Xantrex XPL30-2D Spec Sheet

www.xantrex.com
© 2004 Xantrex Technology Inc. All rights reserved. Xantrex is a registered trademark of Xantrex International. DS20040609R04_xpl. Printed in Canada
Xantrex Technology Inc.
Headquarters
Burnaby, British Columbia
Canada V5A 4B5
604 422 8595 Phone
800 667 8422 Sales & Support
604 421 3056 Fax
prg.info@xantrex.com
5916 195th Street NE
Arlington, Washington
USA 98223
360 435 8826 Phone
360 925 5144 Fax
Edificio Diagonal 2A,
C/ Constitución 3, 4º2ª
08960 Sant Just Desvern
Barcelona, Spain
General Tel: +34 93.470.5330
General Fax: +34 93.473.6093
XPL Series
30 to 125W Laboratory DC Power Supply
High Performance Low Cost Bench DC Power Supply
The Xantrex XPL series has been designed to meet the need for compact power supply at a reasonable
price. The XPL series provides 30 to 125 watts of programmable linear DC power. The XPL is a compact,
high performance low cost power supply suited for benchtop applications.
The XPL Series uses linear regulation for high performance. The XPL Series features excellent line and
load regulation with low noise and good transient response. The XPL Series is available in a single, dual
and triple output for benchtop use.
The XPL dual output model has two independent and isolated outputs each with a 0 to 30V, 0 to 2A
capability and its own on-off switch. The outputs can be wired in either series or parallel to provide
voltages up to 60 volts or currents up to 4 amps. All outputs are instrinsically short circuit proof, and
are protected against external voltages and reverse currents. The XPL triple output model has the same
features as the dual output model with an additional switchable fixed output of 3.3V and 5V.
Product Features
30 to 125W Laboratory DC Power Supply
30-2T
0-30 V
0-2 A
3
125 W
in constant voltge mode. Typically > 50k
in constant current mode
- 40 °C to + 70 °C
Silent fan-less convection cooling
Complies with EN61010-1
Complies with EN61326
6.3 x 10.2 x 11.6”/160 x 260 x 295 mm (XPL 30-2D, XPL 30-2T)
7.5 lb
1A minimum
Loading...