Whirlpool AWE 5090, AWE 5110 INSTRUCTION FOR USE

A. Programme selector

B. Programme sequence indicator

C. “Start(Pause)” button

D. “Reset” button

E. “Door open” indicationThis washing

PROGRAMME CHART

X00/X00

tours

E F

machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately: F. “Service” indication G. “Water tap closed” indication H. “Clean pump” indication

Do not use liquid detergent.

2) For improved garment care, spin speed is restricted

in these programmes.

Max.

Programme

Cotton

with prewash

95°C

Cotton

40 - 60 - 95°C

Cotton rapid

60 °C

Synthetics

with prewash

60°C

Synthetics

30 - 40 - 60°C

Delicates

30°C

Quick wash 15'

30°C

Wool

Cold - 40°C

Handwash

40°C

Rinse & Spin

Spin Essorage – 5.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. – – –

Gentle Spin Essorage doux – 1.0 In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. – – –

Coton

95°C

Coton

40 - 60 - 95°C

Coton Rapide

60 °C

Synthétique

60°C

Synthétique

30 - 40 - 60°C

Délicat

30°C

Chrono

30°C

Laine

Froid - 40°C

Lavage main

40°C

Rinçage &

Essorage

Care

Labels

Load

5.0 Heavily soiled whites such as bed linen, table linen, underwear and towels made of cotton and linen. Yes Yes

5.0 Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. – Yes

Normally to heavily soiled cotton laundry washable at 60°C. Faster alternative to “Cotton” programme for

5.0 washing your cotton laundry at 60°C.

Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or

3.0 blends with cotton.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or

3.0 blends with cotton.

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses. – Yes

Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends with cotton. Refresh

3.0 programme. Use lowest recommended detergent amount.

1.0 Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable. – Yes

1.0 Textiles made of linen, silk, wool and viscose marked as “handwashable”. – Yes

– 5.0 Same as the last rinse and the final spin in the “Cotton” programme. – –

- for temperature selection, respect the manufacturer's recommendations on the care label

Type of wash / Notes

Detergents and Additives Special options Spin Pre-

wash

Yes Yes

Main

Wash

– Yes

Softener Spin speed

reduction

X00/X00

tours

i i i

Rinse

hold

Arrêt cuve

pleine

– max.

– 1000

Speed

rpm

max.

1000

max.

1000

400

max.

Drain Vidange – – Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”. – – – – – –

N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.

Yes = dosing required / i = optional

5019 312 11155

CONSUMPTION DATA

Programme

Cotton

Temperature

(°C)

95 5.0

Load

(kg)

Water

(l)

50*

Energy

Approx. Programme

Duration

(kWh)

(hours : minutes)

1.70 2:05 Cotton** 60 5.0 47 0.89 2:45 Cotton** 60 2.5 32 0.68 2:10

Cotton 40 5.0 47 0.65 2:00

Cotton** 40 2.5 32 0.52 1:45

Cotton rapid 60 5.0 47 0.95 2:10

Synthetics 60 3.0 50* 0.90 2:05 Synthetics 40 3.0 40 0.50 1:50

Delicates 30 1.5 50 0.55 0:41

Quick wash 15' 30 3.0 30 0.15 0:15

Wool 40 1.0 55 0.55 0:45

Handwash 40 1.0 40 0.40 0:35

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). * To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. ** Reference Programmes for Energy Label.

PREPARATION OF THE WASH CYCLE

1. Load the machine, close the drum doors and checkm

that they are properly locked.

2. Add detergent and eventual additives as described on

the front page and in your Instructions for use.

3. Close the lid.

4. Turn the programme selector to the desired

programme and temperature. The lamp next to the

“Start(Pause)” button flashes.

SELECT THE DESIRED OPTION(S)

Selecting or deselecting an option can be done at any time during the programme. The option will be applied as long as the corresponding programme phase has not been executed yet.

“Spin speed reduction” button

• Reduces the predetermined automatic maximum spin speed to treat your laundry more gently.

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the “Synthetics” and “Delicates” programmes.

• It is useful if you want to postpone spinning to a later time, or if you want to drain out only.

• If you select “Rinse Hold”, do not leave items to soak for too long.

• As soon as the appliance stops in the rinse hold, the “Rinse hold” lamp of the sequence indicator lights up and the lamp next to the “Start(Pause)” button flashes.

Terminate the “Rinse hold” option:

• Press the “Start(Pause)” button; the programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start(Pause)” button.

PROGRAMME START

Open the tap and press the “Start(Pause)” button. The indication lamp next to the “Start(Pause)” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. When the programme phrase is finised, the corresponding indication goes out.

• Note: If there is a power interruption or if the appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the lid can be opened. As long as a wash programme is running, the lid remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your “Instructions for Use”; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap: if the indications still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned: in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open lid and drum and unload the machine. Leave the lid open for some time to allow the interior of the machine to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “Start(Pause)” button to pause the programme. The light flashes.

2. Select the new programme, any options and another spin speed if you want.

3. Press the “Start(Pause)” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end. Press the “Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened.

5019 312 11155