Westinghouse PHN744DU, PHN944DU User Manual

user manual

Induction Hob

PHN644DU
PHN744DU
PHN944DU

2 westinghouse

Electrolux. Thinking of you.

Westinghouse. We are part of the Electrolux family.

Share more of our thinking at www.electrolux.com

CONTENTS

Safety information 2
Installation instructions 4
Product description 6
Operating instructions 8
Helpful hints and tips 10

SAFETY INFORMATION

Before the installation and use of the appli­ance, carefully read the supplied instruc­tions. The manufacturer is not responsible if
an incorrect installation and use causes in­juries and damages. Always keep the in­structions with the appliance for future ref­erence.

CHILDREN AND VULNERABLE
PEOPLE SAFETY

Warning! Risk of suffocation, injury or

permanent disability.

• Do not let persons, children included,
with reduced physical sensory, reduced
mental functions or lack of experience
and knowledge use the appliance. They
must have supervision or instruction for
the operation of the appliance by a per­son who is responsible for their safety.

• Do not let children play with the appli­ance.

• Keep all packaging away from children.

• Keep children and pets away from the
appliance when it operates or when it
cools down. Accessible parts are hot.

• If the appliance has a child safety device,
we recommend that you activate it.

Care and cleaning 11
What to do if… 12
Environment concerns 13
Warranty 13

Subject to change without notice.

• Obey the installation instruction supplied
with the appliance.

• Keep the minimum distance from the
other appliances and units.

• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.

• Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.

• Protect the bottom of the appliance from
steam and moisture.

• Do not install the appliance adjacent to a
door or under a window. This prevents
hot cookware to fall from the appliance
when the door or the window is opened.

• If the appliance is installed above drawers
make sure that the space, between the
bottom of the appliance and the upper
drawer, is sufficient for air circulation.

• Make sure that the ventilation space of 5
mm, between the worktop and the front
of the below unit, is free. The warranty
does not cover damages caused by the
lack of an adequate ventilation space.

• The bottom of the appliance can get hot.
We recommend to install a non-combus­tile separation panel under the appliance
to prevent access to the bottom.

INSTALLATION

Warning! Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged appli­ance.

Electrical connection

Warning! Risk of fire and electrical

shock.

• All electrical connections must be made
by a qualified electrician.

• Before wiring make sure the mains termi­nal is not live.

westinghouse 3

• Make sure the appliance is installed cor­rectly. Loose and incorrect plug and
socket connections can make the termi­nal become too hot.

• The appliance must be installed correctly
to ensure anti-shock protection.

• Cables from other electrical appliances
must not touch the hot surface of the ap­pliance.

• Do not let the electricity bonds tangle.

• Use a strain relief clamp on cable.

• Use the correct mains cable.

• Make sure there is no damage to the
mains plug and to the mains cable. Con­tact the Service or an electrician to
change a damaged mains cable.

• The electrical installation must have an
isolation device which lets you discon­nect the appliance from the mains at all
poles. The isolation device must have a
contact opening width of minimum 3
mm.

• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.

USE

Warning! Risk of injury, burns or

electric shock.

• Use this appliance in a household envi­ronment.

• Do not change the specification of this
appliance.

• Do not use an external timer or a sepa­rate remote-control system to operate
the appliance.

• Do not let the appliance stay unattended
during operation.

• Do not operate the appliance with wet
hands or when it has contact with water.

• Do not put cutlery or saucepan lids on
the cooking zones. They can become
hot.

• Set the cooking zone to “off” after each
use. Do not rely on the pan detector.

• Do not use the appliance as a work sur­face or as a storage surface.

• If there is a crack on the surface, discon­nect power supply to prevent the electri­cal shock.

• Users with a pacemaker must keep a
distance of minimum 30 cm from the in­duction cooking zones when the appli­ance is in operation.

Warning! Risk of fire or explosion.

• Fats and oil when heated can release
flammable vapours. Keep flames or heat­ed objects away from fats and oils when
you cook with them.

• The vapours that very hot oil releases can
cause spontaneous combustion.

• Used oil, that can contain food remnants,
can cause fire at a lower temperature
than oil used for the first time.

• Do not put flammable products or items
that are wet with flammable products in,
near or on the appliance.

• Do not try to extinguish a fire with water.
Disconnect the appliance and cover the
flame with a lid or a fire blanket.

Warning! Risk of damage to the
appliance.

• Do not keep hot cookware on the control
panel.

• Do not let cookware to boil dry.

• Be careful not let objects or cookware fall
on the appliance. The surface can be
damaged.

• Do not activate the cooking zones with
empty cookware or without cookware.

• Do not put aluminium foil on the appli­ance.

• Cookware made of cast iron, aluminium
or with a damaged bottom can cause
scratches on the glass ceramic. Always
lift these objects up when you have to
move them on the cooking surface.

CARE AND CLEANING

Warning! Risk of damage to the

appliance.

• Clean regularly the appliance to prevent
the deterioration of the surface material.

• Do not use water spray and steam to
clean the appliance.

• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.

4 westinghouse

INSTALLATION INSTRUCTIONS

Warning! Refer to "Safety information"
chapter.

Before the installation, note down
the serial number (Ser. Nr.) from the
rating plate. The rating plate of the

appliance is on its lower casing.

Made in China Model: PHN644DU

AU APP NO.: S/91
S NO.: 50Hz 7.4 KW

Made in China Model: PHN944DU

AU APP NO.: S/91
S NO.: 50Hz 7.4 KW

Made in China Model: PHN744DU

AU APP NO.: S/91
S NO.: 50Hz 7.4 KW

PNC: 949163124

APP NO.: 55GADD5AU

PNC: 949163193

APP NO.: 55GCDD5AU

PNC: 949163199

APP NO.: 55GADD5AU

220 - 240 V AC

~ 220 - 240 V

220 - 240 V AC

~ 220 - 240 V

220 - 240 V AC

~ 220 - 240 V

BUILT-IN APPLIANCES

• Only use the built-in appliances after you
assemble the appliance into correct built­in units and work surfaces that align to
the standards.

CONNECTION CABLE

• Use the correct mains cable of type
H05BB-F Tmax 90°C (or higher) for a sin­gle phase or two phase connection.

• Replace the damaged mains cable with a
special cable (type H05BB-F Tmax 90°C
or higher). Speak to your local Service
Centre.

TO ATTACH THE SEAL.

• Clean the worktop in the area of the cut
out section.

• Bond the seal stripe supplied on the low­er edge of the appliance along the outer
edge of the glass ceramic. Do not extend
it. Let stay the cut ends in the middle of
one side. When, you cut it to length (add
some mm), push the two ends together.

ASSEMBLY

min.
50mm

min.
500mm

min.
50mm

min.
5mm

westinghouse 5

PHN644DU/PHN744DU

R 5mm

=

490

+1

mm

560

=

1

2

PHN944DU

=

R 5mm

490

600mm

+1

mm

880

+1

mm

=

600mm

+1

mm

min.
25 mm

min.

min.

5 mm

20 mm