
ARCHITECTURAL AND ENGINEERING SPECIFICATIONS
AIRSPEED™ AND NO TOUCH™ HAND DRYERS
AIRSPEED ™ MODEL WA
with Recessing Kit
FAC TS
Saves up to 95% of paper towel costs
Reduces maintenance costs, vandalism
and mess associated with paper towels
Saves trees from becoming paper towels
Reduces burden on clogged landfills
Uses less energy and produces fewer
greenhouse gases than the production
of paper towels
FE ATU RE S
Quiet induction brushless motor, no
need to replace brushes
Tamper resistant screws lock cover
securely to base
Resilient motor mounting rings and
factory-lubricated, self-aligning bearings
for long motor life
Dynamically balanced blower wheel for
vibration-free running
Heating element is side-mounted at
blower air inlet, designed for maximum
heat transfer, with auto shut-off safety
features controlled by an internal
thermostat
Designed for light traffic or noise
sensitive areas
AIRSPEED ™ MODEL WA
Surface Mounted
NO TOUCH ™ MODEL NT
Surface Mounted
AIRSPEED™ AND NO TOUCH™ SPECIFICATIONS
Airspeed™ and No Touch™ hand dryers shall be manufactured by or for
World Dryer Corporation® to
Front panel shall be in ebony gloss for the NoTouch™ and brushed aluminum
for the Airspeed™. Housing to be finished with chrome plating or white epoxy
paint. Motor shall be of shaded pole (brushless) type operating at maximum
3200 RPM at rated load, delivering 98 cubic feet per minute of air volume
(5300 LFM). Timer shall be electromechanical cam style with 25 amp rated
switch to operate dryer for 30 seconds on push button units. No Touch™
dryers shall be activated by means of an infrared emitting/receiving electronic
control device. Recessed kits will include a 16 gauge steel wall-mounting box.
Hand dryers shall be listed under reexamination service of Underwriters
Laboratories, Inc.
include housing of .08“ thick die cast aluminum.
SPECIFIER'S APPROVAL
Job __________________________________ Date _________________
Model Number ______________________ Housing Option ___________
Quantity ______________ Recess Kit (KNTR-973) __________________
Variations _____________________________________________________
Customer/Wholesaler ___________________________________________
Contr
actor _____________________________________________________
Ar
chitect/ Engineer ______________________________________________
WA RR A NT Y
5 year limited
5700 McDermott Drive | Berkeley, IL 60163 | 800-323-0701 | 708-449-6950 | Fax 708-449-6958 | www.worlddryer.com
Electronic specifications available online: www.worlddryer.com/specs

EL E CT RICA L
SP E CI FICAT IO NS
Freq
60 Hz
60 Hz
2000
1500
8.5
13
120
208/240
---
NT246
ELECTRICAL
No Touch
60 Hz
2000
Watts
17
Amps
120
Volts
NT126
Automatic
50 Hz
1800
8
230
NT235*
10.9"
(277 mm)
S U R FA C E MO U NT E D
11.6"
(295 mm)
3.5"
R E C E S S
M O U N T ED
5.5 "
(140 mm)
(89 mm)
MODEL NUMBER
Airspeed
Push button
WA235*
WA126-2
* Export Models only
WA246
WA126
PLANNING GUIDE
RECESS KITS
In order to recess dryers, specify a
recess kit in addition to the dryer.
Includes steel mounting box with
chrome trim.
Specify Kit: KNTR-973
QUANTITY ESTIMATE
Average traffic:
1 dry
er per 2 washbasins
Hea
vy traffic:
1 dry
er per washbasin
54” Br
adley sink:
4 dryers per sink
INSTALLATION
Hand dryers require a dedicated
20 AMP circuit, and must be
properly grounded. GFI circuit
protection is recommended. One
side of dryer should be mounted
to a stud.
DRYER PLACEMENT
Hand dryers should be placed at
least 2 feet apart, near but not
over the washbasin. In congested
areas dryers should be placed to
create a traffic flow from wash
basin to dryer to exit. Automatic
dryers should be placed more
than 18” above or away from
projections, which may interfere
with the operation of the
automatic sensor.
12"
(318 mm)
WA L L B O X
11.75"
(298 mm)
OR D ER ING I N FO RMATI ON
When specifying and/or ordering hand dryer include the model number
with the cover option. (ie. WA126-002)
COVER OPTIONS
MODEL
Airspeed™
No Touch™
Chrome
001
004
MODEL WA™
White Housing
White
002
005
MODEL NT™
Chrome Housing
MEASUREMENTS
MOUNTING
STYLE
Surface
with Optional
Recessed Kit
10-29/32" W x 11-5/8" H x 7-1/2" D
12-3/4" W x 13-1/2" H x 5-1/2" D
UNIT
MEASUREMENTS
SHIPPING
WEIGHT
22 lbs
31 lbs
RECESS
MOUNTED
SIDE VIEW
.2" (5 mm) diameter
Electrical Knockouts
.8"(22 mm) / 1.1"(28 mm)
1.25"
(32 mm)
1.25"
(32 mm)
Drawings not to scale
MOUNTING HEIGHTS
Surface Recessed
Men
Women
Children
ages 3-7
Children
ages 8-10
Children
ages 11-13
Children
ages 14-17
Disabled
Measured from floor to the bottom of the unit
SHIPPING
DIMENSIONS
13" L x 12" W x 9-1/2" H
16" L x 15" W x 14" H
46" (117cm)
44" (112cm)
32" (81cm)
36" (91cm)
40" (102cm)
44" (116cm)
37" (94cm)
8 locations
8 locations
42" (107cm)
40" (102cm)
28" (71cm)
32" 81cm)
36" (91cm)
40" (102cm)
34" (86cm)