Whirlpool HOO M40 S, HOO M10 S INSTRUCTION FOR USE

Betriebs- und Wartungshandbuch
D
Enthält auch Anweisungen und Vorschriften für die sichere Installation Lesen Sie die vorliegenden Anweisungen und das beiliegende Installationshandbuch vor der
Installation oder dem Gebrauch der Abzugshaube aufmerksam durch und befolgen Sie sie.
User and Maintenance Handbook
GB
Also contains instructions and regulations for safe installation Before installing or using the hood, carefully read and follow the instructions given in this handbook and in the enclosed installation handbook.
Manuel d’utilisation et d’entretien
F
Contient également les instructions et prescriptions pour une installation sûre Avant de monter ou d’utiliser la hotte, lire et suivre attentivement les instructions
reportées dans ce manuel et dans le manuel d’instructions en annexe.
Libretto di Uso e Manutenzione
I
Contiene anche istruzioni e prescrizioni per una sicura installazione Prima di installare o utilizzare la cappa, leggete e seguite attentamente le istruzioni
riportate in questo libretto e nel libretto di installazione allegato.
5019 618 33116/A
Electrical connection
The mains voltage must match that given on the rating plate located inside the hood. If provided with a plug, connect the hood to a socket complying with the current regulations and located in an accessible area. If it does not have a plug (direct connection to the power supply) or if the plug is not in an accessible place, fit a suitable double-pole switch that ensures complete disconnection from the power supply in category III overvoltage conditions, complying with the installation rules.
WARNING: Before reconnecting the hood circuit to the
power supply and checking correct operation, always make sure the power cable is correctly fitted and that it was NOT crushed in its housing during installation. Make sure to have this operation carried out by a specialised technician.
Cleaning the hood
WARNING: Failure to remove oil/grease (at least once a
month) could result in fire. Use a soft cloth with a neutral detergent. Never use abrasive substances or alcohol.
Before using the hood
Please read these instructions carefully and keep them for future reference, in order to ensure best use of your hood. The packing materials (plastic bags, polystyrene, etc.) are a potential source of danger and must be kept out of the reach of children. Make sure the hood has not been damaged during transport.
Declaration of conformity
This product has been designed, manufactured and put on the market in conformity with:
- safety objectives of the “Low Voltage” Directive 2006/95/EC (which replaces 73/23/EEC as amended)
- protection requirements of “EMC” Directive 89/336/EEC amended by Directive 93/68/EEC.
Troubleshooting guide
If the hood does not work:
• Is the plug properly inserted in the power socket?
• Is there a power failure?
If the hood is not extracting enough:
• Is the right speed selected?
• Do the filters need cleaning or replacing?
• Are the air outlets blocked?
If the lamp does not work:
• Does the lamp need replacing?
• Is the lamp correctly fitted?
AFTER-SALES SERVICE
Before calling the After-Sales Service
1. Check to see if you can fix the problem yourself (see “Troubleshooting Guide”).
2. Switch the appliance off and then on again to check if the problem has been eliminated.
3. If the problem persists, contact the After-Sales Service.
Specify:
• the type of fault,
• the product model given on the dataplate inside the hood, visible on removing the grease filters,
• your full address,
• your telephone number and area code,
• the Service code (the number under the word SERVICE on the dataplate inside the hood, behind the grease filter).
If any repairs are necessary, contact an authorised Service Centre (to ensure the use of original spare parts and correct repair). Failure to comply with these instructions can compromise the safety and quality of the product.
5019 618 33116/A
GB
ID F
Loading...
+ 2 hidden pages