WHIRLPOOL UW8 F1C WB IL Daily Reference Guide
Quick guide
EN
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please
register your product on www . whirlpool . eu/ register
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting the
appliance to the power supply.
Connect the appliance to the power supply and turn the thermostat
knob to switch on the appliance.
CONTROL PANEL
8. 9.
ON/STANDBY BUTTON
To put the product in Stand-by, press and hold for 3seconds. All
the icons turn o except On/Standby indicator
appliance press once (briey) this button.
FAST FREEZE BUTTON
To activate/deactivate the Fast Freeze function simply press Fast Freeze
button (see the Instructions for Use).
The Fast Freeze function switches o automatically after 50hours.
STOP ALARM BUTTON
Press in case of alarm (see the below Alarm Table).
BLACK OUT ALARM
Long Black-out Alarm indicator (see the Instructions for Use).
TEMPERATURE SETTING BUTTON
The appliance is normally factory-set for operation at the
recommended temperature of -18°C. The internal temperature can be
adjusted between -16°C and -24°C, proceeding as follows:
• Press to change the set point (°C). The storage temperature can
be changed by -1°C with each pressure of the button: the value
changes cyclically between -16°C and -24°C.
1. 3.
2.
6.
. To reactivate the
4.5.7.
Before using the appliance carefully read the Safety
Instruction.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti-odour lter in the fan as
demonstrated in the lter packaging (if available).
1. On/Standby button
2. Temperature display
3. Fast Freeze button
4. Stop Alarm button
5. Black Out alarm
6. Temperature Setting button
7. Eco Night Function
8. 6th Sense Freeze Control indicator
9. Freeze Control indicator
ECO NIGHT FUNCTION
Press to activate/deactivate the Eco Night function. The Eco Night
function enables appliance energy consumption to be concentrated in
the reduced rate hours, generally at night (see the Instructions for Use).
Freeze Control
Freeze Control is an advanced technology that reduces temperature
uctuations in the whole freezer compartment to minimum.
To activate/deactivate the Freeze Control function press for 3seconds
the FREEZE CONTROL button.
If the function is engaged and the user modify the freezer temperature
out of the working range, the function is automatically switched o.
In case of Fast freezing is engaged, the function “Freeze control”
is inhibited until the Fast Freezing function switched o (see the
Instructions for Use).
6TH SENSE FREEZE CONTROL INDICATOR
6th Sense Freeze Control is an advanced technology that reduces
freeze burns and food preserves its original quality and color.
HOW TO STORE FOOD AND BEVERAGE
Legend
TROUBLESHOOTING
What to do if... Possible reasons Solutions
FREEZER ZONE
All food items
The appliance doesn’t work. There may be an appliance power
The inside light does not
work.
The internal temperature
of the compartments is not
cold enough.
There is water on the
bottom of the refrigerator
compartment.
Excessive amount of frost in
the freezer compartment.
The front edge of the
appliance that the door
gaskets seal against is hot.
The temperature of the
refrigerator compartment is
too cold.
supply problem.
It may be necessary to replace the light
bulb.
The reasons could vary (see “Solution”)
column.
The defrost water drain is blocked. Clean the defrosting water drain (see section “Cleaning and
The door to the freezer compartment is
not closed properly.
This is not a problem. It prevents
condensation from forming.
• The set temperature is too cold.
• A large amount of fresh food may
have been placed in the freezer
compartment.
Make sure:
• there is not a power failure;
• the plug is properly inserted in the power socket and the doublepole switch (if present) is in the correct position (on);
• the household electrical system protection devices function;
• the power cable is not broken.
Disconnect the appliance from the power supply and contact the
Technical Assistance Service if you need a replacement.
Check that:
• the doors are closed properly;
• the appliance is not installed near a heat source;
• the temperature is appropriately set;
• the circulation of air through the ventilation grilles on the base of
the appliance is not obstructed.
Maintenance").
• Check that there is nothing preventing the door from closing
properly.
• Defrost the freezer compartment.
• Make sure the appliance has been correctly installed.
A solution is not needed.
• Try to set a less cold temperature.
• If fresh food has been put in the freezer compartment, wait until
the freezing has been completed.
• Turn o the fan (if present) described in the paragraph “FAN”.
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
• Visiting our website docs . whirlpool . eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product's identication
plate.
19515502100
Loading...