Xerox 4050 NPS, 4090 NPS User Manual

Xerox DocuPrint 4050/4090 NPS/IPS

Master Index

721P90591 Version 8.0 October 2002

Xerox Corporation 701 S. Aviation Boulevard El Segundo, CA 90245

Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen, such as icons, screen displays, looks, etc.

Printed in the United States of America.

Publication number: 721P90591

Xerox® and all Xerox products mentioned in this publication are trademarks of Xerox Corporation. Products and trademarks of other companies are also acknowledged.

Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be corrected in subsequent editions.

Index

Symbols

#copies operator PD 1-9 %%DocumentMedia command, example PJ

4-3 %%XEROX-XIPP command PJ 6-7 %stdin PD 1-31 () (parentheses)

DOS xcat DC 6-15

SunOS/Solaris formmerge DC 6-19 .pfb extension PD 1-6 /var/db/forms directory DC 4-3, DC 6-3 /var/spool/data directory PJ 6-3

File of Files default DC 6-5

generating PostScript files DC 6-3

storing files DC C-1

Xcat jobs default DC 6-12

Numerics

4mm cartridge tape drive, cleaning RM 6-1

–

RM 6-2

A

access level

Cancel Documents command PJ 3-4

Change Document Attributes PJ 1-29

Change Virtual Printer PJ 2-3–PJ 2-4

Copy Virtual Printer PJ 2-4

Create Virtual Printer PJ 2-2

Delete Virtual Printer PJ 2-4

EndOfRun command PJ 5-4–PJ 5-7

EndOfSet command PJ 5-6–PJ 5-7

Forward Document command PJ 3-5

Hold Documents PJ 3-6

List Documents PJ 3-7–PJ 3-10

List Virtual Printers PJ 2-5

Promote Document PJ 3-11

Release Documents PJ 3-11

Set Virtual Printer Flags PJ 2-8

Show Document Attributes PJ 1-30

Show Scheduling Policy PJ 3-12

Staple command PJ 5-7 Start PJ 3-13 Start Virtual Printer PJ 2-7 Stop Virtual Printer PJ 2-7

access to printer, remotely

telnet SJ 8-1

Web-based SJ 8-1 access, remote CM 1-4 Account information, Quick Print for

Windows NT 4.0 SJ 6-24 account information, specifying PJ 1-8 accounting file versions CM 9-2 accounting files

copying to floppy CM 9-8 deleting CM 9-9 maintaining CM 9-1–CM 9-9

purging CM 9-7 Active List PJ 3-1 adding Job Ticket PJ 4-2 additional features SO 3-9 additional metrics entry PD 1-3 address data, merging DC G-1 addressing, relative PJ 6-1 administrative mode DC 7-9 administrator

accessing commands CM 1-2

changing password CM 1-3 Adobe

Type Manager PD 1-6 Adobe fonts SO 2-4 Adobe Photoshop DC 9-1 AdobePS drivers

selecting SJ 4-6

submitting print jobs SJ 4-22–SJ 4-38 Advanced Customer Training (ACT) RM 7-2 Advanced Function Image and Graphics

(AFIG) SO 5-1

Advanced Function Presentation,

see

AFP

advanced PostScript options

Windows NT 4.0 (transparent)

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IS = IPDS Solutions Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

Master Index

INDEX-1

INDEX

compressing graphics SJ 5-32 overview SJ 5-31–SJ 5-36 printing error information SJ 5-33 printing graphics in color SJ 5-33 printing mirror images SJ 5-33 printing negative images SJ 5-33 printing with printer fonts SJ 5-34 specifying format SJ 5-36 specifying halftoning options SJ 5-35 specifying printing resolution SJ 5-35 using substitution table SJ 5-34 using TrueType fonts SJ 5-36

AFP

data flows IS 10-1–IS 10-7 definition SJ 2-1 overview IS 1-1 page origins, modifying IS 4-19 print flows IS 10-1–IS 10-7 resources SJ 2-1–SJ 2-3

summary SJ 2-1 AFP environment SO 5-5 AFP Font Collection SJ 2-3, IS 4-2 AFPDS SJ 2-5 AIX print flow IS 10-6 APA (all-points addressability) SJ 2-1 Apollo workstation SJ 2-15 AppleTalk PD 1-17 application examples DC 1-2 appName subdirectory PJ 6-2 architecture SJ 3-4–SJ 3-7 arc-to-bezier conversion PD 1-33 area 3, clearing paper jams TG 4-14–TG

4-15

area 4, clearing paper jams TG 4-16–TG

4-18

area 5, clearing paper jams TG 4-18–TG

4-20

area 7, clearing paper jams TG 4-21–TG

4-23 area 8, clearing paper jams TG 4-24 area 9, clearing paper jams TG 4-24–TG

4-25 areas 1 and 1A, clearing paper jams TG 4-9

TG 4-11 areas 2 and 2A, clearing paper jams TG

4-11–TG 4-14

areas 6 and 6A, clearing paper jams TG

4-20–TG 4-21

areas A and B, clearing stitcher/stacker tray

paper jams TG 4-26–TG 4-27

AS/400

AFP data flow IS 10-5

connections SJ 2-11–SJ 2-12 ASCII greeting message CM 12-4 ASCII input PD 1-22 ASCIIFontName attribute PJ 1-8 ASCIIFontSize attribute PJ 1-8 asynchronous communications PD 1-18 attributes

changing PJ 1-29

description PJ 1-1

methods for selecting PJ 1-3

precedence PJ 1-6

priority in setting PJ 1-6

setting PJ 1-2

showing PJ 1-30

understanding PJ 1-1

virtual printer PJ 2-1 attributes, overview SJ 1-2 .attrs file CM 2-3 audible tones SO 3-9 automatic highlight color rendering PJ 1-15 AutoTabShift attribute PJ 1-8 award certificate example DC 4-1, DC 4-7

B

background form DC 7-2 Background Forms

creating DC 5-1–DC 5-4

cycling DC 5-5–DC 5-8 background menu CM 3-3 background printing, Macintosh

AdobePS driver SJ 4-26

LaserWriter driver version 7.x SJ 4-2

LaserWriter version 8.x SJ 4-14 backing up

site files CM 2-9

virtual printers list CM 2-11

–

Xerox files CM 2-10 backing up forms DC F-1 Backup Site Files command CM 2-9 Backup Virtual Printers List command CM

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IS = IPDS Solutions Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

INDEX-2

Master Index

INDEX

2-11 Backup Xerox Files command CM 2-10 banking applications, example IS 1-7 banner page

job message

Quick Print for Windows NT 4.0 SJ

6-13, SJ 6-14

Windows NT 4.0 (transparent) SJ

5-21

sender name

Macintosh drivers (transparent) SJ

4-9 banner pages CM 4-1 banner pages, Novell PJ 3-18 bar compression CM 2-3, CM 2-5, CM 2-6 BARR/AFP connection SJ 2-12 BARR/RJE connection SJ 2-9 BCOCA SJ 2-4 BCOCA (Bar code Object Content

Architecture) SO 5-5 benefit book example DC 1-3 bezier PD 1-33 billing

meter

displaying CM 8-8

printing, data CM 8-11

report, printing CM 8-11 binary input PD 1-22 bindery entry PJ 3-16 bitmaps PD 1-4, PD 1-14 BitsPerSample TIFF tag DC E-1 black areas, mapping PJ 1-16 black pixels

GetTiff macro DC 8-5 Blank Back Sides PJ 1-9 blank pages

XCat DC 6-10

XMerge DC 6-5, DC 6-7, DC 6-14, DC

6-18 booting the controller CM 3-2 borders, invisible frame DC 4-7 bounding box padding PD 1-32 break page PD 1-18 broadcast message

utility command CM 2-1

Broadcast Message to All Execs command

CM 2-1

Broadcast message to all execs command

CM 2-1 browser based access CM 1-5 BuildProfile option SJ 2-21 bus and tag

channel connection SO 5-2

button

Continue SO 3-4 Information SO 3-5 stop SO 3-4

ByteCode files

files created DC A-2 proprietary compression DC 5-2 Tiff/G4 format compared DC 3-2

C

calculating throughput DC D1-2 calibration

evaluating output CM 15-2

when to perform CM 15-1 Cancel Documents command PJ 3-4 canceling commands CM 1-2 capabilities SJ 3-8–SJ 3-10 CCITT

printing speed PD 1-34–PD 1-35

specifications PD 1-34 CD-ROM

ejecting CM 2-2

installing CM 10-2

installing software updates from CM 2-7

listing files on CM 2-8

printing files from CM 2-8 central processing unit SO 2-3 Change Administrator Password command

CM 1-3

Change Document Attributes command PJ

1-29

Change Imager Parameters command CM

5-30

Change PCL Imager Parameters command

CM 5-34

Change Virtual Printer command PJ 2-3–PJ

2-4

Change virtual printer command

CycleForms attribute DC 5-5–DC 5-8

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IS = IPDS Solutions Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

INDEX-3

Master Index

INDEX

disposition attribute

examples DC 3-7, DC 4-3 Mask, Form formats DC 3-3–DC 3-6 syntax DC 7-3 Tiff/G4, ByteCode formats DC 3-2 values DC 3-1

overview DC 7-2 changing imager parameters CM 5-30 changing password

administrator CM 1-3

operator CM 1-3 changing PCL imager parameters CM 5-34 channel

switching online and offline PJ 3-15 channel cable connector box SO 5-3 channel extender SJ 2-9 channel interface board SO 5-3 channel switching PJ 3-15 channel-attached

systems SO 5-3, SO 5-4 chapters, concatenating

DOS xcat DC 6-15

Sun OS/Solaris DC 6-19

Windows XCat DC 6-7–DC 6-12 character

codes PD 1-6

illegal PD 1-18–PD 1-20 characteristics, image PD 1-15 charpath operator PD 1-21 checking

dual stacker trays RM 2-1

feeder trays RM 1-1

stitcher/stacker trays RM 2-2 Chinese fonts PD 1-3 cleaning

4mm cartridge tape drive RM 6-1–RM 6-2

keyboard RM 6-1

monitor RM 6-1

Printer Controller exterior RM 6-1 clearing

feeder trays TG 4-1–TG 4-5

paper jams

area 3 TG 4-14–TG 4-15 area 4 TG 4-16–TG 4-18 area 5 TG 4-18–TG 4-20 area 7 TG 4-21–TG 4-23

area 8 TG 4-24 area 9 TG 4-24–TG 4-25 areas 1 and 1A TG 4-9–TG 4-11 areas 2 and 2A TG 4-11–TG 4-14

areas 6 and 6A TG 4-20–TG 4-21 stacker tray paper jams TG 4-27 stitcher/stacker tray paper jams (areas A

and B) TG 4-26–TG 4-27

client workstations

communicating with network SJ 1-5–SJ

1-6

overview SJ 1-1

CMYK default PJ 1-23 code examples, PostScript PJ 6-4 collating, PCL Copy command PD 2-6 color

adding IS 5-1 conditional processing IS 5-5 data driven IS 1-1, IS 5-3 evaluating output CM 15-2 full IS 5-2 lines and borders IS 5-8 mapping IS 5-3 overlays IS 5-7 shading IS 5-9 when to calibrate CM 15-1

color calibration SJ 2-21

procedure CM 15-2 work flow CM 15-5

color driver, Macintosh LaserWriter driver

8.x SJ 4-40 Color images SJ 2-5 color in forms DC 3-1, DC 3-6, DC 5-1 color limitations IS 9-1 color models, using IS 5-3 colors

presentation, matching PJ 1-14 preset PJ 1-14 rendering, automatic PJ 1-15 replacing PJ 1-16 saturation

converting PJ 1-14

specifying PJ 1-14 colorTables highlight color rendering PJ 1-14 colorToHighlight rendering PJ 1-14 command

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IS = IPDS Solutions Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

INDEX-4

Master Index

INDEX

job status SO 4-6 lpq SO 4-5

lpr SO 4-5 command sets SJ 3-5 commands

administrator, accessing CM 1-2

Cancel Documents PJ 3-4

canceling CM 1-2

Change Virtual Printer PJ 2-3–PJ 2-4

Configure utility CM 2-19–CM 2-29

control-D PD 1-17–PD 1-22

control-Z PD 1-18–PD 1-22

Copy Virtual Printer PJ 2-4

copying

accounting data to floppy CM 9-8 documents to floppy CM 2-3, CM 2-4

CM 2-5

logs CM 9-11 Create Virtual Printer PJ 2-2 Delete Virtual Printer PJ 2-4 deleting

accounting files CM 9-7, CM 9-9

fonts CM 10-4

forms CM 11-4

logs CM 9-12 Duplex, PCL PD 2-9 End, combining PJ 5-6 EndOfSet PJ 5-3–PJ 5-4 entering CM 1-1 font installation SO 2-5 Forward Document PJ 3-5 Hold Documents PJ 3-6 installing

fonts from disk CM 10-2

PCL fonts from disk CM 10-3 LCDS PD 3-2 licensing CM 2-15–CM 2-18 List Documents PJ 3-7–PJ 3-10 List Virtual Printers PJ 2-5 listing CM 1-1

CDROM fonts CM 10-6

floppy fonts CM 10-6

fonts CM 10-6

logs CM 9-10 listjob SJ 3-35 listq SJ 3-38

lpc (UNIX) SJ 3-57 lpq (DOS) SJ 3-53 lpq (UNIX) SJ 3-54 lpr SJ 3-41 lprm SJ 3-55 merge, inserting DC G-7 operator, accessing CM 1-2 PCL Copy PD 2-8–PD 2-9 PCL Paper Source PD 2-12 PJL PD 2-6 print SJ 3-24 printing

font list CM 10-8 font sample CM 10-8 form samples CM 11-3

,

PCL font sample CM 10-9 Promote Document PJ 3-11 Release Document PJ 3-11 Set IPDS Virtual Printer PJ 2-10 Set Scheduling Policy PJ 3-12 sets, installing PD 3-4 shortcuts CM 1-1 Show Document Attributes PJ 1-30 Show IPDS Virtual Printer PJ 2-10 Show Scheduling Policy PJ 3-13 Start PJ 3-13 Start Virtual Printer PJ 2-7 Stop PJ 3-14 telnet CM 1-4 terminating CM 1-2 utility CM 2-1–CM 2-13

communications, asynchronous PD 1-18 Compatibility fonts IS 4-11 complete media match PJ 4-6 completed sheets PJ 1-21 components

printer controller SO 2-2

components, curveto PD 1-33 compression

bar CM 2-3, CM 2-5, CM 2-6 ByteCode files DC 3-3, DC 5-2 quality PD 1-34 TIFF images PJ 6-4

compression tag, TIFF DC 8-5, DC E-1 concatenating chapters

DOS XCat DC 6-15

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IS = IPDS Solutions Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

INDEX-5

Master Index

INDEX

Sun OS/Solaris DC 6-19

Windows XCat DC 6-7–DC 6-12 conditional processing, adding color IS 5-5 conditioning paper SO A-4–SO A-5 conditions, print queue PJ 3-1 configuration

choosing remote printer or print server

CM 4-1–CM 4-3

differences between RPRINTER and

PSERVER CM 4-1–CM 4-3

configuration reports

printing CM 2-23 Configure utility

changeable parameters CM 2-20

options CM 2-23 Configure utility commands CM 2-19–CM

2-29

configuring

NFS daemon CM 13-2 configuring as PSERVER CM 4-4 configuring as RPRINTER CM 4-5 connections

AS/400 SJ 2-11–SJ 2-13

mainframes SJ 2-7–SJ 2-11

RS/6000 SJ 2-13–SJ 2-15 connections, Ethernet SO 4-4–SO 4-5 connectivity

multiple SO 4-7 connectivity boards SO 2-2 consistency

font PD 1-16 consumable supplies tables SO A-8 Continue button SO 3-4 continuous form, converting IS 4-18 control-D command PD 1-17–PD 1-22 controller

powering on CM 3-2 control-Z command PD 1-18–PD 1-22 conversion

arc-to-bezier PD 1-33

LCDS commands PD 3-2 conversion programs IS 8-1–IS 8-4 coordinates

device PD 1-1–PD 1-2, PD 1-32

user PD 1-1–PD 1-2, PD 1-39–PD 1-41 Copies attribute PJ 5-11

copies, multiple PJ 5-11 Copy Accounting to Floppy command CM

9-8

copy count

Macintosh drivers

AdobePS SJ 4-24 LaserWriter 7.x SJ 4-9

LaserWriter 8.x SJ 4-13 Quick Print for Windows NT 4.0 SJ 6-11 Windows NT 4.0 (transparent) SJ 5-17

Copy Documents to DOS Floppy command

CM 2-4

Copy Documents to Floppy command CM

2-3

Copy Documents to Tape command CM 2-4

,

CM 2-5

Copy IOT Fault Data to Disk command CM

2-18

Copy Logs to Floppy command CM 9-11 copy output PJ 1-9 Copy Virtual Printer command PJ 2-4 CopyCount attribute PJ 1-9 copying

documents to diskette CM 2-3 documents to DOS diskette CM 2-4 Documents to Floppy command CM 2-3

,

CM 2-4, CM 2-5 logs CM 9-11 print-job data CM 9-8 to tape CM 2-4, CM 2-5

copying to diskette CM 2-3 copypage PD 1-16 core interchange fonts IS 4-11 correcting color calibration CM 15-9 corruption problems

database CM 2-28 software CM 2-26

cover page

AdobePS driver SJ 4-27 Macintosh, LaserWriter 7.x driver SJ

4-10 Macintosh, LaserWriter 8.x driver SJ

4-15

Create Input Profile command CM 6-2 Create Output Profile command CM 6-2 Create Profiles command CM 6-2

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IS = IPDS Solutions Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

INDEX-6

Master Index

INDEX

Create Virtual Printer command PJ 2-2, DC

7-1 creating print queue, Novell PJ 3-16 creating profiles CM 6-2 current transformation matrix (CTM) PD 1-1 curves PD 1-25, PD 1-33 curveto components PD 1-33 custom fonts IS 4-12 customized forms DC 1-2 customized forms, forms

customized DC 1-3 cut sheet, converting IS 4-18 Cycle Exceptions DC 5-8 cycle up time DC D1-2, DC D1-7 CycleExceptions attribute PJ 1-9 CycleForm value DC 5-5 CycleForms attribute PJ 1-9, DC 5-5–DC 5-8

D

data

adding color IS 5-3

flushing PD 1-21

placement operators PD 3-2–PD 3-3

streams SJ 2-5

towers SJ 2-6

transfer protocol PJ 3-5 Data 1 fonts IS 4-12 data base mode PD 3-2

See also line mode Data Control Interface Module (DCIM2) card

SO 2-2

data flows

AS/400 IS 10-5

mainframe

MVS AFP IS 10-1 MVS for remote printer IS 10-2 VM IS 10-3

VSE IS 10-4 PS/2 IS 10-5 RS/6000 IS 10-6

data streams SO 5-1, SO 5-5 database

corruption CM 2-28

date, setting CM 7-1 DCF/Script IS 5-8 Decomp DC 1-3

Decomp Service Install Options screen DC

2-1

decomposed forms

directory location DC 4-3, DC 6-3

file formats DC A-1–DC A-4 decomposing Background Forms DC 5-3 decomposing time

reducing PJ 5-13 Decomposition Service

application examples DC 1-2–DC 1-4

benefits DC 1-1, DC 1-6

examples DC G-1–DC G-7

installing

DOS DC 2-2 overview DC 2-1 Windows DC 2-1

overview DC 1-1 Decomposition Service Tools, installing SJ

2-6, SJ 2-15

default

font PD 1-3

user coordinate system PD 1-39–PD

1-41 default color rendering PJ 1-20 default Grayscale PJ 1-23 default settings

resetting job ticket

Quick Print for Windows NT 4.0 SJ

6-8

Windows NT 4.0 (transparent SJ 5-15

defaults

Jog command PJ 5-10 media specifications PJ 4-2 media values PJ 4-2 media, setting CM 5-2 options, listing CM 5-28

scheduling policy PJ 3-12 defining forms, Novell PJ 2-9 definitions, nonstandard PD 1-11–PD 1-12 Delete Accounting command CM 9-9 Delete Color Calibration command CM

15-10, CM 15-11 Delete Fonts command CM 10-4 Delete Form command DC 7-4 Delete Forms command CM 11-4 Delete Logs command CM 9-12

CM = Guide to Configuring and Managing the System DC = Decomposition Service and Tools Guide IS = IPDS Solutions Guide IS = IPDS Solutions Guide PD = Guide to Using PDL PJ = Guide to Managing Print Jobs RM -Guide to Performing Routine Maintenance SJ = Guide to Submitting Jobs from the Client SO = System Overview Guide TG = Troubleshooting Guide

INDEX-7

Master Index

INDEX

delete output profile command CM 6-3 Delete Virtual Printer command PJ 2-4, DC

7-4

deleting

accounting files CM 9-9 fonts CM 10-4 forms DC 7-4, CM 11-4 logs CM 9-12

virtual printers DC 7-4 Deleting Input|Output profiles CM 6-3 delimiters, EOF PD 1-18–PD 1-20 delimiting PostScript jobs PD 1-17–PD 1-18 delivery instructions, print job SJ 6-14 demo mode, VIPP PD 3-3 developer SO A-6 Device Control command set SJ 3-6 device-dependent operators TG 5-2 devices

coordinates PD 1-1–PD 1-2, PD 1-32

dependent features PD 1-29–PD 1-33 DFA group number PJ 1-10 DFA maximum set size PJ 1-10 DFA support IS 1-2, IS 5-14 diagnostic data, gathering CM 2-18 Diagnostic Lockout feature IS 6-2 diagnostic tools SO 1-5 dialog box options, customizing Quick Print

for Windows NT 4.0 SJ 6-25

dictionary operators

Execution PD 1-11

IdleTime PD 1-10

Printer PD 1-10–PD 1-11

Server PD 1-9

Status PD 1-10

System PD 1-8

User PD 1-8–PD 1-9 Direct Bus and Tag SJ 2-7 directories

forms location

decomposed forms DC 4-3, DC 6-3 non-default DC B-1

installation

Windows DC 2-2

Xcat jobs default DC 6-12 directory

queue PJ 3-17

required, DocuPrint file system PJ 6-3 Disable Modem command CM 2-31 Disable Remote Shell command CM 2-32 disk space, installation requirements SJ 2-1 diskette

copying documents to CM 2-3

copying documents to DOS CM 2-4

ejecting CM 2-2

formatting CM 2-2

installing licenses from CM 2-17

installing software updates from CM 2-7

listing files on CM 2-3

printing documents from CM 2-9 diskettes SO A-7

contents, listing CM 2-3

ejecting CM 2-2

formatting CM 2-2 Display Billing Meters command CM 8-8 displaying

date CM 7-1

logs CM 9-10

PDL code CM 2-6

time CM 7-1 displaying PDL code CM 2-6 displaying virtual printers PJ 2-5 disposition attributes

examples DC 3-7, DC 4-3, DC 7-3

Mask, Form formats DC 3-3–DC 3-6

Tiff/G4, ByteCode formats DC 3-2

values DC 3-1, DC 7-3 dividing print jobs PJ 5-1 document attributes PJ 1-1 Document Feeding and Finishing

Architecture,

see

DFA Document Structure Editor (DSE) DC 9-1 Document Structuring Conventions (DSC)

PJ 4-2 document types IS 1-8 DocumentID attribute PJ 1-11 DocumentName attribute PJ 1-11 documents

attributes PJ 1-1

changing PJ 1-29

list PJ 1-2