Whirlpool FL 1265 LA, FL 1265 INSTRUCTION FOR USE
60105033aGB.fm Page 1 Monday, December 4, 2006 5:11 PM
GB FL 1265 PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
C
D
G
H
E. Programme selector
F. “Start” button
A
G. Spin speed selector
H. Programme sequence indicator
I
B
I. “Reset” button
E
F
J. “Start delay” button
Max
Load
Programme
Cotton
60 - 95 °C
Cotton
40 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
Daily load
40 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
30 - 40 °C
Rinse & Spin Rinçage & Essorage
Spin Essorage
Short spin Essorage court
Drain Vidange
❉
: = optional / Yes = dosing required.
1)
For improved garment care, spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care, spin speed is restricted to 400 rpm in this programme.
Coton
60 - 95 °C
Coton
40 °C
Synthétiques
30 - 40 - 60 °C
Délicat
30 - 40 °C
40 °C
Rapide 30min.
30 °C
Laine
Froid - 40 °C
Lavage main
30 - 40 °C
Care
Labels
—
—
—
—
- For temperature selection, respect the manufacturer’s recommendations
kg
on the care label
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts
6.0
etc. made of cotton and linen.
With heavily soiled laundry the additional “Prewash” option can be additionally
5.0
selected.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
2.5
With heavily soiled laundry the additional “Prewash” option can be additionally
selected.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
With heavily soiled laundry the additional “Prewash” option can be additionally
1.5
selected.
Slightly to normally soiled textiles made of cotton and/or synthetics.
3.0
Shortly worn outer clothing made of cotton, polyester, polyamide and blends
3.0
with cotton.
Only woollens with a felt-free finish, labelled with the woolmark and
identified as machine washable.
1.0
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. A very gentle
1.0
spin is used in this programme.
Same as the last rinse and the final spin in the “Cotton” programme.
6.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton”
6.0
programme.
In this programme spinning is gentle. Same as the spin cycle in the “Wool”
1.0
programme.
Drain only - no spinning. Alternative method of terminating programme after
—
“Rinse Hold”.
Type of wash/Notes
Detergents and additives Special options
Pre-
Main
wash
❉
❉
❉
—
—
—
—
——
Softener Start delay
Wash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
❉❉❉❉❉❉❉
❉❉❉❉❉❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
—— —
—— —
Départ
différé
❉
❉
Eco
Eco
—
Prewash
Prélavage
Intensive
rinse
Rinçage
intensif
❉
——
—— —
—— —
—— —
——
—— ——
—— ——
Rinse
Variable
hold
Arrêt
cuve
pleine
—
spin
Essorage
variable
❉❉
❉❉❉
❉❉
❉❉
❉❉
❉❉❉
❉
❉
Max
Spin
Speed
rpm
1200
1000
1000
1200
1200
1000
400
1200
1200
1000
1)
1)
1)
2)
1)
—— — — — — — — — —
5019 601 05033/A
Black process 45.0° 100.0 LPI
60105033aGB.fm Page 2 Monday, December 4, 2006 5:11 PM
CONSUMPTION DATA
Temperature
Programme
(°C)
Cotton 95 6.0 59
Cotton
***
60 6.0 49 1.14 2:20
Load
(kg)
Water
(l)
**
Energy
Approx. Programme
Duration
(kWh)
(hours :minutes)
1.90 2:00
*
Cotton 40 5.0 56 0.70 2:00
Synthetics 60 2.5 50
**
0.80 1:35
Synthetics 40 2.5 46 0.50 1:20
Delicates 30 1.5 60 0.50 0:45
Daily load 40 3.0 41 0.50 1:00
Quick wash 30 3.0 41 0.40 0:30
Wool 40 1.0 60 0.50 0:45
Handwash 40 1.0 45 0.50 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions
*
applicable at that time.
To reduce the water temperature, some cold water is adde d at the e nd of the main wash cycle, bef ore the pump drains the water out.
**
Reference Programme for Energy Label.
***
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives”
in your Instructions for Use.
1. Turn the
programme selector
to the desired
programme and temperature.
2. The
time display
shows the duration of the chosen
programme (in hours and minutes), and the
indication lamp next to the
3. The indication lamp of the predefined
lights up.
speed
“Start”
button flashes.
spin
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the
respective indication lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time
by approximately 15 min.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helping
people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only .
The programme stops to “Rinse hold” at
Note:
the time the “Anticrease” light in the programme
sequence indication is on. The indication lamp
next to the
“Start”
button flashes.
Terminate the “Rinse hold” option:
• Press the
“Start”
button; the programme will
terminate automatically with the final spin cycle
for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the
“Start”
button.
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
START DELAY
The “Start Delay” allows to run the machine at
the consumer’s convenience, for example at night
when electricity is cheaper.
• Select programme, temperature and options.
• Press the “Start Delay” button to select the delay
time by 1, 3, 6, 9 or 12 hours.
• Press the
“Start”
button.
The indication light next to the “Start Delay”
button lights up and the countdown of the delay
time begins.
•The time delay indication disappears when the
programme starts and it is replaced by the
remaining programme time.
• Once having pressed the
“Start”
button, the
number of hours preselected can be reduced by
pressing again the “Start Delay” button.
To cancel the “Start Delay”
..before you press the “Start” button:
• Turn the programme selector to another
position or press the
“Reset”
button.
..after having pressed the “Start” button:
• Press the “Reset” button for at least 3 seconds - the
start delay time disappears from the time display.
PROGR AMME START
Open the tap and press the
indication lamp next to the
“Start”
“Start”
button. The
button lights up.
The programme sequence indicator shows the
current programme phase, running from left to right
through Wash, Rinse, Spin/Drain.
The time display shows the remaining programme
time. Due to variations in load and temperature of inlet
water, the remaining time is newly calculated in certain
programme phases. If this is the case, an animation
appears on the time display.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the
lamp lights to show that the door can be opened. As
long as a wash programme is running, the door
remains locked and must on no account be forced
open. In case you have an urgent need to open it
during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by
a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence
indicator are off, and the “Door open”
indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
“Start”
button to pause the
programme. The light flashes.
2. Select the new programme and, if you want,
another spin speed and any options.
3. Press the
“Start”
button again. The new
programme continues at the same position
where the previous programme was interrupted.
Do not add detergent for this programme.
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The
“Reset”
button cancels a programme before
the end.
• Press the
“Reset”
button for at least 3
seconds. Any existing water is drained out
before the door can be opened.
5019 601 05033/A
Black process 45.0° 100.0 LPI
Loading...