Wharfedale Pro Q-230 Operating Manual

OPERATING MANUAL AND USER GUIDE
Q Series Equalizers
Q Series Equalizers
Q Series Q130 / Q215 / Q230
www.wharfedalepro.com
OPERATING MANUAL AND USER GUIDE
1. READ ALL INSTRUCTIONS carefully and become familiar with the features and functions of these
products before operating them.
2. RETAIN THESE INSTRUCTIONS for future reference.
3. COMPLY WITH ALL WARNINGS – All warnings and instructions for this product should be adhered to.
4. USE WITH AMPLIFIERS – In order to avoid damage to drivers and other equipment, it is advisable to
establish and follow a routine for powering up and powering down a sound system. With all system
components connected, turn on source equipment (mixers, signal processors, record and playback
units, etc.) BEFORE powering up amplifiers. Transient voltages from powering up source equipment
can damage speakers if amplifiers are already turned on. Make sure that amplifier volumes are
set to their minimum settings and power up any system amplifiers LAST. It is recommended that
all system components be allowed to stabilize for several seconds before any source signals are
introduced or level setting adjustments are made. Similarly, when shutting systems down, turn all
amplifiers off first, before powering down any other system components.
5. CABLES – Do not use shielded or microphone cables for connection between amplifiers and speakers.
Use only approved speaker cables with proper connectors.
6. MAINS SUPPLY AND SAFETY – The main operating voltage of Wharfedale electronics is shown on the
rear panel of the device. If it does not match the voltage in your area, contact your dealer.
7. CAUTION – Professional sound reinforcement systems are capable of generating very high sound
pressure levels and use high voltage. Use care with placement and operation to avoid exposure to
excessive volume levels, water or moisture.
8. SERVICE – There are no user serviceable parts inside this product. Users should not attempt to service
this product. Warranty nullification could result if this is attempted.
1
Q
Series
1. Important Warnings & Safety Instructions……………………………....…….…1
2. What about the Q Series Equalizers?………………………………....….….......3
3. Introduction/Overview…………………………….……….................................4
4. Features……………………….…………………………………….……………........5
5. Setting up/ Connections/ Wiring……………………………………...................7
6. Specifications…………………………………….………………………….……….11
7. Dimensional Drawings……………………………………................................12
8. Warranty…………………………..……....…………………………..……............12
TABLE OF CONTENTS
2
OPERATING MANUAL AND USER GUIDE
The Q Series consists of three models: Q130 is a high quality, constant Q, 1/3 octave,
Graphic Equalizer; The Q215 is a high quality constant Q, 2/3 Octave Equalizer and the
Q230, dual channel, constant Q, 1/3 Octave Equalizer. They are designed to provide
transparent and accurate frequency shaping capability in an easy to use package.
The separate frequency bands, ranging from 25 Hz to 20kHz allow you to “tune” the sound
system to the room to create the best sounding system. Using long throw faders makes fine
adjustments of each band easy and accurate. Other features include a by-pass switch to
allow you to compare the equalized sound from the unfiltered sound, thereby allowing you
to fine tune the system.
The Q Series uses balanced and unbalanced Input/Output connectors to allow you to use
it in a variety of applications. The rack-mountable chassis allows you to quickly install the
units into an equipment rack or your audio cabinet.
WHAT ABOUT THE Q Series Equalizers?
3
Q
Series
Wharfedale Q Series Equalizers are the result of many years of experience in the use,
design and manufacturing of professional sound reinforcement products. We take great
pride in engineering and building every Wharfedale Pro product and wish to thank you for
entrusting us with your sound.
From the time Gilbert Briggs built his first loudspeaker in 1932, to the present, Wharfedale
Professional products have maintained the same standard of quality in components,
workmanship and performance.
Please take a few minutes to read this manual completely in order to ensure that you get
the most out of your equalizers.
Q SERIES EQUALIZER OVERVIEW:
The Q Series Equalizers are accurate, high quality, Constant Q graphic equalizers. This
allows you to tailor your sound to make it sound the best in a room or tailor the sound of
your music. With low distortion and flexible features, these equalizers are the right tools to
bring to the show.
The Q Series has many user-friendly features. These easy to adjust and use features include,
long travel slide faders (Q-130), by-pass switch, soft limit switch, variable high pass filter
control and easy to read LED meters.
INTRODUCTION
4
Loading...
+ 9 hidden pages