CAUTION: Read the
instructions before using
appliance.
Before using the appliance,
read these safety instructions.
Keep them nearby for future
reference.
These instructions and the
appliance itself provide
important safety warnings, to
be observed at all times. The
manufacturer declines any
liability for failure to observe
these safety instructions, for
inappropriate use of the
appliance or incorrect setting
of controls.
Very young children
(0-3years) should be kept away
from the appliance. Young
children (3-8years) should be
kept away from the appliance
unless continuously
supervised. Children from
8years old and above and
persons with reduced physical,
sensory or mental capabilities
or lack of experience and
knowledge can use this
appliance only if they are
supervised or have been given
instructions on safe use and
understand the hazards
involved. Children must not
play with the appliance.
Cleaning and user
maintenance must not be
carried out by children without
supervision.
Never open the door forcibly or
use it as a step.
PERMITTED USE
CAUTION: The appliance is
not intended to be operated by
means of an external switching
device, such as a timer, or
separate remote controlled
system.
This appliance is intended to
be used in public areas and
applications such as: sta
kitchen areas in shops, oces
and other working
environments; farm houses; by
clients in hotels, motels, bed &
breakfasts and other
residential environments.
Do not load the machine
above the maximum capacity
(kg of dry cloth) indicated in
the programme table.
Do not use the appliance
outdoors.
Do not use any solvents (e.g.
turpentine, benzene),
detergents containing
solvents, scouring powder,
glass or general purpose
cleaners, or ammable uids;
do not machine wash fabrics
that have been treated with
solvents or ammable liquids.
INSTALLATION
The appliance must be
handled and installed by two
or more persons- risk of injury.
Use protective gloves to
unpack and install- risk of cuts.
If you want to stack a dryer on
top of your washing machine,
rst contact our After-Sales
Service or your specialist dealer
to verify whether this is
possible. This is only possible if
the dryer is attached to the
washing machine by means of
appropriate stacking kit
available through our AfterSales Service or your specialist
dealer.
Move the appliance without
lifting it by the worktop or top
lid.
Installation, including water
supply (if any) and electrical
connections and repairs must
be carried out by a qualied
technician. Do not repair or
replace any part of the
appliance unless specically
stated in the user manual. Keep
children away from the
installation site. After
unpacking the appliance, make
sure that it has not been
damaged during transport. In
the event of problems, contact
the dealer or your nearest
After-sales Service. Once
installed, packaging waste
(plastic, styrofoam parts etc.)
must be stored out of reach of
children- risk of suocation.
The appliance must be
disconnected from the power
supply before any installation
operation- risk of electric
shock. During installation,
make sure the appliance does
not damage the power cablerisk of re or electric shock.
Only activate the appliance
when the installation has been
completed.
In the event of failure, only
original spare parts must be
used. Repairs must be carried
out by our authorised After
Sales Service.
Do not install your appliance
where it may be exposed to
extreme conditions, such as:
poor ventilation, temperatures
below 5°C or above 35°C.
When installing the
appliance make sure that the
5
four feet are stable and resting
on the oor, adjusting them as
required, and check that the
appliance is perfectly to level
using a spirit level.
If the appliance is being
installed on wood or “oating”
oors (certain parquet and
laminate materials), secure a
60x60x3cm (at least) sheet of
plywood to the oor then
place the appliance on top of
this.
Connect the water inlet
hose(s) to the water supply in
accordance with the
regulations of your local water
company.
For cold ll only models: do
not connect to the hot water
supply.
For models with hot ll: the
hot water inlet temperature
must not exceed 60°C.
The washing machine is
tted with transport bolts to
prevent any possible damage
to the interior during transport.
Before using the machine, it is
imperative that the transport
bolts are removed. After their
removal, cover the openings
with the 4 enclosed plastic
caps.
After installation of the
device, wait a few hours before
starting it so that it acclimates
to the environmental
conditions of the room.
Make sure that the
ventilation openings in the
base of your washing machine
(if available on your model) are
not obstructed by a carpet or
other material.
Use only new hoses to
connect the appliance to the
water supply. The old hose-sets
should not be reused.
The supply water pressure
must be in the 0.1-1Mpa
range.
ELECTRICAL WARNINGS
It must be possible to
disconnect the appliance from
the power supply by
unplugging it if plug is
accessible, or by a multi-pole
switch installed upstream of
the socket in accordance with
the wiring rules and the
appliance must be earthed in
conformity with national
electrical safety standards.
The appliance shall be
disconnected from its power
source during service and
when replacing parts.
Furthermore the removal of
the plug must be such that an
operator can check from any of
the points to which they have
access that the plug remains
removed.
Do not use extension leads,
multiple sockets or adapters.
The electrical components
must not be accessible to the
user after installation. Do not
use the appliance when you
are wet or barefoot. Do not
operate this appliance if it has a
damaged power cable or plug,
if it is not working properly, or
if it has been damaged or
dropped.
If the supply cord is
damaged, it must be replaced
with an identical one by the
manufacturer, its service agent
or similarly qualied persons in
order to avoid a hazard- risk of
electric shock.
CLEANING AND
MAINTENANCE
WARNING: Ensure that the
appliance is switched o and
disconnected from the power
supply before performing any
maintenance operation; never
use steam cleaning
equipment- risk of electric
shock.
For the details of inspections
and maintenance required for
safe operation, please see the
Use and Care Guide.
DISPOSAL OF PACKAGING
MATERIALS
The packaging material is
100% recyclable and is marked
with the recycle symbol
.
The various parts of the
packaging must therefore be
disposed of responsibly and in
full compliance with local
authority regulations
governing waste disposal.
DISPOSAL OF HOUSEHOLD
APPLIANCES
This appliance is manufactured
with recyclable or reusable
materials. Dispose of it in
accordance with local waste
disposal regulations. For
further information on the
treatment, recovery and
recycling of household
electrical appliances, contact
your local authority, the
collection service for
household waste or the store
where you purchased the
appliance. This appliance is
marked in compliance with
European Directive 2012/19/
EU, Waste Electrical and
Electronic Equipment (WEEE).
By ensuring this product is
disposed of correctly, you will
help prevent negative
consequences for the
environment and human
health.
The symbol
on the product
or on the accompanying
documentation indicates that
it should not be treated as
domestic waste but must be
taken to an appropriate
collection center for the
recycling of electrical and
electronic equipment.
6
DECLARATION
OF CONFORMITY
Mr. Stefano Demattè, Global Platform Leader, Horizontal Axis Washers, representative of
Whirlpool EMEA S.p.A
Via Carlo Pisacane n.1, 20016 Pero (MI), Italy
declare under our sole responsibility that the product
to which this declaration relates is in conformity with the following standard(s) or other normative document(s)
EN 60335-1:2012+A11:2014+AC:2014
EN 50571:2013
EN 61770:2009
EN 62233:2002+Ber.1:2008
EN 55014-1: 2006+A1:2009+A2:2011
EN 55014-2: 1997+A1:2001+A2:2008
EN 61000-3-2: 2014
EN 61000-3-3: 2013
Colour detergents without whitener / optical brighteners
CONTROL PANEL
13.12.
HT
MAX
1.7.2.
6.8.4.10.3.9.5.11.
1. On/Off button (Reset/Drain if long pressed)
2. Programme button
3. Colours 15° button
4. Fresh Care button
5. Dosing Aid button (Dosing Aid settings if long
pressed)
6. Knob (Turn to select / Press to confirm)
7. Start delay button
8. Temperature button
9. Spin speed button
10. Options button (Key lock if long pressed)
11. Start/Pause button
12. Display
13. Programmes area
9
TECHNICAL DATA FOR WATER
CONNECTION
WATER CONNECTION
WATER SUPPLYCold
WATER TAP3/4” threaded hose connector
MINIMUM WATER SUPPLY PRESSURE100 kPa (1 bar)
MAXIMUM WATER SUPPLY PRESSURE1000 kPa (10 bar)
10
DOOR
EN
To open the door, pull the handle
To close the door, hold the handle and push so that
you can hear it click shut.
DRUM LIGHT (if available)
• During programme selection: the light goes on
for laundry loading
• After programme start, the light fades on and o
while the laundry load is detected.
• After programme end, when you open the door,
the light goes on for a while for unloading the
laundry. Then it goes o to save energy; touch
any button to switch it on again.
ACCESSORIES
Contact our After-Sales Service to check if the
following accessories are available for your washing
machine (and dryer) model
STACKING KIT SHELF
by which your dryer can be xed on top of your
washing machine to save space and to facilitate
loading and unloading your dryer in the higher
position.
11
HOW TO USE
THE APPLIANCE
FIRST TIME USE
If you plug in the washing machine, it will switch
on automatically.
To remove residues from manufacturing,
1. Select programme “Cotton” with temperature
HT. Consider the instructions in paragraph “DAILY
USE”.
2. Add a small amount of heavy duty detergent
(maximum 1/3 of the quantity the detergent
manufacturer recommends for lightly soiled
laundry) to the main wash compartment of the
detergent dispenser.
3. Start the programme without adding any
laundry. See information on how to select and start
a programme in paragraph “DAILY USE”.
12
DAILY USE
SORTING YOUR LAUNDRY
EN
1. REMOVE ALL OBJECTS FROM
POCKETS
• Coins, pins etc. can damage your
laundry as well as parts of the washing
machine.
• Objects like paper handkerchiefs will tear into
small pieces which must be removed manually
after the wash.
2. CLOSE ZIP FASTENERS,
BUTTONS OR HOOKS. TIE LOOSE
BELTS OR RIBBONS TOGETHER.
• Wash small items (e.g. nylon stockings, belts etc.)
and items with hooks (e.g. bras) in a laundry bag
or pillow case with zip fastener. Always remove
curtain rings, or wash curtains with the rings
safely tied inside a cotton bag.
3. TYPE OF FABRIC / CARE LABEL SYMBOL
Cottons, mixed bres, easy care / synthetics, wool,
handwash items.
• Colour
separate coloured and white items. Wash new
coloured articles separately.
• Size
Wash items of dierent sizes in the same
wash load, to improve washing eciency and
distribution of the articles in the drum.
• Delicates
Wash delicate items separately; they require
gentle treatment.
13
HOW TO USE THE WASHING MACHINE
1.LOAD LAUNDRY
• Open the door and load the laundry.
Observe the maximum load sizes given in
the programme chart.
2.CLOSE DOOR
• Make sure that no laundry gets
stuck between door glass and
rubber seal.
• Close the door so that you can hear it click shut.
3. OPEN WATER TAP
• Make sure that the washing machine is
connected to the mains.
• Open the water tap.
4.SWITCH ON WASHING MACHINE
• Press the On/O button until the
programme button lights up. An
animation will appear, and there will be a sound.
Afterwards the washing machine is ready to be
operated.
• The programme setting which you used last will
appear on the control panel.
5. SET THE DESIRED PROGRAMME
GUIDED MODE
the button light will guide you through setting a
programme in the following order: selection of
programme / temperature / spin speed / options.
As soon as you conrm a selection by pressing the
knob, the button light will jump to the next step.
Find more information regarding programmes in
the Programme Chart.
Change temperature, if needed
If you want to change the temperature
indicated on the display, make sure that the
Temperature button « lights up.
Turn the knob to select the desired temperature,
then press the knob to conrm.
Change spin speed, if needed
If you want to change the spin speed
indicated on the display, make sure that the
Spin button lights up.
Turn the knob to select the desired spin speed, or
Rinse hold , then press the knob to conrm.
If you select spin speed “0”, the programme ends
with draining the rinse water. No nal spin cycle
will be applied.
If you select “Rinse hold”, the programme will
stop after the rinse phase. The laundry will remain
immersed in the last rinse water. See more
information in section PROGRAMMES, OPTIONS
AND FUNCTIONS / Rinse hold.
Select programme
Make sure that the programme button lights up.
Turn the knob to select the desired programme.
The indicator next to the selected programme
lights up.
Conrm the desired programme by pressing the
knob.
14
Loading...
+ 32 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.