Whirlpool AWG 510 I INSTRUCTION FOR USE

Whirlpool is a registered trademark of Whirlpool USA

30120216GB.fm Page 1 Friday, July 18, 2008 11:36 AM

AWG 5101 PROGRAMME CHART

E. Programme selector F. “Start” button G. “Variable spin” selector T. “Intensive rinse” button H. Programme sequence indication I. “Prerinse” button J. “On/Off” button

Programme

White Cotton

Antibacterial

Cotton

Synthetics

Delicates

Wool

Handwash

Quickwash

Algod.

Sintéticos

Delicados

Lana/lã

A mano/mão

Rápido

Tempe-

rature

75 - 90 °C

60 °C

30 - 40 °C

30 - 60 °C

frío - 40 °C

30 °C

35 °C

Care

Labels

—

Max. Load

Type of wash/Notes

- For temperature selection, respect the manufacturer’s recommendations on the care

label

7.0 Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.

made of cotton and linen. At a temperature of 80°C or more, this programme eliminates bacteria, ensuring

7.0 sanitization of your laundry . The bacteria removal efficiency has been tested following

a similar methodology to the NF EN 13697 standard of Nov. 2001.

7.0

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),

3.5

polyamide (Perlon, Nylon) or blends with cotton.

3.5 Curtains and delicate clothing, skirts, shirts and blouses.

Only woollens labelled with the Woolmark and identified as machine washable.

1.5

This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.

3.0

Curtains and delicate clothing in wool or silk only washable in cold water.

Outer clothing worn for short periods and made of cotton, polyester, polyamide and

3.5

cotton blends.

Detergents and additives Special functions

Pre-

Main

wash

—

wash

Yes

Softener Pre-

LL L L

Intensive

wash

Prelav.

rinse

Aclar./enx.

Extra

——

Variable

spin

Centrif.

Max.

spin

speed

rpm

Max.

800

500

800

Max.

Rinse

Drain/Spin

: optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

* Programmes according to EN 60456.

Black process 45.0° 150.0 LPI

Aclarado/Enx.

Desagüe/Drenag.

——

7.0

Same as the last rinse and the final spin in the “Cotton” programme. In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

7.0

programme.

The “wool” programme of this washing machine has been approved by The Woolmark Company for the washing

of garments labelled as “machine washable”. Follow the instructions given on the label sewn on the garment and

the instructions supplied by the washing-machine manufacturer. (Cert. no. M0402-M0403-M0404-M0405).

——

—

—— — — —

5019 301 20216

Max.

Whirlpool is a registered trademark of Whirlpool USA

30120216GB.fm Page 2 Friday, July 18, 2008 11:36 AM

CONSUMPTION DATA

Programme

Temperature

(°C)

White Cotton / Antibacterial 90 7.0 69

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. programme duration

(hours : minutes)

2.40 2:10

Cotton 75 7.0 65 1.80 2:08

Cotton with “Eco”

***

60 7.0 67 1.15 2:16

Cotton 40 7.0 67 0.65 2:05

Synthetics 60 3.5 56

0.85 1:42

Synthetics 40 3.5 54 0.51 1:30

Delicates 30 3.5 55 0.24 0:48

Wool 40 1.5 53 0.41 0:47

Quickwash 35 3.5 37 0.34 0:40

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. In domestic use, consumption data may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The time indicated on the display (if present) can deviate from the values in the table, because it takes into account the household

conditions applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Reference programme for energy label.

***

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in the Instructions for Use.

1. Press the “On/Off” button.

2. Turn the

programme selector

to the desired

programme.

SELECT ANY DESIRED OPTION

Press the button(s) of any required option(s) - the respective indicator lights up.

When the combination of programme and additional option(s) is not possible, the indicators switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (e.g. sand, granular dirt). Increases the cycle time by approx. 15 minutes.

• Do not use liquid detergent for the main wash when activating the prewash option.

“Intensive rinse” button

• More water is added and the rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water, washing baby linen, and helps people with allergies.

“Variable spin” selector

• Every programme has a predefined maximum spin speed.

• Rotate the selector to set another spin speed.

• If spin speed “0” is selected, the final spin is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

PROGRAMME START

Open the tap and press the next to the

“Start”

button lights up. The

“Start”

. The indicator

programme sequence indicator shows the current programme stage, running from left to right through Prewash/Wash, Rinse, Spin/Drain, End.

“DOOR OPEN” INDICATOR

At the end of a programme, the

“End”

indicator lights up signalling that the door can be opened. As long as a wash programme is running, the door remains locked and must not be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

PROGRAMME END

• Lighting up of the lamp on the wash sequence

indicator means that the programme has ended and the door is unlocked.

1. Turn the programme selector to the “O”

position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

5. Press the “On/Off” button.

CHANGING PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Turn the programme selector to “O”.

2. Select the new programme, any options and

another spin speed if you want.

3. Press the

“Start”

button again. The new programme resumes the wash programme from where the previous one was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

• Reset by turning the programme selector to “O” and select the “Drain Spin” programme to remove the water remaining in the bowl before the door can be opened.

Black process 45.0° 150.0 LPI

5019 301 20216