Additional Security - Presence sensors and remote control Security systems
Height Adjustment- Handles and blades.
Torque Specifications - Blade fasteners A and B ratio
Warranty - 2 years
Frequently Asked Questions
Q: What should I do if the engine fails to start?
A: Make sure that the blade wire and the control plugin are connected and in the right position, And check that the control throttle is not in the wrong place, Also check if the fuel tank has clean gasoline.
Q: Mien the mower can I operate it on a slope?
A: Caution against using a mower on slopes higher than 15 degrees to avoid slipping and resulting serious injuries. Make sure the slope is mowed across the vertical plane - like a fence.
Q: Is there a way to cut taller or shorter pieces with my mower?
A: The mower has a wheel-positioning adjusting plate with a thumb lever and allows for nine height positions. Every wheel must always be set to the same cutting height.
Q: Should I warm up the mower before powering it up to cut?
A: Make sure no one is in the way, verify there is no contact issue with the drive clutch control, and check that the throttle control leaver is set to FAST.
Q: What are some of the maintenance practices that one needs to adhere to when using a mower?
A: Preventative maintenance practices include lubricating moving components, inspecting the blade component for any irregularities, and washing the mower deck after every session. For any other to do instructions with regard to the engine, check the engine manual.
Q: Esqué est iin gemetexion frein ad ne disa acntre vibratios lere tized mwahiri sare gu na mku gappem?
A: The excessive can also indicate that the cutting blade is loose or unbalanced. Turn off the engine and unplug the spark plug wire then proceed to check the blade fittings and damage.
User Manual
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.
Loading...