Whirlpool AWM 6091 INSTRUCTION FOR USE
GB AWM 6091
A. Programme Sequence Indicator
B. “Start/Pause” Button
C. “Door Open” Indication
D. Temperature Adjusting Buttons
E. “Spin Speed Reduction” Button
A B C
D E
Selecting any option the indication lights
up. When the combination of programme,
additional options and temperature is not
possible, the indication lights switch off
automatically. Unsuitable combinations of
options are deselected automatically.
i : option / Yes: dosing required
1)
For improved garment care spin speed is
restricted to 800 rpm in this programme.
2)
In this programme default spin speed can be
increased till 400 rpm.
Max.
Load
5,0
2,5 –
Programme
Cotton / Coloured
cotton
Synthetics
Care
Labels
Type of wash / Notes
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made
of cotton and linen.
With heavily soiled laundry the additional “Prewash” option can be selected as well.
Normally soiled blouses, shirts, overalls etc. made of polyester ( Diolen, Trevira),
polyamide (Perlon, Nylon) or blends with cotton.
Daily Slightly to normally soiled textiles made of cotton and/or synthetic. 3,0 –
Rapid Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. 3,0 –
Delicates Curtains and delicate clothing, dresses, skirts, shirts and blouses. 1,5 –
kg
Detergents and Additives Special options Max.
Bleach Softener Main
i i
i
i
i
i
Pre-
Wash
Prewash Intensive
wash
wstępne
Yes
Yes
i i i i i
i i i i i
Yes – –
Yes – –
Yes
i i
Pranie
Rinse
Super
płukanie
i i i
i i i
–
Only woollens with a felt-free nish, labelled with the woolmark and identied as
Wool
machine washable.
1,0 –
Yes – – –
i
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
Handwash
If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is
1,0 –
Yes – – –
i
used in this programme.
Rinse + Spin – Same as the last rinse and the nal spin in the “Coloured cotton” programme. 5,0 –
Spin –
In this programme spinning is intensive. Same as the spin cycle in the “Coloured cotton”
programme.
5,0 – – – – – – –
i
– – –
i i i
Gentle Spin – In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. 1,5 – – – – – – –
Rinse
Hold
Stop
płukanie
i i
i i
i i
Spin Speed
Reduction
Prędkość
wirowania
1)
1)
1)
2)
i
1)
i
Spin
Speed
rpm
900
800
900
900
800
800
400
900
900
800
Programme
Bawełniane
1)
Syntetyczne
Codzienne
Program
szybki
1)
1)
2)
1)
Selector
60 min
Delikatne
Wełniane
Pranie
ręczne
Płukanie i
wirowanie
Wirowanie
Delikatne
wirowanie
Drain –
Drain only - no spinning. Alternative method of terminating the synthetic, delicate and
wool programmes and for premature removal of the laundry.
– – – – – – – – – –
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 10116/A
Wypompowanie
CONSUMPTION DATA
Programme
Temperature
Selector
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme
Duration
(hours : minutes)*
Cotton 95 4,5 49** 1,70 2:05
Cotton 60 5,0 46 0,95 2:20
Cotton 40 4,5 44 0,60 2:05
Synthetics 60 2,0 55 0,80 1:30
Synthetics 40 2,0 55 0,60 1:20
Daily 40 3,0 44 0,45 1:00
Rapid 30 3,0 37 0,40 0:30
Delicates 30 1,5 60 0,50 0:45
Wool 30 1,0 60 0,30 0:40
Handwash 30 1,0 60 0,30 0:50
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized
conditions in compliance with standard IEC 60456. Consumption data in the home may vary with respect to the values in
the table in relation to the water supply pressure and temperature, the load and the type of wash.
* The remaining time indicator can similarly deviate from the values in the table, because it takes into
account the household conditions applicable at that time.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the
pump drains the water out.
ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME
Add the detergents as described in the programme
table or in the chapter “Detergents and Additives” in
the booklet.
1. Turn the programme selector to the desired
programme.
2. The pilot lamp of the “Start/Pause” button is
flashing.
3. Select the temperature by pressing “+” or “-”
button bellow the temperature display.
4. Select the spin speed by pressing the spin
speed button - the selected spin speed is
indicated by the LED.
5. Select any desired option by pressing the option
button.
SELECT ANY DESIRED OPTION
Selecting any option the indication lights up.
When the combination of options, temperature
and spin speed is not possible, the indication
lights switch off automatically. Unsuitable
combinations of options are deselected
automatically.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. The cycle time increases
approximately 15 min.
“Intensive Rinse” button
• More water and a longer time in rinse cycle is
added.
• This option is particulary suitable for areas with
very soft water, washing baby linen and people
with detergents allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to
avoid creasing and prevent colours from
changing.
• This option is particularly recommended for the
programme “Synthetics”, “Daily” and
“Delicates”.
• This function is particularly useful if you want to
postpone spinning to a later time, or if you want
to drain only.
Note: The programme stops to “Rinse Hold” at the
time the “Rinse Hold” light in the programme flow
indication is on.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with the
final spin cycle for the present wash
programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the “Start/Pause”
button again when flashing. You have to press
“Start” button within 15 second after
reselecting the programme.
“Spin Speed Reduction” button
• Every programme has an automatic predefined
maximum spin speed.
• Press the button to set another spin speed.
• If the spin speed “0” is selected, the final
spinning is cancelled but intermediate spin
peaks remain during rinse. The water is drained
out only.
PROGRAMME START
Open the tap and press the “Start/Pause” button.
The pilot lamp of the “Start/Pause” button lights
up. The indicator lamps show the sequence
reached in the programme. After starting the
programme, the sequence indication runs from left
to right through Wash, Rinse, Spin.
When the sequence of the programme is finished
the corresponding lamp goes out.
PROGRAMME CHANGE
The door can be opened when the “Door Open”
indication is on.
PROGRAMME END
• All the lights of the programme sequence
indication are off.
1. Turn the programme selector to the “ “
position.
2. Turn the water supply tap off.
3. Open the door and unload the machine.
4. Close the tap and leave the door ajar to allow
the drum to dry out.
CHANGE THE PROGRAMME DURING THE
WASH CYCLE
1. Press the “Start/Pause” button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the “Start/Pause” button again. The new
programme continues at the same position
where the previous programme was interrupted.
Do not add detergent for this programme.
CANCEL A PROGRAMME BEFORE THE END
1. Press the “Start/Pause” button to pause the
programme. The light flashes.
2. Set the programme selector to “Drain”. The spin
indicators show “0”.
3. Press the “Start/Pause” button to start the
drain programme.
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 10116/A
Loading...