w10330926b
®
cabr,o
®
TOP-LOADING
HIGH EFFICIENCY
LOW-WATER WASHER
USE AND CARE GUIDE
Table of Contents
WASHER SAFETY ......................................................... 2
WHAT'S NEW UNDER THE LiD? ................................. 3
CONTROL PANEL AND FEATURES ............................ 4
Dispensers.......................................................................5
CYCLE GUIDE ............................................................... 6
USING YOUR WASHER ................................................ 8
Using Laundry Product Dispensers...............................9
Starting Your Washer ......................................................9
WASHER MAINTENANCE ...............................................11
TROUBLESHOOTING ....................................................... 13
WARRANTY .........................................................................19
ASSISTANCE OR SERVICE .............................Back Cover
LAVEUSE HAUTE
EFFICACITI_ A FAIBLE
CONSOMMATION D'EAU
AVEC CHARGEMENT
PAR LE DESSUS
GUIDE D'UTILISATION
ET D'ENTRETIEN
Table des Matibres
S¢:CURITE DE LA LAVEUSE ...................................... 20
QUOI DE NEUF SOUS LE COUVERCLE? ................ 21
TABLEAU DE COMMANDE
ET CARACTERISTIQUES .......................................... 22
Distributeurs..................................................................23
GUIDE DES PROGRAMMES ...................................... 24
UTILISATION DE LA LAVEUSE .................................. 27
Utilisation des distributeurs de produits de lessive ..28
Mise en marche de la laveuse ..................................... 28
ENTRETIEN DE LA LAVEUSE .........................................30
DI_PANNAGE .......................................................................32
GARANTIE ...........................................................................39
ASSISTANCE OU SERVICE ................. Couverture arri_re
Para una version en espanol, visite www.whirlpool.com
W10330926B
W10298602B =SP
Designed to use only HE
High Efficiency detergents.
Con_ue pour I'utilisation
d'un d6tergent haute
efficacit6 seulement.
WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING." These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injuryto persons when using the washer, follow basic precautions,
including the following:
[] Read all instructions before using the washer.
[] Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.
[] Do not add gasoline, dry=cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
[]
Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
this time.
SAVE THESE INSTRUCTIONS
Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used
near children.
Before the washer is removed from service or discarded,
remove the door or lid.
[] Do not reach into the washer if the drum, tub or agitator is
moving.
[] Do not install or store the washer where itwill be exposed to
the weather.
[] Do not tamper with controls.
[] Do not repair or replace any part of the washer or attempt any
servicing unless specifically recommended in this manual or in
published user=repair instructions that you understand and
have the skills to carry out.
[] See "Electrical Requirements" located in the installation
instructions for grounding instructions.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
2
WHAT'S NEW UNDER THE LID?
Cleaning with Less _ter
! ]
Traditional agitator-style
washing machine
The most striking difference in your new washer is the
low-water impeller wash system. The washer automatically
adjusts the water level to the load size--no water level selector
is needed.
l
Impeller
Washer with low-water
impeller wash system
The impeller moves the load through the water while using
less water and energy compared to a traditional agitator-style
washer.
Choosiag the Right Detergent
Use only High Efficiency detergents. The package will be
marked "HE" or "High Efficiency." Low-water washing creates
excessive sudsing with a regular non-HE detergent. Using
regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer's instructions to determine the amount
of detergent to use.
When loading the washer with dirty laundry, fill it evenly
around the basket wall. Once you start the cycle, the lid
will lock, and the washer will begin the sensing process to
determine the correct water level for the load. This may take
several minutes.
Water is added to the load while the basket turns slowly. As the
washer dampens and moves the load, the level of clothes will
settle in the basket. This is normal, and does not indicate that
more clothes should be added.
IMPORTANT: You will not see a washer basket full of water
like with your past agitator-style washer.
Use only High Efficiency (HE) detergent.
H2Low _'_Concentrated Cleaning
The H2Low 'Mcleaning system means low-water concentrated
cleaning. Rather than diluting detergent as done in an
agitator-style washer, this washer delivers the detergent
directly to the soils.
Normal Sounds You Can Expect
At different stages of the wash cycle, you may hear sounds that
are different from those of your previous washer. For example,
you may hear a clicking at the beginning of the cycle, as the
lid lock goes through a self-test. There will be different kinds of
humming and whirring sounds as the impeller moves the load.
And sometimes, you may hear nothing at all, as the washer
determines the correct water level for your load or allows time
for clothes to soak.
3
CONTROL P EL FEATURES
Not all features and cycles are available on all models.
I
O POWER BUTTON
Press to turn the washer ON. Pressing once while the
washer is on will cancel the current cycle, pressing twice
will turn the washer OFR
WASH CYCLE KNOB
Turn the Wash Cycle knob to select a cycle for your laundry
load. See "Cycle Guide" for detailed descriptions of cycles.
TIME/STATUS DISPLAY
The Estimated Time Remaining display shows the time
required for the cycle to complete. Factors such as load size
and water pressure may affect the time shown in the display.
Overloading, unbalanced loads, or excessive suds may
cause the washer to adjust the cycle time, as well.
The Delay Wash indicator will light if you have set a delay
start to the cycle.
The Add a Garment indicator will let you know when it is still
possible to add items to the load.
When the cycle is complete, the Done indicator will light until
the lid is opened.
ECO MONITOR
0
Your washer is specially designed to conserve energy
and water. Each cycle, along with any selected options, will
result in different energy and water usage. To use the Eco
Monitor, choose the best cycle for the load being washed,
then adjust temperature and spin speed options to improve
the energy usage within that cycle.
START/PAUSE BUTTON
Press and hold 3 seconds to start the selected cycle; press
again to pause a cycle.
CYCLE SIGNAL BUTTON
Use this option to adjust volume of the signal that sounds at
end of cycle. A louder signal is helpful in removing items as
soon as cycle is complete.
LiD LOCK iNDiCATOR
@
This light indicates that the lid is locked and cannot be
opened. If you need to open the lid, press START/PAUSE.
The lid will unlock once the washer movement has stopped.
This may take several minutes if the load was spinning at
high speed. Press START/PAUSE again to restart the cycle.
DISPENSER SELECTOR
Press this button to set the dispensers for Oxi, Fabric
Softener, or both so that the selected laundry product
is added to the load at the correct time.
CYCLE SETTINGS AND OPTIONS
O
When you select a cycle, its default settings will light up.
SOIL LEVEL
Soil level (wash time) is preset for each wash cycle.
As you press the Soil Level pad, the cycle time (minutes)
will increase or decrease inthe Estimated Time Remaining
display and a different wash time will appear.
For most loads, use the soil level that is preset with the
cycle you have chosen. For heavily soiled and sturdy
fabrics, press Soil Level to select more wash time, if
needed. For lightly soiled and delicate fabrics, press
Soil Level to select less wash time, if needed. A lower
soil level setting will help reduce tangling and wrinkling.
SPIN SPEED
This washer automatically selects the spin speed
based on the cycle selected. The preset speeds can be
changed. Not all spin speeds are available with all cycles.
• Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
• Slower spin speeds mean less wrinkling, but will leave
your load more damp.
WASH/RINSE TEMP
Temperature Control senses and maintains uniform
water temperatures by regulating incoming hot and
cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following the
garment label instructions, use the warmest wash water
safe for your fabric.
• Warm and hot water will be cooler than what your
previous washer provided.
• Even for cold wash settings, some warm water may
be added to the washer to maintain a minimum
temperature. For cold water with no warm water
added, select tap cold.
4
You may also add or remove options for each cycle.
Not all options can be used with all cycles, and some
are preset to work with certain cycles.
DEEP CLEAN
This option provides enhanced cleaning action for tough
stains. It will add additional time to the cycle. Deep Clean
should be started on a dry load only and must be selected
before the washer has started to fill.
EXTRA RINSE
This option can be used to automatically add a second
rinse to most cycles.
ECOBOOST
The EcoBoost option allows you to increase your energy
savings on your wash cycles. When this option is used,
the wash cycle will use cooler wash water than the
selected cycle and may increase the spin speed for
faster drying.
High Efficiency "HE" detergent dispenser
Add liquid or powdered HE detergent product to this
dispenser for your main wash cycle.
@LED BASKET LIGHT {on some models)
A basket light illuminates the basket making loading and
unloading easier. The light comes on when the lid is opened,
and turns off automatically about 30 seconds after the lid is
closed. If the lid is left open, the basket light will turn off on
its own after a few minutes.
Use only High Efficiency (HE)detergent.
Liquid chlorine bleach / Timed Oxi dispenser
Liquid Chlorine Bleach: This dispenser holds up to
3/4 cup (180 mL) liquid chlorine bleach. The bleach will
be automatically diluted and dispensed at the optimum
time during the wash cycle. This dispenser cannot dilute
powdered bleach.
Oxi: This dispenser holds up to 3/4 cup (180 mL) ©xi
booster or other laundry booster, such as powdered
or liquid color-safe bleach. Laundry boosters are
automatically dispensed at the proper time during the
wash cycle. Be sure to select Timed Oxi from the options
to assure proper dispensing.
NOTE: Fill dispenser with only bleach OR oxi.
Do not mix products.
Liquid fabric softener dispenser
Pour measured liquid fabric softener into the liquid fabric
softener dispenser, if desired. It will dispense automatically
at the optimum time when the Fabric Softener option is
selected.
• Use only liquid fabric softener in this dispenser.
5
CYCLE GUIDE
Settings and options shown in bold are default settings for that cycle.
For best fabric care, choose the cycle that best fits the load being washed.
If using the Eco Monitor, adjust the temperature and spin speed within that cycle to improve energy usage.
Not all cycles and options are available on all models.
Items to wash: Cycle: Wash/Rinse Spin Soil Avadable Cycle Details:
Ii ¸ I , I I I : I ¸¸ ..............
Temperature: Speed: Level: Options: -
Lightly soiled
garments
Machine-wash
silks, hand-wash
fabrics and wool
Athletic and high-
performance wear
Normally soiled
sheets
Towels and
terrycloth items
No-iron fabrics
Cottons, linens,
and mixed garment
loads
Brightly or dark
colored casual
garments
Jeans, denims, and
similar fabrics
Quick
Wash
Handwash/
Delicate
Active Hot/Cold High
Wear Warm/Warm Medium
Sheets
Towels
Perm
Press/
Casual
Normal
Darks/
Colors
Jeans
Hot/Cold High Heavy Deep Clean
Warm/Warm Medium Normal Extra Rinse
Warm/Cold Low Medium Fabric Softener
Cold/Cold No Spin Light Oxi
Tap Cold/Cold
Warm/Cold Medium
Cold/Cold Low
Tap Cold/Cold No Spin
Warm/Cold Low
Cold/Cold No Spin
Tap Cold/Cold
Hot/Cold High Heavy
Warm/Warm Medium Normal
Warm/Cold Low Medium
Cold/Cold No Spin Light
Tap Cold/Cold
Hot/Cold High Heavy
Warm/Warm Medium Normal
Warm/Cold Low Medium
Cold/Cold No Spin Light
Tap Cold/Cold
Hot/Cold High Heavy
Warm/Warm Medium Normal
Warm/Cold Low Medium
Cold/Cold No Spin Light
Tap Cold/Cold
Hot/Cold High Heaw Deep Clean
Warm/Cold Medium Normal Extra Rinse
Cold/Cold No Spin Medium EcoBoost
Tap Cold/Cold Light Fabric Softener
Hot/Cold High Heavy Deep Clean
Warm/Warm Medium Normal Extra Rinse
Warm/Cold Low Medium EcoBoost
Cold/Cold No Spin Light Fabric Softener
Tap Cold/Cold Oxi
Hot/Cold High Heaw
Warm/Warm Medium Normal
Warm/Cold Low Medium
Cold/Cold No Spin Light
Tap Cold/Cold
Use this cycle to wash small loads of
2-3 lightly soiled garments that are
needed in a hurry. This cycle combines
a fast agitation, a shortened wash time,
and a high-speed spin to shorten
drying times.
Heavy Deep Clean Use this cycle for machine washable
Normal Extra Rinse delicate garments. This cycle uses
Medium Fabric Softener intermittent wash action with cool water
Light Oxi and slow spin to gently care for fine
Heavy
Normal
Medium
Light
Deep Clean
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Deep Clean
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Deep Clean
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Oxi
Deep Clean
Extra Rinse
EcoBoost
Fabric Softener
Oxi
washables and avoid shrinkage. Place
small items in mesh bags before washing.
Use this cycle to wash loads of
no-iron fabrics such as sport shirts and
other active wear.
Use this cycle to wash bed sheets. This
cycle uses extra water and a special
wash action to reduce wadding.
This cycle defaults to a warm wash
and medium spin speed. Hotter
temperatures help remove soils and
odors; faster spin speeds will reduce
drying times.
Use this cycle for lightly soiled office
wear. The cycle uses a warm wash,
a cooldown, and medium spin speeds
for better wrinkle performance.
Use this cycle to clean normally soiled
cottons, linens, and mixed fabric loads.
Default settings can be adjusted as
needed.
Cold water temperatures are used to
maintain dark dyes. Normal wash action
and medium wash time is preset. Set-
tings can be adjusted
as needed.
This cycle adds extra water in the
wash. If fading is a concern, a cooler
wash temperature and lower soil level
can be selected. For work jeans, select
a higher soil level setting and warmer
temperatures for improved cleaning.
6
CYCLE GUIDE
Settings and options shown in bold are default settings for that cycle.
For best fabric care, choose the cycle that best fits the load being washed.
If using the Eco Monitor, adjust the temperature and spin speed within that cycle to improve energy usage.
Not all cycles and options are available on all models.
Items to wash: Cycle: Wash/Ri
Large items such as
sleeping bags, small
comforters, jackets
Sturdy fabrics,
colorfast items
Heavily soiled
white fabrics
Heavily soiled,
colorfast fabrics
Swimsuits, items
that need rinsing
only.
Wet load of clothes
Heavily soiled
fabrics
No clothes in
washer
Bulky
Items
Heavy
Duty
Whites
Allergen ?
R _s4/Drain
& Spin
Deep Water
Soak
Clean
Washer
with
Affresh T"
Hot/Cold Medium Heavy
Warm/Warm Low Normal
Warm/Cold No Spin Medium
Cold/Cold Light
Tap Cold/Cold
Hot/Cold High Heavy
Warm/Warm Medium Normal
Warm/Cold Low Medium
Cold/Cold No Spin Light
Tap Cold/Cold
Hot/Cold
Warm/Warm
Warm/Cold
Cold/Cold
Tap Cold/Cold
Hot/Cold
Warm/Warm
Warm/Cold
Cold/Cold
Tap Cold/Cold
Warm/Cold
Cold/Cold
Tap Cold/Cold
High Heavy
Medium Normal
Low Medium
No Spin Light
High Heavy
Medium Normal
Low IMedium
No Spin Light
High
Medium
Low
No Spin
High
Medium
Low
No Spin Heavy
Normal
Medium
Light
Ava,ab e
Options:
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Deep Clean
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Deep Clean
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Deep Clean
Extra Rinse
EcoBoost
Fabric Softener
Oxi
Extra Rinse
EcoBoost
Fabric Softener
EcoBoost
EcoBoost
This cycle is designed for oversized
items that do not easily absorb water,
such as comforters, pillows, and poly-
filled jackets. The cycle uses an initial
soak to thoroughly saturate the item(s).
Use this cycle for heavily soiled or sturdy
cotton items. This cycle combines high-
speed wash action, longer wash time, and
extra high-speed spin to shorten drying
times. Adjust temperature settings
as needed.
This cycle adds liquid chlorine bleach to
the load at the proper time for improved
whitening of soiled white fabrics.
Uses more water to flush out allergens
such as dust mites and pet dander from
normally-soiled items. This cycle removes
more than 95% of allergens.
This cycle uses a high-speed spin.
For some fabrics, you may wish to set
the spin speed to a lower setting.
To select, choose Rinse/Drain & Spin
and turn off Extra Rinse. Use this cycle
to spin excess water out of a load. This
cycle drains the water and spins at a
high speed. Spin speed is adjustable.
Adjustable soak time to loosen heavy
soils. At the end of the cycle, the washer
will drain but not spin, and a tone will
sound. Select desired wash cycle and
add additional detergent to continue
wash process.
Use once a month to keep the inside
of the washer fresh and clean. Higher
water levels and Affresh work together
to thoroughly clean the washer interior.
_rModel WTW7800X*0/1 only:
Sanitization Performance of Residential and
(_ i NSF Protocol P172
Commercial, Family-Sized Clothes Washers
7
USING YOUR WASHER
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
1, Sort and prepare your laundry
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2, Load laundry into washer
• Empty pockets. Loose change, buttons, or any small object
can pass under the impeller and become trapped, causing
unexpected sounds.
• Sort items by recommended cycle, water temperature,
and colorfastness.
• Separate heavily soiled items from lightly soiled.
• Separate delicate items from sturdy fabrics.
• Do not dry garments if stains remain after washing; heat can
set stains into fabric.
• Treat stains promptly.
• Close zippers, fasten hooks, tie strings and sashes.
Remove non-washable trim and ornaments.
• Mend rips and tears to avoid further damage to items
during washing.
Helpful Tips:
• When washing water-proof or water-resistant items, load
evenly. See "Cycle Guide" for tips and more information on
using the Bulky Items cycle.
• Use mesh bags to help avoid tangling when washing delicate
or small items.
• Turn knits inside out to avoid pilling. Separate lint-takers from
lint-givers. Synthetics, knits, and corduroy fabrics will pick up
lint from towels, rugs, and chenille fabrics.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
freely for best cleaning and to reduce
wrinkling and tangling.
8
Usiag Lauadry Product Dispeasers
Add HE detergent to dispenser
dispenser
IOxi
O[Fabric
|Softener
Add a measured amount of HE
detergent into detergent dispenser.
IMPORTANT: Use only High Efficiency detergents. The package
will be marked "HE" or "High Efficiency." Low-water washing
creates excessive sudsing with a regular non-HE detergent.
Using regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer's instructions to determine the amount
of detergent to use.
HELPFUL TIP: See "Washer Maintenance" for information on
recommended method of cleaning washer dispensers.
product to dispenser
Pour a measured amount of liquid Dispensers
fabric softener into dispenser; always
follow manufacturer's directions for correct amount of
fabric softener based on your load size. Then select
Fabric Softener option.
IMPORTANT: Fabric Softener option must be selected
to ensure proper distribution at correct time in cycle.
Do not overfill or dilute. Overfilling dispenser will cause
fabric softener to immediately dispense into washer.
If Extra Rinse option is selected, fabric softener will be
dispensed in the last rinse.
NOTE: Do not use liquid fabric softener dispenser balls
in this washer. They will not dispense correctly.
Startiag Your Washer
6, Press POWER to turn on washer
POWER
Add liquid chlorine bleach or Oxi
laundry boost product to the dispenser.
When using Oxi products or other
laundry boosters (liquid or powdered
color-safe bleach), select the Oxi option, press the Dispensers
button until Oxi is selected. It is not necessary to select the Oxi
option when using liquid chlorine bleach.
• Do not overfill, dilute, or use more than 3/4 cup (180 mL)
of liquid chlorine bleach. Overfilling will cause the bleach
or Oxi product to dispense immediately into the washer.
• Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
o[Oxi
[Fabric
|Softener
Dispensers
9
7. Select cycle
8. Select cycle settings
d_rks
COLORS
JEANS
BULKY ITEMS
HEAVY DUTY
/VHITES
,LLERGEN
CLEAN
WASHER
withaffresh
Est.Time Remaining
TOWELS
SHEETS
ACTIVEWEAR
h_nd_,asf
DELICATI
QUICKWASI-
pern pr_'_
RINSE/
DRAIN DEEP
&SPIN WATER
NORMAL
SOAK
Turn cycle knob to choose your wash
cycle. Estimated Time Remaining
will light up with a cycle time. You may
notice time adjusting during the cycle.
This is normal.
If you do not want to begin a cycle
immediately, you may choose DELAY
WASH option.
To choose a delay time:
1. Press DELAY WASH button
to select desired delay time.
2. Press START/PAUSE.
To cancel delaying a cycle:
1. Press START/PAUSE again to begin a wash cycle
immediately.
IMPORTANT: When delaying a cycle, use liquid HE detergent
only in the dispenser. Powdered detergents may absorb
moisture from a previous cycle and clump before the wash
cycle begins.
IHot/Cold
Heavy JHigh
Normal [Medium
Medium [,ow
Light INo Spin
Warm/Warm
Warm/Cold
Cold/Cold
Tap Cold/Cold
%
Soil Spin Wash/Rinse
Level Speed Temp
Once you select a cycle, the default settings for that cycle will
be lit. Press the cycle settings buttons to change the Soil Level,
Spin Speed, and Wash/Rinse Temperature, if desired. Not all
settings are available with all cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
Wash Temp Suggested Fabrics
Hot
Some cold water is added to save Whites and pastels
energy. This will be cooler than Durable garments
your hot water heater setting. Heavy soils
Warm
Some cold water will be added, so Bright colors
this may be cooler than what your Moderate to light
previous washer provided, soils
Cold
Warm water may be added to Dark colors that
assist in soil removal and to help bleed or fade
dissolve detergents. Light soils
10
Tap Cold
This is the temperature from your
faucet.
Cold water
temperatures are used
to maintain colors and
prevent dyes from
transferring.
9. Select cycle options
lOxi
Extra |Softener
Rinse
|Fabric
Cycle
Signal
Loud
Soft
Off
WASHER r INTENANCE
r
WATER INLET HOSES
Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Periodically inspect and replace inlet hoses
if bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses, mark the date of
replacement on the label with a permanent marker.
Lid Lock
Deep Dispensers
Clean
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Deep Clean or Extra Rinse. These may be
turned off, if desired.
NOTE: Not all options are available with all cycles.
1 0. Press START/PAUSE to begin
wash cycle
START
Pause
Press the START/PAUSE button to start the wash cycle.
When the cycle has finished, the DONE indicator will light and the
end of cycle signal will sound (if set).
Promptly remove garments when cycle is done to avoid odor,
reduce wrinkling, and rusting of metal hooks, zippers, and snaps.
NOTE:
If you need to open the lid to add 1 or 2 missed garments, you
may do so while the Add a Garment indicator is lit.
Press START/PAUSE; the lid will unlock once the washer
movement has stopped. This may take several minutes if the
load was spinning at high speed. Then close lid and press
START/PAUSE again to resume the cycle.
If lid is left open for more than 10 minutes the water will
pump out.
f CLEANING YOUR WASHER
Keep your washer as clean and fresh as your clothes.
To keep washer interior odor-free, follow this
recommended monthly cleaning procedure:
1. Make sure the washer is empty.
2. Using recommended AFFRESH ®washer cleaner,
add one tablet to washer drum.
OR
If using liquid chlorine bleach, add 1 cup (250 mL) to
liquid chlorine bleach dispenser.
IMPORTANT: Do not add detergent to CLEAN
WASHER with AFFRESH TMcycle. Do not use more than
recommended amount of bleach to avoid damaging
product over time.
3. Close washer lid.
4. Press POWER.
5. Select CLEAN WASHER with AFFRESH 'Mcycle.
6. Press START/PAUSE. Water will pour into washer
for a moment and pause, lid will lock, then cycle
will continue.
NOTE: For best results, do not interrupt cycle. If cycle
must be interrupted, press START/PAUSE twice and run a
RINSE AND SPIN cycle to ensure cleaner or bleach have
been rinsed from washer.
To clean exterior:
1. Use a soft, damp cloth or sponge to wipe up any spills.
2. Use all-purpose surface cleaner, if needed.
IMPORTANT: To avoid damaging the washer's finish,
do not use abrasive products.
11
r
CLEANING YOUR DISPENSERS
TRANSPORTING YOUR WASHER
You may find laundry product residue leftover in your
dispensers. To remove residue, wipe with a damp cloth and
towel dry.
r
NON=USE AND VACATION CARE
Operate your washer only when you are home.
If moving, or not using your washer for a period of time,
follow these steps:
1. Unplug or disconnect power to washer.
2. Turn off water supply to washer, to avoid flooding due
to water pressure surge.
WINTER STORAGE CARE
iMPORTANT: To avoid damage, install and store washer
where it will not freeze. Because some water may stay in
hoses, freezing can damage washer. If storing or moving
during freezing weather, winterize your washer.
To winterize washer:
1. Shut off both water faucets, disconnect and drain water
inlet hoses.
2. Put 1 qt. (1 L)of R.V.-type antifreeze in basket and run
washer on RINSE AND SPIN cycle for about 30 seconds
to mix antifreeze and remaining water.
3. Unplug washer or disconnect power.
1. Shut off both water faucets. Disconnect and drain water
inlet hoses.
2. If washer will be moved during freezing weather, follow
WINTER STORAGE CARE directions before moving.
3. Disconnect drain from drain system.
4. Unplug power cord.
5. Place inlet hoses inside washer basket.
6. Drape power cord and drain hose over the console
and secure with masking tape.
7. Place foam packing ring from original shipping materials
back inside washer. If you do not have packing ring,
place heaw blankets or towels into basket opening.
Close lid and place tape over lid and down front of
washer. Keep lid taped until washer is placed in
new location.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
DO not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
REINSTALLING/USING WASHER AGAIN
To reinstall washer after non-use, vacation, winter storage
or moving:
1. Refer to Installation Instructions to locate, level, and
connect washer.
2. Before using again, run washer through the following
recommended procedure:
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet
hoses. Turn on both water faucets.
2. Plug in washer or reconnect power.
3. Run washer through BULKY iTEMS cycle to clean
washer and remove antifreeze, if used. Use only HE
High Efficiency detergent. Use half the manufacturer's
recommended amount for a medium-size load.
12
Loading...