Whirlpool AWE 4316/P INSTRUCTION FOR USE

GB AWE 4316/P

A. Programme selector

B. Programme sequence indicator

C. “Start/Pause” button

D. “Reset” button

E. “Door open” indication

PROGRAMME CHART

G

H

A

B

E
F

D

This washing machine is equipped with
automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately:
F. “Service” indication
G. “Water tap closed” indication
H. “Clean pump” indication

1)

Do not use liquid detergent for main wash if you

C

have activated prewash option.

2)

For improved garment care, spin speed is restricted

to 400 rpm in this programme.

Programme

Cotton

40 - 60 - 95 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily Mixed

40 °C

Quick wash

30 °C

Wool

20 - 40 °C

Handwash

30 - 40 °C

Rinse & Spin

Spin

Bawełniane

40 - 60 - 95 °C

Syntetyczne

30 - 40 - 60 °C

Delikatne

30 - 40 °C

Codzienne

40 °C

Program szybki

30 °C

Wełniane

20 - 40 °C

Pranie rêczne

30 - 40 °C

Płukanie i
wirowanie

Wirowanie

Care

Max.
Load

Type of wash / Notes

Labels

kg

- for temperature selection, respect the manufacturer's recommendations on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of
cotton and linen.

5.0

For washing heavily soiled laundry, the “Prewash” option can be selected.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide

2.5
(Perlon, Nylon).

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

3.0 Slightly to normally soiled textiles made of cotton and/or synthetics. – Yes

3.0 Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. – Yes

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine

1.0
washable.

1.0 Textiles made of linen, silk, wool and viscose marked as “handwashable”. – Yes

– 5.0 Same as the last rinse and the final spin in the “Cotton” programme. – –

Detergents and Additives Special Options Max.

Pre-

Main

wash

i

Wash

Yes

1)

Softener Pre-

wash

Pranie

wstêpne

i i

Eco

Eco

i

95°C

only

i

i i

1)

Yes

i

60°C

only

1)

Yes

i

– Yes

i i

i

i

i

i

i

– –

– –

– – –

– – – – 400

– –

– –

– 5.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. – – – – – –

Intensive

rinse

Super

płukanie

i i

i i

i i

i i

i i

Spin speed

reduction

Prêdkość
obrotowa

400

i

i

i

Spin

Speed

rpm

800

800

800

800

800

800

2)

800

800

Gentle Spin

Drain

Delikatne

wirowanie

Wypompowanie

– 1.0 In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. – – – – – –

– – Drain only - no spinning. – – – – – – – –

N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.

i

Whirlpool is a registered trademark of Whirlpool USA.

800

5019 312 10498

CONSUMPTION DATA

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme

Duration

(hours : minutes)

Cotton 95 5.0 50* 1.70 2:05

Cotton** 60 5.0 48 0.85 2:30

Cotton 40 5.0 55 0.55 2:00
Synthetics 60 2.5 50* 0.80 1:30
Synthetics 40 2.5 45 0.45 1:15

Delicates 40 1.5 50 0.55 0:45
Daily Mixed 40 3.0 40 0.45 1:00
Quick wash 30 3.0 35 0.40 0:30

Wool 40 1.0 55 0.55 0:45

Handwash 40 1.0 40 0.40 0:35

Prewash cycle increases programme duration by aproximately 20 min. Consumption values were measured in normalized conditions in
compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to
the water supply pressure and temperature, the load and the type of wash.
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water
out.
** Reference Programme for Energy Label.

PREPARATION OF THE WASH CYCLE

1. Load the machine, close the drum doors and check
that they are properly locked.

2. Add detergent and additives into the dispenser to
no more than the “MAX” level mark, as follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Stain remover agents

• Anti-scale agents (if necessary)

3. Close the lid.

4. Turn the programme selector to the desired
programme and temperature. The lamp next to the
“Start/Pause” button flashes.

SELECT THE DESIRED OPTION(S)

Selecting or deselecting an option can be done at
any time during the programme. The option will be
applied as long as the corresponding programme
phase has not been executed yet.

“Prewash” button

• Only for heavily soiled loads (for example sand,

granular dirt) sensible. Increases the cycle time by
approximately 20 min.

“Eco” button

• With a modified temperature profile and a slightly

prologned washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.

• Selectable for programmes Cotton 95°C and
Synthetics 60°C only.

“Intensive rinse” button

• The amount of water is increased to ensure a more

intensive rinse.

• This option is particularly suitable for areas with very
soft water, washing baby linen and people with skin
allergies.

“Spin speed reduction” button

• Reduces the predetermined automatic maximum

spin speed to treat ypour laundry more gently.

PROGRAMME START

Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause” button
lights up. The programme sequence indicator shows
the current programme phase, running from left to right
through Wash, Rinse, Spin/Drain. When the programme
phrase is finised, the corresponding indication goes out.

• Note: If there is a power interruption or if the
appliance is disconnected during the cycle, the
programme will run again from the point where it
was interrupted.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp
lights to show the the lid can be opened. As long as a
wash programme is running, the lid remains locked and
must on no account be forced open. In case you have
an urgent need to open it during a running programme,
refer to “Cancel (Reset) a running programme before
the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused
by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for Use”;
if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open
the water tap: if the indications still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned: in the
latter case refer to the Instructions for Use (“Removing
the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator

are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O”
position.

2. Close the water tap.

3. Open lid and drum and unload the machine.

4. Leave the lid open for some time to allow the
interior of the machine to dry.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the
programme. The light flashes.

2. Select the new programme, any options and another
spin speed if you want.

3. Press the “Start/Pause” button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END

The “Reset” button cancels a programme before the
end. Press the “Reset” button for at least 3 seconds.
Any existing water is drained out before the door can be
opened.

Whirlpool is a registered trademark of Whirlpool USA.

5019 312 10498