¨
USERÕS MANUAL
Patent Pending
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
Model No. WLEL45070
Serial No.
Serial
Number
Decal
QUESTIONS?
If you have questions, or if there
are missing or damaged parts,
please call direct to our toll-free
Customer Hot Line. The trained
technicians on our Customer Hot
Line will provide immediate
assistance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
2
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO USE THE WESLO¨ECLIPSE II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
1. Read all instructions in this manual before
using the ECLIPSE II.
2. It is the responsibility of the owner to
ensure that all users of the ECLIPSE II are
adequately informed of all precautions.
3. Place the ECLIPSE II on a level surface, with
a mat beneath it to protect the floor or
carpet. Keep the ECLIPSE II indoors, away
from moisture and dust.
4. Inspect and tighten all parts regularly.
Replace any worn parts immediately.
5. Keep children under the age of 12 and pets
away from the ECLIPSE II at all times.
6. The ECLIPSE II should not be used by
persons weighing more than 250 pounds.
7. Wear appropriate exercise clothing when
using the ECLIPSE II. Always wear athletic
shoes for foot protection.
8. Always hold the handlebars when mounting,
dismounting, and using the ECLIPSE II. Step
onto and off the pedal that is in the lowest
position when mounting and dismounting.
9. When you stop exercising, allow the pedals
to slowly come to a stop.
10. Keep your back straight when using the
ECLIPSE II. Do not arch your back.
11. If you feel pain or dizziness while exercising, stop immediately and begin cooling
down.
12. The ECLIPSE II is intended for in-home use
only. Do not use it in any commercial, rental,
or institutional setting.
13. The decal shown below is found on the
ECLIPSE II. If the decal is missing, or if it is
not legible, call toll-free 1-800-999-3756 to
order a free replacement decal. Apply the
decal in the location shown.
WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read
all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read the following important precautions before
using the WESLO¨ECLIPSE II.
3
BEFORE YOU BEGIN
Congratulations for selecting the revolutionary
WESLO¨ECLIPSE II elliptical exerciser. The
ECLIPSE II is an incredibly smooth exerciser that
moves your feet in a natural elliptical path, minimizing
the impact on your knees and ankles. And the unique
ECLIPSE II features adjustable resistance and motivational electronics to help you get the most from your
exercise. Welcome to a whole new world of natural,
elliptical-motion exercise from WESLO.
For your benefit, read this manual carefully before
you use the ECLIPSE II. If you have additional ques-
tions, please call our Customer Service Department
toll-free at 1-800-999-3756, Monday through Friday, 6
a.m. until 6 p.m. Mountain Time (excluding holidays).
To help us assist you, please note the product model
number and serial number before calling. The model
number is WLEL45070. The serial number can be
found on a decal attached to the ECLIPSE II (see the
front cover of this manual for the location of the decal).
Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled.
Resistance Knob
Upright
FRONT
BACK
RIGHT SIDE
Pedal
Handlebar
Lock Pin
Extension Tube
Side Shield
Pedal Leg
Base
Console
Water Bottle Holder
(Bottle is not included)
4
PART IDENTIFICATION CHART
Use the chart below to identify the small parts used in
assembly. The number in parenthesis below each part
is the key number of the part, from the PART LIST on
page 14. The number after the dash indicates the
quantity needed for assembly.
3/8" Nylon Locknut (54)Ñ4
5/8Ó Axle Cap (45)Ñ2
#8 x 3/4" Tec Screw (42)Ñ1*
Handlebar Bushing (40)Ñ4*
1/2" Nylon Jam Nut (9)Ñ2
Crank Spacer (41)Ñ2
Pedal Bolt (8)Ñ2
Pedal Leg Bushing (39)Ñ4*
Handlebar Spacer (46)Ñ2
*Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has
been pre-attached.
5
2. Identify the Left Handlebar (6) and the left Extension
Tube (5) (there are stickers on the Handlebars and
Extension Tubes for identification). Make sure that
there is a Tree Fastener (63) in the Extension Tube.
If there is not, insert a Tree Fastener as shown.
Slide the Left Handlebar (6) onto the left Extension
Tube (5), being careful not to damage the Tree
Fastener (63). Align one of the three holes in the
Left Handlebar with the hole in the Extension Tube
and insert a Lock Pin (37) into the holes. Turn the
Lock Pin to the position shown in drawing 2a.
Repeat this step to attach the Right Handlebar to the
right Extension Tube (not shown).
ASSEMBLY
Assembly requires two persons. Place all parts of the WESLO¨ECLIPSE II in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included grease packet, a phillips screwdriver , two adjustable
wrenches , and a rubber mallet .
2
6
37
63
5
37
2a
6
1. Remove the #8 x 3/4Ó Tec Screw (42) from the Cable
Cover (53). While another person holds the Upright
(2) near the Base (1), carefully pull the Resistance
Cable (33) up through the Upright until there is no
slack between the Upright and the Base.
Next, insert the Extension Wire (49) into the Base (1)
until there is no slack between the Upright and the
Base.
Slide the Upright (2) onto the welded bolts on the
Base (1). Be careful to avoid pinching the
Extension Wire (49) and the Resistance Cable
(33). Tighten a 3/8Ó Nylon Locknut (54) onto each
welded bolt.
Insert the upper end of the Resistance Cable (33)
into the Upright (2) as shown. Insert the tab on the
Cable Cover (53) into the slot in the Upright. Attach
the Cable Cover to the Upright with the #8 x 3/4Ó Tec
Screw (42).
1
54
49
2
1
33
33
53
Slot
42
6
5. The Console (52) requires two ÒAAÓ batteries (not
included). Alkaline batteries are recommended.
To install batteries, first slide up the Battery Cover (60)
and carefully remove the battery clip from the Console
(52). Insert two batteries into the battery clip as shown.
Make sure that the negative ends of the batteries
(marked ÒÐÓ) are touching the springs in the
battery clip. Replace the battery clip and close the
Battery Cover.
5
60
52
Battery
Clip
Batteries
4. Make sure that there are two Pedal Leg Bushings
(39) in the left Pedal Leg (3). Apply a small amount
of grease to a Pedal Bolt (8). Insert the Pedal Bolt
into the left Pedal Leg and slide a Crank Spacer (41)
onto the Pedal Bolt. Tighten the Pedal Bolt into the
left Crank Arm (10), but do not overtighten it. You
should be able to turn the Crank Spacer with some
effort. Tighten a 1/2Ó Nylon Jam Nut (9) onto the
Pedal Bolt.
Repeat this step to attach the right Pedal Leg (not
shown).
39
8
10
3
9
41
4
6. Make sure that all parts of the ECLIPSE II are properly tightened. To protect the floor or carpet from
damage, place a mat under the ECLIPSE II.
3
40
45
46
6
2
3. Slide a Handlebar Spacer (46) onto the left axle on
the Upright (2). Make sure that the open side of the
Handlebar Spacer is facing the Upright. Next, make
sure that there are two Handlebar Bushings (40) in
the Left Handlebar (6). Slide the Left Handlebar onto
the left axle on the Upright. Tap a 5/8Ó Axle Cap (45)
onto the axle.
Repeat this step to attach the Right Handlebar (not
shown).
7
HOW TO USE THE WESLO¨ECLIPSE II
HOW TO EXERCISE ON THE WESLO¨ECLIPSE II
To mount the ECLIPSE II, hold the handlebars and
step onto the pedal that is in the lowest position.
Next, step onto the other pedal. Push the pedals until
they begin to move with a continuous motion. Note:
The crank can turn in either direction; it is recommended that you turn the crank in the direction
shown below; however, to give variety to your
exercise, you may choose to turn the crank in the
opposite direction.
To dismount the ECLIPSE II, allow the pedals to
slowly come to a stop. CAUTION: The ECLIPSE II
does not have a freewheel; the pedals will continue to move until the flywheel stops. When the
pedals are stationary, step off the highest pedal first.
Then, step off the lowest pedal.
HOW TO ADJUST THE RESISTANCE OF THE
PEDALS
As you exercise,
you can adjust
the resistance of
the pedals with
the resistance
knob mounted on
the upright. To
increase the
resistance, turn
the knob
clockwise; to
decrease the
resistance, turn
the knob counterclockwise.
HOW TO ADJUST THE HANDLEBARS
To further add variety to your exercise, the handlebars
and extension tubes can be adjusted to any of three
positions.
Hold the right pedal leg. Remove the lock pin from the
right handlebar. Slide the extension tube up or down
until the hole in the extension tube is aligned with a
different hole in the handlebar. (Note: As you slide the
extension tube, be careful not to damage the tree
fastener [see assembly step 2].) Reinsert the lock pin
into the handlebar and the extension tube. Turn the
lock pin to the position shown in the inset drawing.
Next, adjust the position of the left handlebar and
extension tube. Make sure that the lock pins are in
the same holes in both handlebars. CAUTION: If the
lock pins are not turned to the position shown in
the inset drawing above, the lock pins could slip
out during use, resulting in injury to the user.
Pedal
Crank
Resistance Knob
Handlebar
Extension
Tube
Pedal Leg
Lock Pin
Holes
Lock
Pin
DIAGRAM OF THE CONSOLE
Note: If there is a thin sheet of clear plastic
on the face of the console, remove it.
DESCRIPTION OF THE CONSOLE
The innovative console offers a manual mode and
three pacer programs. The pacer programs are
designed to help you achieve your exercise goals by
pacing your exercise. The programs include a staminabuilding Interval program, an Aerobic program, and a
Fat Burn program. The console also features six monitor modes that provide continuous exercise feedback.
HOW THE PACER PROGRAMS OPERATE
When you use a
pacer program,
two columns of
bars will appear in
the display. The
left column will
show a target
pace; the right
column will show
your actual pace.
The target pace will change periodically during the
program; as the target pace changes, simply adjust
your pace to keep both columns at the same height.
Important: The target pace is a goal pace. Your
actual pace may be slower than the target pace,
especially during the first few months of your
exercise program. Be sure to exercise at a pace
that is comfortable for you.
The graphs on the left side of the console show how
the target pace will change during each program (see
the drawing above). Each graph is divided into ten
columns, and each column represents a two-minute
time period. The bars in each column show what the
target pace will be during that two-minute period. For
example, in the first column of the Interval graph, there
is one bar. This shows that during the first two minutes
of the Interval program, the target pace will be 40
repetitions (strides) per minute (see the scale at the
right end of the graph). In the second column, there
are five bars. This shows that during the second twominute period, the target pace will be 80 strides per
minute. Each pacer program is twenty minutes long.
DESCRIPTION OF THE MONITOR MODES
The six monitor modes provide continuous exercise
feedback. The modes are described below.
¥ Reps per minute (REPS/MIN)ÑThis mode shows
your pace, in repetitions (strides) per minute.
¥ TimeÑIf you select one of the three pacer programs,
this mode will count down the time remaining in the
program. If you select the manual mode, this mode
will count up the length of time you have exercised.
Note: If you stop exercising for ten seconds or
longer, the time mode will pause.
Target Pace Actual Pace
8
9
¥ DistanceÑThis mode shows the total number of
repetitions (strides) you have completed, up to 999.
The display will then reset to zero and continue
counting.
¥ Fat calories (FAT CALS)ÑThis mode shows the
approximate number of fat calories you have
burned. (See BURNING FAT on page 12 for an
explanation of fat calories.)
¥ Calories (CALS)ÑThis mode shows the approxi-
mate number of calories you have burned. (This
number includes both fat calories and carbohydrate
calories.)
¥ ScanÑThis mode displays the calories, fat calories,
reps per minute, time, and distance modes, for five
seconds each, in a repeating cycle.
STEP-BY-STEP CONSOLE OPERATION
Before the console can be operated, two ÒAAÓ batteries must be installed. (See assembly step 5 on
page 6 for installation instructions.) Follow the steps
below to operate the console.
Turn on the power
To turn on the
power, press the
on/reset button
or simply begin
exercising on the
ECLIPSE II.
When the power is turned on, the entire display
will appear for two seconds. The console will then
be ready for use. Note: If batteries were just
installed, the power will already be on.
Select one of the three pacer programs or the
manual mode
To select one of
the pacer
programs,
repeatedly press
the program button. The program
indicator will
show which
program you
have selected. To
select the manual mode, press the program
button until the program indicator disappears.
The programs will be selected in the following
order: program 1 (Interval), program 2 (Aerobic),
program 3 (Fat Burn), and the manual mode.
Begin your workout
If you selected
the manual
mode, go to step
4. If you selected
one of the pacer
programs, two
columns of bars
will appear in the
display. The left
column will show
one bar, showing that the target pace is 40 strides
per minute. The right column will show your actual
pace. Adjust your pace until only one bar appears
in the right column. As the program progresses,
the target pace will change periodically; as the
target pace changes, adjust your pace to keep
both columns at the same height. Important: The
target pace is a goal pace. Your actual pace
may be slower than the target pace, especially
during the first few months of your exercise
program. Be sure to exercise at a pace that is
comfortable for you.
Follow your progress with the monitor modes
When the power
is turned on, the
scan mode will
automatically be
selected. One
mode indicator
will show that the
scan mode is
selected, and a
flashing mode
indicator will show which mode is currently
displayed. Note: If you select a different mode, you
can select the scan mode again by repeatedly
pressing the mode button.
If desired, you can select the reps per minute,
time, distance, fat calories, or calories mode for
full-time display. To select one of these modes,
repeatedly press the mode button. The mode
indicators will show which mode is selected.
(Make sure that the scan mode is not selected.)
If desired, the display can be reset by pressing
the on/reset button.
Turn off the power
To turn off the power, simply wait for about
four minutes. If the pedals are not moved and
the console buttons are not pressed for four
minutes, the power will turn off automatically.
1
2
Program Indicator
4
Target Pace Actual Pace
3
5
Mode Indicators
10
MAINTENANCE
CONSOLE TROUBLE-SHOOTING
If the console does not function properly, the batteries
should be replaced. To replace the batteries, see
assembly step 5 on page 6. In addition, make sure
that the extension wire is plugged into the console.
(See assembly step 1 on page 5.)
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, the Side Shield (27) must first be removed.
Remove the 5/16Ó x 3/4Ó Tap Screw (18) from the left
Crank Arm (10). Slide the left Crank Arm off the Crank
Shaft (11). Remove the right Crank Arm (not shown) in
the same way.
Remove the three #8 x 3/4Ó Tec Screws (42) from
each side of the Side Shield (27).
Hold the Side Shield (27) near the back and pull it
apart slightly until the Side Shield can be lifted off the
ends of the Crank Shaft (11). Remove the Side Shield.
Do not pull the Side Shield apart at the top or the
seam may be broken.
Next, locate the
Reed Switch (48).
Turn the Pulley
(19) until the
Magnet (55) is
aligned with the
Reed Switch.
Loosen, but do
not remove, the
#10 x 1/2Ó Tec
Screw (51). Slide
the Reed Switch
slightly closer to or farther away from the Magnet.
Make sure that the Magnet will not hit the Reed
Switch. Retighten the Tec Screw. Turn the Pulley for a
moment. Repeat until the console displays correct
feedback. When the Reed Switch is correctly adjusted,
reattach the side shield and the crank arms.
HOW TO ADJUST THE RESISTANCE STRAP
If the pedals do not have enough resistance, even
when the resistance knob is turned to the maximum
setting, the Resistance Strap (31) may need to be
adjusted. To adjust the Resistance Strap, the side
shield must first be removed. Refer to the instructions
at the left to remove the side shield.
Turn the resistance knob to the lowest setting. (See
HOW TO ADJUST THE RESISTANCE OF THE
PEDALS on page 7.) Grip the end of the Resistance
Strap (31) and
pull it away from
the rest of the
Strap. Next, pull
the end of the
Strap up to
remove any
slack. Then press
the end of the
Strap against the
rest of the Strap
as shown. Turn
the pulley for a
moment to make sure that there is not too much
resistance. When the Resistance Strap is properly
adjusted, reattach the side shield and the crank arms.
48
31
55
51
19
27
10
11
18
Back
To p
42
HOW TO ADJUST THE DRIVE BELT
If the Drive Belt (32) slips as you exercise on the
ECLIPSE II, the Drive Belt should be adjusted. To
adjust the Drive Belt, the side shield must first be
removed. Refer to the instructions on page 10 and
remove the side shield.
Next, loosen the
two 3/8Ó Nylon
Jam Nuts (23)
(there is one on
each side of the
Flywheel [20]).
To tighten the
Drive Belt (32),
turn the two
1/4Ó Nylon
Locknuts (26)
clockwise; to
loosen the Drive
Belt, turn the Nylon Locknuts counterclockwise. Make
sure that the Flywheel is straight and retighten the 3/8Ó
Nylon Jam Nuts (23). When the Drive Belt is properly
adjusted, reattach the side shield and the crank arms.
11
20
23
26
32
12
CONDITIONING GUIDELINES
The following guidelines will help you to plan your
exercise program. Remember that proper nutrition and
adequate rest are essential for successful results.
WARNING: Before beginning this or any exercise
program, consult your physician. This is especially important for individuals over the age of 35 or
individuals with pre-existing health problems.
WHY EXERCISE?
Exercise has proven essential for good health and
well-being. Participation in a well-rounded exercise
program helps to develop a stronger and more efficient heart, improved respiratory function, increased
stamina, better weight management, increased ability
to handle stress, and greater self-esteem.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. For effective exercise, your heart
rate should be maintained at a level between 70% and
85% of your maximum heart rate as you exercise. This
is known as your training zone. You can find your training zone in the table below. Training zones are listed
according to age and physical condition.
Burning Fat
To burn fat effectively, you must exercise at the proper
intensity level for a sustained period of time. During
the first few minutes of exercise, your body uses easily accessible carbohydrate calories for energy. Only
after the first few minutes does your body begin to use
stored fat calories for energy. If your goal is to burn
fat, it may be helpful to use the Fat Burn program to
help you to reach your goal. (See pages 11 and 12.)
Aerobic Exercise
If your goal is to strengthen your cardiovascular system, your exercise must be Òaerobic.Ó Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For effective aerobic
exercise, it may be helpful to use the Aerobic program
to help you to reach your goal. (See pages 11 and 12.)
To develop greater stamina, you may choose the
Interval program to help you to reach your goal. (See
pages 11 and 12.)
HOW TO MEASURE YOUR HEART RATE
To measure your heart rate, stop exercising and place
two fingers on your wrist as shown. Take a six-second
heartbeat count,
and multiply the
result by ten to
find your heart
rate. (A sixsecond count is
used because
your heart rate
drops quickly
when you stop
exercising.) If
your heart rate
is too high, decrease the intensity of your exercise. If
your heart rate is too low, increase the intensity of
your exercise.
WORKOUT GUIDELINES
A proper workout includes the following parts:
A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases the
body temperature, heart rate, and circulation in preparation for exercise.
TRAINING ZONE (BEATS/MIN.)
AGE CONDITIONEDUNCONDITIONED
20
25
30
35
40
45
50
55
60
65
70
75
80
138Ð167
136Ð166
135Ð164
134Ð162
132Ð161
131Ð159
129Ð156
127Ð155
126Ð153
125Ð151
123Ð150
122Ð147
120Ð146
133Ð162
132Ð160
130Ð158
129Ð156
127Ð155
125Ð153
124Ð150
122Ð149
121Ð147
119Ð145
118Ð144
117Ð142
115Ð140
13
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the
right. Move slowly as you stretchÑnever bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings,
back of knees and back.
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back and groin.
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place
your hands against a wall. Keep your back leg straight and
your back foot flat on the floor. Bend your front leg, lean forward and move your hips toward the wall. Hold for 15 counts,
then relax. Repeat 3 times for each leg. To cause further
stretching of the achilles tendons, bend your back leg as well.
Stretches: Calves, achilles tendons and ankles.
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and
grasp one foot with your other hand. Bring your heel as close
to your buttocks as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Quadriceps and hip
muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward. Pull your feet toward your groin area as far as possible.
Hold for 15 counts, then relax. Repeat 3 times. Stretches:
Quadriceps and hip muscles.
1
2
3
4
5
A cardiovascular exercise period, including 20 to
30 minutes of exercise with your heart rate in your
training zone.
A cool-down, with 5 to 10 minutes of stretching.
Thorough stretching helps to offset problems caused
when you stop exercising suddenly. Stretching after
exercise is also very effective for increasing flexibility.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exercise, you may complete up to five workouts each
week, if desired. Find the best time of day for your
workouts, and then stick with it.
14
PART LISTÑModel No. WLEL45070 R1197A
Specifications are subject to change without notice. See the back cover of this manual for information about
ordering replacement parts.
Key No. Qty. Description
1 1 Base
2 1 Upright
3 2 Pedal Leg
4 2 Pedal Bracket
5 2 Extension Tube
6 1 Left Handlebar
7 1 Right Handlebar
8 2 Pedal Bolt
9 2 1/2Ó Nylon Jam Nut
10 2 Crank Arm
11 1 Crank Shaft
12 2 Crank Bearing
13 2 Bearing Cup
14 1 Keyed Washer
15 1 Slotted Crank Nut
16 1 Tri-notch Crank Nut
17 1 Crank Nut
18 2 5/16Ó x 3/4Ó Tap Screw
19 1 12Ó Pulley
20 1 Flywheel w/Hub
21 1 Flywheel Axle
22 2 3/8Ó Flat Washer
23 2 3/8Ó Nylon Jam Nut
24 2 1/4Ó Eyebolt
25 2 Adjustment Bracket
26 2 1/4Ó Nylon Locknut
27 1 Side Shield
28 2 Bearing Washer
29 2 Pedal Cover
30 1 Resistance Strap Bracket
31 1 Resistance Strap
32 1 Drive Belt
33 1 Resistance Cable w/Spring
34 1 Resistance Knob
35 2 Handgrip
Key No. Qty. Description
36 2 Extension Tube Endcap
37 2 Lock Pin
38 2 Crank Washer
39 8 Pedal Leg Bushing
40 4 Handlebar Bushing
41 2 Crank Spacer
42 27 #8 x 3/4Ó Tec Screw
43 2 3/4Ó Axle Cap
44 1 Cable Bracket
45 2 5/8Ó Axle Cap
46 2 Handlebar Spacer
47 4 Stabilizer Endcap
48 1 Reed Switch/Sensor Wire
49 1 Extension Wire
50 1 Reed Switch Clamp
51 1 #10 x 1/2Ó Tec Screw
52 1 Console
53 1 Cable Cover
54 4 3/8Ó Nylon Locknut
55 1 Magnet
56 1 Clamp Bolt
57 4 1/4Ó Flat Washer
58 1 1/4Ó Nylon Locknut
59 1 Resistance Strap Hook
60 1 Battery Cover
61 2 Flywheel Bearing
62 2 Pedal Leg Spacer
63 2* Tree Fastener
# 1 UserÕs Manual
# 1 Grease Packet
* Extra Tree Fasteners may be included
# This part is not illustrated
35
42
42
43
27
36
5
40
45
7
40
46
42
53
33
34
52
60
42
42
2
45
40
46
40
36
5
39
43
42
42
29
54
37
47
42
4
4
29
42
42
42
39
8
3
61
21
42
30
22
23
24
25
26
33
42
44
18
11
9
10
41
39
32
47
19
16
12
13
50
51
48
47
13
15
17
9
12
14
18
10
41
39
8
3
47
1
58
57
59
57
56
20
61
22
23
24
25
26
39
31
55
6
49
49
63
63
62
28
38
38
62
EXPLODED DRAWINGÑModel No. WLEL45070 R1197A
15
Part No. 142265 G03916-C R1197A Printed in USA © 1997 ICON Health & Fitness, Inc.
HOW TO ORDER REPLACEMENT PARTS
To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be
prepared to give the following information when calling:
¥ The MODEL NUMBER of the product (WLEL45070).
¥ The NAME of the product (WESLO¨ECLIPSE II elliptical exerciser).
¥ The SERIAL NUMBER of the product (see the front cover of this manual).
¥ The KEY NUMBER and DESCRIPTION of the part(s) from page 14 of this manual.
WESLO¨is a registered trademark of ICON Health & Fitness, Inc.
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warranty extends only to the original purchaser. ICONÕs obligation under this warranty is limited to replacing or repairing, at ICONÕs option, the product at one of its authorized service centers. All
products for which warranty claim is made must be received by ICON at one of its authorized service centers with all freight and other transportation charges prepaid, accompanied by sufficient proof of purchase.
All returns must be pre-authorized by ICON. This warranty does not extend to any product or damage to
a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or
repairs not provided by an ICON authorized service center, to products used for commercial or rental purposes, or to products used as store display models. No other warranty beyond that specifically set forth
above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON Health & Fitness, Inc. 1500 S. 1000 W., Logan, UT 84321-9813
Loading...