FL 1448GB
This washing machine is equipped with
automatic safety functions
faults at an early stage and react appropriately,
e.g.:
A. “Pump” indicator
B. “Water tap” indicator
Check your washing machine’s water supply.
which detect
A
C
B
F
{
C.“Door Locked” indicator
As long as a washing programme is running, the
lamp lights up to show that the door cannot be
opened.
D.“Start” button
E. “Start Delay” button
F. Programme sequence indicator
I
Programme
Cotton
Coton
Synthetic
Synthétique
Daily Mixed
Quotidien
Rapid wash
Rapide
Delicate
Délicat
Wool
Laine
Silk
Soie
Drain
Vidange
Gentle spin
Essorage court
Intensive Spin
Essorage
Rinse + Spin
Rinçage + Essorage
1)
For improved garment care spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care spin speed is zero in this programme.
1-4
5-7
8-
9
10-11
12-14
15
A
B
C
D
Care
Labels
Normally to heavily soiled bed linen, table
linen and underwear, towels, shirts etc.
made of cotton and linen.
Normally soiled blouses, shirts and other
outer clothing made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or
mixtures of these fibres with cotton.
Slightly to normally soiled textiles made of
cotton and/or synthetic fibres.
Hardly worn outer and sport clothing made
of cotton, polyester, polyamid and mixed
cotton fabrics.
Curtains and delicate dresses, skirts, shirts
and blouses.
Only woollens with a felt-free finish, labelled
with the woolmark and identified as
machine washable.
Textiles made of linen, silk, wool or viscose
marked as “handwashable”.
––––––
––
––
––
Type of was h/
Degree of soiling
DE
Max.
Detergent and Additives
load
Softe-
Kg
5.0
2.5
3.0
3.0
1.5
1.0
1.0
1.5
5.0
5.0
Main
ner
wash
Yes
❉
Yes
❉
Yes
❉
Yes
❉
Yes
❉
Yes
❉
Yes
❉
–––
–––
❉
––
G
H
Pre-
wash
Start
Delay
Départ
différé
Selectable special options =
Easy
ironing
Repassage
rapide
Pre-
Intensive
wash
Prélavage Rinçage
Rinse
Intensif
❉
Rinse
hold
Arrêt Cuve
Pleine
Speed
reduction
Essorage
❉❉❉❉❉❉❉
–
❉
1)
1)
1)
2)
1)
❉
❉❉❉❉❉❉❉
❉❉
–
❉
–
❉❉
❉
–
❉
–
❉
❉
❉
❉
–
–––
–
❉
–––
–––
––––––
––––
––––
––
❉❉❉
❉❉
–
❉❉
❉❉
❉
❉❉❉
G.“Spin Speed Reduction” button
H.“Reset” button
I. Selectable programmes
Max.
spin
speed
rpm
“Prewash” can be additionally selected for
1400
heavily soiled laundry at any temperature.
“Prewash” can be additionally selected for
1)
1000
heavily soiled laundry.
In this programme the spin speed should be
1400
adapted to the fabrics.
1400
1)
1000
If you select “Rinse Hold” do not leave
1)
1000
items to soak for too long.
If you select “Rinse Hold” do not leave items
2)
to soak for too long. A very gentle spin is used
–
in this programme.
This programme only drains (alternative
method of terminating the programme after
“Rinse Hold” without spinning). In addition all
running programmes can be cancelled with th is
programme.
A very gentle spin is used in this
1)
programme. Same as the spin cycle in the
1000
“Wool” programme.
In this programme spinning is intensive. Same
1400
as the spin cycle in the “Cotton” programme .
Same as the spin cycle in the “Cotton”
1400
programme.
Notes
–
–
5019 601 10031
CONSUMPTION DATA
Temp era tur e
Wash
Programme
(°C)
Cotton
Cotton
Cotton
Synthetic
Synthetic
Daily Mixed
Rapid wash
Delicate
Wool
Silk
*The
** The
*** To reduce
POUR IN DETERGENT, CLOSE THE
DOOR AND SELECT A PROGRAMME
consumption values
programme duration
household conditions and to adapt the programme run time accordingly.
pump drains the water out.
the water temperature
95 5.0 46*** 1.90 2:00
60 5.0 48 0.95 2:10
40 5.0 48 0.60 2:10
60 2.5 55 0.80 1:35
40 2.5 50 0.50 1:25
40 3.0 44 0.45 1:00
30 3.0 35 0.30 0:30
40 1.5 55 0.60 0:45
40 1.0 55 0.60 0:40
30 1.0 45 0.30 0:35
were measured in normalized conditions in compliance with Standard EN/IEC 60456.
may also vary from the chart values. The washing machine is able to allow for particular
(kg)
, some cold water is added at the end of the main wash cycle, before the
Add the detergent as described in the chapter
“Detergent and Additives” in the instructions for use.
1. Turn the
programme selector knob
in any
direction to the desired programme.
The light above the “Start” button flashes.
2. The programme sequence indicator and the
indicator with the maximum possible spin
speed light up.
SELECT SPECIAL OPTIONS The corresponding lights go on (if n ot
selectable: rapid flashing for 3 seconds)
“Easy Ironing” button
• To lessen creasing, the water quantity is
increased and the clothes are spun very gently at
reduced power. This makes your laundry
significantly damper at the end of the
programme.
“Prewash” button
• Only for heavily soiled laundry (for example
sand or granular dirt). Programme duration is
increased by some 15 min.
“Intensive Rinse” button
• An additional rinse cycle is carried out.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with detergent allergies.
Water
Energy
Programme duration **
approx.
(l)
(kWh)
(hours : minutes)
“Rinse Hold” button
• The laundry remains in the last rinse water without
being spun: discoloration of the laundry and
additional creasing are prevented.
• This option is particularly recommended for the
programme “Synthetics” or “Delicates”.
• This function is particularly useful if you want to
postpone spinning to a later time.
The programme has reached the “Rinse
Note:
Hold” when the corresponding light flashes.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with the
appropriate spin cycle for the current programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to “Drain” and press
the “
” button again.
Start
“Spin Speed Reduction” button
• A maximum spin speed is assigned to each
programme.
• Press the button to set another speed for the
spin cycle.
• If no light goes on, the final spin is cancelled.
The water is only drained out.
START DELAY
With the “Start Delay function the appliance can be
run cheaply e.g. at night, when the electricity is
cheaper.
• Press the “Start Delay” button. Select the
programme start from 3 to 12 hours ahead by
pressing the button again.
•Press the
“Start”
button.
The Start Delay indicator light flashes until the
programme starts.
“Start Delay” correction.
• Before the “Start Delay” has been started:
The preset number of hours can be altered by
continuously pressing the “Start Delay” button.
By pressing the Start Delay button again after the
“12” setting, the time delay can be deleted again
or set again.
• After the “Start Delay” has been started:
The preset number of hours can be reduced by
pressing the “Start Delay” button again; please
note, however, that the washing programme
starts IMMEDIATELY, as soon as you activate it
again with the Start Delay switch 3 setting. To
increase the number of hours preselected, first
turn the programme selector switch to the “Off”
position. Then set the programme and the
additional options again and select the desired
number of hours.
PROGRAMME START
After you have selected the programme and the
additional option, the indicator light over the
“Start”
the programme by pressing the
button flashes. Turn on the tap and start
“Start”
button.
Now the indicator light above the button goes on.
In addition, all programme phases are indicated by
the associated lights. After the end of a programme
phase the associated indicator light goes out. Thus
the programme sequence indicator moves from left
to right across the wash, rinse and spin phases. At
the end of the programme only the “End” indicator
is still on.
DOOR LOCKED INDICATOR
As long as a washing programme is running, the lamp
lights up to show that the door cannot be opened.
When the lamp goes off, the door can be opened
again. If
“Start”
has been pressed, but the door is
not latched, the “Door locked” indicator flashes for
10 seconds.
The door must be pushed shut within this time.
After the 10 seconds, the “Door locked” indicator
goes out and the “Start” button flashes. The door
must then be opened and closed again and the
button must be pressed.
“Start”
“TROUBLE” INDICATORS
“Pump”
Waste water is not pumped out. Check wether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
“Water Tap”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide” in the
Instructions for Use.
PROGRAMME END
• The “End” indicator goes on.
1. Set the programme selector knob to the “Off”
position .
2. Turn off the tap.
3. Open the door and unload the machine.
RESELECT AFTER PROGRAMME START
A newly-selected programme will continue in the
same programme section during which the current
programme was interrupted. Therefore do not add
any more detergent.
1. Press the
“Start”
button to interrupt the
programme. The light flashes.
2. Select the new programme (with temperature),
any additional options and - if you wish another spin speed.
3. Press the
“Start”
button again to restart the
programme.
• If you are in the “Prewash” programme step this
additional option can not be deselected as
described (to do this see “Cancel (reset) a
running programme before the end”).
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
Press the “Reset” button for at least 2 seconds. Any
existing water is drained out before the door can be
opened.
5019 601 10031