Features and Benefits
DLP™ (Texas Instruments)
Display Technology
The DP 1015’s powerful DLP technology produces a contrast ratio of 900:1, which provides
truer blacks and holds highlight detail for
unsurpassed picture clarity, luminance and
color accuracy. DLP digitally manipulates light
and is a proven technology utilized wherever
visual excellence is in demand. It’s the only
display solution that enables an entirely digital
connection between the video source and the
screen in front of you.
High 1024x768 (XGA) Resolution
With the DP 1015’s high resolution, you can fill
the screen with your presentation without seeing
pixelation, resulting in a higher quality viewing
experience and no jagged text or graphics.
1500 Lumens
In the past, smaller projector systems sacrificed
power and brightness to provide such a small
form factor. Not so with the DP 1015 with its
bright 1500 lumens, which allows you to present
in bright ambient light situations and still
provide professional quality viewing.
Wireless IR Remote Control,
Omni-directional IR Receiver
and Laser Pointer
Ninety-percent of success in presenting is just
showing up with the Xerox DP 1015. The other
ten is provided by the ability to be animated and
in-control of your presentation with the DP
1015’s IR Remote Control signaling the Omnidirectional IR receiver from anywhere in the
room. With the added ability to highlight text or
graphics with the built-in laser pointer, you’ll
have command of the room.
Extension Module
The DP 1015 provides additional features with
its extention module including, USB port for
adding USB capable accessories and stereo
audio output when precision audio is needed.
Copyright© 2003 Xerox Corporation. All rights reserved. Xerox®, the digital X® are registered trademarks of Xerox Corporation in the United States and/or other countries and are used under license. DLP™ is a trademark of Texas Instruments.
Xerox DP 1015 Digital Projector Specifications
Projector Type Single 0.7-inch DLP technology from Texas Instruments
Weight/Dimensions 3.5 lb, 9.0(W) x 7.6(D) x 2.7(H) inches; 229(W) x 193(D) x 69 (H) mm
Resolution Native: 1024 x 768 XGA
Brightness 1500 Lumens
Zoom Type 1.2:1 manual zoom and focus
Ambient Noise Level 43dB
Lamp Life Cycle and Type 1500 hour, 150 watt VIP lamp
Aspect Ratio 4:3 native, 5:4 & 16:9 compatible
Input Connections DVI(M1DA) x 1, RGB(M1DA-D-Sub 15 pin) x 1, USB, RS232(M1DA) x
1,Y/Pb/Pr (M1DA,VGA) x 1, Y/CbCr (RCA) x 1, S-video, Mini DIN 4 Pin x 1,
composite video x 1, Audio: RCA x 1 & Mini Jack x 1
Note: This function YPb/Pr (M1DA, VGA) and Y/CbCr (RCA) is workable
if you have M1DA-RCA, VGA-RCA, RCA-RCA cable.
Computer Compatibility IBM PC and compatibles, Apple Macintosh, iMac, NEC PC98 series,
Fujitsu FM Towns, and VESA standards SXGA, XGA, SVGA, and VGA (resizing)
Video Compatibility NTSC\PAL\SECAM (M), 480i, HDTV(720p x 1080i)
Throw Ratio 60” at 2m and 1.45m to 10m
Keystone Correction ± 20 degrees
Remote Control Wireless IR Remote
Projection Screen Size (diagonal) 27.58 to 267.2 inches (0.7 to 6.79 meters)
Projection Distance 3.94 to 32.8 feet (1.2 to 10 meters)
Sync Rate HSync 15-70kHz VSync 45-85Hz
Output Terminal 1 Watt Speaker
Projection Methods Front, rear, rear ceiling, ceiling
Horizontal Scan Rate 31.5 to 80 kHz
Vertical Scan Rate 56 to 85 kHz
Power Supply Input 90-240 VAC, 50/60Hz
Power Consumption 220 watts (maximum)
IR Receiver Omni-directional
Uniformity 80%
Unit Functions Digital Keystone, Digital Zoom/pan, Mute, P-Scan (EDTV), Autosync, Blank,
Auto Source Detection, HDTV (720p x 1080I), Freeze, Volume, Laser Pointer,
USB Mouse Navigator
Standard Accessories AC power cable, M1DA -VGA and USB cable, S-video cable, VGA cable,
video/audio cable, wireless remote control, battery, adapter, soft carrying case,
user’s guide and PC audio cable included
Optional Accessories M1DA-DVI cable, VGA to RCA cable, M1DA-RCA cable
Extended Module USB port, Stereo audio output
Warranty Three-year limited parts and labor, 90-days on lamp