Westinghouse WC34DX9019 User Manual
WC27PX9019
WC32PX9019
WC34DX9019
1
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS
INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lighting” indicates unin-
sulated material within your unit may
cause an electrical shock.For the safety of
everyone in your household, please do not
The “exclamation point” calls atten-
tion to features for which you should
read the enclosed literature closely to pre-
vent operating and maintenance problems.
remove product covering.
WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to
rain or moisture and objects filled with liquids, such as vases, should not be placed on this
apparatus.
2
I.Safety Prevention Measures
Please always place
this device on a stable
surface; otherwise,
it may fall and be
damaged.
When cleaning the
device, be sure to
remove the power
plug, use a piece
of soft cloth rather
t ha n i nd u st ri a l
chemical to clean
the device, be sure
not to let water enter
the device.
The altitude and the
tropical environment
the adapter fits depend
on which adapter is
used for the device.
The rating plate on
the back of the device
with the above warning
sign indicates that
t hi s pr o du c t i s
applicable for the
safe use of the region
with a lt it ud e o f
2,000m and below.
Do not disassemble
this device without
permission. In case
of failure, be sure to
contact a professional
servicing person to fix
it. The unauthorized
disassembly of this
device may result
in electric shock or
fire.
Do not hold the plug
w it h we t ha n d;
otherwise, electric
shock may occur.
Make sure the plug
has a good touch
because poor touch
may cause fire.
In case of rare smell
or noise out of this
device, be sure to
immediately cut off
the power supply and
ask a professional
servicing person to
fix the problem.
Do not use a broken
power plug nor keep
a power cord near heat
source; otherwise,
electr ic s hock or
fire may occur.
When this device
is idle for long time,
be sure to power it
off; otherwise, electric
shock or fire may
occur.
Note:
The device with AC switch may use such AC switch as cut-off component.
The device without AC switch may use power plug or coupler as cut-off component.
In case of the normal use of the equipment, make sure the cut-off component
can be accessed easily.
3
All s pecifi catio ns and in format ions ar e subje ct to cha nge wit hout no tice.
Loading...