ATTENTION!
If any components of this unit are broken, do not operate properly, or for product returns, please contact Weston Products LLC
Phone: 1-800-814-4895 (Outside the U.S. 440-638-3131)
20365 Progress Drive, Strongsville, Ohio 44149
WestonProducts.com
All Trademarks and Registered Trademarks are property of the respective companies.
SAVE THESE INSTRUCTIONS!
Refer to them often and use them to instruct others.
FOOD
DEHYDRATOR
6 TRAY MODEL NO. 75-0301-W
10 TRAY MODEL NO. 75-0201-W
REV102710
Control
Panel
Power
Cord
3
Control Panel
Drying
Guide
Dehydrator
Cabinet
2
On/Off
Power
Switch
1
2
-2-
WESTON WARRANTY INFORMATION
SAVE THIS WARRANTY INFORMATION FOR YOUR RECORDS!
Weston Products LLC warrants to the ORIGINAL RETAIL PURCHASER of this product that if operated in accordance with the printed instruction accompanying it, then for a period of 1 year from the date of purchase, the product shall be free from defects in material and workmanship.
The Warranty Card, along with a copy of the original receipt, must be received by Weston Products LLC within 30 days from purchase date for the warranty to apply. Failure to send the completely filled out Warranty Card, along with a copy of the original receipt, will void the warranty.
TheproductmustbedeliveredtoorshippedfreightprepaidtoWestonProductsLLCforwarrantyservices, in either its original packaging or similar packaging affording an equal degree of protection. Damage due to shipping is not the responsibility of the company. Weston Products LLC charges a $35.00 per hour bench charge. NOTE: No repairs will be started without the authorization of the customer. The return shipping cost to the customer will be added to the repair invoice.
Weston Products LLC will repair (or at its discretion, replace) the product free of charge, if in the judgment of the company, it has been proven to be defective as to seller’s labor and material, within the warranty period.
New or rebuilt replacements for factory defective parts will be supplied for one (1) year from the date of purchase. Replacement parts are warranted for the remainder of the original warranty period.
For non-warranty repairs, contact Weston Products LLC’s Customer Service at 1-800-814-4895 M-F 8am-5pm EST (outside of the United States 440-638-3131) to obtain a Return Merchandise Authorization Number (RMA Number). Weston Products LLC will refuse all returns that do not contain this number. DO
NOT RETURN THE UNIT WITHOUT PROPER AUTHORIZATION FROM WESTON PRODUCTS LLC. LIMITATIONS: The warranty is void if the product is used for any purpose other than that for which it is
designed. The product must not have been previously altered, repaired, or serviced by anyone else other than Weston Products LLC. If applicable, the serial number must not have been altered or removed. The product must not have been subjected to accident in transit or while in the customer’s possession, misused, abused, or operated contrary to the instructions contained in the instruction manual. This includes failure caused by neglect of reasonable and necessary maintenance, improper line voltage and acts of nature. This warranty is not transferable and applies only to U.S. and Canadian sales.
Except to the extent prohibited by applicable law, no other warranties whether expressed or implied, including warranty merchantability and fitness for a particular purpose, shall apply to this product. Under no circumstances shall Weston Products LLC be liable for consequential damages sustained in connection with said product and Weston Products LLC neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than such as is expressly set forth herein. Any applicable implied warranties are also limited to the one (1) year period of the limited warranty.
This warranty covers only the product and its specific parts, not the food or other products processed in it.
CUT ALONG THE DOTTED LINE AND SEND THE WARRANTY CARD ALONG WITH A COPY OF YOUR ORIGINAL PURCHASE RECEIPT TO: Weston Products LLC
20365 Progress Drive, Strongsville, OH 44149
WESTON WARRANTY CARD
SEND THIS CARD ALONG WITH A COPY OF YOUR ORIGINAL PURCHASE RECEIPT TO: WESTON WARRANTY, WESTON PRODUCTS LLC, 20365 PROGRESS DRIVE, STRONGSVILLE, OH 44149
Customer Name: _________________________________
Address: _______________________________________
City/State/Zip: ___________________________________
Telephone Number: (_________) ____________________
E-Mail Address: _________________________________
Original Date of Purchase: ______/________/________
Product Model #: _________________________________
Serial # (if applicable): ______________________
-15-
YOGURT
1 quart milk |
1/2 cup Powdered Milk |
|
2 Tbsp Plain Yogurt (or 2-3 Tbsp of yogurt starter) |
||
Fruits & Sweeteners |
|
|
. |
In a saucepan mix milk, powdered milk together, heat to scalding. |
|
. |
Remove from heat and let cool to 110°F (43oC). |
|
. |
Mix the yogurt well with the cooled scaled milk (if using yogurt starter, add to 1/3 cup scaled |
|
. |
milk and mix well, then return to the remaining milk). |
|
Set the dehydrator to 108°F (42oC) NOTE: If the temperature is too high the yogurt will curdle. |
||
. |
If the temperature is too low, the yogurt will take longer to thicken. |
|
Pour the milk yogurt mixture into flat containers and cover with plastic wrap. |
||
. |
Place the flat containers in the dehydrator for 2-4 hours or until thickened. |
|
. |
Remove the yogurt from the dehydrator and allow to cool. |
|
. |
Stir in the flavorings or fruits to taste. |
PROBLEM SOLVING
MOISTURE IN THE CONTAINER
CAUSE: Incomplete Drying. Food cut unevenly, thus incomplete drying. Dried foods left at room temperature too long after cooling, moisture has re-entered the foods.
PREVENTION: Test food for dryness before removing from the dehydrator. Cut foods evenly. Cool quickly and package immediately.
__________________________________________________________________
MOLD ON FOOD
CAUSE: Incomplete drying. Food not checked for moisture content within a week. Storage container not air-tight. Storage temperature too warm/moisture in food. Case hardening may have occurred, meaning the food was dried at too high of a temperature and food was dried on the outside but not completed dried on the inside.
PREVENTION: Test several food pieces for dryness. Check the storage container within 1 week for moisture, then re-dry food if needed. Use air-tight containers for storage. Store foods in cool areas that are 70°F (21oC) or below. Dry foods at appropriate temperatures/use the Drying Guide for reference.
__________________________________________________________________
BROWN SPOTS ON VEGETABLES
CAUSE: Too high of drying temperature used. Vegetables were over-dried.
PREVENTION: Dry foods at appropriate temperatures/use the Drying Guide for reference. Check foods often for dryness.
__________________________________________________________________
FOOD STICKING TO THE TRAYS
CAUSE: Food not being turned over.
PREVENTION: After one hour of dehydrating, use a spatula and flip the foods.
COMPONENT LIST
DIAGRAM |
PART |
PART |
NUMBER |
DESCRIPTION |
NUMBER |
1 |
Temperature Control Knob |
75-0102 |
2 |
Dehydrator Tray |
75-0103-N |
3 |
Feet (4) |
75-0104 |
If any components of this unit are broken or the unit does not operate properly, call Weston Products LLC Toll Free at
1-800-814-4895
Monday thru Friday 8:00am-5:00pm EST. Outside the U.S. call 440-638-3131
ADDITIONAL ACCESSORIES AVAILABLE
ITEM |
PART |
DESCRIPTION |
NUMBER |
The Original Jerky Gun |
37-0101-W |
Stainless Steel Mandoline Slicer |
01-0006 |
Dehydrator Netting Roll 13.5” x 5.3” |
78-0201-W |
These products and many more products can be ordered by visiting |
|
W e s t o n P r o d u c t s . c o m |
or by calling |
Weston Products LLC Toll Free at 1-800-814-4895 |
|
Monday thru Friday 8:00am-5:00pm EST. Outside the U.S. call 440-638-3131 |
-14- |
-3- |