Quick guide
EN
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please
register your product on www . whirlpool . eu/ register
FIRST TIME USE
Wait at least two hours, after the installation, before connecting
the appliance to the power supply. Connect the appliance to the
power supply it starts the operation automatically. The ideal storage
temperatures for the food are preset in the factory.
CONTROL PANEL
1. 2. 3.
6. 5. 4.
ON/STANDBY
Press the
Stand-by mode, the icon will light up and the light in the refrigerator
compartment does not turn on.
To turn the product on again, a brief press on the button is sucient.
Note: this procedure does not disconnect the appliance from the
electricity supply.
TEMPERATURE DISPLAY
The display shows the refrigerator compartment temperature
(between 2°C and 7°C).
To avoid food waste, please refer to the recommended setting and storage
times found in the online user manual.
button for 3 seconds to turn the appliance o. In
Before using the appliance carefully read the Safety
Instruction.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti-odour lter in the fan as
demonstrated in the lter packaging (if available). If the audible signal
sounds, it means that the temperature alarm has intervened: press the
button to switch o the acoustic alarms.
1. On/Stand-by
2. Temperature display
3. Key lock
4. Turning o the sound alarm
5. Appliance temperature
6. Vacation (holiday mode)
APPLIANCE TEMPERATURE
It is possible to set a dierent temperature with the °C button.
Fast Freeze/Cool Function (Fast Cooling)
To quickly cool the refrigerator compartment, or six hours before
putting a large quantity of food to be frozen in the freezer
compartment (if there is one), turn on the “Fast Cooling” function by
pressing the button
When the function is turned on, the icon will be displayed. The
function turns o automatically after 6 hours, or manually by pressing
the button
Note: do not put foods that are to be frozen in contact with others that are
already frozen.
Recommended setting: - 18°C
for 3 seconds.
for 3 seconds.
KEY LOCK
The key lock can be activated/deactivated by keeping the
button ressed for 3 seconds, until a conrmation sound is heard (the
icon lights up immediatly and into few seconds disappear). If you press
any button while the key lock is active, you will hear a sound and the
icon will ash.
TURNING OFF THE SOUND ALARM
To turn o the sound alarm, briey press the
button.
VACATION HOLIDAY MODE
You can use this function in the event of your prolonged
absence.
Press the “Vacation”
The display will show the temperature of the refrigerator compartment
(12°C) and the
remove the food from the appliance and keep the door closed - the
appliance will maintain a suitable temperature to prevent odours from
forming.
To turn o the function, press briey the button or act on the °C button
.
button for 3 seconds to turn the function n.
icon will light up. After activating the function,
* Available only on certain models
HOW TO STORE FRESH FOOD AND BEVERAGES
** For models
with "0 ° ZONE"
COMPARTMENT
the "coolest
area" is the one
highlighted in
the legend
REFRIGERATOR COMPARTMENT
“0° Zone” compartment*
The “0°ZONE” compartment is specically designed to maintain a low
temperature and the correct humidity to preserve fresh food for longer
(for example, meat, sh, fruits and winter vegetables).
*
**
Legend
TEMPERATE ZONE
Suggested for storage of tropical fruit, cans, drink, eggs,
sauces, pickles, butter, jam
COOL ZONE
Suggested for storage of cheese, milk, daily food,
delicatessen, yoghurt
COOLEST AREA
Suggested for storage of cold cuts, desserts, meat and
sh
FRUIT & VEGETABLE DRAWER
Humidity control technology coupled with Active0 provides the best
food preservation when the food is not completely packed.
Turning on and turning o the compartment
The internal temperature of the compartment is approximately 0°
when the compartment is turned on.
To turn on the compartment, press the button (1) for more than one
second until the symbol (2) lights up. The lit symbol (2) means that the
compartment is working. Press the button (1) again for more than one
second to turn o the compartment. The temperature inside depends
on the general temperature of the refrigerator.
.
.
Removing the “0° zone“ compartment
Carry out the following steps:
1. To make it easier to remove the compartment, we recommend
that you empty (and possibly remove) the lower door shelves.
2. Remove the compartment by rotating it upwards.
3. Remove the white plastic shelf under the compartment.
Note: it is not possible to remove the upper shelf and side supports.
To use the “0° ZONE“ compartment again, carefully reposition the
white plastic shelf under the compartment before inserting the drawer
and turning the function back on.
For the correct functioning of the “0°ZONE” compartment, it is
necessary that:
• the appliance is turned on;
• the fridge temperature is between +2°C and +6°C;
• the “0°ZONE” compartment is turned on
• Vacation Mode and Stand by are not selected
Note:
- if the symbol does not light up when you turn on the compartment,
check that the drawer is properly inserted; if the problem persists
contact the authorised Technical Assistance Service;
- when the “0°ZONE” compartment is inserted in the appliance you
may hear a faint noise, which you should consider as normal;
Important: be careful when positioning food and containers that are
small in size on the upper shelf of the “0°ZONE“ compartment in order
to prevent them accidentally falling between the shelf and the back
wall of the refrigerator compartment.
To have a larger refrigerator volume and to reduce energy
consumption, it is recommended to remove the “0°ZONE“
compartment.
Clean the compartment and its components occasionally using a cloth
and a solution of warm water (taking care not to submerge the white
plastic shelf under the drawer) and neutral cleaning agents specically
for cleaning the inside of the refrigerator. Do not use abrasive cleaning
agents.
Before cleaning the compartment (also externally) it is necessary
to remove the drawer to disconnect the electrical supply.
Fan*
The Fan improves temperature distribution inside the product,
allowing better preservation of stored food and reduction of excess
humidity. The fan is switched on by default and can be activate/
deactivate manually. The fan operating mode is adjusted based
on product condition. You can turn the fan on/o by pressing the
“Vacation”
* Available only on certain models
and “Alarm” buttons at the same time for 3 seconds.
th
The lit 6
therefore the 6
temperature exceeds 27°C, or if drops of water are present on the
glass shelves, it is essential that the fan is on to ensure the proper
preservation of the food. Deactivation of the fan allows energy
consumption to be optimised.
Sense FreshControl symbol indicates that the fan is on and
th
Sense FreshControl function is on. If the ambient