Wilbur Curtis CAP-1 Installation Manual

CLEANING CURTIS AIRPOTS

We recommend a regular and careful inspection of the Curtis airpot to ensure optimum perfor­mance. It is important to properly clean the airpot after use to maintain a safe and healthy
product.

1. Clean the exterior surfaces with a moist soft cloth and wipe dry.

2. Use a mild solution of dishwashing detergent and warm water to clean inside the liner.

A

Scrub with a sponge brush A .

3. Inspect and clean around the top of liner neck area B.

B

4. After cleaning, thoroughly rinse the inside liner and other cleaned parts with hot water.

5. Run warm water through the stopper/spout assembly and dry.

CAUTION

!

Do not immerse in water.
Do not place in dishwasher.
Do not use harsh powders or cleansers containing chlorine
(chlorine could create pits on stainless steel surfaces).

WILBUR CURTIS COMPANY, INC.

6913 Acco Street, Montebello, CA 90640-5403
Telephone: [phone]
Fax: [phone]

find the latest on the web at

www.wilburcurtis.com

2/04 . F-3333 rev NC