Wells MOD-227TDM-AF User Manual
W E L L S M A N U F A C T U R I N G
WELLS
I T E M N O .
BUILT-IN MODULAR WARMERS
(12”x 27” WITH AUTOMATIC WATER FILL)
MOD-427TDM/AF
Wells 12” x 27” Built-in Modular Warmers with AutoFill easily meet your volume needs, designed
with 33% more capacity than the standard modular warmers. Water Fill System automatically maintains
water at the proper level in all pans at all times, enabling you to serve fresh hot food to every customer
throughout the day.
12”X27” BUILT-IN MODULAR WARMERS WITH AUTOFILL
Features
• All models have the automatic water fill
system that maintains the proper water level
in each pan through the use of a water sensor
and solenoid valve.
• These warmers are able to accommodate four
1/3-size pans up to 6” deep in each well.
• Each well is one-piece, deep-drawn, stainless
steel construction for maximum strength
and durability.
• Fully insulated for greater efficiency.
• A one-inch diameter drain manifold (DM)
is provided with each warmer to allow for
a single drain connection at the left or right
front corner.
• Individual thermostats (T) with positive-off
position give these warmers maximum versatility
on each well.
• Wellslok allows for quick and easy installation in
stainless steel countertops.
• The MOD series warmers are designed for wet
operation only.
• The MOD series Warmers are Underwriters
Laboratories, Inc. LISTED and meet the National
Sanitation Foundation and Canadian standards.
• A one-year warranty against defects covers
parts and labor.
Specifications
Temperature Settings: OFF/LO to HI
Weights: Lbs. KG
MOD-227 series:
Installed 49 22
Shipping 65 29
MOD-327 series:
Installed 71 32
Shipping 90 41
MOD-427 series:
Installed 97 44
Shipping 112 51
MOD-527 series:
Installed 116 53
Shipping 136 62
Accessories / Options
Wellslok Extension Kit, designed for installation in a
variety of countertops up to 1” thick, refer to installation
instructions, 22593
Drain Screen, 21709
Optional 72” Wiring, thermostatically
controlled warmers, priced per well
(standard length is 24”)
R A I S I N G T H E S T A N D A R D
W E L L S M A N U F A C T U R I N G
WELLS
C
RR
R
(248)
9 3/4
(44)
1 3/4
(197)
7 3/4
(749)
29 1/2
(57)
2 1/4
(776)
30 9/16
(457)
18
(159)
6 1/4
(356)
14
CONNECTION
1'' CONDUIT
OF MANIFOLD
EACH END
1'' FPT
CONNECTION
WATER LINE
1/4'' FPT
WELLS
C
RR
R
(44)
1 3/4
(248)
9 3/4
(197)
7 3/4
(356)
14
(159)
6 1/4
(889)
35
(776)
30 9/16
(57)
2 1/4
(1105)
43 1/2
CONNECTION
WATER LINE
1/4'' FPT
OF MANIFOLD
EACH END
1'' FPT
CONNECTION
1'' CONDUIT
LISTED STD.4 E6070
E6070
D I M E N S I O N S :
INCH
(MM)
M O D E L
M O D - 2 27 T D M / A F
B U I LT- I N M O D U L A R W AR M E R
W I T H A U TO M AT I C WAT E R F I L L
MINIMUM CLEARANCE REQUIRED FROM ALL
UNITS TO THE NEAREST SURFACE.
BACK SIDE BOTTOM FRONT
1 1 6 3/4 4 1/8
(25) (25) (171) (105)
M O D - 2 27 T D M / A F E L E C T R I C A L S P E C I F I C AT I O N S :
MODELS VOLTS WATTS
MOD-227TDM/AF 208 2480 6.0 6.0 10.3 11.9 NONE
MOD-227TDM/AF 240 3300 6.9 6.9 11.9 13.8 NONE
NOTE: Specifications are subject to change without notice. See installation instructions prior to
installing the unit. This document is not for installation purposes. The Drain Manifold with
Valve (1 inch FPT) is supplied
WELLS MANUFACTURI NG CO MPANY
2 ERI K CIRCLE, PO BOX 2 80, VERD I, NV 89 439 U.S.A. • USA P HON E: ( 775) 689-5700 • FAX : (775) 689-5972
FOR ORDE RS ON LY: (88 8) 356-5362 • FAX: (800) 356-5 142 • www.wellsbloomfield.com
A SP ECIA LTY EQU IP MENT COM PANY • 2000 WELLS M AN UFA CT UR ING • PR IN TE D IN TH E U.S. A. • 8/00 • REV (A) • PA RT N O. 30074 8
AMPS PER LINE PHASE 3 AMPS SINGLE POWER
L1 L2 L3
PHASE SUPPLY CORD
Loading...