Whirlpool AWO 977, NEVADA 1400, NEVADA 1600, AWO 957 INSTRUCTION FOR USE
30106373GB.fm Page 1 Wednesday, April 14, 2010 6:29 PM
GB PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Programme
White Cotton Kookwas
Coloured Cotton Bonte was
70 - 95 °C
20 - 60 °C
Tempe-
rature
Care
Labels
C
D
Max.
Load
kg
- Respect the manufacturer’s recommendations on the care label
7.0
Normally to heavily soiled bed linen, table linen and underwear,
towels, shirts etc. made of cotton and linen.
7.0
Type of wash/Notes
H
}
E
F
E. Programme selector
F. “Start (Pause)” button
A
B
I
J L
K
Detergents and additives Special options
Pre-
Main
wash
wash
Yes
❉
G
Softener Pre-
❉❉❉❉❉ ❉❉❉
G. “Spin” button
H. Programme sequence indicator
I. “Reset” button
J. “Start delay” button
K. “Temperature” button
L. Display
wash
Voorwas
Start
delay
Start
selectie
uren
Easy
ironing
Gemakkelijk
strijken
Intensive
rinse
Intensief
spoelen
Rinse
hold
Spoel-
stop
Spin
Centr.
Max.
Spin
Speed
rpm
max.
Synthetics Synthetisch
Daily load Gemengde was
Quick wash
Delicates Fijne was
Sport Sport
Lingerie Lingerie
Wool Wol
Handwash
Eco Cotton Eco Katoen
Rinse & Spin Spoelen & Centrifugeren
Spin Centrifugeren
Drain Afpompen
optional / Yes : dosing required
❉
:
1)
For improved garment care, spin speed is restricted in these programmes.
20 - 60 °C
20 - 60 °C
20 - 30 °C
20 - 40 °C
20 - 30 °C
20 - 30 °C
20 - 40 °C
20 - 40 °C
60 °C
——
——
———
Normally soiled blouses, shirts, overalls etc. made of polyester
3.0
(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
4.0 Slightly to normally soiled textiles made of cotton and/or synthetics.
Shortly worn outer clothing made of cotton, polyester, polyamide and
4.0
blends with cotton.
1.5 Curtains and delicate clothing, dresses skirts, shirts and blouses.
Normally soiled and sweaty sportswear made of cotton jersey or
microfibres.
3.0
This programme includes a prewash cycle – you can add detergent also to
the prewash chamber if you want. Do not add any softener.
This programme is particularly suitable to treat delicate lingerie (use
1.0
of a laundry net strongly recommended).
Only woollens, labelled with the Woolmark and identified as machine washable.
1.0
This programme (40°C) is tested and approved by The Woolmark
Company for machine washable wool.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
1.0
This programme (40°C) is tested and approved by The Woolmark
Company for handwashable wool.
Heavily soiled and robust laundry washable at 60°C such as bed linen,
table linen, towels etc.
7.0
The extended programme duration enables economic energy and
water consumption while maintaining good washing results.
7.0
Same as the last rinse and the final spin in the “Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the
7.0
“Cotton” programme.
Drain only - no spinning. Alternative method of terminating programme
after “Rinse Hold”.
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the
washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed
according to the instructions on the garment label and those issued in this programme chart. M0620
Yes
❉
—
—
❉
❉
—
—
—
—
——
❉❉❉❉❉ ❉❉❉
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
❉
❉
❉
❉
❉
❉
❉
❉
❉
——
——
—
❉❉
——
——
——
——
——
——
——— — —
——— — —
max.
❉❉❉❉❉
——
❉
——
❉❉
❉❉
❉❉❉❉❉
——
❉
——
❉
——
❉
—
❉
—
❉
———
❉
—————
❉
Whirlpool is a registered trademark of Whirlpool USA
❉❉
❉❉
❉❉
❉❉❉
❉❉❉
max.
max.
1000
max.
400
1000
400
max.
max.
max.
❉
5019 301 06373
1)
1)
1)
1)
Black process 45.0° 150.0 LPI
30106373GB.fm Page 2 Wednesday, April 14, 2010 6:29 PM
CONSUMPTION DATA
Programme
White Cotton 95 7.0 74
Coloured Cotton 60 7.0 54
Coloured Cotton 40 7.0 69 0.75 2:05
Synthetics 60 3.0 46
Synthetics 40 3.0 42 0.40 1:20
Daily load 40 4.0 48 0.50 1:00
Quick wash 30 4.0 48 0.25 0:30
Delicates 30 1.5 60 0.50 0:45
Sport 30 3.0 52 0.50 1:34
Lingerie 30 1.0 45 0.45 0:36
Wool 40 1.0 60 0.55 0:45
Handwash 40 1.0 45 0.55 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
**
***
Eco Cotton
The time indicated on the display can deviate from the values in the table, because it takes into account the household
conditions applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
Reference Programme for Energy Label.
***
Tem per at ure
(°C)
60 7.0 54 0.91 4:00
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as described in
the chapter “Detergent and Additives” in your Instructions for Use.
1. Turn the
2. The
3. The indication lamp of the predefined
programme selector
The display shows the programme duration in hours and
minutes as well as the predefined temperature. The
button blinks.
(Pause)”
temperature
“Temperature” button.
case you want to set another spin speed, press the “Spin” button.
can be altered by pressing the
to the desired programme.
spin speed
lights up; in
SELECT ANY DESIRED OPTION
Push the button of any option desired - the respective indication lights up.
When the combination of programme and additional option(s) is
not possible, the indication lights switch off automatically.
Unsuitable combinations of options are deselected automatically.
“Clean+” button
• Choose this option if you use an in-wash additive for stain removal
(powder , fo r example “Vanish”) - it will optimize the additive’s
efficiency to get better wash performance and stain removal.
• Choose temperature of 30 or 40°C and use with maximum load.
• Add an appropriate amount of in-wash additive for stain
removal (powder) to the main wash chamber, together with
your detergent (only use powder detergent with this option).
Respect the manufacturer’s dosing instructions.
• Prolongs the programme by approx. 10 to 15 minutes.
• Appropriate for use of stain removers and bleaches on oxygen
basis.
Chlorine or perborate bleaches must not be used!
“Start
Load
Water
(kg)
“Prewash” button
• Only for heavily soiled loads (for example sand, granular dirt)
• Do not use liquid detergent for the main wash when activating
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics” and “Daily
• Increases the water quantity and the clothes are spun very gently.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft
“Rinse hold” button
• The laundry remains in the last rinse water without
• This option is particularly recommended for the programmes
• It is particularly useful if you want to postpone spinning to a
• If you select “Rinse hold”, do not leave the laundry to soak for
Terminate the “Rinse hold” option:
• Press the
Energy
(l)
(kWh)
2.10 2:10
**
1.19 2:20
0.80 1:35
**
sensible. Increases the cycle time by approximately 15 min.
the Prewash option.
load” programmes to make ironing easier .
water, washing baby linen and helps people with allergies.
progressing to the final spin cycle to avoid creasing and prevent
colours from changing.
“Synthetics”, “Daily load” and “Delicates”.
later time, or if you want to drain only.
too long.
The programme stops to “Rinse hold” at the time the
Note:
“Rinse hold” light in the programme sequence indicator is on.
The indication lamp next to the
“Start (Pause)”
terminate automatically with the final spin cycle for the present
wash programme.
Approx. Programme Duration
(hours : minutes)
“Start (Pause)”
button; the programme will
*
button blinks.
• If you do not wish to spin the clothes, turn the programme
selector knob to the “Drain” programme and press the
button.
(Pause)”
“Spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is se lected, the final spinning is cancelled but
intermediate spin peaks remain during rinse. The water is
drained out only.
“Start
START DELAY
The “Start delay” allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper. Do
not use liquid detergent when activating the “Start delay”.
• Select programme, temperature and options.
• Press the “Start delay” button to select the delay time by 1 to 23 hours.
•Press the
• The time delay indication disappears when the programme
• Once having pressed the
To cancel the “Start delay”
...before you press the “Start (Pause)” button:
• Turn the programme selector to another position or press the
...after having pressed the “Start (Pause)” button:
•Press the
“Start (Pause)”
The indication light next to the “Start delay” button lights up
and the countdown of the delay time begins. The dot between
hours and minutes of the indicated delay time as well as the
light of the start delay button will keep blinking until the
programme starts.
starts and it is replaced by the remaining programme time.
of hours preselected can be reduced by pressing and holding
the “Start delay” button. From 1 hour on, the delay time can
also be reduced by minutes.
button.
“Reset”
“Start (Pause)”
disappear from the display. Press
start the selected programme immediately.
button.
“Start (Pause)”
button - the start delay will
button, the number
“Start (Pause)”
again to
PROGR AMME START
Open the tap and press the
indication lamp next to the
programme sequence indicator shows the current programme
phase, running from left to right through Wash, Rinse, Spin/Drain.
The display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the remaining
time is newly calculated in certain programme phases. If this is the
case,
an animation appears on the display
“Start (Pause)”
“Start (Pause)”
button. The
button lights up. The
.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to
show that the door can be opened. As long as a wash programme
is running, the door remains locked and must on no account be
forced open. In case you have an urgent need to open it during a
running programme, refer to “Cancel (Reset) a running
programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a fault in an
electrical component. Refer to the “Troubleshooting Guide” in
your Instructions for Use; if the fault persists, contact our After
Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open the water
tap; if the indication still lights up, refer to the “Troubleshooting
Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain hose is
kinked or the filter must be cleaned; in the latter case refer to the
Instructions for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator are off,
and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
2. Select the new programme, temperature, any options and
3. Press the
“Start (Pause)”
The light blinks.
another spin speed if you want.
“Start (Pause)”
programme continues at the same position where the
previous programme was interrupted. Do not add detergent
for this programme.
button to pause the programme.
button again. The new
RESET A RUNNING PROGRAMME BEFORE
THE END
The
•Press the
button cancels a programme before the end.
“Reset”
button for at least 3 seconds. Any existing
“Reset”
water is drained out before the door can be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06373
Black process 45.0° 150.0 LPI
Loading...