Whirlpool WFE 1070BD INSTRUCTION FOR USE

30106271GB.fm Page 1 Monday, March 30, 2009 6:24 PM

AUS (GB) WFE 1070 BD PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

C D

}

A B

E. Programme selector

F. “Start (Pause)” button G. Programme sequence indicator H. “Reset” button

Max

Programme

95 °C

Cotton

60 °C

Cotton

30 - 40 °C

60 °C

Synthetics

40 °C

Daily wash

30 - 40 °C

Delicates

30 °C

30 - 40 °C

Handwash

30 - 40 °C

Rinse & Spin

Spin

Gentle Spin

Drain

optional / Yes : dosing required

❉

For improved garment care, spin speed is restricted in this programme.

Do not use liquid dergent for the main wash.

Care

Labels

— — — ——

Load

- Respect the manufacturer’s recommendations on the care label.

Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).

6.5 This programme eliminates bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has been

tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.

7.5 Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

6.5 Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends

3.0

with cotton.

This programme includes a prewash cycle.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or

3.0 blends with cotton.

4.0 Slightly to normally soiled textiles made of cotton and/or synthetics.

1.5 Curtains and delicate clothing, dresses skirts, shirts and blouses.

4.0 Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

Only woollens, labelled with the Woolmark and identified as machine washable.

1.0 This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

1.0 Textiles made of linen, silk, wool and viscose marked as “handwashable”.

7.5

Same as the last rinse and the final spin in the “Cotton” programme.

7.5

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

1.0

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. Water is drained only without any spinning.

Type of wash/Notes

The wool cycle of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0620

Detergents and additives Special options

Pre-

wash

Main

Softener Half

wash

Ye s

❉❉❉

—

Ye s

—

— ——

—— — —— —

speed

Rinse

❉ ❉

hold

— —

Spin

Speed

rpm

1000

400

1000 1000 1000

—— — ———

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06271

Black process 45.0° 150.0 LPI

30106271GB.fm Page 2 Monday, March 30, 2009 6:24 PM

PROGRAMME DATA

Programme

Cotton

Te m p e r a t ur e

(°C)

95 6.5 2:10 60 7.5 2:40

Load

(kg)

Approx. Programme Duration

(hours : minutes)

Cotton 40 6.5 2:05

60 3.0 1:53

Synthetics 40 3.0 1:20

Daily wash 40 4.0 1:00

Delicates 30 1.5 0:45

30 4.0 0:30

40 1.0 0:45

Handwash 40 1.0 0:40

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Reference Programme for Energy and Water labeling.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in your Instructions for Use. Close the door and turn the

programme selector

to the desired programme and temperature. The indication lamp next to the

“Start (Pause)”

button blinks.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lamp lights up.

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Half speed” button

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

• If you select “Rinse hold”, do not leave the laundry items to soak for too long.

The programme stops to “Rinse hold” at

Note:

the time the “Rinse hold” light in the programme sequence indicator is on. The indication lamp next to the

“Start (Pause)”

Terminate the “Rinse hold” option:

•Press the

“Start (Pause)”

button; the programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector to the “Drain” programme and press the

“Start (Pause)”

• Reduces the predetermined automatic maximum spin speed to treat your laundry more gently.

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics”, “Daily wash” and “Delicates”.

button blinks.

button.

PROGRAMME START

Open the taps and press the

“Start (Pause)”

The indication lamp next to the

“Start (Pause)”

button.

button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

When the programme phase is finished, the corresponding indication goes off.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your “Instructions for Use”; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water taps; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water taps.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

“Start (Pause)”

button to pause the

programme. The light blinks.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the

“Start (Pause)”

button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

“Reset”

button cancels a programme before

the end.

•Press the

“Reset”

button for at least 3 seconds. Any existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06271

Black process 45.0° 150.0 LPI