Whirlpool ADG 9556/1 INSTRUCTION FOR USE
How to use the appliance
Further indications are given in the single chapters and in the user instructions.
Open the door,
switch on the appliance
How to fill the
detergent dispenser
Check the rinse aid level
Check the regeneration
salt level
Load the racks
Select a programme
Select options
Press the ON button.
Large compartment A:
With each wash cycle.
Small compartment B:
For programmes with pre-wash only.
Mechanical indicator C.
Electric indicator on control panel (if provided).
On models with water softener system only .
Mechanical indi cator D. Electri c indi cator
on control panel (if provided).
Refer to the dishwasher loading instructions.
The last programme selected will light up.
Press the button until the desired programme lights up.
If necessary (and if provided)
the corresponding indicator lamp lights up.
ABC
Press the Start button
Turn on the water tap
close the dishwasher door
Wa sh cycle
Switch off the appliance
Turn off the water tap,
unload the racks
The selected progr amme is then
memorised (even in th e event
of power fai lur e).
At the end of the progr amme an acoustic sign al will sound.
Only after the ST ART button has switched o ff: press th e OFF button.
All the indi cator lamps switch off.
Warning: when the door is opened steam comes out!
Unload the appliance, starting from the lower rack.
“Change progra mme”
Press the START button for 2 sec. until
the Start indicator lamp switches off;
Select another programme and press
the START button again.
- Only open the dishwasher if necessary
(Warning: beware of hot steam).
- If the appliance is switched o ff d urin g a
wash cycle, when switched on again it
will resume the cycle from where it was
interrupted.
WH/II/FD/GB
Dishwasher loading instructions and racks provided
Upper rack:
Multi-purpose support (A):
Depending on the position, f or lon ghandles utensils, cups and glasses . M ay
be used in three different position s.
Crockery holders (B):
Depending on the positi on, for ex ample
plates, cups and long-stemm ed gl asses .
Revolving glass support (C):
Depending on the positi on, for ex ample
small or long-stemmed glasses .
Long-handled utensils (e.g. carving
forks, knives) must be arranged
with the sharp end facing in
towards the appliance
Half Load:
Load the upper rack
Place the cutlery basket (D) in the
upper rack.
only
Rack height adjustment
(also when loaded):
Lower adjustment:
•
two
rack handles outwards (E)
and lower the rack.
Upper adjustment:
•
handles (E) upwards until the rack
clicks into place (Factory setting).
The rack must be level on both
sides.
Removing the top rack to provide
clearance for large items of
crockery in the bottom rack:
Open the rack guide r etainers (F) on the
right and left an d r em ove th e t op r ack.
When the upper rack is in place the
retainers must always be closed.
1)
2)
.
.
pull out the
two
pull the
depending on the model
Retainer
closed
F
Retainer
F
open
Lower rack:
Depending on the m odel with fix ed or
tilting plate holders (G).
Half Load:
Load the lower rack
Greater washing power, particularly
for plates and saucepans.
Cutlery basket (J) or (H):
Some models are provided w ith a gri d
(I) that can be fitted onto the cutlery
basket to keep items separated.
Cutlery basket (D) for appliances wi th
half load only.
Sharp knives and forks that might
cause injury must be placed in the
cutlery basket with the sharp end
facing downwards.
Only use dishwasher-proof crockery and dishes . Do not use the appliance f or items not suitable for w ashing in a dishwasher ,
for example wooden items , aluminium, plastic utensils, tin, hand-decorated crockery (unglazed), silver cutlery .
Spare parts which are sold separately:
1)
Multi-purpose support (A) - N. AMH 369 series.
2)
Revolving glass support (C) - N. WGH 1000 series.
only
.
Loading...