Whirlpool AWE 2017 INSTRUCTION FOR USE

GB AWE 2017 EMOTION

PROGRAMME CHART

A. Programme selector	B
B. Programme sequence indicator
G	E
H	F
C. “Start / Pause” button	D
D. “Reset” button
E. “Door open” indication	A

C

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately:

F.“Service” indication

G.“Water tap closed” indication

H.“Clean pump” indication

1)Do not use liquid detergents.

2)For improved garment care, spin speed is restricted to 400 rpm in this programme.

Max.

Type of wash / Notes

Detergents and additives

Special Options

Max.

Care

load

Pre-

Main

Softener

Rinse

Spin speed

Spin

Programme

wash

wash

Hold

reduction

Speed

Labels

- For temperature selection, respect the manufacturer’s recommendations on the

kg

care label

rpm

Cotton with prewash

5.0

Heavily soiled whites such as bed linen, table linen, underwear and towels

Yes

Yes 1)

500

95°C

95 °C

made of cotton and linen.

Cotton

5.0

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts

—

Yes

500

40° - 60° - 95°C

40 - 60 - 95 °C

etc. made of cotton and linen.

Synthetics with prewash

2.5

Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),

Yes

Yes 1)

500

60°C

60 °C

polyamide (Perlon, Nylon) or blends with cotton.

Synthetics

2.5

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,

—

Yes

500

30° - 40° - 60°C

30 - 40 - 60 °C

Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Delicates

1.5

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

—

Yes

500

30°C

30°C

Quick wash

3.0

Shortly worn outer clothing made of cotton, polyester, polyamide and blends

—

Yes

500

30°C

30 °C

with cotton.

Wool

1.0

Only woollens with a felt-free finish, labelled with the woolmark and identified

—

Yes

500

cold - 40°C

as machine washable.

- 40 °C

Handwash

1.0

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

—

Yes

—

400 2)

30 - 40°C

30 - 40 °C

Rinse & Spin

—

5.0

Same as the last rinse and the final spin in the “Cotton” programme.

—

—

500

Spin

—

5.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

—

—

—

—

500

programme.

Gentle spin

—

1.0

In this programme spinning is gentle. Same as the spin cycle in the “Wool”

—

—

—

—

500

programme.

Drain

—

—

Drain only - no spinning. Alternative method of terminating programme after “Rinse

—

—

—

—

—

—

Hold”.

N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.

Whirlpool is a registered trademark of Whirlpool USA

5019 312 10576

CONSUMPTION DATA

	Temperature	Load	Water	Energy	Approx. Programme
Programme					Duration
	(°C)	(kg)	(l)	(kWh)	(hours : minutes)
Cotton	95	5.0	50*	1.70	2:05
Cotton **	60	5.0	45	0.85	2:30
Cotton	40	5.0	55	0.55	2:00
Synthetics	60	2.5	50*	0.80	1:30
Synthetics	40	2.5	45	0.45	1:15
Delicates	40	1.5	50	0.55	0:45
Quickwash	30	3.0	35	0.40	0:30
Wool	40	1.0	55	0.55	0:45
Handwash	40	1.0	40	0.40	0:35
Handwash	30	1.0	40	0.30	0:35

Prewash cycle increases programme duration by approximately 20 min. Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, load and type of wash.

*To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

**Reference programme for energy label.

				“Rinse Hold” button
PREPARATION OF THE WASH CYCLE
				•	The laundry remains in the last rinse water
1.	Load the machine, close the drum doors and
	check that they are properly locked.				without progressing to the final spin cycle to avoid
2. Add detergent and additives into the dispenser to					creasing and prevent colours from changing.
				•	This option is particularly recommended for the
	no more than the “MAX” level mark, as follows:
• Programme with pre and main wash					“Synthetics” and “Delicates” programmes.
				•	It is useful if you want to postpone spinning to a
•	Main wash programme without prewash
• Fabric softeners and conditioners					later time, or if you want to drain only.
				•	If you select “Rinse hold”, do not leave items to
•	Stain remover agents
					soak for too long.
• Anti-scale agents (if necessary)
				•	As soon as the appliance stops in the rinse hold,
3.	Close the lid.
					the “Anticrease” lamp of the programme
4. Turn the programme selector to the desired
					sequence indicator lights up and the lamp next to
	programme and temperature. The lamp next to
					the “Start/Pause” button flashes.
	the “Start/Pause” button	flashes.
				Terminate the “Rinse hold” option		:
SELECT THE DESIRED OPTION(S)
				•	Press the “Start/Pause” button	; the
Selecting or deselecting an option can be done
					programme will terminate automatically with the
at any time during the programme. The option
					final spin cycle for the present wash programme.
will be applied as long as the corresponding
				•	If you do not wish to spin the clothes, turn the
programme phase has not been executed yet.
					programme selector to the “Drain” programme
					and press the “Start/Pause” button	.
				“Spin speed reduction” button

• Reduces the predetermined automatic maximum spin speed to treat your laundry more gently.

PROGRAMME START

Turn on the tap and press the “Start/Pause” button . The lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. When the programme phase is finished, the corresponding indication goes off.

•Note: If there is a power interruption or if the appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the lid can be opened. As long as a wash programme is running, the lid remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Cleaning the Filter”).

PROGRAMME END

All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1.Turn the programme selector to the “Off/O” position.

2.Close the water tap.

3.Open lid and drum and unload the machine.

4.Leave the lid open for some time to allow the interior of the machine to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1.Press the “Start/Pause” button to pause the programme. The light flashes.

2.Select the new programme, any options and another spin speed if you want.

3.Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end. Press the “Reset” button for at least 3 seconds. Any existing water is drained out before the lid can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 312 10576