCL printer driver.

About Tab

Use the About tab to display the copyright notice and the version number of
the driver. If you have an Internet browser, you can connect to the Internet by
clicking on the web site icon. See Basic Printing on page 6-6 for more
information about accessing printer properties.

Using a Favorite Setting

The Favorites option, which is visible on each properties tab, allows you to
save the current properties settings for future use.

To save a Favorites item:

1. Change the settings as needed on each tab.

2. Enter a name for

the item in the
Favorites input
box.

3. Click Save.

When you save
Favorites, all
current driver
settings are saved.

To use a saved setting,
select the item from the
Favorites drop down
list. The printer is now
set to print according to
the Favorites setting
you selected.

To delete a Favorites item, select it from the list and click Delete.

You can also restore the printer driver’s default settings by selecting Printer

Default from the list.

Using Help

Your printer has a help screen that can be activated by clicking the Help
button in the printer properties window. These help screens give detailed
information about the printer features provided by the printer driver.

You can also click from the upper right corner of the window, and then click
on any setting.

6Printing

Xerox Phaser 3200MFP 6-15

Canceling a Print Job

If the print job is waiting in a print queue or print spooler, such as the Printer
group in Windows, delete the job as follows:

1. Click the Windows Start button.

2. For Windows 98/Me/2000, select Settings and then Printers.

For Windows XP(32/64bit)/2003(32/64bit), select Printers and Faxes.

For Windows Vista, select Control Panel Hardware and Sound

Printers.

3. Double-click the printer driver for this printer.

4. From the Document menu, select Cancel Printing (Windows 98/Me) or

Cancel (Windows 2000/XP(32/64bit)/2003(32/64bit)/Vista).

NOTE: You can also access this window by simply double-clicking the

printer icon at the bottom right corner of the Windows desktop.

You can also cancel the current job by pressing the Stop/Clear button on the
control panel of your printer.

6Printing

6-16 Xerox Phaser 3200MFP

Advanced Printing

This section explains printing options and advanced printing tasks.

NOTE: Your printer driver Properties window that appears in this User

Guide may differ depending on the printer in use. However the composition of
the printer properties window is similar.

NOTE: If you need to know the exact name of your printer, you can check

the supplied CD-ROM.

Printing Multiple Pages on One Sheet of Paper (N-Up
Printing)

You can select the number of pages to print on a single sheet of paper. To print
more than one page per sheet, the pages will be reduced in size and arranged
in the order you specify. You can print up to 16 pages on one sheet.

1. To change the print settings from your software application, access

printer properties. See Basic Printing on page 6-6

2. From the Layout tab, choose Multiple Pages per Side in the Layout

Type drop-down list.

3. Select the number of pages you want to print per sheet

(1, 2, 4, 6, 9, or 16) in the Pages per Side drop-down list.

1 2

3 4

6Printing

Xerox Phaser 3200MFP 6-17

4. If necessary, select the page order from the Pages Order drop-down list.

Select Print Page Border to print a border around each page on the
sheet.

5. Click the Paper tab, select the paper source, size, and type.

6. Click OK and print the document.

Printing Posters

This feature allows you to print a single-page document onto 4, 9, or 16 sheets
of paper, for the purpose of pasting the sheets together to form one poster­size document.

1. To change the print settings from your software application, access

printer properties. See Basic Printing on page 6-6.

2. Click the Layout tab, select Poster Printing in the Layout Type drop-

down list.

6Printing

6-18 Xerox Phaser 3200MFP

3. Configure the poster option:

can select the page layout from

2x2, 3x3, 4x4

or

Custom

. If you select

2x2

,
the output will be automatically stretched to cover 4 physical pages. If the
option is set to Custom, you can enlarge the original from 150% to 400%.
Depending on the level of the enlargement, the page layout is automatically
adjusted to

2x2, 3x3, 4x4

.

Specify an overlap in millimeters or inches to make it easier to paste the
sheets together.

4. Click the Paper tab, select the paper source, size, and type.

5. Click OK and print the document. You can complete the poster by pasting

the sheets together.

Printing a Reduced or Enlarged Document

You can change the size of a page’s content to appear larger or smaller on the
printed page.

1. To change the print settings from your software application, access

printer properties. See Basic Printing on page 6-6.

2. From the Paper tab, select Reduce/Enlarge in the Printing Type drop-

down list.

2x2

3x3

0.15 inches

0.15 inches

6Printing

Xerox Phaser 3200MFP 6-19

3. Enter the scaling rate in the Percentage input box.

You can also click the or button.

4. Select the paper source, size and type in the Paper Options section.

5. Click OK and print the document.

Fitting Your Document to a Selected Paper Size

This printer feature allows you to scale your print job to any selected paper
size regardless of the digital document size. This can be useful when you want
to check fine details on a small document.

1. To change the print settings from your software application, access

printer properties. See Basic Printing on page 6-6.

2. From the Paper tab, select Fit to Page in the Printing Type drop-down

list.

A

6Printing

6-20 Xerox Phaser 3200MFP

3. Select the correct size from the Output size drop-down list.

4. Select the paper source, size, and type in Paper Options.

5. Click OK and print the document.

Using Watermarks

The Watermark option allows you to print text over an existing document.

There are several predefined watermarks that come with the printer, and they
can be modified, or you can add new ones to the list. See Creating a
Watermark on page 6-21.

Using an Existing Watermark

1. To change the print settings from your software application, access

printer properties. See Basic Printing on page 6-6.