WHIRLPOOL WFCR75230 Use & Care

產品安全指引、使用說明及安裝指南

Model : WFCR 75230

產品型號

WFCR 75230

繁體中文

THANK YOU FOR BUYING AN WHIRLPOOL PRODUCT.

For even more complete user support, register your appliance at www.whirlpool.com.hk

User manual

Index

Health and Safety guide

SAFETY INSTRUCTIONS . . .... ....... ... .............................. . ................. ...... 5

IMPORTANT TO BE READ AND OBSERVE ................................................................ 5

PRODUCT DESCRIPTION . . ... ... ... ... ................ .................. .... .... .... .... .... . 7

APPLIANCE ........................................................................................... 7

CONTROL PANEL ...................................................................................... 7

DETERGENT DISPENSER ............................................................................... 8

TECHNICAL SPECIFICATIONS FOR THE WATER CONNECTION ............................................ 9

DOOR ................................................................................................ 9

HOW TO USE THE APPLIANCE . . .... ......... . . ........................................... .... 10

FIRST TIME USE ..................................................................................... . 10

DAILY USE .......................................................................................... .10

HINTS AND TIPS ..................................................................................... .12

PROGRAMME CHART ................................................................................ .13

PROGRAMMES ...................................................................................... .14

OPTIONS AND FUNCTIONS .......................................................................... .15

CLEANING AND MAINTENANCE . . ... ... ... . .... . . ..

............................. .... .... .... . 16

CLEANING THE WASHER DRYER EXTERNALLY ......................................................... . 16

CHECKING THE WATER INTAKE HOSE ................................................................. .17

CLEANING THE FILTERS IN THE WATER INTAKE HOSE .................................................. . 18

ENGLISH

USER MANUAL

CLEANING THE DETERGENT DISPENSER .............................................................. .19

CLEANING THE WATER FILTER / DRAINING THE RESIDUAL WATER ...................................... . 20

TRANSPORT AND HANDLING ........................................................................ .22

TROUBLESHOOTING . . ... ... ... ... ... ................................ .... .... .... .... .... ... 23

CUSTOMER SUPPORT SERVICE ....................................................................... . 25

INSTALLATION GUIDES .............................................................................. . 49

Health & Safety guide

SAFETY INSTRUCTIONS

IMPORTANT TO BE READ AND OBSERVE

Before using the appliance, read these safety instructions. Keep them nearby for future reference. These instructions and the appliance itself provide important safety warnings, to be observed at all times. The manufacturer declines any liability for failure to observe these safety instructions, for inappropriate use of the appliance or incorrect

setting of controls.

kept away from the appliance. Young children

appliance unless continuously supervised.

persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this appliance only if they are supervised or have been given instructions on safe use and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision. Never open the door forcibly or use it as a step.

PERMITTED USE

CAUTION: The appliance is not intended to

be operated by means of an external switching device, such as a timer, or separate remote controlled system.

This appliance is intended to be used in

working environments; farm houses; by clients in hotels, motels, bed & breakfast and other residential environments.

Do not load the machine above the maximum capacity (kg of dry cloth) indicated in the programme table.

This appliance is not for professional use. Do not use the appliance outdoors.

Do not use any solvents (e.g. turpentine, benzene), detergents containing solvents, scouring powder, glass or general purpose

wash fabrics that have been treated with

Do not dry unwashed items in the tumble

dryer.

Items that have been soiled with substances

such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer.

Items such as foam rubber (latex foam),

shower caps, waterproof textiles, rubber backed

rubber pads should not be dried in the tumble dryer.

Fabric softeners, or similar products, should

instructions.

without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be damaged.

Never stop a tumble dryer before the end of

the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.

During the drying phase, the door tends to

get quite hot.

Do not use the appliance to dry clothes that

(e.g. trichlorethylene).

Do not use the appliance to dry foam rubber

or similar elastomers.

Make sure that the water tap is turned on

during the drying cycles.

Remove all objects from pockets such as

lighters and matches.

INSTALLATION

The appliance must be handled and installed

. Use

cuts. If you want to stack a dryer on top of your

Service or your specialist dealer to verify whether this is possible. This is only possible if the dryer is attached to the washing machine by means of appropriate stacking kit available through our After- Sales Service or your specialist dealer.

Move the appliance without lifting it by the worktop or top lid.

Installation, including water supply (if any) and electrical connections and repairs must be

. Do not

repair or replace any part of the appliance

. Keep children away from the installation site. After unpacking the appliance, make sure that it has not been damaged during transport. In the event of problems, contact the dealer or your nearest After-sales Service. Once installed, packaging waste (plastic, styrofoam parts etc.)

Health & Safety guide

. The appliance must be disconnected

from the power supply before any installation

. During installation,

make sure the appliance does not damage the

. Only activate the appliance when the installation has been completed.

Do not install your appliance where it may be exposed to extreme conditions, such as: poor ventilation, temperatures below 5 °C or above 35 °C.

When installing the appliance make sure that

adjusting them as required, and check that the appliance is perfectly to level using a spirit level.

If the appliance is being installed on wood or

appliance on top of this.

Connect the water inlet hose(s) to the water supply in accordance with the regulations of your local water company.

the hot water supply.

bolts to prevent any possible damage to the interior during transport. Before using the machine, it is imperative that the transport bolts are removed. After their removal, cover the openings with the 4 enclosed plastic caps.

After installation of the device, wait a few hours before starting it so that it acclimates to the environmental conditions of the room.

Make sure that the ventilation openings in the base of your washing machine (if available on your model) are not obstructed by a carpet or other material.

Use only new hoses to connect the appliance to the water supply. The old hose-sets should not be reused.

The supply water pressure must be in the

0.1-1 Mpa range.

ELECTRICAL WARNINGS

It must be possible to disconnect the appliance from the power supply by unplugging it if plug is accessible, or by a multipole switch installed upstream of the socket in accordance with the wiring rules and the appliance must be earthed in conformity with national electrical safety standards.

Do not use extension leads, multiple sockets

or adapters. The electrical components must not be accessible to the user after installation. Do not use the appliance when you are wet or barefoot. Do not operate this appliance if it has a damaged power cable or plug, if it is not working properly, or if it has been damaged or dropped.

If the supply cord is damaged, it must be replaced with an identical one by the manufacturer, its service agent or similarly

risk of electric shock.

CLEANING AND MAINTENANCE

WARNING: Ensure that the appliance is

supply before performing any maintenance operation; never use steam cleaning

DISPOSAL OF PACKAGING MATERIALS

The packaging material is 100% recyclable and is marked with the recycle symbol

. The various parts of the packaging must therefore be disposed of responsibly and in full compliance with local authority regulations governing waste disposal.

DISPOSAL OF HOUSEHOLD APPLIANCES

This appliance is manufactured with recyclable or reusable materials. Dispose of it in accordance with local waste disposal regulations. For further information on the treatment, recovery and recycling of household electrical appliances, contact your local authority, the collection servi

ce for household waste or the store where you purchased the appliance. This appliance is marked in compliance with European Directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent negative consequences for the environment and human health.

The symbol

on the product or on the accompanying documentation indicates that it should not be treated as domestic waste but must be taken to an appropriate collection center for the recycling of electrical and electronic equipment.

PRODUCT DESCRIPTION

User manual

APPLIANCE

CONTROL PANEL

1. Top

2.Detergent dispenser

3.Control Panel

4. Lid handle

5.Door 6

kick panel

7.Removable kick panel

8. Adjustable feet (2)

3. 4.

2. Programme selector

3.Start/Pause button

4.Temperature button

5. FreshCare+ button

6.Dry Only button / Lock

button

Drying settings button

8. Display

Start delay button

10. 6.

10.Spin speed button

DETERGENT DISPENSER

Prewash Compartment

• Detergent for prewash

Main Wash Compartment

• Detergent for the main wash

• Stain remover

• Water softener

Softener compartment

• Softener

• Liquid starch

Pour softener or starch solution into the compartment without exceeding the “max” level.

Release button

(press to remove tray for cleaning).

Preferably use the partition A when washing with a liquid detergent for washing, to ensure that the correct quantity of detergent is used (the partition is included in the bag containing the instructions). Move the partition into slot B when using detergent powder.

TECHNICAL SPECIFICATIONS FOR THE WATER

CONNECTION

INPUT WATER Cold

WATER TAP

MINIMUM WATER INTAKE PRESSURE 100 kPa (1 bar)

MAXIMUM WATER INTAKE PRESSURE 1000 kPa (10 bar)

DOOR

To open the door, pull the handle. To close the door, push on the handle until it clicks.

HOW TO USE THE

APPLIANCE

FIRST TIME USE

See the section DAILY USE for instructions on selecting and starting a programme.

FIRST CYCLE OPERATION

Remove any manufacturing debris:

1. Select the “Cotton” programme with a temperature setting of 60 °C

2. Pour a small quantity of detergen powder

of the de of the q recommen

into the main wash compartmen

tergent dispenser (maximum 1/

uantity the detergent manufacture

ds for lightly soiled laundry).

DAILY USE

3. Start the programme without loading the washer dryer machine (with empty drum).

For more information on functions, a more detailed guide may be requested or downloaded from the website following the instructions given on the last page.

1. LOADING LAUNDRY.

• Prepare the laundry, following the recommendations given in the section “HINTS AND TIPS”. - Open the door and load the laundry into the drum, without exceeding the maximum load capacities indicated in the

• Close the door, pressing until the latch audibly locks, and check that there is no laundry trapped between the door glass and the rubber seal.

Programme Chart.

2. OPEN THE WATER TAP

Check that the washer dryer is connected correctly to the water mains Open the water tap.

3. SWITCHING ON THE WASHER DRYER

MACHINE.

Press button

; the lamp .

4. SELECTING A PROGRAMME AND

CUSTO

functions are possible with this appliance:

• Wash only

• Wash and dry

• Dry only

MISING A CYCLE.

The following

Wash only

Select the required programme with the PROGRAMME selector dial. The duration of the wash cycle is shown on the display. The washer dryer machine automatically displays the maximum temperature and spin speed settings possible for the selected programme. Adjust the temperature and/or spin speed settings if needed with the relative buttons.

• Press button “Temp°” to cycle through progressivel lower temperature

-“) shown on display.

• Press button “Spin speed” to cycle throug progressively lower spin speed settings until the

Pressing the button again sets the highest possible setting.

Select the required options (if necessary).

• Press the button to select the option; the respective button lamp illuminates.

• Press the button again to cancel the option; the lamp extinguishes.

! If the selected option is not compatible with the programme set, an error warning tone sounds

option is not selected.

Wash and dry

To wash and dry a load with no interruption between the wash and dry cycles, make sure that the load does not exceed the maximum permissible drying load for the selected programme (see the column “Max. load for drying cycle” in the Programme chart).

settings until cold wash is set (“-

. The

1. Follow the instructions given in the paragraph “Wash Only” to select and, if necessary, customise the required programme.

2. Press “Drying settings” to select the required drying mode. Two drying modes are available: automatic or timer.

- Automatic drying with selectable levels: In automatic drying mode, the washer dryer machine dries the laundry until the set level of dryness is reached. Pressing button “Drying settings” once automatically selects the highest drying level available for the selected programme. Press the button again to reduce the drying level.

The following levels are available: Wardrobe ready to be put away in the wardrobe without ironing. Hanger minimise creasing. Garments must be hung to air dry completely. Iron make ironing easier.

- Timer drying mode:

Press button “Drying settings” repeatedly to set timer drying mode. After cycling through all the automatic drying levels, continue pressing button “Drying settings” until the desired time is displayed. Values from 210 to 30 minutes are settable.

To wash a load of laundry larger than the maximum permissible load for drying (see the column “Max. load for drying cycle” in the Programme chart), remove a few garments once

the drying cycle. Proceed as follows:

1. Follow the instructions given in the paragraph “Wash Only” to select and, if necessary, customise the required programme.

2. Do not include a drying cycle.

3. door and remove a few garments to reduce the load. Now follow the instructions for “Dry only”.

N.B.: always allow a cooling down period after drying before opening the door.

When using the two preset cycles “Wash & Dry 45’” and “Wash & Dry 90’”, it is not necessary to select and start a drying cycle.

Dry only

This function is used to simply dry a wet load washed previously in the washer dryer or by hand.

1. Select a suitable programme for the laundry

you want to dry (e.g. select cotton to dry wet cotton laundry).

2. Press button “Dry only” to dry without a wash cycle.

3. Press “Drying settings” to select the required

drying mode. Two drying modes are available: automatic or timer.

: laundry is completely dry and

: laundry is left slightly damp to

: garments are left reasonably damp to

- Automatic drying with selectable levels:

In automatic drying mode, the washer dryer machine dries the laundry until the set level of dryness is reached. Pressing button “Drying settings” once automatically selects the highest drying level available for the selected programm Press the button again to reduce the drying level.

The following levels are available: Wardrobe ready to be put away in the wardrobe without ironing. Hanger minimise creasing. Garments must be hung to air dry completely. Iron make ironing easier.

- Timer drying mode:

: laundry is completely dry and

: laundry is left slightly damp to

: garments are left reasonably damp to

5. USING THE CORRECT AMOUNT OF

DETERGENT. Pull out the tray and pour

detergent into the relative compartments as described in “Detergent dispenser”. This is only necessary when using a wash only or a wash + dry programme.

6. DELAYING THE START OF A PROGRAMME.

set a programme to start at a later time,

see the section “Options and Functions”.

7. STARTING A PROGRAMME.

Press the START/PAUSE button. The relative indicator lamp illuminates, the door locks and the door open change a programme while a cycle is in progress, press START/PAUSE to pause the washer dryer

then select the required cycle and press START/ PAUSE again. To open the door while a cycle is in progress, press START/PAUSE; the door may be opened if the PAUSE button again to resume the programme from where it was paused.

symbol extinguishes. To

symbol lights. Press the START/

Press and hold the button until the washer dryer stops. If the water level and temperature are low enough, the door unlocks and may be opened. The door remains locked if there is water in the drum. To unlock the door, switch the washer dryer on, select the

speed to 0. The water is emptied and the door unlocks at the end of the programme.

SPIN & DRAIN programme and

9. SWITCHING THE WASHER DRYER OFF AT THE

END OF A PROGRAMME.

At the end of the cycle, the message “END” is shown on the display. The door can only be opened when the the door unlocked symbol is lit, then open the door and take out the laundry. Press energy, if the washer dryer is not switched

automatically approximately 30 minutes after the end of the programme. Leave the door ajar to let the interior of the washer dryer dry.

symbol lights. Check that

. To save

HINTS AND TIPS

RULES FOR SEPARATING LAUNDRY

• Fabric type / indications on label (cotton, mixed

• Colour (separate coloured garments from whites, wash new coloured items separately)

•

distribution in the drum)

• Delicates (place small items – such as nylon stockings – and garments with clasps – such as braziers – in a laundry bag or in a pillow case with a zip).

EMPTY POCKETS

• Objects such as coins or safety pins can damage laundry and the washer dryer drum.

WASH SYMBOLS ON GARMENT LABELS

The value given in the tub symbol is the maximum temperature possible for washing the garment.

Normal mechanical action

Reduced mechanical action

Much reduced mechanical action

CLEAN THE WATER FILTER REGULARLY

• and preventing the water from draining correctly. See the section “Cleaning and Maintenance” /

in the detailed guide that may be requested or downloaded from the website.

SAVING ENERGY AND PROTECTING THE ENVIRONMENT

• Keeping within the load limits indicated in the programme chart will optimise energy, water and detergent consumption and reduce washing times.

• Do not exceed the detergent quantities recommended by the detergent manufacturer.

• Save energy by using a 60°C instead of a 90°C wash programme, or by using a 40°C instead of a 60°C wash programme. We recommend using the “ garments, which is longer but uses less energy.

• To save energy and time when washing and drying, select highest spin speed available for the programme to reduce the residual water remaining in the garments at the end of the wash cycle.

WWW

Cotton ” 60°C programme for cotton

Hand wash only

Do not wash

PROGRAMME CHART

Detergents and

additives

Recommend-

ed detergent

Programme

MIXED

SYNTHETICS

RAPID 30’

SPORT

WASH & DRY 45’ 30°C 1200 1 1 - -

WASH & DRY 90’ 30°C 1200 2 2 - -

SPIN & DRAIN *

RINSE & SPIN - 1200

WHITE

COTTON

WOOL

DELICATES

COLOURS 15° 15°C 1000 4.5 4.5 - -

Available tempera-

tures

Max. spin speed

(rpm)

Dry Only

Max. load for wash

cycle (kg)

Max. load for dry-

ing cycle (kg)

Duration

(H: Minutes)

Fresh Care +

- 40°C

- 60°C

- 30°C

- 40°C

- 90°C

- 60°C

- 40°C

- 30°C

1000

1200

800 - 3.5 - -

600

- 1200 7 5 - - - - -

1200

800

4.5 4.5 - -

7 5 -

4.5 4.5 -

4 4 - -

7 5 - - - -

7 5

7 5 -

2 2 - -

1 1 - -

0:59

3:50

3:25

0:30

1:45

0:45

1:30

0:10

0:50

2:40

3:20

1:35

1:10

1:30

Prewash

(90°)

Main

Softener

Powder

Liquid

Selectable/optional

For wash programmes with temperatures above 50°C, we recommend using powder detergent rather than liquid, and following the directions given on the detergent package.

Not selectable/applicable Required quantity Optional quantity

* Select the SPIN & DRAIN programme and set the spin speed to 0 to empty only.

1) Test programme in compliance with standard EN 50229 (Wash): select the “

2) Long cotton programme: set the “Cotton“ programme with a temperature of 40°C.

Test programme in compliance with standard EN 50229 (Drying): select the “ Cotton “ wash programme and set the drying level to “ ”, for both loads. .

The cycle duration indicated on the display or in the manual is an estimated time calculated for standard conditions. The actual cycle time may vary in relation

and any additional optional functions selected.

Cotton ” programme with a temperature of 60°C.

PROGRAMMES

Follow the directions indicated in the garment wash symbols.

MIXED

For washing lightly to normally soiled resilient

COTTON

for washing normally to heavily soiled towels, underwear, table and bed linen etc. in resilient

cotton and linen.

SYNTHETICS

for washing normally soiled garments made from

viscose etc.) or cotton/synthetic blends.

RAPID 30’

for washing lightly soiled garments quickly: this cycle lasts only 30 minutes, saving time and

energy. Maximum load 3.5 Kg.

WHITE

For washing normally to heavily soiled towels, underwear, table and bed linen, etc in resilient cotton and linen. Only when the temperature is selected at 90°C the cycle is provided with a prewash phase before main washing phase. In this case it is recommended to add detergent both, in the prewash and main wash section.

COTTON for washing normally soiled cotton garments. At 40°C and 60°C, this is the standard cotton

water and energy consumption.

WOOL

All wool garments can be washed using programme ‚“Wool“ even those carryng the “hand-wash only “ label. For best results, use special detergents and do

not exceed max kg declaration of laundry.

DELICATES

for washing particularly delicate garments. Preferably turn garments inside out before washing.

SPORT

For washing lightly soiled sports clothing (tracksuits, shorts, etc.). For best results, we recommend not exceeding the maximum load indicated in the ‚‘‘PROGRAMME CHART‘‘. We recommend using liquid detergent , and adding the amount suitable for half-load.

WASH & DRY 45’ for washing and drying lightly soiled cotton

. This cycle washes and dries a laundry load of up to 1 Kg in just 45 minutes.

WASH & DRY 90’

garments quickly. This cycle washes and dries a laundry load of up to 2 Kg in just 90 minutes.

SPIN & DRAIN

spins the load then empties the water. For resilient garments.

COLOURS 15°

This cycle helps protect colours by washing in cold water (15°C) and uses less energy to heat the water

. Suitable for lightly soiled, ustained garments. wash results comparable to 40°c mixed at just 15°C

RINSE & SPIN

rinses and then spins. For resilient garments.

START DELAY

To set the selected programme to start at a later time, press the button to set the desired delay time. The

symbol lights on the display when this function is enabled. To cancel the delayed start, press the button again until the value “0” is shown on the display.

LOCK BUTTON

to lock the control panel, press and hold the button “Dry only” for approximately 3 seconds. the symbol

lights on the display to indicate

that the control panel is locked (with the exception of the button). This prevents

unintentional changes to programmes, especially with children near the machine. If any attempt is made to use the control panel, the symbol

. To unlock the control panel, press and hold the button “Dry only” for approximately 3 seconds.

OPTIONS AND FUNCTIONS

FRESHCARE+

If associated with wash cycles, this option increases their performances by generating steam to block proliferation of the main sources of unpleasant odours inside the appliance (exclusively for the wash). After the steam phase, the machine runs a delicate cycle with slow drum rotations. When the FRESHCARE+ option is associated with drying cycles, it prevents stubborn creases from stabilising on garments, thanks to slow drum rotations. The FRESHCARE+ cycle starts at the end of the wash or drying cycle and continues for maximum 6 hours; it can be interrupted at any time by pressing any button on the control panel, or by turning the knob. Wait roughly 5 minutes before opening the door.

OPTIONS selectable directly by pressing the relative button

! If the selected option is not compatible with

the programme set, an error warning tone

times. The option is not selected.

CLEANING AND MAINTENANCE

clean the control panel, as these could damage the

WARNING

disconnect it from its electrical power supply before performing any cleaning or maintenance operations.

dryer.

CLEANING THE WASHER DRYER EXTERNALLY

Clean the washer dryer's external parts using a soft damp cloth.

Do not use generic detergents, glass detergents, abrasive powders, or other similar products to

printed elements.

+ 36 hidden pages