Whirlpool AKM 176/WH, AKM 176/IX INSTRUCTION FOR USE

3gb66002.fm5 Page 1 Friday, October 19, 2001 12:16 PM

AKM 176 PRODUCT DESCRIPTION SHEET

Removable panstand grids

2-3.

Medium burners

Large burner

Small burner

Double crown burner

Medium burner control knob

Double crown control knob

10.

Large burner control knob

11.

Small burner control knob

Symbols

Operation of burners with safety device

and electric ignition

To light one of the burners:

 Press the relative knob and turn it anti-

clockwise to the large flame and star

setting .

 At the same time, keep the knob pressed

against the control panel until the burner

ignites.

 After the burner has ignited, keep the knob

pressed for about 10 seconds.

 Release the knob.

If the burner does not ignite, repeat the operations

described above.

Note:



Should particular local conditions of the

delivered gas make ignition of the burner

difficult, it is advisable to repeat the

operation with the knob turned to the small

flame setting .

Shaded

circle

Large

flame

and star

Small

flame



The safety device of the burner shuts off the

gas supply to the burner if its flame goes out

accidentally (because of a sudden gust of

wind, an interruption in the gas delivery, the

overflowing of liquids, etc.).



The separator panel, positioned beneath the

cooktop at a minimum distance of 20 mm,

must be sealed.

Tap closed

Maximum opening/delivery

and electric ignition

Minimum opening

or reduced delivery

USING THE DOUBLE-RING BURNER

When using the double-ring burner, leave the knob

on the maximum setting (large flame ) for at

least five minutes after lighting before selecting a

lower setting.

5019 319 66002 1101858

3gb66002.fm5 Page 2 Friday, October 19, 2001 12:16 PM

DIMENSIONS OF COOKING HOB AND WORKTOP (mm)

NOTE: The distance A between the wall cabinets must be a minimum of 900 mm. In case

of installation of a hood above the cooktop, please refer to the hood instructions

for the correct distance.

INJECTORS TABLE CATEGORY II2HS3B/P

Type of

gas used

NATURAL GAS

(Methane) G 20

NATURAL GAS

(Methane) G 25.1

LIQUID

PETROLEUM GAS

(Cylinder) G 30

LIQUID

PETROLEUM GAS

(Cylinder) G 31

Type of

gas used

Type of

burner

large

medium

small

double crown

large

medium

small

double crown

large

medium

small

double crown

large

medium

small

double crown

Appliance

model

122

132

129

139

Rated heat

capacity

Pcs-kW

3.00

1.65

1.00

3.30

3.00

1.65

1.00

3.30

3.00

1.65

1.00

3.30

3.00

1.65

1.00

3.30

Injector

marking

Total rated heat

capacity

Pcs-kW

Rated

consumption

286 l/h

157 l/h

95 l/h

314 l/h

332 l/h

183 l/h

111 l/h

365 l/h

218 g/h

120 g/h

73 g/h

240 g/h

214 g/h

118 g/h

71 g/h

236 g/h

Total rated

consumption

Reduced

heat

capacity

Pcs-kW

0.60

0.35

0.30

1.50

0.60

0.35

0.30

1.50

0.60

0.35

0.30

1.50

0.60

0.35

0.30

1.50

G 20 25 mbar 5 gas 10.6 1009 l/h 21.2

G 30 30 mbar 5 gas 10.6 771 g/h 21.2

G 31 37 mbar 5 gas 10.6 757 g/h 21.2

G 25.1 25 mbar 5 gas 10.6 1174 g/h 21.2

Gas pressure

min. rat. max.

20 25 33

24 30 36.5

25 37 45

Air required for

burning