Whirlpool FL 1456 INSTRUCTION FOR USE

60105044GB.fm Page 1 Wednesday, April 2, 2008 4:34 PM
GB PROGRAMME CHART
A. “Door open” indication This washing machine is equipped with
automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:
B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication
Programme
Cotton
60 - 95 °C
Cotton
40 °C
SuperEco
60 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
Coton
60 - 95 °C
Coton
40 °C
60 °C
Synthétiques
30 - 40 - 60 °C
Délicat
30 - 40 °C
Labels
Max
Load
- For temperature selection, respect the manufacturer’s recommendations
kg
on the care label
Normally to heavily soiled bed linen, table linen and underwear, towels,
6.0
shirts etc. made of cotton and linen.
With heavily soiled laundry the additional “Prewash” option can be
5.0
additionally selected.
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and/or linen.
Offers highest economy in energy consumption by prolonged wash duration.
6.0
Ideal to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start Delay” accordingly.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
2.5
With heavily soiled laundry the additional “Prewash” option can be additionally selected.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5
With heavily soiled laundry the additional “Prewash” option can be additionally selected.
Type of wash/Notes
C
D
G
E. Programme selector
H
{
F. “Start” button
A
G. Spin speed selector
I
H. Programme sequence indicator
B
I. “Reset” button
E
Detergents and additives Special options Pre-
Main
wash
Wash
Yes
Yes
Yes
Yes
F
Softener Eco
❉❉❉❉ ❉❉❉
❉❉❉❉ ❉❉❉
Pre-
Easy
wash
Pré-
lavage
ironing
Anti
froissage
Eco
—— —
——
Intensive
Rinçage intensif
rinse
Rinse
hold
Arrêt cuve
pleine
Variable
spin
Essorage
variable
❉❉❉
❉❉
Max Spin
Speed
rpm
max
max
1000
1000
1)
1)
Daily load
40 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
30 - 40 °C
Rinse & Spin Rinçage & Essorage
Spin Essorage
Drain Vidange
: = optional / Yes = dosing required.
1)
For improved garment care, spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care, spin speed is restricted to 400 rpm in this programme.
Black process 45.0° 100.0 LPI
40 °C
Rapide 30min.
Laine
Froid - 40 °C
Lavage main
30 - 40 °C
— —
3.0 Slightly to normally soiled textiles made of cotton and/or synthetics.
3.0
1.0
1.0
6.0
6.0 —
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.
Only woollens, labelled with the Woolmark and identified as machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this programme.
Same as the last rinse and the final spin in the “Cotton” programme. In this programme spinning is intensive. Same as the spin cycle in the
“Cotton” programme. Drain only - no spinning. Alternative method of terminating programme after
“Rinse Hold”.
Yes
Yes
Yes
Yes
— ——
——
——
—— —
—— —
—— —
❉❉❉❉
❉❉ ❉❉
❉❉
❉❉❉
—— ———— ——
max
max
1)
1000
2)
400
max max
—— ———— ——— —
5019 601 05044
60105044GB.fm Page 2 Wednesday, April 2, 2008 4:34 PM
CONSUMPTION DATA
Programme
Cotton 95 6.0 59
Cotton with Eco
Cotton 60 6.0 49 1.14 2:10 Cotton 40 5.0 56 0.70 2:00
SuperEco 60 6.0 51 0.72 4:00 Synthetics 60 2.5 50 Synthetics 40 2.5 46 0.50 1:20
Delicates 30 1.5 60 0.50 0:45 Daily load 40 3.0 41 0.50 1:00
Quick wash 30 3.0 41 0.40 0:30
Wool 40 1.0 60 0.50 0:45
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
* **
***
Handwash 40 1.0 45 0.50 0:40
The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions applicable at that time. To reduce the water temperature, some cold water is adde d at the e nd of the main wash cycle, bef ore the pump drains the water out. Reference Programme for Energy Label.
***
Temperature
(°C)
60 6.0 49 1.02 2:20
ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.
1. Turn the programme and temperature.
2. The programme (in hours and minutes), and the indication lamp next to the
3. The indication lamp of the predefined lights up.
programme selector
time display
shows the duration of the chosen
“Start”
to the desired
button flashes.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the respective indication lights up.
When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.
Load
(kg)
spin speed
Water
Energy
(l)
(kWh)
**
**
1.90 2:00
0.80 1:35
“Prewash” button
• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier.
• Increases the water quantity and the clothes are spun very gently.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft water , washing baby linen and helping people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.
• This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.
• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.
The programme stops to “Rinse hold” at the
Note:
time the “Anticrease” light in the programme sequence indication is on. The indication lamp next to the
button flashes.
“Start”
Approx. Programme Duration
(hours : minutes)
*
Terminate the “Rinse hold” option:
• Press the terminate automatically with the final spin cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the
“Variable spin” button
• Every programme has a predefined spin speed.
• P ress the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.
button; the programme will
“Start”
button.
“Start”
PROGR AMME START
Open the tap and press the indication lamp next to the programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.
The time display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the time display.
button. The
“Start”
button lights up. The
“Start”
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).
PROGRAMME END
All the lights of the programme sequence in dicator are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START
1. Press the The light flashes.
2. Select the new programme and, if you want, another spin speed and any options.
3. Press the continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.
button to pause the programme.
“Start”
button again. The new programme
“Start”
CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END
The
Press the
button cancels a programme before the end.
“Reset”
button for at least 3 seconds. Any
“Reset”
existing water is drained out before the door can be opened.
5019 601 05044
Black process 45.0° 100.0 LPI
Loading...