Page 1
SKIER PLUS
SEARS
Model No. 831.290740
Serial No.
Write the serial number in the space
above for reference.
Sedal
Number
Decal
_'- X I_ RC I S E
EO u I P I_I ENT
|olII I| I lel _ |I
HELPLINEI
1-800-736-6879
USER'S MANUAL
cAuTION
Read all precautions and instruc-
tions In this manual before using
this equipment. Save this manual
for future reference.
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179
Page 2
TABZ K)i = ; 3 NTENTS
IMPORTANT PRECAUTIONS ............................................................. 2
BEFORE YOU BEGIN ................................................................. .8
ASSEMBLY .......................................................................... .4
HOW TO USE THE ARC SKIER PLUS ..................................................... .5
MAINTENANCE AND TROUBLE-SHOOTING ................................................. 8
CONDITIONING GUIDELINES . .._ ........................................................ 9
PART LIST ........................... .".............................................. 10
EXPLODED DRAWING ........................................................ ......... 11
ORDERING REPLACEMENT PARTS ............................................... Back Cover
FULL 90 DAY WARRANTY ........................................................ Back Cover
2
Page 3
BEFORE YOU BEGIN
Thank you for selecting the Innovative WESLO °
ARC SKIER PLUS cross-country skier. Cross-country
skiing is one of the most effectiveexercises for increas-
ing cardiovascular fitness, buildingendurance, and ton-
ing the muscles. The ARC SKIER PLUS features ultra-
smooth skiing pedals, ergonomic curved ski roils, upper
body arms, and adjustable resistance to let you enjoy
this dynamic exercise in the convenience of your home.
For your benefit, read this manual carefully before
you use the ARC SKIER PLUS. If you have additional
questions, please call our toll-free HELPLINE at 1-800-
736-6879, Monday through Saturday, 7 a.m. until 7
p.m. Central "rime (excluding holidays). To help us
assist you, please note the product model number and
serial number before calling. The model number is
831.290740. The serial number can be found on a
decal attached to the cross-country skier (see the front
cover of this manual for the location).
Before reading further, please review the drawing
below and familiarize yourself with the pads that are
labeled.
Console
Resistance Knob
_"_\\ / tWaerBON_tett_eBoHttlder
_ not included)
=__ Upper Body Arms
_/_ --Lock Pin
• Storage Hole
Updght
Lock Knob
: FRONT
Ski Rails
BACK
RIGHT SIDE
3
Page 4
ASSEMBLY
For your convenience, the ARC SKIER PLUS is shipped assembled in the stowaway position. Follow the instruc-
tionsbelow to set up the ARC SKIER PLUS. No tools are required.
1. Raise the Upright (26) to the position shown. Slide
the M10 Washer (18) onto the Lock Knob (30). Insert
the Lock Knob into the indicated bracket and tighten
the Lock Knob Into the lower end of the UpdghL
2. The Console (27) requires two "AA"batteries (not
included).Alkaline batteries are recommended.
To installbatteries, first slide up the Battery Cover
(46). Carefully remove the battery clip from the
Console (27). Insert two batteries into the battery
clip. Make sure that the negative (-) ends of the
batteries are touching the springs. Insert the bat-
tery clip intothe Console and close the Battery
Cover.
3. Before using the cross-countryskier, the included all-
icon oil shouldbe applied. Apply a few drops of sili-
con all to the Ski Rails (1) where the Ski Pedal
Wheels (23) make contact.
3O
Battery Clip
1---Apply Silicon Oil
Make sure that all pads are securely tightened. The use of the remaining parts will be explained in the following
section.
4
Page 5
HOW TO USE THE ARC SKIER PLUS
HOW TO ADJUST THE RESISTANCE OF THE SKI
PEDALS
To vary the Intens'dyof your exercise, the resistance
of the ski pedals can be adjusted. The resistance is
controlled with the Resistance Knob (41) at the back
of the cress-country skier. CAUTION: Always dis-
mount the cross-country skier before adjusting
the resistance of the ski pedals.
To increase the
resistance of
the ski pedals,
turn the
Resistance
Knob (41)
clockwise; to
decrease the
resistance, turn
the Knob coun-
terclockwise.
Note: The
41
cords connecting the ski pedals may stretch slightly
when the cross-country skier is first used. If neces-
sary, turn the Knob clockwise to remove any slack
from the cords. If there is slack in the cords, the cords
may slip off the pulleys at the ends of the ski rails.
The intensity of your exercise can also be vaded by
using the upper body arms (see the section below), or
by changing the pace of your exercise.
HOW TO USE THE UPPER BODY ARMS IN THE
DUAL-MOTION POSITION
The Upper
Body Arms
(24, 25_ can be
used in either
the dual-
motion position !9
or the station-
ary position. To
use the Upper
Body Arms in
the dual-
motion posi-
tion, remove
the Lock Pin (29) from the Upper Body Arms and the
Updght (26). Insert the Lock Pin into the storage hole.
b
The resistance of the Upper Body Arms (24, 25) can
be adjusted with the Resistance Dial (19) on the side
of the cross-cguntry skier (see the drawing above). To
increase the resistance, turn the Dial clockwise; to de-
crease the resistance, turn the Dial counterclockwise:
TO exercise,
holdbothUpper
BedyArms(24,
25), step onto
the SId Pedals
(33), and center
your feet on the
Pedals. The cor-
rectform for
exercisingon
the cross-coon-
try skier is simi- 33
lar to the motion
of walking. Move
yourarms and
legs forwardand
backwardwith a
smooth,continu-
ous motion.Be
sure to keep
your back straightand your knees bent slightly.
For effective aerobic exercise, short, rapid strides at
low resistanceare recommended. To strengthen the
muscles, long, slow stridesat higher resistance are
recommended.
HOWTO USE THE UPPER BODYARMS IN THE
STATIONARY POSITION
To use the
Upper Body
Arms (24, 25) in
the stationary
position,align
the holes in the
Upper Body 29
Arms with the
hole in the
Upright (26).
insertthe Lock
Pin (29) through
all pads. Note: If
it is difficultto insert the Lock Pin, do not hit the Lock
Pin. Twist the Upper Body Arms slightly in order to
align the holes.
Next, tighten the Reststarv_ Knob (19) on the side of
the cross-countryskier (see the drawing above).
To use the Upper BodyArms (24, 25) in the stationary
position, exercise as described at the top of this page,
but hold the Upper Body Arms for support and use
only your legs.
Page 6
DIAGRAM OF THE CONSOLE
_N. 2018161412108642M_
_1 Interval )
ACTUAL 5CAN°CALS'FAT CAL5
I.- i'
2
3
mm
PROGRAM REPS MIN.TIME°DISTANCE
nmmmlmmmmmm
i=====-- '=mmm
_2 Aeroblc )
I
ON/RESET MODE PROGRAM
AUTO OFF
DIGITAL PACER ELECTRONICS
mmimmi mmm 90
n==m== lmmmm
m=======_mm
iKIHHHB(HIH
mm_m_mmmmmm
mmlm_mm_Bm 40
3Fat Burn) Note: If there is a thin sheet of clear plastic on the
face of the console, remove it.
I
I
DESCRIPTION OF THE CONSOLE
The innovative console offers a manual mode and
three pacer programs. The pacer programs are
designed to help you achieve specific exercise goals
by pacing your exercise. The programs include a sta-
mina-building Interval program, an Aerobic program,
and a special Fat Bum program. Whether you select
the manual mode or one of the pacer programs, the
console will provide continuousexercise feedback dur-
ing your workouts. Please read pages 6 and 7 before
operating the console.
HOW THE PACER PROGRAMS OPERATE
When you use a
pacer program,
two columns of
bars will appear in
the display. The
leftcolumn will
show a target
pace; the right
column will show
your actual pace.
PrOgRAMM,N-
Target Pace Actual Pace
The target pace will change periodically during the
program; as the target pace changes, simply adjust
your pace to keep both columns at the same height.
The graphs on the left sideof the console show how
the target pace will change duringthe programs.
Look at the Interval graph for a moment (see the draw-
ing above). The graph is divided intoten columns, with
six bars in each column. The columns represent two-
minute time periods, and the red bars show what the
target pace will be. For example, in the first column
there is one red bar. This shows that during the first
two minutes ofthe program, the target pace will be 40
repetitions (strides) per minute (see the scale at the
right end of the graph). In the second column there are
five red bars. This shows that duringthe second two-
minute time period, the target pace will be 80 strides
per minute. Note: Because there are ten two-minute
periods, each program will last fortwenty minutes.
DESCRIPTION OF THE MONITOR MODES
The six monitor modes previde continuous exercise
feedback. The modes are described below.
• Calodes (CALS)--This mode shows the approxi-
mate number of calories you have burned. (This
number includes both fat calories and carbohydrate
calories. See BURNING FAT on page 9.)
• Fat calories (FAT CALS)_This mode shows the
approximate number of fat calories you have
burned. (See BURNING FAT on page 9 for an
explanation of fat calories.)
• Reps per minute (REPS MlN)--This mode shows
your pace, in repetitions (strides) per minute.
Page 7
• Time--If you select one of the three pacer pro-
grams, this mode will count down the time remain-
ing in the program. If you select the manual mode,
this mode will count up the length oftime you have
exercised. Note: If you stop exercising for ten sec-
onds or longer, the time mode will pause.
• Distance--This mode shows the total number of
repetitions (strides) you have completed, up to 999.
The display will then reset to zero and continue
counting.
• Scan--This mode displays the celories, fat calories,
reps per minute, time, and distance modes, for 5
seconds each, in a repeating cycle.
STEP-BY-STEP CONSOLE OPERATION
Before the console can be operated, two "AA" bat-
teries must be installed. (See assembly step 2 on
page 4 for installation instructions.) Follow the steps
below to operate the console.
I!
Turn on the power
To turn on the
power, press
the on/reset
button or sim-
ply begin exer-
cising on the
cross-country skier. When the power is turned on,
the entire display willappear for two seconds. The
console will then be ready for use. Note: If batter-
ies were just installed, the power will already be
on.
F_ Select one of the three pacer programs or the
manual mode
To select one of
the pacer pro-
grams, repeat-
edly press the
program button.
The program
indicator will
show which
program you
have selected.
i
flOGIL4_ II[,S/4_I*Tk_IE*D_TA_€|
ONIIIIII _,.O_ FIC)GU_ i
To select the manual mode, press the program
button until the program indicator disappears. The
programs will be selected in the followingorder:.
program 1 (Interval), program 2 (Aerobic), pro-
gram 3 (Fat Bum), manual mode.
lg
B
[]
Begin your workout
Ifyou selected
the manual
mode, go to
step 4. If you
selected one
of the pacer
progrems, two
columnsof
bars will
appear in the
ACTUAL 5CAN*C
Ill
TM
--
_,. ,
P_(_RAM _PS MIN"
Target Pace Actual Pace
display.The left column will show one bar, show-
ing that the target pace Is 40 strides per minute.
The fight column will show your actual pace.
Adjust your pace untilonly one bar appears in the
fight column. As the program progresses, the tar-
get pace willchange periodically; as the target
pace changes, adjust your pace to keep both
columns at the same height.
Follow your progress with the monitor modes
When the
power is
turned on, the
scan mode will
automatically
be selected.
One mode
indicatorwill
show that the
scan mode is
selected, and
Mode Indicators
I0001
ir-- rtl
a flashingmode indicator will show which mode is
currentlydisplayed. Note: When a different mode
is selected, you can select the scan mode by
repeatedly pressingthe mode button.
If desired, you can select the calories, fat calories,
reps per minute, time, or distance mode for full-
ti_e display. To select one of these modes,
repeatedly press the mode button. The mode indi-
c_l.torswill show which mode is selected. (Make
sure that the scan mode isnot selected.)
If desired, the display can be reset by pressing
the on/reset button.
Turn off the power
To turn off the power, simply walt for about
four minutes. If the ski pedals are not moved
and the console buttons are not pressed for four
minutes, the power will turn off automatically in
order to conserve the batteries.
7
Page 8
MAINTENANCE AND TROUBLE-SHOOTING
Regularly Inspect and tighten all pads of the cross-
country skier. Besure to tighten all of the screws
that attach the ski rails. Once every three months,
apply a few drops of light multi-purpose oil to the hubs
of the pulleys at the ends of the cross-country skier.
CONSOLE
If the console does not function properly, or if the dis-
play becomes faint, the batteries should be replaced.
See assembly step 2 on page 4 for installation
instructions.
SKI PEDALS
The cordscon-
nectingthe ski
pedals may
stretch slightly
when the
cross-country
skier isfirst
used. If neces-
sary, turn the
Resistance
Knob (41)
41
clockwiseto remove any slack from the cords. If there
is slack in the cords, the cords could slip off the pul-
leys at the ends of the ski roils.
If the move-
ment of the Ski 1 33
Pedals (33)
becomes
roughor noisy,
clean the Ski
Rails (1) and 23
the Ski Pedal
Wheels (23)
with a soft, dry cloth. Next, apply silicon oil to the Ski
Railswhere the Ski Pedal Wheels make contact.
(Siliconoil is available at most automotive and hard-
ware stores.) Apply silicon oll at least once every
three months.
Ifthe movement of the Ski Pedals (33) is still rough,
the Ski Pedal Wheels (23) may need to be replaced.
See ORDERING REPLACEMENT PARTS on the
back cover of this manual.
UPPER BODY ARMS
If a squeaking sound Is heard when the upper body
arms are moved, a small amount of grease may be
applied. Refer to the drawing below. Turn the
Resistance
counter- 25
clockwise 24
and remove
it. Remove ",
the M10 21
Washer _'.' 18
(18). Using Apply1/ _'_-_/A/19
pliers, grip Grease
the head of
the M10
Carriage Bolt (21) and remove it. Apply a thin film of
grease to both sides of the Upper Body Arms (24, 25)
in the indicated locations. Reattach all pads, making
sure that they are in the positions shown.
STORAGE
When the
cross-country
skier is not in
use, itcan be 26
folded to the
compact stow-
away position.
Remove the
Lock Knob (30)
and M10
Washer (18)
from the lower end of the Upright (26). Fold down the
Upright. Thread the Lock Knob and the MIO Washer
intothe Upright for storage.
8
Page 9
CONDITIONING GUIDELINES
The following guidelines will help you to plan your
exemise prugram. Remember that proper nutdfion and
adequate rest are essential for successful results.
WARNING: Before beginning this or any exercise
program, consult your physician. This is especial-
ly important for Individuals over the age of 35 or
Individuals with pre-existing health problems.
WHY EXERCISE?
Exercise has proven essential for good health and
well-being. Participafion in a well-rounded exercise
program helps to develop a stronger and more effi-
cient head, improved respiratory function, increased
stamina, better weight management, increased ability
to handle stress, and greater self-esteem.
EXERCISE INTENSITY
Whether your goal is to bum fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity
and for the appropriate duration. The proper intensity
level can be found by using your heart rate as a guide.
For effective exercise, your heart rate should be main-
tained at a level between 70% and 85% of your maxi-
mum heart rate as you exercise. This is known as your
training zone. You can find your training zone in the
table below. Training zones are listed according to age
and physical condition.
TRAINING ZONE (BEATS/MIN.)
AGE UNCONDITIONED CONDITIONED
20 138-167 133-162
25 136-166 132-160
30 135-164 ;I30-158
35 134-162 129-156
40 132-161 127-155
45 131-159 126-153
50 129-156 124-150
55 127-155 122-149
60 126-153 121-147
65 125-151 119-145
70 123-150 118-144
75 122-147 117-142
80 120-146 115-140
85 118-144 114-139
Burning Fat
To bum fat effectively, you must exercise at the proper
intensitylevel for a sustained period of time. Dudng
the firstfew minutes of exercise, your body uses easi-
lyaccessible carbohydrate calodas for energy. Only
after the firstfew minutes does your body begin to use
stored fat calories for energy. If your goal isto bum
fat, it may be helpful to use the Fat Bum program to
help you to reach your goal. (See pages 6 and 7.)
Aerobic Exercise
Ifyour goal is to strengthen your cardiovascular sys-
tem, your exercise must be =aerobic." Aerobic exercise
is activity that requires large amounts of oxygen for
prolongedperiods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungsto oxygenate the blood. For effective aerobic
exercise, it may be helpful to use the Aerobic program
to help you to reach your goal. (See pages 6 and 7.)
To develop greater stamina, you may choose the
Interval program to help you to reach your goal. (See
pages 6 and 7.)
HOW TO MEASURE YOUR HEART RATE
To measure your heart rate, stop exercising and place
two fingers on your wast as shown. Take a six-second
heartbeat count,
and multiplythe
resultby ten to
find your heart
rate. (A six-sec-
ond count is
used because
your heart rate
drops quickly
when you stop
exercising.) If
your heart rate
is too high, decrease the intensity of your exercise. If
your heart rate is too low, increase the intensity of
your exercise.
WORKOUT GUIDELINES
A proper workout includes the following parts:
A warm-up, lasting 5 to 10 minutes. Begin with slow,
controlledstretches, and progress to more rhythmic
stretches. This will increase the body temperature,
heart rate, and circulation in preparation for strenuous
exercise.
.9
Page 10
A cardiovascular exercise period, including 20 to 30
minutes of exemise with your heart rate in your train-
ing zone.
A cool-down, with 5 to 10 minutes of stretching.
Thorough stretching offsets problems caused when
you stop exercising suddenly. Stretching for increased
flexibilityis also most effective following exercise. A
proper ccol-down should leave you feeling relaxed and
comfortably tired.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three
workouts each week, with at least one day of rest
b_,'ween workouts. After a few months of regular exer-
rise, you may complete up to five workouts each
week, if desired. Find the best time of day for your
workouts, and then stick with iL Remember, the key to
success is to make exercise a regular and enjoyable
part of your everyday life.
PART LISTmModel No. 831.290740
R0896A
Key Pad Key Pa_
No. Qty. No. Descd_lon No. Qty. No. Descdptlon
1 2 132103 Ski Rail 29 1 132104 Lock Pin
2 1 132118 Rear Stabilizer 30 1 132106 Lock Knob
<_ 3 2 132099 Right Front/Left Rear Leg 31 1 103502 M8 x 19mm Screw
4 1 132109 Left Ski Pedal 32 2 132120 Left Front/Right Rear Leg
5 4 132096 Pulley 33 2 132110 Ski Pedal Cover
6 2 132111 Ski Pedal Cord 34 6 121572 M6 Spacer
7 1 132095 M10 x 60mm Bolt 35 1 127201 Reed Switch/Wire
8 8 012022 M6 Nut 36 4 132273 1/4" Threaded Rod
9 6 013141 M6 x 26ram Screw 37 4 112441 Ski Rail Endcap
10 8 132117 M6 Machine Screw 38 4 132100 Rubber Pad
11 1 132105 Right Ski Pedal 39 4 013141 M8 x 12mm Screw
12 2 110277 M6 x 9ram Screw 40 12 132116 M8 x 25mm Screw
13 3 016055 Adhesive Wire Clamp 41 1 132114 Resistance Knob
14 1 110278 Magnet 42 1 132112 Plastic Sleeve
15 1 113400 Console Wire 43 1 132284 Pulley Bracket
16 1 132279 Arm Bracket 44 8 132285 M6 Screw
17 1 132119 Front Stabilizer 45 2 059008 Pedal Bumper
18 3 132108 M10 Washer 46 1 132121 Battery Cover
19 1 132114 Resistance Dial 47 2 127891 M10 Spacer
20 2 132280 M6 x 16ram Bolt 48 12 132115 M4 Screw
21 1 132281 M10 Carriage Bolt 49 2 132101 Rail Pad
22 8 127551 M6 x 26ram Bolt 50 1 012033 M10 Nut
23 8 132113 Ski Pedal Wheel 51 2 013311 #10 x 1" Screw
24 1 132278 Right Upper Body Arm 52 4 132288 Support Plate
25 1 132277 Left Upper Body Arm 53 4 132287 Threaded Plate
26 1 132102 Upright # 1 132496 User's Manual
27 1 131478 Console # 1 132289 Silicon Oil
28 2 105025 Foam Grip
Note: =#" Indicates a non-lilustrated part. See the back cover of this manual for nformaUon about ordering
replacement parts. Specifications are subject to change without notice.
10
Page 11
EXPLODED DRAWING--Model No. 831.290740 R0898A
33
37
40
18
41
I I
I
I
I
/
9
6
21
51
13
37
4O
11
7
38
39
24
18
19
29
40
10
I
38
I
I I
I I
48
6
Page 12
SEARS
Model No. 831.290740
QUESTIONS?
If you find that:
• you need help assembling or
operating the WESLO" ARC
SKIER PLUS
• a part is missing
• or you need to schedule repair
service
call our toll-free HELPLINE
1-800-736-6879
Monday-Saturday, 7 am-7 pm
Central Time (excluding holidays)
REPLACEMENT
PARTS
if parts become worn and need to
be replaced, call the following toll-
free number
1-800-FON-PART
(1-800-366-7278)
The model number and serial number of your WESLO ° ARC
SKIER PLUS are listedon a decal attached to the frame. See the
frontcover of this manual to find the location of the decal.
AMreplacement pads are available for immediate purchase or
special order when you visit your nearest SEARS Service Center.
To request service or to order pads by telephone, call the toll-free
numbers listedat the left. .......
When requesting help or service, or ordering parts, please be
prepared to provide the following information:
• The MODEL NUMBER of the product (831.290740).
• The NAME of the product (WESLO" ARC SKIER PLUS cross-
country skier).
• The PART NUMBER of the PART (see the PART LIST and the
EXPLODED DRAWING on pages 10 and 11 of this manual).
• The DESCRIPTION of the PART (see the PART LIST and the
EXPLODED DRAWING on pages 10 and 11of this manual).
I FULL 90 DAY WARRANTY I
For 90 days from the date of purchase, if failureoccurs due to defect in material or workmanship in this
SEARS SKIER EXERCISER, contact the nearest SEARS Service Center throughout the United States
end SEARS will repair or replace the SKIER EXERCISER, free of charge.
This warranty does not applywhen the SKIER EXERCISER is used commercially or for rental purposes.
This warranty gives you specific legal rights,and you may also have other rights which Vary from state
to state.
SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179
Part No. 132496 F02662-C R0896A Printed in China © 1996 Sears, Roebuck and Co.
Loading...