Fig. 4
Select System Settings.
Fig. 7
Select Close.
Fig. 1
Select Access.
Fig. 2
Enter the System Administrator Password from the Numeric Keypad and
then press Confirm. (See Machine Administration User Guide for
default password)
Fig. 3
Select System Settings
Fig. 5
Select Copy Mode Settings.
Fig. 8
Select Exit.
Fig. 6
Select the appropriate settings button to make changes as needed. After
changes are completed or if no changes are needed continue to Fig. 7
Refer to the charts of the Administration Settings- Copy Mode Part
2 of 2 pamphlet for settings value.
Fig. 9
Changes are completed.
Administration Setting Copy Mode - 1 of 4
Quick Start Guide
Administration Setting Copy Mode - 2 of 4
Basic Copy Presets
1. to 3. Paper Tray- 2
from the top. 2
button: 3 as Tray 3.)
Setting Descripti n o
4. to 5. Reduce/Enlarge- 3
follows from the top. 3
70..7%.)
Setting Description
1 Ratio currently set to R/E Preset 1
2 Ratio currently set to R/E Preset 2
3 Ratio currently set to R/E Preset 3
4 Ratio currently set to R/E Preset 4
5 Ratio currently set to R/E Preset 5
6 Ratio currently set to R/E Preset 6
7 Ratio currently set to R/E Preset 7
nd
nd
to 4th Buttons (The defaults are as follows
button: 1 as Tray 1, 3rd button: 2 as Tray 2, 4th
1 Tray 1
2 Tray 2
3 Tray 3
4 Tray 4
5 Tray 5 (Bypass)
rd
to 4th Buttons (The defaults are as
rd
button: 1 as 50%, 4th button: 2 as
Copy Defaults
2. Single Color (The default setting is 1)
3. Dual Color – Color Image (The default setting is 1)
4. Dual Color – B/W Image (The default setting is 0)
Setting Description
0 Black (Dual Color only)
1 Red
2 Green
3 Blue
4 Yellow
5 Magenta
6 Cyan
7 Specified color set to Custom Color 1
8 Specified color set to Custom Color 2
9 Specified color set to Custom Color 3
10 Specified color set to Custom Color 4
11 Specified color set to Custom Color 5
12 Specified color set to Custom Color 6
Copy Defaults
5. Reduce/Enlarge (The default setting is 0)
Setting Descripti n o
0 100%
1 Ratio currently set to R/E Preset 1
2 Ratio currently set to R/E Preset 2
3 Ratio currently set to R/E Preset 3
4 Ratio currently set to R/E Preset 4
5 Ratio currently set to R/E Preset 5
6 Ratio currently set to R/E Preset 6
7 Ratio currently set to R/E Preset 7
8 % Auto
6. Paper Supply (The default setting is 0)
Setting Description
0 Auto
1 Tray 1
2 Tray 2
3 Tray 3
4 Tray 4
5 Tray 5
7. 2 Sided (The default setting is 0)
Setting Description
1 1 – 2 Sided
2 2 – 1 Sided
3 2 – 2 Sided
0 1 – 1 Sides
8. Output (The default setting is o)
Setting Description
0 Auto
1 Collated
2 Un collated
9. Output Destination (The default setting is 0)
Setting Description
0 Center Output Tray
2 Fi nisher Tray
Administration Setting Copy Mode - 3 of 4
Copy Defaults
10. Margin Shift-Side 1 (The default setting is 0)
11. Margin Shift-Side 2 (The default setting is 10)
Setting Description
0 No Shift
1 Auto Center
2 Corner Shift (Top Right)
3 Corner Shift (Bottom Right)
4 Corner Shift (Top Left)
5 Corner Shift (Bottom Left)
6 Corner Shift (Top Center)
7 Corner Shift (bottom Center)
8 Corner Shift (Left Center)
9 Corner Shift (Right Center)
10 Mirror shift (Side 2 only)
12. Border Erase-Top, Bottom (The default setting is 5 mm)
13. Border Erase -Left, & Right (The default setting is 5 mm)
14. Center Erase (The default setting is 0)
Setting Description
0 None
1 to 50 Set the center erase dimensions in 1 mm increments.
15. Original Type (Auto/Full Color) (The default se
16. Original Type (Black) (The default setting is 1)
Setting Descripti n o
0 Text
1 Text & Photo (Halftone)
2 Text & Photo (Photograph)
3 Text & Photo (Color Copies)
4 Photo (Halftone)
5 Photo (Photograph)
6 Photo (Color Copies)
7 Color Originals (map)
8 Color Originals (Highlighted Originals)
9 Color Originals (Inkjet Originals)
17. Auto Exposure (The default setting is 1)
Setting Description
0 Off
1 On
tting is 1)
Copy Defaults
18. Lighter/Darker (The default setting is 3)
Setting Description
0 Lighter (+3)
1 Lighter (+2)
2 Lighter (+1)
3 Normal
4 Darker (-1)
5 Darker (-2)
6 er Dark (-3)
19. Contrast (The default setting is 2)
20. Sharpness (The default setting is 2)
21. Color Saturation (The default setting is 2)
Setting Description
0 Higher
1 High
2 Normal
3 Low
4 Lower
22. Color Shift (the default setting is 2)
Settings Value Description
0 Coolest
1 Cool
2 Normal
3 Warm
4 Warmest
27. Original Orientation (The default setting is 0)
Setting Description
0 Head to Top
1 Head to Left
28. Image Rotation (The default setting is 1)
Setting Description
0 Always On
1 On during Auto
2 Off
29. Rotation Direction (The default setting is 1)
Setting Description
0 Auto (only when the finisher is installed) *the
default setting is 0 when the finisher is installed.
1 Portrait Original-Left Edge
2 Portrait Original- Right Edge
Copy Control
1. Auto Paper Off (The default setting is 1)
Setting Description
1 Select Tray 1
2 Select Tray 2
3 Select Tray 3
4 Select Tray 4
2. Memory Full Procedure (The default setting is 0)
Setting Description
0 Disable
1 Enables stored data
3. Maximum Stored Pages (the defalt setting is 999)
Settings Value Description
1 to 999 The number of pages that is specified can be
stored.
Reduce/Enlarge Presets
1. to 7. R/E Presets 1 to 7 (The default settings are: in order from
R/E Presets, 50.0% in 3, 70.7% in 7, 81.6% in 8, 86.6% in 9,
115.4% in 10, 122.5% in 11, 141.4% in 13)
Setting Description Setting Description
1 10 25.0% 115.4%
2 11 35.3% 122.5%
3 12 50.0% 129.4%
4 13 57.7% 141.4%
5 14 61.2% 163.2%
6 15 64.7% 173.2%
7 16 70.7% 200.0%
8 17 81.6% 282.8%
.6 400.9 86 % 18 0%
Quick Start Guide
Administration Setting Copy Mode - 4 of 4
Loading...